Class List

Here are the classes, structs, unions and interfaces with brief descriptions:

[detail level 1234]

►NDumux	Make the local view function available whenever we use the grid geometry
►NBinaryCoeff
CAir_Mesitylene	Binary coefficients for water and mesitylene
CAir_Xylene	Binary coefficients for air and xylene
CBrine_CO2	Binary coefficients for brine and CO2
CBrine_CO2_Old	Old version of binary coefficients for CO2 and brine. Calculates molfraction of CO2 in brine according to Duan and Sun 2003 molfraction of H2O has been assumed to be a constant value For use with the actual brine_co2_system this class still needs to be adapted
CH2O_Air	Binary coefficients for water and air
CH2O_CH4	Binary coefficients for water and methane
CH2O_Component	Binary coefficients for water and another component
CH2O_Component< Scalar, Components::Constant< id, Scalar > >	Binary coefficients for water and a constant component
CH2O_HeavyOil	Binary coefficients for water and heavy oil as in SAGD processes
CH2O_Mesitylene	Binary coefficients for water and mesitylene
CH2O_N2	Binary coefficients for water and nitrogen
CH2O_O2	Binary coefficients for water and oxygen
CH2O_Xylene	Binary coefficients for water and xylene
CN2_O2	Binary coefficients for nitrogen and oxygen
►NCCMpfaDataHandleBases
CSystemMatricesHandle	Common base class to all handles. Stores arrays of the matrices involved in the interaction volume-local systems of equations. Apart from the transmissibility matrix we store those matrices that are needed e.g. for later face pressure reconstruction. The fluxes as well as the local systems of equations can be expressed as functions of the intermediate unknown face face values \(\bar{\mathbf{u}}\) and the known cell/Dirichlet values \(\mathbf{u}\) using the matrices \(\mathbf{A}\), \(\mathbf{B}\), \(\mathbf{C}\), \(\mathbf{D}\) and the vector of Neumann fluxes \(\mathbf{N}\) as follows:
CSystemVectorsHandle	Common base class to all handles. Stores arrays of the vectors involved in the interaction volume-local systems of equations
►NComponents
CAir	A class for the air fluid properties
CBase
CBenzene	A simple benzene component (LNAPL)
CBrine	A class for the brine fluid properties
CCalcite	A class for the CaCO3 mineral phase properties
CCalciumIon	A class for the Ca2+ (Calcium ion) component properties
CCaO	A class for the CaO properties
CCaO2H2	A class for the CaO2H2 properties
CCarbonateIon	A class for the CO3 fluid properties
CCH4	Properties of pure molecular methane \(CH_4\)
CCO2	A class for the CO2 fluid properties
CConstant	A component which returns run time specified values for all fluid properties
CGas	Interface for components that have a gas state
CGranite	Properties of granite
CH2	Properties of pure molecular hydrogen \(H_2\)
CH2O	Material properties of pure water \(H_2O\)
CHeavyOil	Properties of the component heavyoil
CIon	Interface for components that are ions
CIsAqueous
CIsAqueous< Brine< Scalar, H2O > >
CIsAqueous< H2O< Scalar > >
CIsAqueous< SimpleH2O< Scalar > >
CIsAqueous< TabulatedComponent< RawComponent, useVaporPressure > >
CLiquid	Interface for components that have a liquid state
CMesitylene	Mesitylene
CModifiedCaO	A class for the ModifiedCaO properties
CN2	Properties of pure molecular nitrogen \(N_2\)
CNaCl	A class for the NaCl properties
CO2	Properties of pure molecular oxygen \(O_2\)
CSimpleH2O	A much simpler (and thus potentially less buggy) version of pure water
CSolid
CTabulatedComponent	Tabulates all thermodynamic properties of a given untabulated chemical species
CTrichloroethene	A simple implementation of TCE as exemplary component for a dense NAPL
CXylene	Properties of xylene
►NDetail
►NStaggered
CJacobianTypeImpl
CSubDomainFVGridGeometryImpl
CSubDomainFVGridGeometryImpl< SubDomainTypeTag, 0 >
CSubDomainFVGridGeometryImpl< SubDomainTypeTag, 1 >
CSubDomainGridVariablesImpl
CSubDomainGridVariablesImpl< SubDomainTypeTag, 0 >
CSubDomainGridVariablesImpl< SubDomainTypeTag, 1 >
CSubDomainJacobianMatrixImpl
CSubDomainJacobianMatrixImpl< SubDomainTypeTag, 0 >
CSubDomainJacobianMatrixImpl< SubDomainTypeTag, 1 >
CSubDomainPrimaryVariablesImpl
CSubDomainPrimaryVariablesImpl< SubDomainTypeTag, 0 >
CSubDomainPrimaryVariablesImpl< SubDomainTypeTag, 1 >
CSubDomainSolutionVectorImpl
CSubDomainSolutionVectorImpl< SubDomainTypeTag, 0 >
CSubDomainSolutionVectorImpl< SubDomainTypeTag, 1 >
CAxisData	In Axis Data stored per sub face
CAxisData< GridView, 1 >	In Axis Data stored per sub face
CConcatSeq
CConcatSeq< std::index_sequence< Is1... >, offset, std::index_sequence< Is2... > >
CcreateMultiTypeBlockMatrixType	Helper class to create a multitype matrix given the diagonal matrix blocks
ChasState	Helper struct detecting if a PrimaryVariables object has a state() function
CInAxisVelocities
CInAxisVelocities< Scalar, 1 >
CisParallelAMGBackend
CisParallelAMGBackend< Dumux::ParallelAMGBackend< GV, T > >
CisUG
CMultiDomainMatrixType	Helper alias to create the JacobianMatrix type
CMultiDomainTupleSharedPtr	Helper alias to create a tuple of shared_ptr<...> from an indexed type
CMultiDomainTupleSharedPtrConst	Helper alias to create a tuple of shared_ptr<const ...> from an indexed type
CPairData	Parallel Data stored per sub face
CsupportsPartialReassembly	Helper struct detecting if an assembler supports partial reassembly
CVolVarsWithOutPVSwitch
CVolVarsWithPVSwitch	Helper structs to conditionally use a primary variable switch or not
►NEmbeddedCoupling
CExtendedSourceStencil	A class managing an extended source stencil
►NFCGridManagerChecks
CFulfillConditions
CFulfillConditions< checkDimWorld, G1, G2 >
CFulfillConditions< checkDimWorld, G1, Gs... >
►NFluidSystems
►NDetail
CBrineCO2Indices	Class that exports some indices that should be provided by the BrineAir fluid system. The indices are chosen dependent on the policy, i.e. if a simplified pseudo component Brine is used or salt is considered an individual component
CBrineCO2Indices< false >	Specialization for the case of brine being a fluid system with NaCl as individual component
CBrineCO2Indices< true >	Specialization for the case of brine being a pseudo component with a constant salinity
CBase	Fluid system base class
CBrine	A compositional single phase fluid system consisting of two components, which are H2O and NaCl
CBrineAir	A compositional two-phase fluid system with a liquid and a gaseous phase and \(H_2O\), \(Air\) and \(S\) (dissolved minerals) as components
CBrineAirDefaultPolicy	Policy for the brine-air fluid system
CBrineCO2	A compositional fluid with brine (H2O & NaCl) and carbon dioxide as components in both the liquid and the gas (supercritical) phase
CBrineCO2DefaultPolicy	Default policy for the Brine-CO2 fluid system
CCombustionFluidsystem	A two-phase fluid system with water as sole component
CH2N2CO2FluidSystem	A simple fluid system with one Maxwell-Stefan component
CH2OAir	A compositional two-phase fluid system with water and air as components in both, the liquid and the gas phase
CH2OAirDefaultPolicy	Policy for the H2O-air fluid system
CH2OAirMesitylene	A three-phase fluid system featuring gas, NAPL and water as phases and distilled water \((\mathrm{H_2O})\) and air (Pseudo component composed of \(\mathrm{79\%\;N_2}\), \(\mathrm{20\%\;O_2}\) and Mesitylene \((\mathrm{C_6H_3(CH_3)_3})\) as components
CH2OAirXylene	A three-phase fluid system featuring gas, NAPL and water as phases and distilled water \((\mathrm{H_2O})\) and air (Pseudo component composed of \(\mathrm{79\%\;N_2}\), \(\mathrm{20\%\;O_2}\) and Mesitylene \((\mathrm{C_8H_{10}})\) as components
CH2OHeavyOil	A compositional fluid system with water and heavy oil components in both the liquid and the gas phase
CH2ON2	A two-phase fluid system with two components water \((\mathrm{H_2O})\) Nitrogen \((\mathrm{N_2})\) for non-equilibrium models
CH2ON2DefaultPolicy	Policy for the H2O-N2 fluid system
CH2ON2Kinetic	A two-phase fluid system with two components water \((\mathrm{H_2O})\) Nitrogen \((\mathrm{N_2})\) for non-equilibrium models. TODO: Is this fluid system necessary??
CH2ON2O2	A two-phase (water and air) fluid system with water, nitrogen and oxygen as components
CH2ON2O2DefaultPolicy	Policy for the H2O-N2-O2 fluid system
CLiquidPhaseTwoC	A liquid phase consisting of a two components, a main component and a conservative tracer component
COnePAdapter	An adapter for multi-phase fluid systems to be used with (compositional) one-phase models
COnePGas	A gaseous phase consisting of a single component
COnePLiquid	A liquid phase consisting of a single component
CSpe5	The fluid system for the SPE-5 benchmark problem
CThreePImmiscible	A fluid system for three-phase models assuming immiscibility and thermodynamic equilibrium
CTwoPImmiscible	A fluid system for two-phase models assuming immiscibility and thermodynamic equilibrium
CTwoPOneC	A two-phase fluid system with only one component
►NFluxVariablesCaching
CEmptyAdvectionCache	Empty caches to use in a constitutive flux law/process, e.g. Darcy's law
CEmptyCache	An empty flux variables cache
CEmptyCacheFiller	The empty filler class corresponding to EmptyCache
CEmptyDiffusionCache
CEmptyHeatConductionCache
►NGlue
CIntersection	An intersection object representing the intersection between two grid entites of different grids
►NIAPWS
CCommon	Implements relations which are common for all regions of the IAPWS '97 formulation
CRegion1	Implements the equations for region 1 of the IAPWS '97 formulation
CRegion2	Implements the equations for region 2 of the IAPWS '97 formulation
CRegion4	Implements the equations for region 4 of the IAPWS '97 formulation
►NInterpolationPolicy	Forward declaration of the linear interpolation policy (default)
CLinear	Interpolate linearly between two given values
CLinearTable	Interpolate linearly in a piecewise linear function (tabularized function)
►NIntersectionPolicy
CDefaultPolicyChooser	Default policy chooser class
CPointPolicy	Policy structure for point-like intersections
CPolygonPolicy	Policy structure for polygon-like intersections
CSegmentPolicy	Policy structure for segment-like intersections
►NProperties
►NDetail	Implementation details for template meta programming
CGetDefined	Helper struct to get the first property that is defined in the TypeTag hierarchy
CGetDefined< TypeTag, Property, std::tuple< FirstTypeTag, Args... > >
CGetDefined< TypeTag, Property, std::tuple< LastTypeTag > >
CGetNextTypeTag	Helper struct to iteratre over the TypeTag hierarchy
CGetNextTypeTag< TypeTag, Property, std::tuple< FirstTypeTag, Args... >, std::enable_if_t< hasParentTypeTag< FirstTypeTag >(int{}), void > >
CGetNextTypeTag< TypeTag, Property, std::tuple< FirstTypeTag, Args... >, std::enable_if_t<!hasParentTypeTag< FirstTypeTag >(int{}), void > >
CGetNextTypeTag< TypeTag, Property, std::tuple< LastTypeTag >, std::enable_if_t< hasParentTypeTag< LastTypeTag >(int{}), void > >
CGetNextTypeTag< TypeTag, Property, std::tuple< LastTypeTag >, std::enable_if_t<!hasParentTypeTag< LastTypeTag >(int{}), void > >
CGetPropImpl	Helper struct to extract get the Property specilization given a TypeTag, asserts that the property is defined
CGetTypeTagInheritance
CGetTypeTagInheritance< std::tuple< FirstTypeTag, OtherTypeTags... > >
CGetTypeTagInheritance< std::tuple< OneTypeTag > >
►NTTag	Type tag for numeric models
CAngeliTest
CBase
CBloodFlow
CBloodFlowBox
CBloodFlowCC
CBoxDfmModel
CBoxDisc
CBoxFacetCouplingModel
CBoxModel
CCCMpfaFacetCouplingModel
CCCMpfaModel
CCCTpfaDisc
CCCTpfaFacetCouplingModel
CCCTpfaModel
CChannelNCTest
CChannelTest
CClosedSystemTest
CColumn
CColumnBox
CColumnCCTpfa
CCombustionOneComponent
CCombustionOneComponentBox
CDamBreakWet
CDarcyOneP
CDarcyOnePThreeC
CDarcyOnePTwoC
CDarcyTwoP
CDarcyTwoPTwoC
CDensityDrivenFlow
CDissolution
CDissolutionBox
CDissolutionCCTpfa
CDoneaTest
CElastic
CEvaporationAtmosphere
CEvaporationAtmosphereBox
CFiniteVolumeModel
CFlatPlateNCKEpsilon
CFlatPlateNCKOmega
CFlatPlateNCLowReKEpsilon
CFlatPlateNCNIKEpsilon
CFlatPlateNCNIKOmega
CFlatPlateNCNILowReKEpsilon
CFlatPlateNCNIOneEq
CFlatPlateNCNIZeroEq
CFlatPlateNCOneEq
CFlatPlateNCZeroEq
CFracture
CFractureBox
CFractureCCMpfa
CFractureCCTpfa
CFreeFlow
CFuelCell
CFuelCellBox
CFuelCellCCTpfa
CGeomechanics
CGrid
CGridProperties	Type tag for numeric models
CHeterogeneous
CHeterogeneousBox
CHeterogeneousCCTpfa
CIncompressibleTest
CInfiltrationThreeP
CInfiltrationThreePBox
CInfiltrationThreePCCTpfa
CInfiltrationThreePThreeC
CInfiltrationThreePThreeCBox
CInfiltrationThreePThreeCCCTpfa
CInjection
CInjection2PNITypeTag
CInjectionBox
CInjectionBox2PNITypeTag
CInjectionCC2PNITypeTag
CInjectionCCMpfa
CInjectionCCTpfa
CInjectionProblem
CKEpsilon	The type tag for the single-phase, isothermal k-epsilon model
CKEpsilonNameTestTypeTag
CKEpsilonNC	The type tags for the single-phase, multi-component isothermal k-epsilon model
CKEpsilonNCNameTestTypeTag
CKEpsilonNCNI	The type tags for the single-phase, multi-component non-isothermal k-epsilon models
CKEpsilonNCNINameTestTypeTag
CKEpsilonNI	The type tag for the single-phase, non-isothermal k-epsilon model
CKEpsilonNINameTestTypeTag
CKOmega	The type tag for the single-phase, isothermal k-omega model
CKOmegaNameTestTypeTag
CKOmegaNC	The type tags for the single-phase, multi-component isothermal k-omega model
CKOmegaNCNameTestTypeTag
CKOmegaNCNI	The type tags for the single-phase, multi-component non-isothermal k-omega models
CKOmegaNCNINameTestTypeTag
CKOmegaNI	The type tag for the single-phase, non-isothermal k-omega 2-Eq. model
CKOmegaNINameTestTypeTag
CKovasznayTest
CKuevette
CKuevetteBox
CKuevetteCCTpfa
CLowReKEpsilon	The type tag for the single-phase, isothermal low-Reynolds k-epsilon model
CLowReKEpsilonNameTestTypeTag
CLowReKEpsilonNC	The type tags for the single-phase, multi-component isothermal low-Re k-epsilon model
CLowReKEpsilonNCNameTestTypeTag
CLowReKEpsilonNCNI	The type tags for the single-phase, multi-component non-isothermal low-Re k-epsilon models
CLowReKEpsilonNCNINameTestTypeTag
CLowReKEpsilonNI	The type tag for the single-phase, non-isothermal low-Reynolds k-epsilon model
CLowReKEpsilonNINameTestTypeTag
CMatrix
CMaxwellStefanNCTest
CMaxwellStefanOnePThreeCTest
CMaxwellStefanOnePThreeCTestBox
CMaxwellStefanOnePThreeCTestCCTpfa
CMaxwellStefanTest
CMaxwellStefanTestBox
CMaxwellStefanTestCC
CModelProperties
CMPNC
CMPNCComparison
CMPNCComparisonBox
CMPNCComparisonCC
CMPNCNI
CMPNCNonequil
CNavierStokes	The type tag for the single-phase, isothermal Navier-Stokes model
CNavierStokesAnalytic
CNavierStokesNC	The type tag for the single-phase, multi-component isothermal free-flow model
CNavierStokesNCNI	The type tag for the single-phase, multi-component non-isothermal free-flow model
CNavierStokesNCNIPVNameTypeTag
CNavierStokesNCPVNameTypeTag
CNavierStokesNI	The type tag for the corresponding non-isothermal model
CNavierStokesNIPVNameTypeTag
CNavierStokesPVNameTypeTag
CNonEquilibrium
CObstacle
CObstacleBox
CObstacleCC
COneEq	The type tag for the single-phase, isothermal Spalart-Allmaras model
COneEqNameTestTypeTag
COneEqNC	The type tags for the single-phase, multi-component isothermal one-equation model
COneEqNCNameTestTypeTag
COneEqNCNI	The type tags for the single-phase, multi-component non-isothermal one-equation models
COneEqNCNINameTestTypeTag
COneEqNI	The type tag for the single-phase, non-isothermal Spalart-Allmaras model
COneEqNINameTestTypeTag
COneP	The type tags for the isothermal single phase model
COnePBulk
COnePBulkBox
COnePBulkMpfa
COnePBulkTpfa
COnePCompressible
COnePCompressibleBox
COnePCompressibleMpfa
COnePCompressibleTpfa
COnePEdge
COnePEdgeBox
COnePEdgeMpfa
COnePEdgeTpfa
COnePFacet
COnePFacetBox
COnePFacetMpfa
COnePFacetTpfa
COnePIncompressible
COnePIncompressibleBox
COnePIncompressibleMpfa
COnePIncompressibleTpfa
COnePInternalDirichlet
COnePInternalDirichletBox
COnePLowDim
COnePLowDimBox
COnePLowDimMpfa
COnePLowDimTpfa
COnePModel
COnePNC
COnePNCMin
COnePNCMinNI
COnePNCNI
COnePNCNonEquil
COnePNI	The type tags for the non-isothermal single phase model
COnePNIConduction
COnePNIConductionBox
COnePNIConductionCCMpfa
COnePNIConductionCCTpfa
COnePNIConvection
COnePNIConvectionBox
COnePNIConvectionCCMpfa
COnePNIConvectionCCTpfa
COnePSingularity
COnePSingularityBox
COnePSingularityCCTpfa
COnePSingularityTimeDependentCCTpfa
COnePSub
COnePSub0
COnePSub1
COnePTest
COnePTestBox
COnePTestCCMpfa
COnePTestCCTpfa
COnePTwoCNIConduction
COnePTwoCNIConductionBox
COnePTwoCNIConductionCCMpfa
COnePTwoCNIConductionCCTpfa
COnePTwoCNIConvection
COnePTwoCNIConvectionBox
COnePTwoCNIConvectionCCMpfa
COnePTwoCNIConvectionCCTpfa
COnePTwoCNITransientBC
COnePTwoCNITransientBCBox
COnePTwoCNITransientBCCCMpfa
COnePTwoCNITransientBCCCTpfa
COnePTwoCTest
COnePTwoCTestBox
COnePTwoCTestCCMpfa
COnePTwoCTestCCTpfa
COnePTwoCThermalNonequilibrium
COnePTwoCThermalNonequilibriumBox
COnePTwoCThermalNonequilibriumCCTpfa
CPipeLauferKEpsilon
CPipeLauferKOmega
CPipeLauferLowReKEpsilon
CPipeLauferNIKEpsilon
CPipeLauferNIKOmega
CPipeLauferNILowReKEpsilon
CPipeLauferNIOneEq
CPipeLauferNIZeroEq
CPipeLauferOneEq
CPipeLauferZeroEq
CPoroElastic
CPoroElasticSub
CPorousMediumFlow
CRANS	The type tag for the single-phase, isothermal Reynolds-Averaged Navier-Stokes model
CRANSModel
CRANSNCModel
CRANSNI	The type tag for the single-phase, isothermal Reynolds-Averaged Navier-Stokes model
CRichards
CRichardsAnalytical
CRichardsAnalyticalBox
CRichardsAnalyticalCC
CRichardsLens
CRichardsLensBox
CRichardsLensCC
CRichardsNC
CRichardsNCNI
CRichardsNI
CRichardsNIConduction
CRichardsNIConductionBox
CRichardsNIConductionCC
CRichardsNIConvection
CRichardsNIConvectionBox
CRichardsNIConvectionCC
CRichardsNIEvaporation
CRichardsNIEvaporationBox
CRichardsNIEvaporationCC
CRichardsWellTracer
CRichardsWellTracerBox
CRichardsWellTracerCC
CRoot
CRoughChannel
CSagd
CSalinization
CSalinizationBox
CSalinizationCCTpfa
CSaltWaterIntrusionTest
CShallowWater
CSincosTest
CSoil
CSoilBox
CSoilCC
CSolidEnergy
CSolidEnergyTest
CStaggeredFreeFlowModel
CStaggeredModel
CStaggeredPVNamesTestTypeTag
CStokesOneP
CStokesOnePThreeC
CStokesOnePTwoC
CTestElastic
CTestPoroElastic
CThermoChem
CThermoChemBox
CThreeDChannelTest
CThreeP	The type tags for the isothermal three-phase model
CThreePNI	The type tags for the non-isothermal three-phase model
CThreePNIConduction
CThreePNIConductionBox
CThreePNIConductionCCMpfa
CThreePNIConductionCCTpfa
CThreePNIConvection
CThreePNIConvectionBox
CThreePNIConvectionCCMpfa
CThreePNIConvectionCCTpfa
CThreePThreeC	The type tags for the isothermal three-phase three-component model
CThreePThreeCNI	The type tags for the non-isothermal three-phase three-component model
CThreePWaterOilNI
CThreePWaterOilSagdBox
CTissue
CTissueBox
CTissueCC
CTracer
CTracerBulkBox
CTracerBulkMpfa
CTracerBulkTpfa
CTracerLowDimBox
CTracerLowDimMpfa
CTracerLowDimTpfa
CTracerTest
CTracerTestBox
CTracerTestBulk
CTracerTestCC
CTracerTestLowDim
CTracerTestMpfa
CTracerTestTpfa
CTubesTest
CTubesTestBox
CTubesTestCCTpfa
CTwoP	The type tag for the isothermal two-phase model
CTwoPAdaptivePointSource
CTwoPIncompressible
CTwoPIncompressibleAdaptiveBox
CTwoPIncompressibleAdaptiveMpfa
CTwoPIncompressibleAdaptiveTpfa
CTwoPIncompressibleBox
CTwoPIncompressibleBoxDfm
CTwoPIncompressibleMpfa
CTwoPIncompressibleTpfa
CTwoPNC
CTwoPNCDiffusion
CTwoPNCDiffusionCC
CTwoPNCMin
CTwoPNCMinNI
CTwoPNCNI
CTwoPNI	The type tag for the non-isothermal two-phase model
CTwoPOneCNI
CTwoPOneCNIBox
CTwoPOneCNICCTpfa
CTwoPSub
CTwoPTracerTest
CTwoPTracerTestTpfa
CTwoPTwoC
CTwoPTwoCChemicalNonequilibrium
CTwoPTwoCChemicalNonequilibriumBox
CTwoPTwoCChemicalNonequilibriumCC
CTwoPTwoCCO2
CTwoPTwoCCO2NI
CTwoPTwoCComparison
CTwoPTwoCComparisonBox
CTwoPTwoCComparisonCC
CTwoPTwoCNI
CTwoPTwoCNINonEquil
CTwoPTwoCNonEquil
CWaterAir
CWaterAirBox
CWaterAirCCTpfa
CZeroEq	The type tag for the single-phase, isothermal Reynolds-Averaged Navier-Stokes 0-Eq. model
CZeroEqNameTestTypeTag
CZeroEqNC	The type tags for the single-phase, multi-component isothermal ZeroEq model
CZeroEqNCNameTestTypeTag
CZeroEqNCNI	The type tags for the single-phase, multi-component non-isothermal ZeroEq models
CZeroEqNCNINameTestTypeTag
CZeroEqNI	The type tag for the single-phase, non-isothermal Reynolds-Averaged Navier-Stokes model
CZeroEqNINameTestTypeTag
CAdvectionType	The type for the calculation the advective fluxes
CAdvectionType< TypeTag, TTag::BoxFacetCouplingModel >	Use the box facet coupling-specific Darcy's law
CAdvectionType< TypeTag, TTag::CCTpfaFacetCouplingModel >	Use the tpfa facet coupling-specific Darcy's law
CAdvectionType< TypeTag, TTag::PorousMediumFlow >	By default, we use darcy's law for the advective fluxes
CAdvectionType< TypeTag, TTag::ShallowWater >
CAdvectionType< TypeTag, TTag::Tracer >	We use darcy's law as the default for the advective fluxes
CAdvectionType< TypeTag, TTag::TracerBulkBox >
CAdvectionType< TypeTag, TTag::TracerBulkTpfa >	Overwrite the advection type property
CAdvectionType< TypeTag, TTag::TwoPOneCNI >	Use a modified version of Darcy's law which allows for blocking of spurious flows
CBalanceEqOpts	A class that collects options for the evaluation of the balance equations
CBalanceEqOpts< TypeTag, TTag::ModelProperties >	Set the default class for the balance equation options
CBaseEpsilon	A base epsilon for numerical differentiation, can contain multiple values
CBaseLocalResidual	The type of the base class of the local residual (specific to a discretization scheme)
CBaseLocalResidual< TypeTag, TTag::BoxFacetCouplingModel >	Use the box local residual for models with facet coupling
CBaseLocalResidual< TypeTag, TTag::BoxModel >	Set the BaseLocalResidual to BoxLocalResidual
CBaseLocalResidual< TypeTag, TTag::CCMpfaFacetCouplingModel >	Use the cc local residual for models with facet coupling
CBaseLocalResidual< TypeTag, TTag::CCMpfaModel >	Set the BaseLocalResidual to CCLocalResidual
CBaseLocalResidual< TypeTag, TTag::CCTpfaFacetCouplingModel >	Use the cc local residual for models with facet coupling
CBaseLocalResidual< TypeTag, TTag::CCTpfaModel >	Set the BaseLocalResidual to CCLocalResidual
CBaseLocalResidual< TypeTag, TTag::StaggeredModel >	Set the BaseLocalResidual to StaggeredLocalResidual
CBaseModelTraits	Model traits to be used as a base for nonisothermal, mineralization ... models
CBaseModelTraits< TypeTag, TTag::OneP >	States some specifics of the one-phase model
CBaseModelTraits< TypeTag, TTag::OnePNC >	The base model traits. Per default, we use the number of components of the fluid system
CBaseModelTraits< TypeTag, TTag::RichardsNC >	Set the model traits class
CBaseModelTraits< TypeTag, TTag::ThreePThreeC >	Set the model traits
CBaseModelTraits< TypeTag, TTag::TwoP >	The base model traits class
CBaseModelTraits< TypeTag, TTag::TwoPNC >	Set the base model traits
CBaseModelTraits< TypeTag, TTag::TwoPTwoC >	Set the model traits property
CBoundaryMobility< TypeTag, TTag::SequentialTwoPTwoC >	< Saturation scales flux on Dirichlet B.C
CBoundaryTypes	Stores the boundary types of a single degree of freedom
CBoundaryTypes< TypeTag, TTag::FiniteVolumeModel >	Boundary types at a single degree of freedom
CBoundaryTypes< TypeTag, TTag::SequentialModel >	Boundary types at a single degree of freedom
CBoundaryTypes< TypeTag, TTag::StaggeredFreeFlowModel >	Boundary types at a single degree of freedom
CBoundaryTypes< TypeTag, TTag::StaggeredModel >	Boundary types at a single degree of freedom
CBoundaryValues	Class containing local boundary data
CCellCenterPrimaryVariables	The primary variables container type for cell-centered dofs
CCellCenterPrimaryVariables< TypeTag, TTag::StaggeredModel >	The cell center primary variables
CCellCenterSolutionVector	The solution vector type for cell-centered dofs
CCellCenterSolutionVector< TypeTag, TTag::StaggeredModel >	The type of a solution for the whole grid at a fixed time TODO: move to LinearAlgebra traits
CChemistry	The chemistry class with which solves equlibrium reactions
CCoordinateType
CCoordinateType< TypeTag, TTag::Grid >
CCouplingFluidSystem
CCouplingManager
CCouplingManager< TypeTag, TTag::BULKTYPETAG >
CCouplingManager< TypeTag, TTag::DarcyOneP >
CCouplingManager< TypeTag, TTag::DarcyOnePThreeC >
CCouplingManager< TypeTag, TTag::DarcyOnePTwoC >
CCouplingManager< TypeTag, TTag::DarcyTwoP >
CCouplingManager< TypeTag, TTag::DarcyTwoPTwoC >
CCouplingManager< TypeTag, TTag::Fracture >
CCouplingManager< TypeTag, TTag::LOWDIMTYPETAG >
CCouplingManager< TypeTag, TTag::Matrix >
CCouplingManager< TypeTag, TTag::OnePBulkBox >
CCouplingManager< TypeTag, TTag::OnePBulkMpfa >
CCouplingManager< TypeTag, TTag::OnePBulkTpfa >
CCouplingManager< TypeTag, TTag::OnePEdgeBox >
CCouplingManager< TypeTag, TTag::OnePEdgeMpfa >
CCouplingManager< TypeTag, TTag::OnePEdgeTpfa >
CCouplingManager< TypeTag, TTag::OnePFacetBox >
CCouplingManager< TypeTag, TTag::OnePFacetMpfa >
CCouplingManager< TypeTag, TTag::OnePFacetTpfa >
CCouplingManager< TypeTag, TTag::OnePLowDimBox >
CCouplingManager< TypeTag, TTag::OnePLowDimMpfa >
CCouplingManager< TypeTag, TTag::OnePLowDimTpfa >
CCouplingManager< TypeTag, TTag::OnePSub >
CCouplingManager< TypeTag, TTag::PoroElasticSub >
CCouplingManager< TypeTag, TTag::Root >
CCouplingManager< TypeTag, TTag::Soil >
CCouplingManager< TypeTag, TTag::SOILTYPETAG >
CCouplingManager< TypeTag, TTag::StokesOneP >
CCouplingManager< TypeTag, TTag::StokesOnePThreeC >
CCouplingManager< TypeTag, TTag::StokesOnePTwoC >
CCouplingManager< TypeTag, TTag::TracerBulkBox >
CCouplingManager< TypeTag, TTag::TracerBulkMpfa >
CCouplingManager< TypeTag, TTag::TracerBulkTpfa >
CCouplingManager< TypeTag, TTag::TracerLowDimBox >
CCouplingManager< TypeTag, TTag::TracerLowDimMpfa >
CCouplingManager< TypeTag, TTag::TracerLowDimTpfa >
CCouplingManager< TypeTag, TTag::TwoPSub >
CDualGridNodalIndexSet	The type used for the nodal index sets of the dual grid
CDualGridNodalIndexSet< TypeTag, TTag::CCMpfaModel >	Set the index set type used on the dual grid nodes
CEffectiveDiffusivityModel	The employed model for the computation of the effective diffusivity
CEffectiveDiffusivityModel< TypeTag, TTag::DarcyOnePThreeC >	Use a model with constant tortuosity for the effective diffusivity
CEffectiveDiffusivityModel< TypeTag, TTag::DarcyOnePTwoC >	Use a model with constant tortuosity for the effective diffusivity
CEffectiveDiffusivityModel< TypeTag, TTag::MPNC >	Use the model after Millington (1961) for the effective diffusivity
CEffectiveDiffusivityModel< TypeTag, TTag::OnePNC >	Use the model after Millington (1961) for the effective diffusivity
CEffectiveDiffusivityModel< TypeTag, TTag::Richards >	Use the model after Millington (1961) for the effective diffusivity
CEffectiveDiffusivityModel< TypeTag, TTag::RichardsNC >	The model after Millington (1961) is used for the effective diffusivity
CEffectiveDiffusivityModel< TypeTag, TTag::ThreePThreeC >	The model after Millington (1961) is used for the effective diffusivity
CEffectiveDiffusivityModel< TypeTag, TTag::ThreePWaterOilNI >	Use the model after Millington (1961) for the effective diffusivity
CEffectiveDiffusivityModel< TypeTag, TTag::Tracer >	Use simple model with constant tortuosity as pm diffusivity model
CEffectiveDiffusivityModel< TypeTag, TTag::TwoPNC >	Use the model after Millington (1961) for the effective diffusivity
CElementBoundaryTypes	Stores the boundary types on an element
CElementBoundaryTypes< TypeTag, TTag::BoxFacetCouplingModel >	Per default, use the porous medium flow flux variables with the modified upwind scheme
CElementBoundaryTypes< TypeTag, TTag::BoxModel >	Set the default for the ElementBoundaryTypes
CElementBoundaryTypes< TypeTag, TTag::CCMpfaModel >	Set the default for the ElementBoundaryTypes
CElementBoundaryTypes< TypeTag, TTag::CCTpfaModel >	Set the default for the ElementBoundaryTypes
CElementBoundaryTypes< TypeTag, TTag::StaggeredModel >	Use the cell center element boundary types per default
CEnableBoxInterfaceSolver
CEnableBoxInterfaceSolver< TypeTag, TTag::PorousMediumFlow >	Per default, we disable the box interface solver
CEnableBoxInterfaceSolver< TypeTag, TTag::TwoPIncompressible >
CEnableBoxInterfaceSolver< TypeTag, TTag::TwoPIncompressibleBoxDfm >
CEnableChemicalNonEquilibrium
CEnableChemicalNonEquilibrium< TypeTag, TTag::CombustionOneComponent >
CEnableChemicalNonEquilibrium< TypeTag, TTag::NonEquilibrium >
CEnableChemicalNonEquilibrium< TypeTag, TTag::OnePNCNonEquil >
CEnableFVGridGeometryCache	If geometric data is saved (faster, but more memory consuming)
CEnableFVGridGeometryCache< TypeTag, TTag::FiniteVolumeModel >	We do not store the FVGeometry by default
CEnableGridFaceVariablesCache	Switch on/off caching of face variables
CEnableGridFaceVariablesCache< TypeTag, TTag::ChannelNCTest >
CEnableGridFaceVariablesCache< TypeTag, TTag::DoneaTest >
CEnableGridFaceVariablesCache< TypeTag, TTag::StaggeredModel >	Cache the face variables per default
CEnableGridFluxVariablesCache	If data on flux vars should be saved (faster, but more memory consuming)
CEnableGridFluxVariablesCache< TypeTag, TTag::AngeliTest >
CEnableGridFluxVariablesCache< TypeTag, TTag::BloodFlow >
CEnableGridFluxVariablesCache< TypeTag, TTag::ChannelNCTest >
CEnableGridFluxVariablesCache< TypeTag, TTag::ChannelTest >
CEnableGridFluxVariablesCache< TypeTag, TTag::ClosedSystemTest >
CEnableGridFluxVariablesCache< TypeTag, TTag::DamBreakWet >
CEnableGridFluxVariablesCache< TypeTag, TTag::DensityDrivenFlow >
CEnableGridFluxVariablesCache< TypeTag, TTag::DoneaTest >
CEnableGridFluxVariablesCache< TypeTag, TTag::FiniteVolumeModel >	Disable flux variables data caching by default
CEnableGridFluxVariablesCache< TypeTag, TTag::Fracture >
CEnableGridFluxVariablesCache< TypeTag, TTag::IncompressibleTest >
CEnableGridFluxVariablesCache< TypeTag, TTag::Injection >
CEnableGridFluxVariablesCache< TypeTag, TTag::KovasznayTest >
CEnableGridFluxVariablesCache< TypeTag, TTag::Matrix >
CEnableGridFluxVariablesCache< TypeTag, TTag::MaxwellStefanNCTest >
CEnableGridFluxVariablesCache< TypeTag, TTag::NavierStokesAnalytic >
CEnableGridFluxVariablesCache< TypeTag, TTag::OnePCompressible >
CEnableGridFluxVariablesCache< TypeTag, TTag::OnePIncompressible >
CEnableGridFluxVariablesCache< TypeTag, TTag::OnePTwoCNITransientBC >
CEnableGridFluxVariablesCache< TypeTag, TTag::RANSModel >
CEnableGridFluxVariablesCache< TypeTag, TTag::RANSNCModel >
CEnableGridFluxVariablesCache< TypeTag, TTag::Root >
CEnableGridFluxVariablesCache< TypeTag, TTag::SincosTest >
CEnableGridFluxVariablesCache< TypeTag, TTag::Soil >
CEnableGridFluxVariablesCache< TypeTag, TTag::StokesOneP >
CEnableGridFluxVariablesCache< TypeTag, TTag::StokesOnePThreeC >
CEnableGridFluxVariablesCache< TypeTag, TTag::StokesOnePTwoC >
CEnableGridFluxVariablesCache< TypeTag, TTag::ThreeDChannelTest >
CEnableGridFluxVariablesCache< TypeTag, TTag::Tissue >
CEnableGridFluxVariablesCache< TypeTag, TTag::TracerTest >
CEnableGridFluxVariablesCache< TypeTag, TTag::TwoPIncompressible >
CEnableGridFluxVariablesCache< TypeTag, TTag::TwoPIncompressibleBoxDfm >
CEnableGridGeometryCache
CEnableGridGeometryCache< TypeTag, TTag::AngeliTest >
CEnableGridGeometryCache< TypeTag, TTag::BloodFlow >
CEnableGridGeometryCache< TypeTag, TTag::ChannelNCTest >
CEnableGridGeometryCache< TypeTag, TTag::ChannelTest >
CEnableGridGeometryCache< TypeTag, TTag::ClosedSystemTest >
CEnableGridGeometryCache< TypeTag, TTag::DamBreakWet >
CEnableGridGeometryCache< TypeTag, TTag::DensityDrivenFlow >
CEnableGridGeometryCache< TypeTag, TTag::DoneaTest >
CEnableGridGeometryCache< TypeTag, TTag::Fracture >	Enable caching (more memory, but faster runtime)
CEnableGridGeometryCache< TypeTag, TTag::IncompressibleTest >
CEnableGridGeometryCache< TypeTag, TTag::Injection >
CEnableGridGeometryCache< TypeTag, TTag::KovasznayTest >
CEnableGridGeometryCache< TypeTag, TTag::Matrix >
CEnableGridGeometryCache< TypeTag, TTag::MaxwellStefanNCTest >
CEnableGridGeometryCache< TypeTag, TTag::NavierStokesAnalytic >
CEnableGridGeometryCache< TypeTag, TTag::OnePCompressible >
CEnableGridGeometryCache< TypeTag, TTag::OnePIncompressible >
CEnableGridGeometryCache< TypeTag, TTag::OnePTwoCNITransientBC >
CEnableGridGeometryCache< TypeTag, TTag::RANSModel >
CEnableGridGeometryCache< TypeTag, TTag::RANSNCModel >
CEnableGridGeometryCache< TypeTag, TTag::Root >
CEnableGridGeometryCache< TypeTag, TTag::RoughChannel >
CEnableGridGeometryCache< TypeTag, TTag::SincosTest >
CEnableGridGeometryCache< TypeTag, TTag::Soil >
CEnableGridGeometryCache< TypeTag, TTag::StokesOneP >
CEnableGridGeometryCache< TypeTag, TTag::StokesOnePThreeC >
CEnableGridGeometryCache< TypeTag, TTag::StokesOnePTwoC >
CEnableGridGeometryCache< TypeTag, TTag::ThreeDChannelTest >
CEnableGridGeometryCache< TypeTag, TTag::Tissue >
CEnableGridGeometryCache< TypeTag, TTag::TracerTest >
CEnableGridGeometryCache< TypeTag, TTag::TwoPIncompressible >
CEnableGridGeometryCache< TypeTag, TTag::TwoPIncompressibleBoxDfm >
CEnableGridGeometryCacheHelper
CEnableGridGeometryCacheHelper< TypeTag, false >
CEnableGridVolumeVariablesCache	If disabled, the volume variables are not stored (reduces memory, but is slower)
CEnableGridVolumeVariablesCache< TypeTag, TTag::AngeliTest >
CEnableGridVolumeVariablesCache< TypeTag, TTag::BloodFlow >
CEnableGridVolumeVariablesCache< TypeTag, TTag::ChannelNCTest >
CEnableGridVolumeVariablesCache< TypeTag, TTag::ChannelTest >
CEnableGridVolumeVariablesCache< TypeTag, TTag::ClosedSystemTest >
CEnableGridVolumeVariablesCache< TypeTag, TTag::DamBreakWet >
CEnableGridVolumeVariablesCache< TypeTag, TTag::DensityDrivenFlow >
CEnableGridVolumeVariablesCache< TypeTag, TTag::DoneaTest >
CEnableGridVolumeVariablesCache< TypeTag, TTag::FiniteVolumeModel >	We do not store the volume variables by default
CEnableGridVolumeVariablesCache< TypeTag, TTag::Fracture >
CEnableGridVolumeVariablesCache< TypeTag, TTag::IncompressibleTest >
CEnableGridVolumeVariablesCache< TypeTag, TTag::Injection >
CEnableGridVolumeVariablesCache< TypeTag, TTag::KovasznayTest >
CEnableGridVolumeVariablesCache< TypeTag, TTag::Matrix >
CEnableGridVolumeVariablesCache< TypeTag, TTag::MaxwellStefanNCTest >
CEnableGridVolumeVariablesCache< TypeTag, TTag::NavierStokesAnalytic >
CEnableGridVolumeVariablesCache< TypeTag, TTag::OnePCompressible >
CEnableGridVolumeVariablesCache< TypeTag, TTag::OnePIncompressible >
CEnableGridVolumeVariablesCache< TypeTag, TTag::OnePTwoCNITransientBC >
CEnableGridVolumeVariablesCache< TypeTag, TTag::RANSModel >
CEnableGridVolumeVariablesCache< TypeTag, TTag::RANSNCModel >
CEnableGridVolumeVariablesCache< TypeTag, TTag::Root >
CEnableGridVolumeVariablesCache< TypeTag, TTag::RoughChannel >
CEnableGridVolumeVariablesCache< TypeTag, TTag::SincosTest >
CEnableGridVolumeVariablesCache< TypeTag, TTag::Soil >
CEnableGridVolumeVariablesCache< TypeTag, TTag::StokesOneP >
CEnableGridVolumeVariablesCache< TypeTag, TTag::StokesOnePThreeC >
CEnableGridVolumeVariablesCache< TypeTag, TTag::StokesOnePTwoC >
CEnableGridVolumeVariablesCache< TypeTag, TTag::ThreeDChannelTest >
CEnableGridVolumeVariablesCache< TypeTag, TTag::Tissue >
CEnableGridVolumeVariablesCache< TypeTag, TTag::TracerTest >
CEnableGridVolumeVariablesCache< TypeTag, TTag::TwoPIncompressible >
CEnableGridVolumeVariablesCache< TypeTag, TTag::TwoPIncompressibleBoxDfm >
CEnableThermalNonEquilibrium
CEnableThermalNonEquilibrium< TypeTag, TTag::NonEquilibrium >	Per default, we consider both thermal and chemical non-equilibrium
CEnableThermalNonEquilibrium< TypeTag, TTag::PorousMediumFlow >
CEnableThermalNonEquilibrium< TypeTag, TTag::TwoPTwoCChemicalNonequilibrium >
CEnableWaterDiffusionInAir	Property for turning Richards into extended Richards
CEnableWaterDiffusionInAir< TypeTag, TTag::Richards >
CEnableWaterDiffusionInAir< TypeTag, TTag::RichardsNC >
CEnableWaterDiffusionInAir< TypeTag, TTag::RichardsNIEvaporation >
CEnergyLocalResidual	The local residual of the energy equation
CEnergyLocalResidual< TypeTag, TTag::CombustionOneComponent >
CEnergyLocalResidual< TypeTag, TTag::NonEquilibrium >
CEnergyLocalResidual< TypeTag, TTag::PorousMediumFlow >	The default implementation of the energy balance equation for flow problems in porous media
CEnergyLocalResidual< TypeTag, TTag::TwoPTwoCChemicalNonequilibrium >
CEquilibriumIndices
CEquilibriumIOFields
CEquilibriumIOFields< TypeTag, TTag::MPNCNonequil >	Set the vtk output fields specific to this model
CEquilibriumIOFields< TypeTag, TTag::OnePNCNonEquil >	Set the vtk output fields specific to this model
CEquilibriumIOFields< TypeTag, TTag::TwoPTwoCNINonEquil >	Set the equilibrium IO fields which are in that case the nonisothermal io fields
CEquilibriumIOFields< TypeTag, TTag::TwoPTwoCNonEquil >	Set the vtk output fields specific to this model
CEquilibriumLocalResidual
CEquilibriumLocalResidual< TypeTag, TTag::MPNCNonequil >
CEquilibriumLocalResidual< TypeTag, TTag::OnePNCNonEquil >
CEquilibriumLocalResidual< TypeTag, TTag::TwoPTwoCNonEquil >
CEquilibriumModelTraits	Formulation of the pressure e.g most wetting first
CEquilibriumModelTraits< TypeTag, TTag::CombustionOneComponent >
CEquilibriumModelTraits< TypeTag, TTag::MPNCNonequil >	Set equilibrium model traits
CEquilibriumModelTraits< TypeTag, TTag::OnePNCNonEquil >	Set equilibrium model traits
CEquilibriumModelTraits< TypeTag, TTag::TwoPTwoCNonEquil >	Set equilibrium model traits
CFacePrimaryVariables	The primary variables container type for face dofs
CFacePrimaryVariables< TypeTag, TTag::StaggeredModel >	The face primary variables
CFaceSolutionVector	The solution vector type for face dofs
CFaceSolutionVector< TypeTag, TTag::StaggeredModel >	The type of a solution for the whole grid at a fixed time TODO: move to LinearAlgebra traits
CFaceVariables	Class containing local face-related data
CFaceVariables< TypeTag, TTag::StaggeredFreeFlowModel >	The variables living on the faces
CFluidState	The type of the fluid state to use
CFluidState< TypeTag, TTag::CombustionOneComponent >
CFluidState< TypeTag, TTag::MPNC >	This model uses the compositional fluid state
CFluidState< TypeTag, TTag::NavierStokes >	The fluid state which is used by the volume variables to store the thermodynamic state. This should be chosen appropriately for the model ((non-)isothermal, equilibrium, ...). This can be done in the problem
CFluidState< TypeTag, TTag::NavierStokesNC >	The fluid state which is used by the volume variables to store the thermodynamic state. This should be chosen appropriately for the model ((non-)isothermal, equilibrium, ...). This can be done in the problem
CFluidState< TypeTag, TTag::NonEquilibrium >
CFluidState< TypeTag, TTag::OneP >	The fluid state which is used by the volume variables to store the thermodynamic state
CFluidState< TypeTag, TTag::OnePNC >	The fluid state which is used by the volume variables to store the thermodynamic state
CFluidState< TypeTag, TTag::Richards >	The fluid state which is used by the volume variables to store the thermodynamic state. This should be chosen appropriately for the model ((non-)isothermal, equilibrium, ...). This can be done in the problem
CFluidState< TypeTag, TTag::RichardsNC >	The fluid state which is used by the volume variables to store the thermodynamic state. This should be chosen appropriately for the model ((non-)isothermal, equilibrium, ...). This can be done in the problem
CFluidState< TypeTag, TTag::SequentialTwoP >	Set default fluid state
CFluidState< TypeTag, TTag::ThreeP >	The fluid state which is used by the volume variables to store the thermodynamic state
CFluidState< TypeTag, TTag::ThreePThreeC >	The fluid state which is used by the volume variables to store the thermodynamic state. This should be chosen appropriately for the model ((non-)isothermal, equilibrium, ...). This can be done in the problem
CFluidState< TypeTag, TTag::ThreePWaterOilNI >	The fluid state which is used by the volume variables to store the thermodynamic state. This should be chosen appropriately for the model ((non-)isothermal, equilibrium, ...). This can be done in the problem
CFluidState< TypeTag, TTag::TwoP >	The two-phase model uses the immiscible fluid state
CFluidState< TypeTag, TTag::TwoPNC >	This model uses the compositional fluid state
CFluidState< TypeTag, TTag::TwoPOneCNI >	The fluid state which is used by the volume variables to store the thermodynamic state. This should be chosen appropriately for the model ((non-)isothermal, equilibrium, ...). This can be done in the problem
CFluidSystem	The type of the fluid system to use
CFluidSystem< TypeTag, TTag::Adaptive2p2c2d >
CFluidSystem< TypeTag, TTag::Adaptive2p2c3d >
CFluidSystem< TypeTag, TTag::AngeliTest >
CFluidSystem< TypeTag, TTag::BloodFlow >
CFluidSystem< TypeTag, TTag::ChannelNCTest >
CFluidSystem< TypeTag, TTag::ChannelTest >
CFluidSystem< TypeTag, TTag::ClosedSystemTest >
CFluidSystem< TypeTag, TTag::Column >
CFluidSystem< TypeTag, TTag::CombustionOneComponent >
CFluidSystem< TypeTag, TTag::DarcyOneP >
CFluidSystem< TypeTag, TTag::DarcyOnePThreeC >
CFluidSystem< TypeTag, TTag::DarcyOnePTwoC >
CFluidSystem< TypeTag, TTag::DarcyTwoP >
CFluidSystem< TypeTag, TTag::DarcyTwoPTwoC >
CFluidSystem< TypeTag, TTag::DensityDrivenFlow >
CFluidSystem< TypeTag, TTag::DiffusionTest >
CFluidSystem< TypeTag, TTag::Dissolution >
CFluidSystem< TypeTag, TTag::DoneaTest >
CFluidSystem< TypeTag, TTag::EvaporationAtmosphere >
CFluidSystem< TypeTag, TTag::Fracture >
CFluidSystem< TypeTag, TTag::FuelCell >
CFluidSystem< TypeTag, TTag::FVMPFAOVelocity2PTestTypeTag >
CFluidSystem< TypeTag, TTag::FVVelocity2PTestTypeTag >
CFluidSystem< TypeTag, TTag::Heterogeneous >
CFluidSystem< TypeTag, TTag::IMPESTest >
CFluidSystem< TypeTag, TTag::IncompressibleTest >
CFluidSystem< TypeTag, TTag::InfiltrationThreeP >
CFluidSystem< TypeTag, TTag::InfiltrationThreePThreeC >
CFluidSystem< TypeTag, TTag::Injection >
CFluidSystem< TypeTag, TTag::Injection2PNITypeTag >
CFluidSystem< TypeTag, TTag::InjectionProblem >
CFluidSystem< TypeTag, TTag::KovasznayTest >
CFluidSystem< TypeTag, TTag::Kuevette >
CFluidSystem< TypeTag, TTag::Matrix >
CFluidSystem< TypeTag, TTag::MaxwellStefanNCTest >
CFluidSystem< TypeTag, TTag::MaxwellStefanOnePThreeCTest >
CFluidSystem< TypeTag, TTag::MaxwellStefanTest >
CFluidSystem< TypeTag, TTag::MimeticPressure2PTestTypeTag >
CFluidSystem< TypeTag, TTag::MPFATwoPTest >
CFluidSystem< TypeTag, TTag::MPNCComparison >
CFluidSystem< TypeTag, TTag::NavierStokesAnalytic >
CFluidSystem< TypeTag, TTag::Obstacle >
CFluidSystem< TypeTag, TTag::OnePBulk >
CFluidSystem< TypeTag, TTag::OnePCompressible >
CFluidSystem< TypeTag, TTag::OnePEdge >
CFluidSystem< TypeTag, TTag::OnePFacet >
CFluidSystem< TypeTag, TTag::OnePIncompressible >
CFluidSystem< TypeTag, TTag::OnePLowDim >
CFluidSystem< TypeTag, TTag::OnePNIConduction >
CFluidSystem< TypeTag, TTag::OnePNIConvection >
CFluidSystem< TypeTag, TTag::OnePSingularity >
CFluidSystem< TypeTag, TTag::OnePSub >
CFluidSystem< TypeTag, TTag::OnePSub0 >
CFluidSystem< TypeTag, TTag::OnePSub1 >
CFluidSystem< TypeTag, TTag::OnePTest >
CFluidSystem< TypeTag, TTag::OnePTwoCNIConduction >
CFluidSystem< TypeTag, TTag::OnePTwoCNIConvection >
CFluidSystem< TypeTag, TTag::OnePTwoCNITransientBC >
CFluidSystem< TypeTag, TTag::OnePTwoCTest >
CFluidSystem< TypeTag, TTag::OnePTwoCThermalNonequilibrium >
CFluidSystem< TypeTag, TTag::PoroElasticSub >
CFluidSystem< TypeTag, TTag::RANSModel >
CFluidSystem< TypeTag, TTag::RANSNCModel >
CFluidSystem< TypeTag, TTag::Richards >	The fluid system used by the model
CFluidSystem< TypeTag, TTag::RichardsNC >	The fluid system used by the model
CFluidSystem< TypeTag, TTag::RichardsNIConduction >
CFluidSystem< TypeTag, TTag::RichardsNIConvection >
CFluidSystem< TypeTag, TTag::RichardsNIEvaporation >
CFluidSystem< TypeTag, TTag::Root >
CFluidSystem< TypeTag, TTag::Sagd >
CFluidSystem< TypeTag, TTag::Salinization >
CFluidSystem< TypeTag, TTag::SaltWaterIntrusionTest >
CFluidSystem< TypeTag, TTag::SincosTest >
CFluidSystem< TypeTag, TTag::Soil >
CFluidSystem< TypeTag, TTag::StaggeredPVNamesTestTypeTag >
CFluidSystem< TypeTag, TTag::StokesOneP >
CFluidSystem< TypeTag, TTag::StokesOnePThreeC >
CFluidSystem< TypeTag, TTag::StokesOnePTwoC >
CFluidSystem< TypeTag, TTag::TestDecTwoPTwoC >
CFluidSystem< TypeTag, TTag::TestIMPESAdaptive >
CFluidSystem< TypeTag, TTag::TestMultTwoPTwoC >
CFluidSystem< TypeTag, TTag::TestOneP >
CFluidSystem< TypeTag, TTag::TestPoroElastic >
CFluidSystem< TypeTag, TTag::ThermoChem >
CFluidSystem< TypeTag, TTag::ThreeDChannelTest >
CFluidSystem< TypeTag, TTag::ThreeDTwoPTest >
CFluidSystem< TypeTag, TTag::ThreePNIConduction >
CFluidSystem< TypeTag, TTag::ThreePNIConvection >
CFluidSystem< TypeTag, TTag::Tissue >
CFluidSystem< TypeTag, TTag::TracerTest >
CFluidSystem< TypeTag, TTag::TracerTestBulk >
CFluidSystem< TypeTag, TTag::TracerTestLowDim >
CFluidSystem< TypeTag, TTag::TransportTest >
CFluidSystem< TypeTag, TTag::TubesTest >
CFluidSystem< TypeTag, TTag::TwoPIncompressible >
CFluidSystem< TypeTag, TTag::TwoPIncompressibleBoxDfm >
CFluidSystem< TypeTag, TTag::TwoPNCDiffusion >
CFluidSystem< TypeTag, TTag::TwoPSub >
CFluidSystem< TypeTag, TTag::TwoPTracerTest >
CFluidSystem< TypeTag, TTag::TwoPTwoCChemicalNonequilibrium >
CFluidSystem< TypeTag, TTag::TwoPTwoCComparison >
CFluidSystem< TypeTag, TTag::WaterAir >
CFluxVariables	Container storing the different types of flux variables
CFluxVariables< TypeTag, TTag::BoxFacetCouplingModel >	Per default, use the porous medium flow flux variables with the modified upwind scheme
CFluxVariables< TypeTag, TTag::CCMpfaFacetCouplingModel >	Per default, use the porous medium flow flux variables with the modified upwind scheme
CFluxVariables< TypeTag, TTag::CCTpfaFacetCouplingModel >	Per default, use the porous medium flow flux variables with the modified upwind scheme
CFluxVariables< TypeTag, TTag::KEpsilon >	The flux variables
CFluxVariables< TypeTag, TTag::KEpsilonNC >	The flux variables
CFluxVariables< TypeTag, TTag::KEpsilonNCNI >	The flux variables
CFluxVariables< TypeTag, TTag::KOmega >	The flux variables
CFluxVariables< TypeTag, TTag::KOmegaNC >	The flux variables
CFluxVariables< TypeTag, TTag::KOmegaNCNI >	The flux variables
CFluxVariables< TypeTag, TTag::LowReKEpsilon >	The flux variables
CFluxVariables< TypeTag, TTag::LowReKEpsilonNC >	The flux variables
CFluxVariables< TypeTag, TTag::LowReKEpsilonNCNI >	The flux variables
CFluxVariables< TypeTag, TTag::NavierStokes >	The flux variables
CFluxVariables< TypeTag, TTag::NavierStokesNC >	The flux variables
CFluxVariables< TypeTag, TTag::OneEq >	The flux variables
CFluxVariables< TypeTag, TTag::OneEqNC >	The flux variables
CFluxVariables< TypeTag, TTag::OneEqNCNI >	The flux variables
CFluxVariables< TypeTag, TTag::PorousMediumFlow >	The flux variables for models involving flow in porous media
CFluxVariables< TypeTag, TTag::ShallowWater >
CFluxVariablesCache	Stores data associated with flux vars
CFluxVariablesCache< TypeTag, TTag::BoxDfmModel >	The flux variables cache class specific to box-dfm porous medium flow models
CFluxVariablesCache< TypeTag, TTag::FreeFlow >	The flux variables cache class, by default the one for free flow
CFluxVariablesCache< TypeTag, TTag::Geomechanics >	The flux variables cache class for models involving flow in porous media
CFluxVariablesCache< TypeTag, TTag::PorousMediumFlow >	The flux variables cache class for models involving flow in porous media
CFluxVariablesCache< TypeTag, TTag::ShallowWater >
CFluxVariablesCacheFiller	The engine behind the global flux cache (how to fill caches for the stencil)
CFluxVariablesCacheFiller< TypeTag, TTag::FreeFlow >
CFluxVariablesCacheFiller< TypeTag, TTag::PorousMediumFlow >
CFluxVariablesCacheFiller< TypeTag, TTag::ShallowWater >
CFormulation	The formulation of the model
CFormulation< TypeTag, TTag::DarcyTwoP >	Set the default formulation to pw-Sn: This can be over written in the problem
CFormulation< TypeTag, TTag::DarcyTwoPTwoC >	Set the default formulation to pw-Sn: This can be over written in the problem
CFormulation< TypeTag, TTag::Dissolution >
CFormulation< TypeTag, TTag::FuelCell >
CFormulation< TypeTag, TTag::Salinization >
CFormulation< TypeTag, TTag::TwoP >	< Set the default formulation to pwsn
CFormulation< TypeTag, TTag::TwoPNC >	Default formulation is pw-Sn, overwrite if necessary
CFormulation< TypeTag, TTag::TwoPNCDiffusion >	Set the default formulation to pw-Sn: This can be over written in the problem
CFormulation< TypeTag, TTag::TwoPOneCNI >	Set the default formulation to pw-sn
CFormulation< TypeTag, TTag::TwoPTwoCChemicalNonequilibrium >
CFormulation< TypeTag, TTag::TwoPTwoCComparison >
CFVGridGeometry	The type of the global finite volume geometry
CFVGridGeometry< TypeTag, TTag::BoxDfmModel >	Set the default for the global finite volume geometry
CFVGridGeometry< TypeTag, TTag::BoxFacetCouplingModel >	Set the default for the grid finite volume geometry
CFVGridGeometry< TypeTag, TTag::BoxModel >	Set the default for the global finite volume geometry
CFVGridGeometry< TypeTag, TTag::CCMpfaModel >	Set the default for the global finite volume geometry
CFVGridGeometry< TypeTag, TTag::CCTpfaModel >	Set the default for the global finite volume geometry
►CFVGridGeometry< TypeTag, TTag::SequentialModel >	A simplified grid geometry for compatibility with new style models
CMockFVGridGeometry
CFVGridGeometry< TypeTag, TTag::StaggeredFreeFlowModel >	The default fv grid geometry
CFVGridGeometry< TypeTag, TTag::TubesTestBox >
CFVGridGeometry< TypeTag, TTag::TubesTestCCTpfa >
CGrid	The DUNE grid type
CGrid< TypeTag, TTag::AngeliTest >
CGrid< TypeTag, TTag::BloodFlow >
CGrid< TypeTag, TTag::ChannelNCTest >
CGrid< TypeTag, TTag::ChannelTest >
CGrid< TypeTag, TTag::ClosedSystemTest >
CGrid< TypeTag, TTag::Column >
CGrid< TypeTag, TTag::CombustionOneComponent >
CGrid< TypeTag, TTag::DamBreakWet >
CGrid< TypeTag, TTag::DarcyOneP >
CGrid< TypeTag, TTag::DarcyOnePThreeC >
CGrid< TypeTag, TTag::DarcyOnePTwoC >
CGrid< TypeTag, TTag::DarcyTwoP >
CGrid< TypeTag, TTag::DarcyTwoPTwoC >
CGrid< TypeTag, TTag::DensityDrivenFlow >
CGrid< TypeTag, TTag::Dissolution >
CGrid< TypeTag, TTag::DoneaTest >
CGrid< TypeTag, TTag::EvaporationAtmosphere >
CGrid< TypeTag, TTag::Fracture >
CGrid< TypeTag, TTag::FuelCell >
CGrid< TypeTag, TTag::Heterogeneous >
CGrid< TypeTag, TTag::IncompressibleTest >
CGrid< TypeTag, TTag::InfiltrationThreeP >
CGrid< TypeTag, TTag::InfiltrationThreePThreeC >
CGrid< TypeTag, TTag::Injection >
CGrid< TypeTag, TTag::Injection2PNITypeTag >
CGrid< TypeTag, TTag::InjectionProblem >
CGrid< TypeTag, TTag::KovasznayTest >
CGrid< TypeTag, TTag::Kuevette >
CGrid< TypeTag, TTag::Matrix >
CGrid< TypeTag, TTag::MaxwellStefanNCTest >
CGrid< TypeTag, TTag::MaxwellStefanOnePThreeCTest >
CGrid< TypeTag, TTag::MaxwellStefanTest >
CGrid< TypeTag, TTag::MPNCComparison >
CGrid< TypeTag, TTag::NavierStokesAnalytic >
CGrid< TypeTag, TTag::Obstacle >
CGrid< TypeTag, TTag::OnePBulk >
CGrid< TypeTag, TTag::OnePCompressible >
CGrid< TypeTag, TTag::OnePEdge >
CGrid< TypeTag, TTag::OnePFacet >
CGrid< TypeTag, TTag::OnePIncompressible >
CGrid< TypeTag, TTag::OnePLowDim >
CGrid< TypeTag, TTag::OnePNIConduction >
CGrid< TypeTag, TTag::OnePNIConvection >
CGrid< TypeTag, TTag::OnePSingularity >
CGrid< TypeTag, TTag::OnePSub >
CGrid< TypeTag, TTag::OnePTest >
CGrid< TypeTag, TTag::OnePTwoCNIConduction >
CGrid< TypeTag, TTag::OnePTwoCNIConvection >
CGrid< TypeTag, TTag::OnePTwoCNITransientBC >
CGrid< TypeTag, TTag::OnePTwoCTest >
CGrid< TypeTag, TTag::OnePTwoCThermalNonequilibrium >
CGrid< TypeTag, TTag::PoroElasticSub >
CGrid< TypeTag, TTag::RANSModel >
CGrid< TypeTag, TTag::RANSNCModel >
CGrid< TypeTag, TTag::RichardsAnalytical >
CGrid< TypeTag, TTag::RichardsLens >
CGrid< TypeTag, TTag::RichardsNIConduction >
CGrid< TypeTag, TTag::RichardsNIConvection >
CGrid< TypeTag, TTag::RichardsNIEvaporation >
CGrid< TypeTag, TTag::RichardsWellTracer >
CGrid< TypeTag, TTag::Root >
CGrid< TypeTag, TTag::RoughChannel >
CGrid< TypeTag, TTag::Sagd >
CGrid< TypeTag, TTag::Salinization >
CGrid< TypeTag, TTag::SaltWaterIntrusionTest >
CGrid< TypeTag, TTag::SincosTest >
CGrid< TypeTag, TTag::Soil >
CGrid< TypeTag, TTag::SolidEnergyTest >
CGrid< TypeTag, TTag::StaggeredPVNamesTestTypeTag >
CGrid< TypeTag, TTag::StokesOneP >
CGrid< TypeTag, TTag::StokesOnePThreeC >
CGrid< TypeTag, TTag::StokesOnePTwoC >
CGrid< TypeTag, TTag::TestElastic >
CGrid< TypeTag, TTag::TestPoroElastic >
CGrid< TypeTag, TTag::ThermoChem >
CGrid< TypeTag, TTag::ThreeDChannelTest >
CGrid< TypeTag, TTag::ThreePNIConduction >
CGrid< TypeTag, TTag::ThreePNIConvection >
CGrid< TypeTag, TTag::Tissue >
CGrid< TypeTag, TTag::TracerTest >
CGrid< TypeTag, TTag::TracerTestBulk >
CGrid< TypeTag, TTag::TracerTestLowDim >
CGrid< TypeTag, TTag::TwoPIncompressible >
CGrid< TypeTag, TTag::TwoPIncompressibleBoxDfm >
CGrid< TypeTag, TTag::TwoPNCDiffusion >
CGrid< TypeTag, TTag::TwoPSub >
CGrid< TypeTag, TTag::TwoPTracerTest >
CGrid< TypeTag, TTag::TwoPTwoCChemicalNonequilibrium >
CGrid< TypeTag, TTag::TwoPTwoCComparison >
CGrid< TypeTag, TTag::WaterAir >
CGridFaceVariables	Global vector containing face-related data
CGridFaceVariables< TypeTag, TTag::StaggeredModel >	Set the default global face variables cache vector class
CGridFluxVariablesCache	The global vector of flux variable containers
CGridFluxVariablesCache< TypeTag, TTag::BoxModel >	The grid flux variables cache vector class
CGridFluxVariablesCache< TypeTag, TTag::CCMpfaModel >	The grid volume variables vector class
CGridFluxVariablesCache< TypeTag, TTag::CCTpfaModel >	The grid flux variables cache vector class
CGridFluxVariablesCache< TypeTag, TTag::StaggeredModel >	Set the global flux variables cache vector class
CGridGeometry
CGridGeometryHelper
CGridGeometryHelper< TypeTag, UndefinedProperty >
CGridVariables	The grid variables object managing variable data on the grid (volvars/fluxvars cache)
CGridVariables< TypeTag, TTag::FiniteVolumeModel >	The grid variables
CGridVariables< TypeTag, TTag::NonEquilibrium >	The grid variables
CGridVariables< TypeTag, TTag::StaggeredModel >	Set the grid variables (volume, flux and face variables)
CGridView	The type of the grid view according to the grid type
CGridView< TypeTag, TTag::GridProperties >	Use the leaf grid view if not defined otherwise
CGridView< TypeTag, TTag::SequentialModel >	Use the leaf grid view if not defined otherwise
CGridVolumeVariables	The type for a global container for the volume variables
CGridVolumeVariables< TypeTag, TTag::BoxModel >	The grid volume variables vector class
CGridVolumeVariables< TypeTag, TTag::CCMpfaModel >	The grid volume variables vector class
CGridVolumeVariables< TypeTag, TTag::CCTpfaModel >	The grid volume variables vector class
CGridVolumeVariables< TypeTag, TTag::StaggeredFreeFlowModel >	Set the default global volume variables cache vector class
CH2N2CO2FluidSystem	A simple fluid system with three components for testing the multi-component diffusion with the Maxwell-Stefan formulation
CHeatConductionType	The type for the calculation of the heat conduction fluxes
CHeatConductionType< TypeTag, TTag::FreeFlow >	Use Fourier's Law as default heat conduction type
CHeatConductionType< TypeTag, TTag::NavierStokesNCNI >	Use Fourier's Law as default heat conduction type
CHeatConductionType< TypeTag, TTag::NonEquilibrium >
CHeatConductionType< TypeTag, TTag::PorousMediumFlow >	By default, we use fourier's law as the default for heat conduction fluxes
CHeatConductionType< TypeTag, TTag::RANSNI >	Use Fourier's Law as default heat conduction type
CHeatConductionType< TypeTag, TTag::TwoPTwoCChemicalNonequilibrium >
CIndices< TypeTag, TTag::SequentialTwoP >	Chose the set of indices depending on the chosen formulation
CIntersectionMapper	Specifies the intersection mapper
CIOFields	A class helping models to define input and output fields
CIOFields< TypeTag, TTag::KEpsilon >	The specific I/O fields
CIOFields< TypeTag, TTag::KEpsilonNC >	The specific I/O fields
CIOFields< TypeTag, TTag::KEpsilonNCNI >	The specific I/O fields
CIOFields< TypeTag, TTag::KEpsilonNI >	The specific non-isothermal I/O fields
CIOFields< TypeTag, TTag::KOmega >	The specific I/O fields
CIOFields< TypeTag, TTag::KOmegaNC >	The specific I/O fields
CIOFields< TypeTag, TTag::KOmegaNCNI >	The specific I/O fields
CIOFields< TypeTag, TTag::KOmegaNI >	The specific non-isothermal I/O fields
CIOFields< TypeTag, TTag::LowReKEpsilon >	The specific I/O fields
CIOFields< TypeTag, TTag::LowReKEpsilonNC >	The specific I/O fields
CIOFields< TypeTag, TTag::LowReKEpsilonNCNI >	The specific I/O fields
CIOFields< TypeTag, TTag::LowReKEpsilonNI >	The specific non-isothermal I/O fields
CIOFields< TypeTag, TTag::ModelProperties >	Set the default to an implementation throwing a NotImplemented error
CIOFields< TypeTag, TTag::MPNC >	Set the vtk output fields specific to this model
CIOFields< TypeTag, TTag::MPNCComparison >
CIOFields< TypeTag, TTag::NavierStokes >	The specific I/O fields
CIOFields< TypeTag, TTag::NavierStokesNC >	The specific I/O fields
CIOFields< TypeTag, TTag::NavierStokesNCNI >	The non-isothermal I/O fields
CIOFields< TypeTag, TTag::NavierStokesNI >	The specific non-isothermal I/O fields
CIOFields< TypeTag, TTag::NonEquilibrium >	Indices for non-isothermal models
CIOFields< TypeTag, TTag::OneEq >	The specific I/O fields
CIOFields< TypeTag, TTag::OneEqNC >	The specific I/O fields
CIOFields< TypeTag, TTag::OneEqNCNI >	The specific I/O fields
CIOFields< TypeTag, TTag::OneEqNI >	The specific non-isothermal I/O fields
CIOFields< TypeTag, TTag::OneP >	Default I/O fields specific to this model
CIOFields< TypeTag, TTag::OnePNC >	Set the vtk output fields specific to this model
CIOFields< TypeTag, TTag::OnePNCMin >	Use the mineralization vtk output fields
CIOFields< TypeTag, TTag::OnePNCMinNI >	Non-isothermal vtk output
CIOFields< TypeTag, TTag::OnePNCNI >	The non-isothermal vtk output fields
CIOFields< TypeTag, TTag::OnePNI >	Add temperature to the output
CIOFields< TypeTag, TTag::PoroElastic >	Default vtk output fields specific to this model
CIOFields< TypeTag, TTag::RANS >	The specific I/O fields
CIOFields< TypeTag, TTag::RANSNI >	The specific non-isothermal I/O fields
CIOFields< TypeTag, TTag::Richards >	Set the vtk output fields specific to this model
CIOFields< TypeTag, TTag::RichardsNC >	Set the vtk output fields specific to this model
CIOFields< TypeTag, TTag::RichardsNI >	Set the vtk output fields specific to th non-isothermal model
CIOFields< TypeTag, TTag::ShallowWater >
CIOFields< TypeTag, TTag::SolidEnergy >	Set the vtk output fields specific to this model
CIOFields< TypeTag, TTag::ThreeP >	Set the vtk output fields specific to this model
CIOFields< TypeTag, TTag::ThreePNI >	Set non-isothermal output fields
CIOFields< TypeTag, TTag::ThreePThreeC >	Set the vtk output fields specific to this model
CIOFields< TypeTag, TTag::ThreePThreeCNI >	Set the non-isothermal vktoutputfields
CIOFields< TypeTag, TTag::ThreePWaterOilNI >	Set the non-isothermal vkt output fields
CIOFields< TypeTag, TTag::Tracer >	Set the vtk output fields specific to this model
CIOFields< TypeTag, TTag::TwoP >	Set the vtk output fields specific to the twop model
CIOFields< TypeTag, TTag::TwoPNC >	Set the vtk output fields specific to this model
CIOFields< TypeTag, TTag::TwoPNCMin >	Set the vtk output fields specific to this model
CIOFields< TypeTag, TTag::TwoPNCMinNI >	Non-isothermal vtkoutput
CIOFields< TypeTag, TTag::TwoPNCNI >	Set non-isothermal output fields
CIOFields< TypeTag, TTag::TwoPNI >	Set the vtk output fields specific to the non-isothermal twop model
CIOFields< TypeTag, TTag::TwoPOneCNI >	The non-isothermal vtk output fields
CIOFields< TypeTag, TTag::TwoPTwoCComparison >
CIOFields< TypeTag, TTag::TwoPTwoCNI >	Set non-isothermal output fields
CIOFields< TypeTag, TTag::ZeroEqNC >	The specific I/O fields
CIOFields< TypeTag, TTag::ZeroEqNCNI >	The specific I/O fields
CJacobianMatrix	Type of the global jacobian matrix
CJacobianMatrix< TypeTag, TTag::FiniteVolumeModel >	Set the type of a global jacobian matrix from the solution types TODO: move to LinearAlgebra traits
CJacobianMatrix< TypeTag, TTag::StaggeredModel >	Set the type of a global jacobian matrix from the solution types TODO: move to LinearAlgebra traits
CKEpsilonModelTraits	Traits for the k-epsilon model
CKEpsilonNCModelTraits	Traits for the low-Reynolds k-epsilon multi-component model states some specifics of the isothermal multi-component low-Reynolds k-epsilon model
CKOmegaModelTraits	Traits for the k-omega model
CKOmegaNCModelTraits	Traits for the k-omega multi-component modelstates some specifics of the isothermal multi-component k-omega model
CLinearSolver	TODO: Remove this property as soon as the decoupled models are integrated
CLocalResidual
CLocalResidual< TypeTag, TTag::BloodFlow >
CLocalResidual< TypeTag, TTag::Elastic >	Use the local residual of the elastic model
CLocalResidual< TypeTag, TTag::Fracture >
CLocalResidual< TypeTag, TTag::IncompressibleTest >
CLocalResidual< TypeTag, TTag::KEpsilon >	The local residual
CLocalResidual< TypeTag, TTag::KEpsilonNC >	The local residual
CLocalResidual< TypeTag, TTag::KEpsilonNCNI >	The local residual
CLocalResidual< TypeTag, TTag::KOmega >	The local residual
CLocalResidual< TypeTag, TTag::KOmegaNC >	The local residual
CLocalResidual< TypeTag, TTag::KOmegaNCNI >	The local residual
CLocalResidual< TypeTag, TTag::LowReKEpsilon >	The local residual
CLocalResidual< TypeTag, TTag::LowReKEpsilonNC >	The local residual
CLocalResidual< TypeTag, TTag::LowReKEpsilonNCNI >	The local residual
CLocalResidual< TypeTag, TTag::Matrix >
CLocalResidual< TypeTag, TTag::MPNC >	Use the MpNc local residual for the MpNc model
CLocalResidual< TypeTag, TTag::NavierStokes >	The local residual
CLocalResidual< TypeTag, TTag::NavierStokesNC >	The local residual
CLocalResidual< TypeTag, TTag::NonEquilibrium >
CLocalResidual< TypeTag, TTag::OneEq >	The local residual
CLocalResidual< TypeTag, TTag::OneEqNC >	The local residual
CLocalResidual< TypeTag, TTag::OneEqNCNI >	The local residual
CLocalResidual< TypeTag, TTag::OneP >	Local residual function
CLocalResidual< TypeTag, TTag::OnePIncompressible >
CLocalResidual< TypeTag, TTag::OnePNC >	The local residual function
CLocalResidual< TypeTag, TTag::OnePNCMin >
CLocalResidual< TypeTag, TTag::PoroElastic >	Use the local residual of the poro-elastic model
CLocalResidual< TypeTag, TTag::Richards >	The local residual operator
CLocalResidual< TypeTag, TTag::RichardsNC >	Use the dedicated local residual
CLocalResidual< TypeTag, TTag::Root >
CLocalResidual< TypeTag, TTag::ShallowWater >
CLocalResidual< TypeTag, TTag::SolidEnergy >	Set the local residual
CLocalResidual< TypeTag, TTag::ThreeP >	The local residual function of the conservation equations
CLocalResidual< TypeTag, TTag::ThreePThreeC >	The local residual function of the conservation equations
CLocalResidual< TypeTag, TTag::ThreePWaterOilNI >	The local residual function of the conservation equations
CLocalResidual< TypeTag, TTag::Tissue >
CLocalResidual< TypeTag, TTag::Tracer >	Use the tracer local residual function for the tracer model
CLocalResidual< TypeTag, TTag::TwoP >	Use the immiscible local residual operator for the 2p model
CLocalResidual< TypeTag, TTag::TwoPIncompressible >
CLocalResidual< TypeTag, TTag::TwoPIncompressibleBoxDfm >
CLocalResidual< TypeTag, TTag::TwoPNC >	Use the compositional local residual
CLocalResidual< TypeTag, TTag::TwoPNCMin >
CLocalResidual< TypeTag, TTag::TwoPOneCNI >	The specific local residual (i.e. balance equations)
CLowReKEpsilonModelTraits	Traits for the low-Reynolds k-epsilon model
CLowReKEpsilonNCModelTraits	Traits for the low-Reynolds k-epsilon multi-component modelstates some specifics of the isothermal multi-component low-Reynolds k-epsilon model
CMaterialLaw
CMaterialLaw< TypeTag, TTag::Test2P2CSpatialParams >
CMaterialLaw< TypeTag, TTag::Test2PSpatialParams >
CMaterialLaw< TypeTag, TTag::Test3d2pSpatialParams >
CMaterialLaw< TypeTag, TTag::TestDiffusionSpatialParams >
CMaterialLaw< TypeTag, TTag::TestDiffusionSpatialParams3d >
CMaterialLaw< TypeTag, TTag::TestIMPESAdaptiveSpatialParams >
CMaterialLaw< TypeTag, TTag::TestIMPESSpatialParams >
CMaterialLaw< TypeTag, TTag::TestTransportSpatialParams >
CMaxIntersections< TypeTag, TTag::SequentialModel >	Default number of intersections for quadrilaterals
CMaxwellStefanFluidSystem	A simple fluid system with three components for testing the multi-component diffusion with the Maxwell-Stefan formulation
CMaxwellStefanTracerFluidSystem	A simple fluid system with one MaxwellStefan component
CModel< TypeTag, TTag::TransportTwoP >
CModelDefaultParameters	Property which defines the group that is queried for parameters by default
CModelDefaultParameters< TypeTag, TTag::ModelProperties >	Do not specific any model-specific default parameters here
CModelDefaultParameters< TypeTag, TTag::SequentialModel >	Do not specific any model-specific default parameters here
CModelTraits	Traits class encapsulating model specifications
CModelTraits< TypeTag, TTag::Elastic >	The model traits of the elastic model
CModelTraits< TypeTag, TTag::KEpsilon >	< states some specifics of the isothermal k-epsilon model
CModelTraits< TypeTag, TTag::KEpsilonNC >
CModelTraits< TypeTag, TTag::KEpsilonNCNI >	The model traits of the non-isothermal model
CModelTraits< TypeTag, TTag::KEpsilonNI >	The model traits of the non-isothermal model
CModelTraits< TypeTag, TTag::KOmega >	States some specifics of the isothermal k-omega model
CModelTraits< TypeTag, TTag::KOmegaNC >
CModelTraits< TypeTag, TTag::KOmegaNCNI >	The model traits of the non-isothermal model
CModelTraits< TypeTag, TTag::KOmegaNI >	The model traits of the non-isothermal model
CModelTraits< TypeTag, TTag::LowReKEpsilon >	< states some specifics of the isothermal low-Reynolds k-epsilon model
CModelTraits< TypeTag, TTag::LowReKEpsilonNC >
CModelTraits< TypeTag, TTag::LowReKEpsilonNCNI >	The model traits of the non-isothermal model
CModelTraits< TypeTag, TTag::LowReKEpsilonNI >	The model traits of the non-isothermal model
CModelTraits< TypeTag, TTag::MPNC >	Set the model traits property
CModelTraits< TypeTag, TTag::MPNCNI >	Set the non-isothermal model traits
CModelTraits< TypeTag, TTag::MPNCNonequil >
CModelTraits< TypeTag, TTag::NavierStokes >
CModelTraits< TypeTag, TTag::NavierStokesNC >	< states some specifics of the free-flow model
CModelTraits< TypeTag, TTag::NavierStokesNCNI >	The model traits of the non-isothermal model
CModelTraits< TypeTag, TTag::NavierStokesNI >	The model traits of the non-isothermal model
CModelTraits< TypeTag, TTag::NonEquilibrium >	Set the model traits
CModelTraits< TypeTag, TTag::OneEq >	< states some specifics of the isothermal Spalart-Allmaras model
CModelTraits< TypeTag, TTag::OneEqNC >
CModelTraits< TypeTag, TTag::OneEqNCNI >	The model traits of the non-isothermal model
CModelTraits< TypeTag, TTag::OneEqNI >	The model traits of the non-isothermal model
CModelTraits< TypeTag, TTag::OneP >	Default the actually used traits to the base traits
CModelTraits< TypeTag, TTag::OnePNC >	Default the actually used traits to the base traits
CModelTraits< TypeTag, TTag::OnePNCMin >	Use non-mineralization model traits with 1pnc traits
CModelTraits< TypeTag, TTag::OnePNCMinNI >	The non-isothermal model traits
CModelTraits< TypeTag, TTag::OnePNCNI >	Model traits of the non-isothermal model
CModelTraits< TypeTag, TTag::OnePNCNonEquil >
CModelTraits< TypeTag, TTag::OnePNI >	The model traits of the non-isothermal model
CModelTraits< TypeTag, TTag::PoroElastic >	The deault model traits of the poro-elastic model
CModelTraits< TypeTag, TTag::RANS >	The model traits of the isothermal model
CModelTraits< TypeTag, TTag::RANSNI >	The model traits of the non-isothermal model
CModelTraits< TypeTag, TTag::Richards >	The model traits
CModelTraits< TypeTag, TTag::RichardsNC >
CModelTraits< TypeTag, TTag::RichardsNCNI >	Set non-isothermal model traits
CModelTraits< TypeTag, TTag::RichardsNI >	Set non-isothermal model traits
CModelTraits< TypeTag, TTag::SequentialModel >
CModelTraits< TypeTag, TTag::ShallowWater >
CModelTraits< TypeTag, TTag::SolidEnergy >	Set the model traits
CModelTraits< TypeTag, TTag::ThreeP >	Set the model traits
CModelTraits< TypeTag, TTag::ThreePNI >	Set non-isothermal model traits
CModelTraits< TypeTag, TTag::ThreePThreeC >
CModelTraits< TypeTag, TTag::ThreePThreeCNI >	Set non-isothermal NumEq
CModelTraits< TypeTag, TTag::ThreePWaterOilNI >	Set the non-isothermal model traits property
CModelTraits< TypeTag, TTag::Tracer >	Set the model traits
CModelTraits< TypeTag, TTag::TracerTestBulk >	Set the model traits (with disabled diffusion)
CModelTraits< TypeTag, TTag::TracerTestLowDim >	Set the model traits (with disabled diffusion)
CModelTraits< TypeTag, TTag::TwoP >	Default the actually used traits to the base traits
CModelTraits< TypeTag, TTag::TwoPNC >	Default the actually used traits to the base traits
CModelTraits< TypeTag, TTag::TwoPNCMin >	The 2pnc model traits define the non-mineralization part
CModelTraits< TypeTag, TTag::TwoPNCMinNI >	Set non-isothermal model traits
CModelTraits< TypeTag, TTag::TwoPNCNI >	Set the non-isothermal model traits
CModelTraits< TypeTag, TTag::TwoPNI >	The non-isothermal model traits class
CModelTraits< TypeTag, TTag::TwoPOneCNI >	Set the non-isothermal model traits
CModelTraits< TypeTag, TTag::TwoPTwoC >
CModelTraits< TypeTag, TTag::TwoPTwoCNI >	Set the non-isothermal model traits
CModelTraits< TypeTag, TTag::TwoPTwoCNINonEquil >	Set the non-isothermal model traits with the nonequilibrium model traits as isothermal traits
CModelTraits< TypeTag, TTag::TwoPTwoCNonEquil >
CModelTraits< TypeTag, TTag::ZeroEq >
CModelTraits< TypeTag, TTag::ZeroEqNC >	The model traits of the isothermal model
CModelTraits< TypeTag, TTag::ZeroEqNCNI >	The model traits of the non-isothermal model
CModelTraits< TypeTag, TTag::ZeroEqNI >	The model traits of the non-isothermal model
CMolecularDiffusionType	The type for the calculation of the molecular diffusion fluxes
CMolecularDiffusionType< TypeTag, TTag::DarcyOnePThreeC >
CMolecularDiffusionType< TypeTag, TTag::DarcyOnePTwoC >
CMolecularDiffusionType< TypeTag, TTag::MaxwellStefanNCTest >	Here we set FicksLaw or MaxwellStefansLaw
CMolecularDiffusionType< TypeTag, TTag::MaxwellStefanOnePThreeCTest >	Here we set FicksLaw or MaxwellStefansLaw
CMolecularDiffusionType< TypeTag, TTag::MaxwellStefanTest >	Here we set FicksLaw or MaxwellStefansLaw
CMolecularDiffusionType< TypeTag, TTag::NavierStokesNC >	Use Fick's law for molecular diffusion per default
CMolecularDiffusionType< TypeTag, TTag::PorousMediumFlow >	By default, we use fick's law for the diffusive fluxes
CMolecularDiffusionType< TypeTag, TTag::StokesOnePThreeC >
CMolecularDiffusionType< TypeTag, TTag::StokesOnePTwoC >
CMolecularDiffusionType< TypeTag, TTag::TwoPNCDiffusion >	Here we set FicksLaw or TwoPNCDiffusionsLaw
CNormalizePressure	Returns whether to normalize the pressure term in the momentum balance or not
CNormalizePressure< TypeTag, TTag::NavierStokes >	Normalize the pressure term in the momentum balance by default
CNormalizePressure< TypeTag, TTag::NavierStokesAnalytic >
CNormalizePressure< TypeTag, TTag::NavierStokesNC >	Normalize the pressure term in the momentum balance by default
CNumComponents< TypeTag, TTag::SequentialTwoPTwoC >	< The number of components in the 2p2c model is 2
CNumEnergyEqFluid
CNumEnergyEqFluid< TypeTag, TTag::CombustionOneComponent >
CNumEnergyEqFluid< TypeTag, TTag::NonEquilibrium >
CNumEnergyEqSolid
CNumEnergyEqSolid< TypeTag, TTag::CombustionOneComponent >
CNumEnergyEqSolid< TypeTag, TTag::NonEquilibrium >	Default values for the number of energy balance equations
CNumEqBalance
CNumEqCellCenter	The number of equations for cell-centered dofs
CNumEqCellCenter< TypeTag, TTag::StaggeredFreeFlowModel >	For free flow models, we take the number of "physical" equations (e.g. 4 for a 3D NavierStokes problem, 3 velocity components and pressure) and substract the number of dimensions. This yields the number of equations to be solved on the cell centers. Works also for non-isothermal models
CNumEqFace	The number of equations for face dofs
CNumEqFace< TypeTag, TTag::StaggeredFreeFlowModel >	Set the number of equations on the faces to 1. We only consider scalar values because the velocity vector is normal to the face
CNumEqVector	A vector of size number equations that can be used for Neumann fluxes, sources, residuals, ..
CNumEqVector< TypeTag, TTag::ModelProperties >	Set the default vector with size number of equations to a field vector
CNumPhases< TypeTag, TTag::SequentialTwoPTwoC >	< The number of phases in the 2p2c model is 2
CNusseltFormulation
CNusseltFormulation< TypeTag, TTag::NonEquilibrium >
COneEqModelTraits	Traits for the Spalart-Allmaras model
COneEqNCModelTraits	Traits for the one-equation multi-component modelstates some specifics of the isothermal multi-component one-equation model
COnlyGasPhaseCanDisappear	Reduces the phasestates to threePhases and wnPhaseOnly
COnlyGasPhaseCanDisappear< TypeTag, TTag::Sagd >
COnlyGasPhaseCanDisappear< TypeTag, TTag::ThreePWaterOilNI >	Determines whether a constraint solver should be used explicitly
CPointSource	Property defining the type of point source used
CPointSource< TypeTag, TTag::BULKTYPETAG >
CPointSource< TypeTag, TTag::Fracture >
CPointSource< TypeTag, TTag::GridProperties >	Use the minimal point source implementation as default
CPointSource< TypeTag, TTag::LOWDIMTYPETAG >
CPointSource< TypeTag, TTag::Matrix >
CPointSource< TypeTag, TTag::OnePSingularityTimeDependentCCTpfa >
CPointSource< TypeTag, TTag::RichardsWellTracer >
CPointSource< TypeTag, TTag::Root >
CPointSource< TypeTag, TTag::Soil >
CPointSource< TypeTag, TTag::SOILTYPETAG >
CPointSourceHelper	Property defining the class that computes which sub control volume point sources belong to
CPointSourceHelper< TypeTag, TTag::BULKTYPETAG >
CPointSourceHelper< TypeTag, TTag::Fracture >
CPointSourceHelper< TypeTag, TTag::GridProperties >	Use the point source helper using the bounding box tree as a default
CPointSourceHelper< TypeTag, TTag::LOWDIMTYPETAG >
CPointSourceHelper< TypeTag, TTag::Matrix >
CPointSourceHelper< TypeTag, TTag::Root >
CPointSourceHelper< TypeTag, TTag::Soil >
CPointSourceHelper< TypeTag, TTag::SOILTYPETAG >
CPressureCoefficientMatrix< TypeTag, TTag::Pressure >
CPressureFormulation
CPressureFormulation< TypeTag, TTag::CombustionOneComponent >	Set the default pressure formulation: either pw first or pn first
CPressureFormulation< TypeTag, TTag::EvaporationAtmosphere >	Set the default pressure formulation: either pw first or pn first
CPressureFormulation< TypeTag, TTag::MPNC >	Set the default pressure formulation to the pressure of the (most) wetting phase
CPressureRHSVector< TypeTag, TTag::Pressure >
CPrimaryInteractionVolume	The primary interaction volume type
CPrimaryInteractionVolume< TypeTag, TTag::CCMpfaFacetCouplingModel >	Use the facet coupling-specific mpfa-o interaction volume
CPrimaryInteractionVolume< TypeTag, TTag::CCMpfaModel >	Per default, we use the dynamic mpfa-o interaction volume
CPrimaryInteractionVolume< TypeTag, TTag::InjectionCCMpfa >
CPrimaryVariables	A vector of primary variables
CPrimaryVariables< TypeTag, TTag::ModelProperties >	Set the default primary variable vector to a vector of size of number of equations
CPrimaryVariables< TypeTag, TTag::Richards >	The primary variables vector for the richards model
CPrimaryVariables< TypeTag, TTag::ThreePThreeC >	The primary variables vector for the 3p3c model
CPrimaryVariables< TypeTag, TTag::ThreePWaterOilNI >	The primary variables vector for the 3p3c model
CPrimaryVariables< TypeTag, TTag::TwoPNC >	The primary variables vector for the 2pnc model
CPrimaryVariables< TypeTag, TTag::TwoPOneCNI >	The primary variables vector for the 2p1cni model
CProblem	Property to specify the type of a problem which has to be solved
CProblem< TypeTag, TTag::AngeliTest >
CProblem< TypeTag, TTag::BloodFlow >
CProblem< TypeTag, TTag::ChannelNCTest >
CProblem< TypeTag, TTag::ChannelTest >
CProblem< TypeTag, TTag::ClosedSystemTest >
CProblem< TypeTag, TTag::Column >
CProblem< TypeTag, TTag::CombustionOneComponent >
CProblem< TypeTag, TTag::DamBreakWet >
CProblem< TypeTag, TTag::DarcyOneP >
CProblem< TypeTag, TTag::DarcyOnePThreeC >
CProblem< TypeTag, TTag::DarcyOnePTwoC >
CProblem< TypeTag, TTag::DarcyTwoP >
CProblem< TypeTag, TTag::DarcyTwoPTwoC >
CProblem< TypeTag, TTag::DensityDrivenFlow >
CProblem< TypeTag, TTag::Dissolution >
CProblem< TypeTag, TTag::DoneaTest >
CProblem< TypeTag, TTag::EvaporationAtmosphere >
CProblem< TypeTag, TTag::Fracture >	The grid type
CProblem< TypeTag, TTag::FuelCell >
CProblem< TypeTag, TTag::Heterogeneous >
CProblem< TypeTag, TTag::IncompressibleTest >
CProblem< TypeTag, TTag::InfiltrationThreeP >
CProblem< TypeTag, TTag::InfiltrationThreePThreeC >
CProblem< TypeTag, TTag::Injection >
CProblem< TypeTag, TTag::Injection2PNITypeTag >
CProblem< TypeTag, TTag::InjectionProblem >
CProblem< TypeTag, TTag::KovasznayTest >
CProblem< TypeTag, TTag::Kuevette >
CProblem< TypeTag, TTag::Matrix >
CProblem< TypeTag, TTag::MaxwellStefanNCTest >
CProblem< TypeTag, TTag::MaxwellStefanOnePThreeCTest >
CProblem< TypeTag, TTag::MaxwellStefanTest >
CProblem< TypeTag, TTag::MPNCComparison >
CProblem< TypeTag, TTag::NavierStokesAnalytic >
CProblem< TypeTag, TTag::Obstacle >
CProblem< TypeTag, TTag::OnePBulk >
CProblem< TypeTag, TTag::OnePCompressible >
CProblem< TypeTag, TTag::OnePEdge >
CProblem< TypeTag, TTag::OnePFacet >
CProblem< TypeTag, TTag::OnePIncompressible >
CProblem< TypeTag, TTag::OnePInternalDirichlet >
CProblem< TypeTag, TTag::OnePLowDim >
CProblem< TypeTag, TTag::OnePNIConduction >
CProblem< TypeTag, TTag::OnePNIConvection >
CProblem< TypeTag, TTag::OnePSingularity >
CProblem< TypeTag, TTag::OnePSingularityTimeDependentCCTpfa >
CProblem< TypeTag, TTag::OnePSub >
CProblem< TypeTag, TTag::OnePSub0 >
CProblem< TypeTag, TTag::OnePSub1 >
CProblem< TypeTag, TTag::OnePTest >
CProblem< TypeTag, TTag::OnePTwoCNIConduction >
CProblem< TypeTag, TTag::OnePTwoCNIConvection >
CProblem< TypeTag, TTag::OnePTwoCNITransientBC >
CProblem< TypeTag, TTag::OnePTwoCTest >
CProblem< TypeTag, TTag::OnePTwoCThermalNonequilibrium >
CProblem< TypeTag, TTag::PoroElasticSub >
CProblem< TypeTag, TTag::RANSModel >
CProblem< TypeTag, TTag::RANSNCModel >
CProblem< TypeTag, TTag::RichardsAnalytical >
CProblem< TypeTag, TTag::RichardsLens >
CProblem< TypeTag, TTag::RichardsNIConduction >
CProblem< TypeTag, TTag::RichardsNIConvection >
CProblem< TypeTag, TTag::RichardsNIEvaporation >
CProblem< TypeTag, TTag::RichardsWellTracer >
CProblem< TypeTag, TTag::Root >
CProblem< TypeTag, TTag::RoughChannel >
CProblem< TypeTag, TTag::Sagd >
CProblem< TypeTag, TTag::Salinization >
CProblem< TypeTag, TTag::SaltWaterIntrusionTest >
CProblem< TypeTag, TTag::SincosTest >
CProblem< TypeTag, TTag::Soil >
CProblem< TypeTag, TTag::SolidEnergyTest >
CProblem< TypeTag, TTag::StaggeredPVNamesTestTypeTag >
CProblem< TypeTag, TTag::StokesOneP >
CProblem< TypeTag, TTag::StokesOnePThreeC >
CProblem< TypeTag, TTag::StokesOnePTwoC >
CProblem< TypeTag, TTag::TestElastic >
CProblem< TypeTag, TTag::TestPoroElastic >
CProblem< TypeTag, TTag::ThermoChem >
CProblem< TypeTag, TTag::ThreeDChannelTest >
CProblem< TypeTag, TTag::ThreePNIConduction >
CProblem< TypeTag, TTag::ThreePNIConvection >
CProblem< TypeTag, TTag::Tissue >
CProblem< TypeTag, TTag::TracerTest >
CProblem< TypeTag, TTag::TracerTestBulk >
CProblem< TypeTag, TTag::TracerTestLowDim >
CProblem< TypeTag, TTag::TubesTest >
CProblem< TypeTag, TTag::TwoPAdaptivePointSource >	Use non-conforming refinement in the cell-centered tests, conforming for box
CProblem< TypeTag, TTag::TwoPIncompressible >
CProblem< TypeTag, TTag::TwoPIncompressibleAdaptiveBox >
CProblem< TypeTag, TTag::TwoPIncompressibleAdaptiveMpfa >
CProblem< TypeTag, TTag::TwoPIncompressibleAdaptiveTpfa >
CProblem< TypeTag, TTag::TwoPIncompressibleBoxDfm >
CProblem< TypeTag, TTag::TwoPNCDiffusion >
CProblem< TypeTag, TTag::TwoPSub >
CProblem< TypeTag, TTag::TwoPTracerTest >
CProblem< TypeTag, TTag::TwoPTwoCChemicalNonequilibrium >
CProblem< TypeTag, TTag::TwoPTwoCComparison >
CProblem< TypeTag, TTag::WaterAir >
CRANSModelTraits	Traits for the Reynolds-averaged Navier-Stokes model
CReplaceCompEqIdx	The component balance index that should be replaced by the total mass/mole balance
CReplaceCompEqIdx< TypeTag, TTag::ChannelNCTest >
CReplaceCompEqIdx< TypeTag, TTag::DarcyOnePThreeC >
CReplaceCompEqIdx< TypeTag, TTag::DarcyOnePTwoC >
CReplaceCompEqIdx< TypeTag, TTag::DarcyTwoPTwoC >
CReplaceCompEqIdx< TypeTag, TTag::DensityDrivenFlow >
CReplaceCompEqIdx< TypeTag, TTag::Dissolution >	Replace gas balance by total mass balance
CReplaceCompEqIdx< TypeTag, TTag::MaxwellStefanNCTest >
CReplaceCompEqIdx< TypeTag, TTag::MPNC >	Per default, no component mass balance is replaced
CReplaceCompEqIdx< TypeTag, TTag::NavierStokesNC >
CReplaceCompEqIdx< TypeTag, TTag::OnePNC >	Set as default that no component mass balance is replaced by the total mass balance
CReplaceCompEqIdx< TypeTag, TTag::RANSNCModel >
CReplaceCompEqIdx< TypeTag, TTag::RichardsNC >
CReplaceCompEqIdx< TypeTag, TTag::Salinization >	Replace gas balance by total mass balance
CReplaceCompEqIdx< TypeTag, TTag::StokesOnePThreeC >
CReplaceCompEqIdx< TypeTag, TTag::StokesOnePTwoC >
CReplaceCompEqIdx< TypeTag, TTag::ThreePThreeC >	Set as default that no component mass balance is replaced by the total mass balance
CReplaceCompEqIdx< TypeTag, TTag::ThreePWaterOilNI >	Set as default that no component mass balance is replaced by the total mass balance
CReplaceCompEqIdx< TypeTag, TTag::TwoPNC >	Per default, no component mass balance is replaced
CReverseTupleImpl
CReverseTupleImpl< Tuple, std::index_sequence< I... > >
CScalar	Property to specify the type of scalar values
CScalar< TypeTag, TTag::Base >
CScalar< TypeTag, TTag::CombustionOneComponent >
CScalar< TypeTag, TTag::EvaporationAtmosphere >
CScalar< TypeTag, TTag::ModelProperties >	Set the default type of scalar values to double
CScalar< TypeTag, TTag::MPNCComparison >
CScalar< TypeTag, TTag::Obstacle >
CScalar< TypeTag, TTag::OnePModel >
CScalar< TypeTag, TTag::OnePTest >
CScalar< TypeTag, TTag::StaggeredPVNamesTestTypeTag >
CScalar< TypeTag, TTag::TwoPTwoCChemicalNonequilibrium >
CScalar< TypeTag, TTag::TwoPTwoCComparison >
CSecondaryInteractionVolume	The secondary interaction volume type used e.g. on the boundaries
CSecondaryInteractionVolume< TypeTag, TTag::CCMpfaFacetCouplingModel >	Use the facet coupling-specific mpfa-o interaction volume
CSecondaryInteractionVolume< TypeTag, TTag::CCMpfaModel >	Per default, we use the dynamic mpfa-o interaction volume on boundaries
CSetMoleFractionsForFirstPhase	Set the mole fraction in the wetting or non-wetting phase
CSetMoleFractionsForFirstPhase< TypeTag, TTag::TwoPNC >	Set the primary variables mole fractions for the wetting or non-wetting phase
CSherwoodFormulation
CSherwoodFormulation< TypeTag, TTag::NonEquilibrium >	Set the default formulation for the sherwood correlation Other possible parametrizations can be found in the dimensionlessnumbers
CSolidState	The type of the solid state to use
CSolidState< TypeTag, TTag::Column >	The two-phase model uses the immiscible fluid state
CSolidState< TypeTag, TTag::CombustionOneComponent >
CSolidState< TypeTag, TTag::Geomechanics >	The solid state must be inert
CSolidState< TypeTag, TTag::OnePNCMin >	The two-phase model uses the immiscible fluid state
CSolidState< TypeTag, TTag::PorousMediumFlow >	Per default solid state is inert
CSolidState< TypeTag, TTag::TwoPNCMin >	The two-phase model uses the immiscible fluid state
CSolidSystem	The type of the solid system to use
CSolidSystem< TypeTag, TTag::Column >
CSolidSystem< TypeTag, TTag::CombustionOneComponent >
CSolidSystem< TypeTag, TTag::Dissolution >
CSolidSystem< TypeTag, TTag::EvaporationAtmosphere >
CSolidSystem< TypeTag, TTag::Geomechanics >	Per default we use one constant component in the inert solid system
CSolidSystem< TypeTag, TTag::PorousMediumFlow >
CSolidSystem< TypeTag, TTag::Sagd >
CSolidSystem< TypeTag, TTag::Salinization >
CSolidSystem< TypeTag, TTag::ThermoChem >
CSolutionDependentAdvection	If the parameters for the advective fluxes depend on the solution
CSolutionDependentAdvection< TypeTag, TTag::BloodFlow >
CSolutionDependentAdvection< TypeTag, TTag::Fracture >
CSolutionDependentAdvection< TypeTag, TTag::Matrix >
CSolutionDependentAdvection< TypeTag, TTag::PorousMediumFlow >	By default, parameters are solution-dependent
CSolutionDependentAdvection< TypeTag, TTag::Root >
CSolutionDependentAdvection< TypeTag, TTag::Soil >
CSolutionDependentAdvection< TypeTag, TTag::Tissue >
CSolutionDependentHeatConduction	If the parameters for the heat conduction fluxes depend on the solution
CSolutionDependentHeatConduction< TypeTag, TTag::BloodFlow >
CSolutionDependentHeatConduction< TypeTag, TTag::Fracture >
CSolutionDependentHeatConduction< TypeTag, TTag::Matrix >
CSolutionDependentHeatConduction< TypeTag, TTag::PorousMediumFlow >
CSolutionDependentHeatConduction< TypeTag, TTag::Root >
CSolutionDependentHeatConduction< TypeTag, TTag::Soil >
CSolutionDependentHeatConduction< TypeTag, TTag::Tissue >
CSolutionDependentMolecularDiffusion	If the parameters for the diffusive fluxes depend on the solution
CSolutionDependentMolecularDiffusion< TypeTag, TTag::BloodFlow >
CSolutionDependentMolecularDiffusion< TypeTag, TTag::Fracture >
CSolutionDependentMolecularDiffusion< TypeTag, TTag::Matrix >
CSolutionDependentMolecularDiffusion< TypeTag, TTag::PorousMediumFlow >
CSolutionDependentMolecularDiffusion< TypeTag, TTag::Root >
CSolutionDependentMolecularDiffusion< TypeTag, TTag::Soil >
CSolutionDependentMolecularDiffusion< TypeTag, TTag::Tissue >
CSolutionDependentMolecularDiffusion< TypeTag, TTag::TracerTestCC >
CSolutionDependentMolecularDiffusion< TypeTag, TTag::TwoPTracerTestTpfa >
CSolutionTypes< TypeTag, TTag::SequentialModel >	Specifies the types which are assoicated with a solution
CSolutionVector	Vector containing all primary variable vector of the grid
CSolutionVector< TypeTag, TTag::FiniteVolumeModel >	The type of a solution for the whole grid at a fixed time TODO: move to LinearAlgebra traits
CSolutionVector< TypeTag, TTag::SequentialModel >	For compatibility with new style models we need a solution vector type
CSolutionVector< TypeTag, TTag::StaggeredModel >	Default property value for the solution vector only used for monolithic solver TODO: move to LinearAlgebra traits
CSpatialParams	The type of the spatial parameters object
CSpatialParams< TypeTag, TTag::BloodFlow >
CSpatialParams< TypeTag, TTag::Column >
CSpatialParams< TypeTag, TTag::CombustionOneComponent >
CSpatialParams< TypeTag, TTag::DamBreakWet >
CSpatialParams< TypeTag, TTag::DarcyOneP >
CSpatialParams< TypeTag, TTag::DarcyOnePThreeC >
CSpatialParams< TypeTag, TTag::DarcyOnePTwoC >
CSpatialParams< TypeTag, TTag::DarcyTwoP >
CSpatialParams< TypeTag, TTag::DarcyTwoPTwoC >
CSpatialParams< TypeTag, TTag::Dissolution >
CSpatialParams< TypeTag, TTag::EvaporationAtmosphere >
CSpatialParams< TypeTag, TTag::Fracture >
CSpatialParams< TypeTag, TTag::FuelCell >
CSpatialParams< TypeTag, TTag::Heterogeneous >
CSpatialParams< TypeTag, TTag::IncompressibleTest >
CSpatialParams< TypeTag, TTag::InfiltrationThreeP >
CSpatialParams< TypeTag, TTag::InfiltrationThreePThreeC >
CSpatialParams< TypeTag, TTag::Injection >
CSpatialParams< TypeTag, TTag::Injection2PNITypeTag >
CSpatialParams< TypeTag, TTag::InjectionProblem >
CSpatialParams< TypeTag, TTag::Kuevette >
CSpatialParams< TypeTag, TTag::Matrix >
CSpatialParams< TypeTag, TTag::MaxwellStefanOnePThreeCTest >
CSpatialParams< TypeTag, TTag::MaxwellStefanTest >
CSpatialParams< TypeTag, TTag::MPNCComparison >
CSpatialParams< TypeTag, TTag::Obstacle >
CSpatialParams< TypeTag, TTag::OnePBulk >
CSpatialParams< TypeTag, TTag::OnePCompressible >
CSpatialParams< TypeTag, TTag::OnePEdge >
CSpatialParams< TypeTag, TTag::OnePFacet >
CSpatialParams< TypeTag, TTag::OnePIncompressible >
CSpatialParams< TypeTag, TTag::OnePLowDim >
CSpatialParams< TypeTag, TTag::OnePNIConduction >
CSpatialParams< TypeTag, TTag::OnePNIConvection >
CSpatialParams< TypeTag, TTag::OnePSingularity >
CSpatialParams< TypeTag, TTag::OnePSub >
CSpatialParams< TypeTag, TTag::OnePTest >
CSpatialParams< TypeTag, TTag::OnePTwoCNIConduction >
CSpatialParams< TypeTag, TTag::OnePTwoCNIConvection >
CSpatialParams< TypeTag, TTag::OnePTwoCNITransientBC >
CSpatialParams< TypeTag, TTag::OnePTwoCTest >
CSpatialParams< TypeTag, TTag::OnePTwoCThermalNonequilibrium >
CSpatialParams< TypeTag, TTag::PoroElasticSub >
CSpatialParams< TypeTag, TTag::RichardsAnalytical >
CSpatialParams< TypeTag, TTag::RichardsLens >
CSpatialParams< TypeTag, TTag::RichardsNIConduction >
CSpatialParams< TypeTag, TTag::RichardsNIConvection >
CSpatialParams< TypeTag, TTag::RichardsNIEvaporation >
CSpatialParams< TypeTag, TTag::RichardsWellTracer >
CSpatialParams< TypeTag, TTag::Root >
CSpatialParams< TypeTag, TTag::RoughChannel >
CSpatialParams< TypeTag, TTag::Sagd >
CSpatialParams< TypeTag, TTag::Salinization >
CSpatialParams< TypeTag, TTag::SaltWaterIntrusionTest >
CSpatialParams< TypeTag, TTag::Soil >
CSpatialParams< TypeTag, TTag::SolidEnergyTest >
CSpatialParams< TypeTag, TTag::TestElastic >
CSpatialParams< TypeTag, TTag::TestPoroElastic >
CSpatialParams< TypeTag, TTag::ThermoChem >
CSpatialParams< TypeTag, TTag::ThreePNIConduction >
CSpatialParams< TypeTag, TTag::ThreePNIConvection >
CSpatialParams< TypeTag, TTag::Tissue >
CSpatialParams< TypeTag, TTag::TracerTest >
CSpatialParams< TypeTag, TTag::TracerTestBulk >
CSpatialParams< TypeTag, TTag::TracerTestLowDim >
CSpatialParams< TypeTag, TTag::TubesTest >
CSpatialParams< TypeTag, TTag::TwoPIncompressible >
CSpatialParams< TypeTag, TTag::TwoPIncompressibleBoxDfm >
CSpatialParams< TypeTag, TTag::TwoPNCDiffusion >
CSpatialParams< TypeTag, TTag::TwoPSub >
CSpatialParams< TypeTag, TTag::TwoPTracerTest >
CSpatialParams< TypeTag, TTag::TwoPTwoCChemicalNonequilibrium >
CSpatialParams< TypeTag, TTag::TwoPTwoCComparison >
CSpatialParams< TypeTag, TTag::WaterAir >
CStaggeredFaceSolution	A vector containing the solution for a face (similar to ElementSolution)
CStaggeredFaceSolution< TypeTag, TTag::StaggeredModel >	Set the face solution type
CStaggeredPrimaryVariables	The hybrid primary variables container type
CStressType	The type used for the evaluation of stress tensors and forces
CStressType< TypeTag, TTag::Elastic >	By default, we use hooke's law for stress evaluations
CStressType< TypeTag, TTag::PoroElastic >	Per default, we use effective stresses on the basis of Hooke's Law
CThermalConductivityModel	Model to be used for the calculation of the effective conductivity
CThermalConductivityModel< TypeTag, TTag::MPNCNonequil >	In case we do not assume full non-equilibrium one needs a thermal conductivity
CThermalConductivityModel< TypeTag, TTag::OnePNCMinNI >	Use the average for effective conductivities
CThermalConductivityModel< TypeTag, TTag::OnePNCNI >	Use the average for effective conductivities
CThermalConductivityModel< TypeTag, TTag::OnePNCNonEquil >	In case we do not assume full non-equilibrium one needs a thermal conductivity
CThermalConductivityModel< TypeTag, TTag::OnePNI >	Use the average for effective conductivities
CThermalConductivityModel< TypeTag, TTag::RichardsNCNI >	Average is used as default model to compute the effective thermal heat conductivity
CThermalConductivityModel< TypeTag, TTag::RichardsNI >	Somerton is used as default model to compute the effective thermal heat conductivity
CThermalConductivityModel< TypeTag, TTag::SolidEnergy >	Use the average for effective conductivities
CThermalConductivityModel< TypeTag, TTag::ThreePNI >	Somerton is used as default model to compute the effective thermal heat conductivity
CThermalConductivityModel< TypeTag, TTag::ThreePThreeCNI >	Somerton is used as default model to compute the effective thermal heat conductivity
CThermalConductivityModel< TypeTag, TTag::ThreePWaterOilNI >	Somerton is used as default model to compute the effective thermal heat conductivity
CThermalConductivityModel< TypeTag, TTag::TwoPNCMinNI >	Use the effective thermal conductivities calculated using the Somerton method
CThermalConductivityModel< TypeTag, TTag::TwoPNCNI >	Somerton is used as default model to compute the effective thermal heat conductivity
CThermalConductivityModel< TypeTag, TTag::TwoPNI >	Somerton is used as default model to compute the effective thermal heat conductivity
CThermalConductivityModel< TypeTag, TTag::TwoPOneCNI >	Somerton is used as default model to compute the effective thermal heat conductivity
CThermalConductivityModel< TypeTag, TTag::TwoPTwoCNI >	Somerton is used as default model to compute the effective thermal heat conductivity
CThermalConductivityModel< TypeTag, TTag::TwoPTwoCNINonEquil >	Somerton is used as default model to compute the effective thermal heat conductivity
CThermalConductivityModel< TypeTag, TTag::TwoPTwoCNonEquil >	In case we do not assume full thermal non-equilibrium (e.g. only an energy balance for the solid phase and a fluid mixture) one needs a law for calculating the thermal conductivity of the fluid mixture
CTimeManager
CTracerFluidSystem	A simple fluid system with one tracer component
CTransportSolutionType< TypeTag, TTag::SequentialTwoPTwoC >
CTransportSolutionType< TypeTag, TTag::Transport >	Default implementation for the Vector of the transportet quantity
CUndefinedProperty	Tag to mark properties as undefined
CUpwindSchemeOrder	Specifies the order of the upwinding scheme (1 == first order, 2 == second order(tvd methods))
CUpwindSchemeOrder< TypeTag, TTag::KovasznayTest >
CUpwindSchemeOrder< TypeTag, TTag::StaggeredFreeFlowModel >	Set the order of the upwinding scheme to 1 by default
CUseBlockingOfSpuriousFlow	Determines whether blocking of spurious flow is used or not
CUseBlockingOfSpuriousFlow< TypeTag, TTag::InjectionProblem >
CUseBlockingOfSpuriousFlow< TypeTag, TTag::TwoPOneCNI >	Do not block spurious flows by default
CUseConstraintSolver	Whether to use a contraint solver for computing the secondary variables
CUseConstraintSolver< TypeTag, TTag::ThreePThreeC >	Determines whether a constraint solver should be used explicitly
CUseConstraintSolver< TypeTag, TTag::TwoPTwoC >	Determines whether the constraint solver is used
CUseMoles	Property whether to use moles or kg as amount unit for balance equations
CUseMoles< TypeTag, TTag::ChannelNCTest >
CUseMoles< TypeTag, TTag::DarcyOnePThreeC >
CUseMoles< TypeTag, TTag::DarcyOnePTwoC >
CUseMoles< TypeTag, TTag::DarcyTwoP >
CUseMoles< TypeTag, TTag::DarcyTwoPTwoC >
CUseMoles< TypeTag, TTag::DensityDrivenFlow >
CUseMoles< TypeTag, TTag::Heterogeneous >
CUseMoles< TypeTag, TTag::Injection >
CUseMoles< TypeTag, TTag::MaxwellStefanNCTest >
CUseMoles< TypeTag, TTag::MaxwellStefanOnePThreeCTest >
CUseMoles< TypeTag, TTag::MaxwellStefanTest >
CUseMoles< TypeTag, TTag::MPNC >	Use mole fractions in the balance equations by default
CUseMoles< TypeTag, TTag::MPNCComparison >
CUseMoles< TypeTag, TTag::NavierStokesNC >	Defines whether molar (true) or mass (false) density is used
CUseMoles< TypeTag, TTag::OnePNC >	Use mole fractions in the balance equations by default
CUseMoles< TypeTag, TTag::OnePTwoCNIConduction >
CUseMoles< TypeTag, TTag::OnePTwoCNIConvection >
CUseMoles< TypeTag, TTag::OnePTwoCNITransientBC >
CUseMoles< TypeTag, TTag::OnePTwoCTest >
CUseMoles< TypeTag, TTag::OnePTwoCThermalNonequilibrium >
CUseMoles< TypeTag, TTag::RANSNCModel >
CUseMoles< TypeTag, TTag::RichardsNC >	Define that per default mole fractions are used in the balance equations
CUseMoles< TypeTag, TTag::Root >
CUseMoles< TypeTag, TTag::Sagd >
CUseMoles< TypeTag, TTag::SaltWaterIntrusionTest >
CUseMoles< TypeTag, TTag::Soil >
CUseMoles< TypeTag, TTag::StokesOnePThreeC >
CUseMoles< TypeTag, TTag::StokesOnePTwoC >
CUseMoles< TypeTag, TTag::ThermoChem >
CUseMoles< TypeTag, TTag::ThreePThreeC >	Use mole fractions in the balance equations by default
CUseMoles< TypeTag, TTag::ThreePWaterOilNI >
CUseMoles< TypeTag, TTag::Tracer >	Define that mole fractions are used in the balance equations
CUseMoles< TypeTag, TTag::TracerTest >
CUseMoles< TypeTag, TTag::TracerTestBulk >
CUseMoles< TypeTag, TTag::TracerTestLowDim >
CUseMoles< TypeTag, TTag::TwoPNC >	Use mole fractions in the balance equations by default
CUseMoles< TypeTag, TTag::TwoPNCDiffusion >
CUseMoles< TypeTag, TTag::TwoPTracerTest >
CUseMoles< TypeTag, TTag::TwoPTwoCChemicalNonequilibrium >
CUseMoles< TypeTag, TTag::TwoPTwoCComparison >
CUseMoles< TypeTag, TTag::WaterAir >
CUseTpfaFlux
CUseTpfaFlux< TypeTag, TTag::CCTpfaDisc >
CVelocityOutput	Velocity calculation module to be used
CVelocityOutput< TypeTag, TTag::Geomechanics >	The (currently empty) velocity output
CVelocityOutput< TypeTag, TTag::PorousMediumFlow >	Velocity output
CVelocityOutput< TypeTag, TTag::StaggeredFreeFlowModel >	The velocity output
CVolumeVariables	The secondary variables within a sub-control volume
CVolumeVariables< TypeTag, TTag::Elastic >	Set the volume variables property
CVolumeVariables< TypeTag, TTag::KEpsilon >	Set the volume variables property
CVolumeVariables< TypeTag, TTag::KEpsilonNC >	Set the volume variables property
CVolumeVariables< TypeTag, TTag::KEpsilonNCNI >	Set the volume variables property
CVolumeVariables< TypeTag, TTag::KEpsilonNI >	Set the volume variables property
CVolumeVariables< TypeTag, TTag::KOmega >	Set the volume variables property
CVolumeVariables< TypeTag, TTag::KOmegaNC >	Set the volume variables property
CVolumeVariables< TypeTag, TTag::KOmegaNCNI >	Set the volume variables property
CVolumeVariables< TypeTag, TTag::KOmegaNI >	Set the volume variables property
CVolumeVariables< TypeTag, TTag::LowReKEpsilon >	Set the volume variables property
CVolumeVariables< TypeTag, TTag::LowReKEpsilonNC >	Set the volume variables property
CVolumeVariables< TypeTag, TTag::LowReKEpsilonNCNI >	Set the volume variables property
CVolumeVariables< TypeTag, TTag::LowReKEpsilonNI >	Set the volume variables property
CVolumeVariables< TypeTag, TTag::MPNC >	Set the volume variables property
CVolumeVariables< TypeTag, TTag::MPNCNonequil >	Use the mineralization volume variables together with the 2pnc vol vars
CVolumeVariables< TypeTag, TTag::NavierStokes >	Set the volume variables property
CVolumeVariables< TypeTag, TTag::NavierStokesNC >	Set the volume variables property
CVolumeVariables< TypeTag, TTag::OneEq >	Set the volume variables property
CVolumeVariables< TypeTag, TTag::OneEqNC >	Set the volume variables property
CVolumeVariables< TypeTag, TTag::OneEqNCNI >	Set the volume variables property
CVolumeVariables< TypeTag, TTag::OneEqNI >	Set the volume variables property
CVolumeVariables< TypeTag, TTag::OneP >	Set the volume variables property
CVolumeVariables< TypeTag, TTag::OnePNC >	Set the volume variables property
CVolumeVariables< TypeTag, TTag::OnePNCMin >	Use the mineralization volume variables together with the 1pnc vol vars
CVolumeVariables< TypeTag, TTag::OnePNCNonEquil >	Use the mineralization volume variables together with the 2pnc vol vars
CVolumeVariables< TypeTag, TTag::PoroElastic >	Set the volume variables property
CVolumeVariables< TypeTag, TTag::Richards >	Set the volume variables property
CVolumeVariables< TypeTag, TTag::RichardsNC >	Set the volume variables property
CVolumeVariables< TypeTag, TTag::ShallowWater >
CVolumeVariables< TypeTag, TTag::SolidEnergy >	Set the volume variables property
CVolumeVariables< TypeTag, TTag::ThreeP >	Set the volume variables property
CVolumeVariables< TypeTag, TTag::ThreePThreeC >	Set the volume variables property
CVolumeVariables< TypeTag, TTag::ThreePWaterOilNI >	Set the volume variables property
CVolumeVariables< TypeTag, TTag::Tracer >	Set the volume variables property
CVolumeVariables< TypeTag, TTag::TwoP >	Set the volume variables property
CVolumeVariables< TypeTag, TTag::TwoPNC >	Set the volume variables property
CVolumeVariables< TypeTag, TTag::TwoPNCMin >	Use the mineralization volume variables together with the 2pnc vol vars
CVolumeVariables< TypeTag, TTag::TwoPOneCNI >	Set the volume variables property
CVolumeVariables< TypeTag, TTag::TwoPTwoC >	Use the 2p2c VolumeVariables
CVolumeVariables< TypeTag, TTag::TwoPTwoCCO2 >	Co2 volume variables use the same traits as the 2p2c model
CVolumeVariables< TypeTag, TTag::TwoPTwoCCO2NI >
CVolumeVariables< TypeTag, TTag::TwoPTwoCNonEquil >	Use the nonequilibrium volume variables together with the 2p2c vol vars
CVolumeVariables< TypeTag, TTag::ZeroEq >	Set the volume variables property
CVolumeVariables< TypeTag, TTag::ZeroEqNC >	Set the volume variables property
CVolumeVariables< TypeTag, TTag::ZeroEqNCNI >	Set the volume variables property
CVolumeVariables< TypeTag, TTag::ZeroEqNI >	Set the volume variables property
CVtkOutputFields	A class helping models to define default vtk output parameters
CVtkOutputFields< TypeTag, TTag::ModelProperties >
CZeroEqModelTraits	Traits for the ZeroEq model
CZeroEqNCModelTraits	Traits for the Reynolds-averaged Navier-Stokes 0-Eq. model
►NShallowWater
CRiemannSolution
►NSolidSystems
CCompositionalSolidPhase	A solid phase consisting of multiple inert solid components
CInertSolidPhase	A solid phase consisting of a single inert solid component
►NTemp
►NCapabilities
CcanCommunicate
►NTest
CMyOtherVector
CMyVector
►NTriangulationPolicy
CDelaunayPolicy	Delaunay-type triangulations
CMidPointPolicy
►NVtk
CField	Struct that can hold any field that fulfills the VTKFunction interface
CVectorP0VTKFunction	VTK function that supports both scalar and vector values for each element
CVectorP1NonConformingVTKFunction	A VTK function that supports both scalar and vector values for each vertex. This expects the data to be organized by a two-dimensional field storing for each element the element-local nodal values. This can be used for the output of fields that are non-conforming due to e.g. constitutive relationships and where no extra degrees of freedom exist to disply the discontinuities
CVectorP1VTKFunction	VTK function that supports both scalar and vector values for each vertex
CAdaptive2p2c2d	Test problem for the adaptive sequential 2p2c model in 2D
CAdaptive2p2c3d	Test problem for the grid-adaptive 3d 2p2c model
CAdaptiveGridRestart	Indices denoting the different grid types
CAdaptiveGridRestart< Grid, true >	Provides a restart functionality for adaptive grids
CAdvectionCacheChooser
CAdvectionCacheChooser< TypeTag, true >
CAdvectionDataHandle	Data handle for quantities related to advection
CAdvectionDataHandle< MatVecTraits, PhysicsTraits, false >	Process-dependent data handles when related process is disabled
CAlwaysFalse	Template which always yields a false value
CAlwaysFalse< DisableStaticAssert >	Specialization of Dumux::AlwaysFalse for the struct defined above. This is done in order to deactivate the static_assert in the base classes of components. If the base class function is compiled we do not call it (see below)
CAmgTraitsImpl	The implementation is specialized for the different discretizations
CAmgTraitsImpl< Matrix, Vector, GridGeometry, DiscretizationMethod::box >	Box: use the non-overlapping AMG
CAmgTraitsImpl< Matrix, Vector, GridGeometry, DiscretizationMethod::ccmpfa >
CAmgTraitsImpl< Matrix, Vector, GridGeometry, DiscretizationMethod::cctpfa >	Cell-centered tpfa: use the overlapping AMG
CAngeliTestProblem	Test problem for the staggered grid (Angeli et al. 2017, [6])
CAwnSurfaceExpFct	Implementation of the exponential function relating specific interfacial area to wetting phase saturation and c apillary pressure as suggested by Nuske(2009) (Diploma thesis) [49]
CAwnSurfaceExpFctParams	Implementation of interfacial area surface params
CAwnSurfaceExpSwPcTo3	Implementation of a exponential function relating specific interfacial area to wetting phase saturation and capillary pressure
CAwnSurfaceExpSwPcTo3Params	Implementation of interfacial area surface params
CAwnSurfacePcMaxFct	Implementation of an interfacial area surface
CAwnSurfacePcMaxFctParams	Implementation of interfacial area surface params
CAwnSurfacePolynomial2ndOrder	Implementation of the polynomial of second order relating specific interfacial area to wetting phase saturation and capillary pressure as suggested by Joekar-Niasar(2008) [34]
CAwnSurfacePolynomial2ndOrderParams	Implementation of interfacial area surface params
CAwnSurfacePolynomialEdgeZero2ndOrder	Implementation of the polynomial of second order relating specific interfacial area to wetting phase saturation and capillary pressure
CAwnSurfacePolynomialEdgeZero2ndOrderParams	Implementation of interfacial area surface params
CBalanceEquationOptions	Traits class to set options used by the local residual when when evaluating the balance equations
CBaseFVGridGeometry	Base class for all finite volume grid geometries
CBaseGridGeometry	Base class for all finite volume grid geometries
CBaseStaggeredGeometryHelper	Base class for a staggered grid geometry helper
CBBoxTreeTests
CBenchmarkResult	Calculate errors for a FVCA5 benchmark problem
CBlockDiagAMGBiCGSTABSolver	A simple ilu0 block diagonal preconditioned BiCGSTABSolver
CBlockDiagAMGPreconditioner	A simple ilu0 block diagonal preconditioner
CBlockDiagILU0BiCGSTABSolver	A simple ilu0 block diagonal preconditioned BiCGSTABSolver
CBlockDiagILU0Preconditioner	A simple ilu0 block diagonal preconditioner
CBloodFlowProblem	Exact solution 1D-3D
CBloodFlowSpatialParams	Definition of the spatial parameters for the blood flow problem
CBoundaryConditions	Define a class containing boundary condition flags
CBoundaryFlag
CBoundarySegmentIndexFlag	Class for accessing boundary flags
►CBoundaryTypes	Class to specify the type of a boundary
CBoundaryInfo	Use bitfields to minimize the size
CBoundingBoxTree	An axis-aligned bounding box volume tree implementation
CBoundingBoxTreeIntersection	An intersection object resulting from the intersection of two bounding box tree primitives
CBoundingBoxTreePointSourceHelper	A helper class calculating a sub control volume to point source map This class uses the bounding box tree implementation to indentify in which sub control volume(s) a point source falls
CBoxDarcysLaw	Darcy's law for box schemes
CBoxDefaultGridFVCTraits	Flux variable caches traits
CBoxDefaultGridGeometryTraits	The default traits for the box finite volume grid geometry Defines the scv and scvf types and the mapper types
CBoxDefaultGridVolumeVariablesTraits
►CBoxDefaultScvfGeometryTraits	Default traits class to be used for the sub-control volume faces for the box scheme
►CScvfMLGTraits
CCornerStorage
ChasSingleGeometryType
►CBoxDefaultScvGeometryTraits	Default traits class to be used for the sub-control volumes for the box scheme
►CScvMLGTraits
CCornerStorage
ChasSingleGeometryType
CBoxDfmDefaultGridGeometryTraits	The default traits for the box finite volume grid geometry
►CBoxDfmDefaultScvfGeometryTraits	Default traits class to be used for the sub-control volume faces for the box discrete fracture scheme
►CScvfMLGTraits
CCornerStorage
ChasSingleGeometryType
►CBoxDfmDefaultScvGeometryTraits	Default traits class to be used for the sub-control volumes for the box discrete fracture scheme
►CScvMLGTraits
CCornerStorage
ChasSingleGeometryType
CBoxDfmFluxVariablesCache	We only store discretization-related quantities for the box method. However, we cannot reuse the cache of the standard box method as we have to take into account the scvs that lie on fracture facets
CBoxDfmFVElementGeometry	Base class for the finite volume geometry vector for box discrete fracture model
CBoxDfmFVElementGeometry< GG, false >	Specialization in case the FVElementGeometries are not stored
CBoxDfmFVElementGeometry< GG, true >	Specialization in case the FVElementGeometries are stored
CBoxDfmFVGridGeometry	Base class for the finite volume geometry vector for box schemes
CBoxDfmFVGridGeometry< Scalar, GV, false, Traits >	Base class for the finite volume geometry vector for box schemes This builds up the sub control volumes and sub control volume faces
CBoxDfmFVGridGeometry< Scalar, GV, true, Traits >	Base class for the finite volume geometry vector for box schemes that consider extra connectivity between grid vertices on marked codim one entities
CBoxDfmGeometryHelper	Create sub control volumes and sub control volume face geometries
CBoxDfmGeometryHelper< GridView, 2, ScvType, ScvfType >	A class to create sub control volume and sub control volume face geometries per element
CBoxDfmGeometryHelper< GridView, 3, ScvType, ScvfType >	A class to create sub control volume and sub control volume face geometries per element
CBoxDfmSubControlVolume	Sub control volume for the box discrete fracture scheme
CBoxDfmSubControlVolumeFace	Class for a sub control volume face in the box discrete fracture method, i.e a part of the boundary of a sub control volume we compute fluxes on
CBoxDfmVtkOutputModule	A VTK output module to simplify writing dumux simulation data to VTK format
CBoxElementBoundaryTypes	This class stores an array of BoundaryTypes objects
CBoxElementFluxVariablesCache	The flux variables caches for an element
CBoxElementFluxVariablesCache< GFVC, false >	The flux variables caches for an element with caching disabled
CBoxElementFluxVariablesCache< GFVC, true >	The flux variables caches for an element with caching enabled
CBoxElementSolution	The element solution vector
CBoxElementVolumeVariables	The local (stencil) volume variables class for box models
CBoxElementVolumeVariables< GVV, false >	The local (stencil) volume variables class for box models without caching
CBoxElementVolumeVariables< GVV, true >	The local (stencil) volume variables class for box models with caching
CBoxFacetCouplingDarcysLaw	Darcy's law for the box scheme scheme in the context of coupled models where coupling occurs across the facets of the bulk domain elements with a lower-dimensional domain living on these facets
CBoxFacetCouplingDefaultGridGeometryTraits	The default traits for the finite volume grid geometry of the box scheme with coupling occuring across the element facets. Defines the scv and scvf types and the mapper types
CBoxFacetCouplingElementBoundaryTypes	This class stores an array of BoundaryTypes objects on an element for the box scheme with coupling occuring across the element facets
CBoxFacetCouplingFVElementGeometry	Base class for the element-local finite volume geometry for box models in the context of models considering coupling of different domains across the bulk grid facets. This builds up the sub control volumes and sub control volume faces for an element
CBoxFacetCouplingFVElementGeometry< GG, false >	Specialization in case the geometries are not stored grid-wide
CBoxFacetCouplingFVElementGeometry< GG, true >	Specialization in case the FVElementGeometries are stored
CBoxFacetCouplingFVGridGeometry	Base class for the finite volume geometry vector for box schemes in the context of coupled models where the coupling occurs across the element facets. This builds up the sub control volumes and sub control volume faces
CBoxFacetCouplingFVGridGeometry< Scalar, GV, false, Traits >	Base class for the finite volume geometry vector for box schemes This builds up the sub control volumes and sub control volume faces
CBoxFacetCouplingFVGridGeometry< Scalar, GV, true, Traits >	Base class for the finite volume geometry vector for box schemes in the context of coupled models where the coupling occurs across the element facets. This builds up the sub control volumes and sub control volume faces
CBoxFacetCouplingLocalResidual	The element-wise residual for the box scheme
CBoxFacetCouplingSubControlVolumeFace	Class for a sub control volume face in the box method, i.e a part of the boundary of a sub control volume we compute fluxes on. This is a specialization for models considering coupling of different domains across the bulk grid facets
CBoxFacetCouplingUpwindScheme	The upwind scheme used for the advective fluxes. This is a modified scheme for models involving coupling with a lower-dimensional domain across the element facets
CBoxFluxVariablesCache	Flux variables cache class for the box scheme. For the box scheme, this class does not contain any physics-/process-dependent data. It solely stores disretization-/grid-related data
CBoxFVElementGeometry	Base class for the finite volume geometry vector for box models This builds up the sub control volumes and sub control volume faces for each element
CBoxFVElementGeometry< GG, false >	Specialization in case the FVElementGeometries are not stored
CBoxFVElementGeometry< GG, true >	Specialization in case the FVElementGeometries are stored
CBoxFVGridGeometry	Base class for the finite volume geometry vector for box schemes This builds up the sub control volumes and sub control volume faces
CBoxFVGridGeometry< Scalar, GV, false, Traits >	Base class for the finite volume geometry vector for box schemes This builds up the sub control volumes and sub control volume faces
CBoxFVGridGeometry< Scalar, GV, true, Traits >	Base class for the finite volume geometry vector for box schemes This builds up the sub control volumes and sub control volume faces
CBoxGeometryHelper	Create sub control volumes and sub control volume face geometries
CBoxGeometryHelper< GridView, 1, ScvType, ScvfType >	A class to create sub control volume and sub control volume face geometries per element
CBoxGeometryHelper< GridView, 2, ScvType, ScvfType >	A class to create sub control volume and sub control volume face geometries per element
CBoxGeometryHelper< GridView, 3, ScvType, ScvfType >	A class to create sub control volume and sub control volume face geometries per element
CBoxGridFluxVariablesCache	Flux variable caches on a gridview
CBoxGridFluxVariablesCache< P, FVC, false, Traits >	Flux variable caches on a gridview with grid caching disabled
CBoxGridFluxVariablesCache< P, FVC, true, Traits >	Flux variable caches on a gridview with grid caching enabled
CBoxGridVolumeVariables	Base class for the grid volume variables
CBoxGridVolumeVariables< P, VV, false, Traits >
CBoxGridVolumeVariables< P, VV, true, Traits >
CBoxLocalAssembler	An assembler for Jacobian and residual contribution per element (box methods)
CBoxLocalAssembler< TypeTag, Assembler, DiffMethod::analytic, false >	Box local assembler using analytic differentiation and explicit time discretization
CBoxLocalAssembler< TypeTag, Assembler, DiffMethod::analytic, true >	Box local assembler using analytic differentiation and implicit time discretization
CBoxLocalAssembler< TypeTag, Assembler, DiffMethod::numeric, false >	Box local assembler using numeric differentiation and explicit time discretization
CBoxLocalAssembler< TypeTag, Assembler, DiffMethod::numeric, true >	Box local assembler using numeric differentiation and implicit time discretization
CBoxLocalAssemblerBase	A base class for all local box assemblers
CBoxLocalResidual	The element-wise residual for the box scheme
CBoxMaterialInterfaceParams	Class that determines the material with the lowest capillary pressure (under fully water-saturated conditions) around the nodes of a grid
CBoxSubControlVolume	Sub control volume for the box scheme
CBoxSubControlVolumeFace	Class for a sub control volume face in the box method, i.e a part of the boundary of a sub control volume we compute fluxes on. We simply use the base class here
CBrooksCorey	Implementation of the Brooks-Corey capillary pressure <-> saturation relation. This class bundles the "raw" curves as static members and doesn't concern itself converting absolute to effective saturations and vice versa
CBrooksCoreyParams	Specification of the material parameters for the Brooks Corey constitutive relations
CBuckleyLeverettAnalytic
CCakeGridManager	Provides a grid manager with a method for creating creating vectors with polar Coordinates and one for creating a cartesian grid from these polar coordinates
CCapillaryDiffusion	Class for defining the diffusive capillary pressure term of a saturation equation
CCCDefaultScvGeometryTraits	Default traits class to be used for the sub-control volumes for the cell-centered finite volume scheme using TPFA
CCCElementBoundaryTypes	Boundary types gathered on an element
CCCElementSolution	The element solution vector
CCCFacetCouplingLocalResidual	Calculates the element-wise residual for cell-centered discretization schemes in models where coupling occurs across the element facets. We only overwrite the function for the computation of a flux across a single sub-control volume face, as we need to additionally check if a boundary face couples to a facet element
CCCFacetCouplingUpwindScheme	The upwind scheme used for the advective fluxes. This is a modified scheme for models involving coupling with a lower-dimensional domain across the element facets
CCCGridVolumeVariables	Base class for the grid volume variables
CCCGridVolumeVariables< Traits, false >	Specialization when the current volume variables are not stored globally
CCCGridVolumeVariables< Traits, true >	Specialization in case of storing the volume variables
CCCLocalAssembler	An assembler for Jacobian and residual contribution per element (cell-centered methods)
CCCLocalAssembler< TypeTag, Assembler, DiffMethod::analytic, false >	Cell-centered scheme local assembler using analytic (hand-coded) differentiation and explicit time discretization
CCCLocalAssembler< TypeTag, Assembler, DiffMethod::analytic, true >	Cell-centered scheme local assembler using analytic (hand-coded) differentiation and implicit time discretization
CCCLocalAssembler< TypeTag, Assembler, DiffMethod::numeric, false >	Cell-centered scheme local assembler using numeric differentiation and explicit time discretization
CCCLocalAssembler< TypeTag, Assembler, DiffMethod::numeric, true >	Cell-centered scheme local assembler using numeric differentiation and implicit time discretization
CCCLocalAssemblerBase	A base class for all local cell-centered assemblers
CCCLocalResidual	Calculates the element-wise residual for the cell-centered discretization schemes
CCCMpfaConnectivityMap	Forward declaration of method specific implementation of the assembly map
CCCMpfaConnectivityMap< GridGeometry, MpfaMethods::oMethod >	The o-method can use the simple (symmetric) assembly map
CCCMpfaDefaultGridFluxVariablesCacheTraits	Data handle physics traits
CCCMpfaDefaultGridVolumeVariablesTraits
►CCCMpfaDefaultScvfGeometryTraits	Default traits class to be used for the sub-control volume faces for the cell-centered finite volume scheme using MPFA
►CScvfMLGTraits
CCornerStorage
ChasSingleGeometryType
CCCMpfaDualGridIndexSet	Class for the index sets of the dual grid in mpfa schemes
CCCMpfaDualGridNodalIndexSet	Nodal index set for mpfa schemes, constructed around grid vertices
CCCMpfaElementFluxVariablesCache	The flux variables caches for an element
CCCMpfaElementFluxVariablesCache< GFVC, false >	The flux variables caches for an element with caching disabled
CCCMpfaElementFluxVariablesCache< GFVC, true >	The flux variables caches for an element with caching enabled
CCCMpfaElementVolumeVariables	The local (stencil) volume variables class for cell centered mpfa models
CCCMpfaElementVolumeVariables< GVV, false >	The local (stencil) volume variables class for cell centered tpfa models with caching
CCCMpfaElementVolumeVariables< GVV, true >	The local (stencil) volume variables class for cell centered mpfa models with caching
CCCMpfaFVElementGeometry	Stencil-local finite volume geometry (scvs and scvfs) for cell-centered mpfa models This builds up the sub control volumes and sub control volume faces for each element in the local scope we are restricting to, e.g. stencil or element
CCCMpfaFVElementGeometry< GG, false >	Stencil-local finite volume geometry (scvs and scvfs) for cell-centered TPFA models Specialization for grid caching disabled
CCCMpfaFVElementGeometry< GG, true >	Stencil-local finite volume geometry (scvs and scvfs) for cell-centered mpfa models Specialization for grid caching enabled
CCCMpfaFVGridGeometry	The finite volume geometry (scvs and scvfs) for cell-centered mpfa models on a grid view This builds up the sub control volumes and sub control volume faces
CCCMpfaFVGridGeometry< GV, Traits, false >	The finite volume geometry (scvs and scvfs) for cell-centered mpfa models on a grid view This builds up the sub control volumes and sub control volume faces
CCCMpfaFVGridGeometry< GV, Traits, true >	The finite volume geometry (scvs and scvfs) for cell-centered mpfa models on a grid view This builds up the sub control volumes and sub control volume faces
CCCMpfaFVGridGeometryTraits	Traits class to be used for the CCMpfaFVGridGeometry
CCCMpfaGridFluxVariablesCache	Flux variable caches on a gridview
CCCMpfaGridFluxVariablesCache< TheTraits, false >	Flux variable caches on a gridview with grid caching disabled
CCCMpfaGridFluxVariablesCache< TheTraits, true >	Flux variable caches on a gridview with grid caching enabled
CCCMpfaGridInteractionVolumeIndexSets	Class that holds all interaction volume index sets on a grid view
CCCMpfaGridVolumeVariables	Base class for the grid volume variables
CCCMpfaHelper	Helper class to get the required information on an interaction volume
CCCMpfaInteractionVolumeBase	Base class for the interaction volumes of mpfa methods. It defines the interface and actual implementations should derive from this class
CCCMpfaODefaultInteractionVolumeTraits	The default interaction volume traits class for the mpfa-o method. This uses dynamic types types for matrices/vectors in order to work on general grids. For interaction volumes known at compile time use the static interaction volume implementation
CCCMpfaODefaultStaticInteractionVolumeTraits	The default interaction volume traits class for the mpfa-o method with known size of the interaction volumes at compile time. It uses statically sized containers for the iv-local data structures and static matrices and vectors
CCCMpfaOFacetCouplingDefaultInteractionVolumeTraits	The default interaction volume traits class for the mpfa-o method in the context of facet coupling. This uses dynamic types types for matrices/vectors in order to work on general grids
►CCCMpfaOFacetCouplingInteractionVolume	Forward declaration of the facet coupling MPFA-O interaction volume
CInteriorBoundaryData	Define data structure to store which scvfs lie on interior boundaries
CCCMpfaOFacetCouplingInteractionVolumeLocalScv	Class for the interaction volume-local sub-control volume used in the mpfa-o scheme in the context of facet coupling
CCCMpfaOFacetCouplingInteractionVolumeLocalScvf	Class for the interaction volume-local sub-control volume face used in the mpfa-o scheme in the context of facet coupling
►CCCMpfaOInteractionVolume	Forward declaration of the o-method's interaction volume
CDirichletData
CCCMpfaOInteractionVolumeIndexSet	The interaction volume index set class for the mpfa-o scheme
CCCMpfaOInteractionVolumeLocalScv	Class for the interaction volume-local sub-control volume used in the mpfa-o scheme
CCCMpfaOInteractionVolumeLocalScvf	Class for the interaction volume-local sub-control volume face used in the mpfa-o scheme
CCCMpfaOScvGeometryHelper	Helper class providing functionality to compute the geometry of the interaction-volume local sub-control volumes of mpfa-o type
►CCCMpfaOStaticInteractionVolume	Forward declaration of the o-method's static interaction volume
CDirichletData	This does not work on surface grids
CCCMpfaScvGradients	Class roviding functionality for the reconstruction of the gradients in the sub-control volumes involved in mpfa schemes
CCCMpfaSubControlVolumeFace	Class for a sub control volume face in mpfa methods, i.e a part of the boundary of a control volume we compute fluxes on
CCCSimpleConnectivityMap	A simple version of the connectivity map for cellcentered schemes. This implementation works for schemes in which for a given cell I only those cells J have to be prepared in whose stencil the cell I appears. This means that for the flux calculations in the cells J (in order to compute the derivatives with respect to cell I), we do not need data on any additional cells J to compute these fluxes. The same holds for scvfs in the cells J, i.e. we need only those scvfs in the cells J in which the cell I is in the stencil
CCCSubControlVolume	Sub control volumes for cell-centered discretization schemes
CCCTpfaDarcysLaw	Darcy's law for cell-centered finite volume schemes with two-point flux approximation
CCCTpfaDarcysLaw< ScalarType, GridGeometry, false >	Specialization of the CCTpfaDarcysLaw grids where dim=dimWorld
CCCTpfaDarcysLaw< ScalarType, GridGeometry, true >	Specialization of the CCTpfaDarcysLaw grids where dim < dimWorld (network/surface grids)
CCCTpfaDefaultGridFVCTraits	Flux variable caches traits
CCCTpfaDefaultGridGeometryTraits	The default traits for the tpfa finite volume grid geometry Defines the scv and scvf types and the mapper types
CCCTpfaDefaultGridVolumeVariablesTraits
►CCCTpfaDefaultScvfGeometryTraits	Default traits class to be used for the sub-control volume faces for the cell-centered finite volume scheme using TPFA
►CScvfMLGTraits
CCornerStorage
CCCTpfaElementFluxVariablesCache	The flux variables caches for an element
CCCTpfaElementFluxVariablesCache< GFVC, false >	The flux variables caches for an element with caching disabled
CCCTpfaElementFluxVariablesCache< GFVC, true >	The flux variables caches for an element with caching enabled
CCCTpfaElementVolumeVariables	The local (stencil) volume variables class for cell centered tpfa models
CCCTpfaElementVolumeVariables< GVV, false >	The local (stencil) volume variables class for cell centered tpfa models with caching
CCCTpfaElementVolumeVariables< GVV, true >	The local (stencil) volume variables class for cell centered tpfa models with caching
CCCTpfaFacetCouplingDarcysLawCache	The cache corresponding to tpfa Darcy's Law with facet coupling
CCCTpfaFacetCouplingDarcysLawCache< AdvectionType, GridGeometry, false >	Specialization of the FacetCouplingTpfaDarcysLawCache for non-network grids
CCCTpfaFacetCouplingDarcysLawCache< AdvectionType, GridGeometry, true >	Specialization of the FacetCouplingTpfaDarcysLawCache for network grids
CCCTpfaFacetCouplingDarcysLawImpl	Forward declaration of the implementation
CCCTpfaFacetCouplingDarcysLawImpl< ScalarType, GridGeometry, false >	Specialization of the CCTpfaDarcysLaw grids where dim=dimWorld
CCCTpfaFacetCouplingDarcysLawImpl< ScalarType, GridGeometry, true >	Specialization of the CCTpfaDarcysLaw grids where dim<dimWorld
CCCTpfaForchheimersLaw	Forchheimer's law for cell-centered finite volume schemes with two-point flux approximation
CCCTpfaForchheimersLaw< ScalarType, GridGeometry, false >	Specialization of the CCTpfaForchheimersLaw grids where dim=dimWorld
CCCTpfaForchheimersLaw< ScalarType, GridGeometry, true >	Specialization of the CCTpfaForchheimersLaw grids where dim<dimWorld
CCCTpfaFVElementGeometry	Stencil-local finite volume geometry (scvs and scvfs) for cell-centered TPFA models This builds up the sub control volumes and sub control volume faces for each element in the local scope we are restricting to, e.g. stencil or element
CCCTpfaFVElementGeometry< GG, false >	Stencil-local finite volume geometry (scvs and scvfs) for cell-centered TPFA models Specialization for grid caching disabled
CCCTpfaFVElementGeometry< GG, true >	Stencil-local finite volume geometry (scvs and scvfs) for cell-centered TPFA models Specialization for grid caching enabled
CCCTpfaFVGridGeometry	The finite volume geometry (scvs and scvfs) for cell-centered TPFA models on a grid view This builds up the sub control volumes and sub control volume faces
CCCTpfaFVGridGeometry< GV, false, Traits >	The finite volume geometry (scvs and scvfs) for cell-centered TPFA models on a grid view This builds up the sub control volumes and sub control volume faces
CCCTpfaFVGridGeometry< GV, true, Traits >	The finite volume geometry (scvs and scvfs) for cell-centered TPFA models on a grid view This builds up the sub control volumes and sub control volume faces
CCCTpfaGridFluxVariablesCache	Flux variable caches on a gridview
CCCTpfaGridFluxVariablesCache< P, FVC, FVCF, false, TheTraits >	Flux variable caches on a gridview with grid caching disabled
CCCTpfaGridFluxVariablesCache< P, FVC, FVCF, true, TheTraits >	Flux variable caches on a gridview with grid caching enabled
CCCTpfaGridVolumeVariables	Base class for the grid volume variables
CCCTpfaSubControlVolumeFace	The sub control volume face
CCellCenterFVGridGeometry	Cell center specific auxiliary FvGridGeometry classes. Required for the Dumux multi-domain framework
CCellCenterGridVariablesView	Cell center specific auxiliary GridVariables classes. Required for the Dumux multi-domain framework
CCellData1P	Class including data of one grid cell
CCellData2P	Class including data of one grid cell
CCellData2P2C	Storage container for discretized data of the constitutive relations for one element
►CCellData2P2CAdaptive	Class including the data of a grid cell needed if an adaptive grid is used
CAdaptedValues	A container for all necessary variables to map an old solution to a new grid If the primary variables (pressure, total concentrations) are mapped to a new grid, the secondary variables can be calulated. For the mapping between sons and father, it is in addition necessary to know about how many sons live in each father ("count"). While only one phase pressure is PV, the method updateMaterialLaws() that recalculates the secondary variables needs both phase pressures (initiated via the capillary pressure of the last time step) to start the iteration to determine appropriate phase composition and pc. Hence, both phase pressures are mapped to the new solution
CCellData2P2CMultiPhysics	Storage container for discretized data for multiphysics models
CCellData2P< TypeTag, false >	Class including the variables and data of discretized data of the constitutive relations for one grid cell
CCellData2P< TypeTag, true >	Class including the variables and data of discretized data of the constitutive relations for one grid cell
►CCellData2PAdaptive	Class including the data of a grid cell needed if an adaptive grid is used
CAdaptedValues	Collection of variables that have to be mapped if the grid is adapted For an immiscible two-phase model, the following data has to be transferred to a new grid
CChannelNCTestProblem	Test problem for the one-phase (Navier-)Stokes model
CChannelTestProblem	Test problem for the one-phase (Navier-) Stokes problem in a channel
CCheckMaterialLaw	IMplicit Pressure Explicit Saturation (IMPES) scheme for the solution of the Buckley-Leverett problem
CCheckMaterialLaw< Scalar, EffToAbsLaw< LinearMaterial< Scalar > > >
CCheckMaterialLaw< Scalar, LinearMaterial< Scalar > >
CCheckOverlapSize	Check if the overlap size is valid for a given discretization method
CCheckOverlapSize< DiscretizationMethod::box >	Specialization for the box method which requires an overlap size of 0
CCheckOverlapSize< DiscretizationMethod::fem >
CCheckPointTimeLoop	A time loop with a check point mechanism
CCircleAveragePointSourceTraits	Point source traits for the circle average coupling mode
CClosedSystemTestProblem	Test problem for the one-phase (Navier-) Stokes model
CCodimOneGridAdapter	Adapter that allows retrieving information on a d-dimensional grid for entities of a (d-1)-dimensional grid. This lower-dimensional grid is assumed to be facet-conforming to the d-dimensional grid. This class can be used in the context of models where a sub-domain lives on the facets of a bulk grid
CColumnProblem	Non-isothermal injection problem where water is injected into a sand column with a NAPL contamination
CColumnSpatialParams	Definition of the spatial parameters for the column problem
CCombustionEnergyLocalResidual	This file contains the parts of the local residual to calculate the heat conservation in the thermal non-equilibrium model
CCombustionModelTraits	Custom model traits to deactivate diffusion for this test
CCombustionProblemOneComponent	Problem where water is injected from the left hand side into a porous media filled domain, which is supplied with energy from the right hand side to evaporate the water
CCombustionSpatialParams	Definition of the spatial parameters for the one component combustion problem
CComponentTraits
CComponentTraits< Components::TabulatedComponent< RawComponent, useVaporPressure > >	Component traits for tabulated component
CCompositionalFlash	Flash calculation routines for compositional sequential models
CCompositionalFluidState	Represents all relevant thermodynamic quantities of a multi-phase, multi-component fluid system assuming thermodynamic equilibrium
CCompositionalLocalResidual	Element-wise calculation of the local residual for problems using compositional fully implicit model
CCompositionalSolidState	Represents all relevant thermodynamic quantities of a compositional solid system
CCompositionFromFugacities	Calculates the chemical equilibrium from the component fugacities \( f^\kappa \) in the phase \( \alpha \)
CComputeFromReferencePhase	Computes all quantities of a generic fluid state if a reference phase has been specified
CConformingGridIntersectionMapper	Defines a standard intersection mapper for mapping of global DOFs assigned to faces. It only works for conforming grids, without hanging nodes
CConservationSpatialParams	The spatial parameters class for the test problem using the 1p cc model
CConstants	A central place for various physical constants occuring in some equations
CConvectivePart	Base class for defining a convective part of the saturation transport equation
CConvergenceWriterInterface
CCouplingManager
CCROperatorAssemblerTwoP	Extends CROperatorBase by a generic methods to assemble global stiffness matrix from local stiffness matrices
CCROperatorAssemblerTwoPAdaptive	Extends CROperatorBase by a generic methods to assemble global stiffness matrix from local stiffness matrices
CCubicSpline	A simple implementation of a natural cubic spline
CCubicSplineHermiteBasis	The cubic spline hermite basis
CDamBreakProblem	A simple dam break test for the shallow water equations
CDamBreakSpatialParams	The spatial parameters class for the dam break test
CDarcyDarcyBoundaryCouplingManager	Coupling manager for equal-dimension boundary coupling of darcy models
CDarcyDarcyBoundaryCouplingMapper	Default mapper for conforming equal dimension boundary coupling between two domains (box or cc)
CDarcysLawImplementation	Forward declaration of the method-specific implementation
CDarcysLawImplementation< TypeTag, DiscretizationMethod::box >	Specialization of Darcy's Law for the box method
CDarcysLawImplementation< TypeTag, DiscretizationMethod::ccmpfa >	Darcy's law for cell-centered finite volume schemes with multi-point flux approximation
CDarcysLawImplementation< TypeTag, DiscretizationMethod::cctpfa >	Darcy's law for cell-centered finite volume schemes with two-point flux approximation
CDarcySubProblem
CDefaultFEGridGeometryTraits	Default Traits class for the fem grid geometry
CDefaultIOFields	Adds output fields to a given output module
CDefaultMapperTraits
CDefaultPartialReassembler
CDefaultPointSourceTraits	Default point source traits
CDensityDrivenFlowProblem	Test problem for the one-phase model
CDiffusionCacheChooser
CDiffusionCacheChooser< TypeTag, true >
CDiffusionDataHandle	Data handle for quantities related to diffusion
CDiffusionDataHandle< MatVecTraits, PhysicsTraits, false >
CDiffusionProblem1P	Base class for all single phase diffusion problems
CDiffusionProblem2P	Base class for stationary solution of a two-phase diffusion/pressure equation
CDiffusivePart	Base class for defining the diffusive part of the saturation transport equation
CDiffusivityConstantTortuosity	Relation for the saturation-dependent effective diffusion coefficient
CDiffusivityMillingtonQuirk	Relation for the saturation-dependent effective diffusion coefficient
CDimensionlessNumbers	Collection of functions which calculate dimensionless numbers. Each number has it's own function. All the parameters for the calculation have to be handed over. Rendering this collection generic in the sense that it can be used by any model
CDisableStaticAssert	Helper struct to deactivate static assertions in component's base classes
CDissolutionProblem	Problem where water is injected in a for flushing precipitated salt clogging a gas reservoir
CDissolutionSpatialParams	Spatial parameters for the dissolution problem where water is injected in a for flushing precipitated salt clogging a gas reservoir
CDoneaTestProblem	Test problem for the staggered grid (Donea 2003, [20])
CDumuxMessage	DuMux start and end message
CEffectiveStressLaw	This computes the stress tensor and surface forces resulting from poro-mechanical deformation
CEffectiveStressLaw< StressType, GridGeometry, DiscretizationMethod::box >	Effective stress law for box scheme
CEffToAbsLaw	This material law takes a material law defined for effective saturations and converts it to a material law defined on absolute saturations
CEffToAbsLawIA	This material law takes a material law (interfacial area surface) defined for effective saturations and converts it to a material (interfacial area surface) law defined on absolute saturations
CEffToAbsLawIAParams	A default implementation of the parameters for the adapter class to convert material laws – in this case the interfacial area surfaces – from effective to absolute saturations
CEffToAbsLawParams	A default implementation of the parameters for the adapter class to convert material laws from effective to absolute saturations
CElasticIndices	The indices for the linear elasticity model
CElasticLocalResidual	Element-wise calculation of the local residual for problems using the elastic model considering linear elasticity
CElasticModelTraits	Specifies a number properties of the elastic model
CElasticProblem	Problem definition for the deformation of an elastic body
CElasticSpatialParams	Definition of the spatial parameters for the linear elasticity problem
CElasticVolumeVariables	Contains the quantities which are constant within a finite volume in the elastic model
CElasticVolumeVariablesTraits	Traits class for the volume variables of the elastic model
CElectroChemistry	This class calculates source terms and current densities for fuel cells with the electrochemical models suggested by Ochs (2008) [50] or Acosta et al. (2006) [2]
CElectroChemistryNI	Class calculating source terms and current densities for fuel cells with the electrochemical models suggested by Ochs (2008) [50] or Acosta (2006) [2] for the non-isothermal case
CEmbeddedCouplingManager1d3d	Manages the coupling between bulk elements and lower dimensional elements Point sources on each integration point are computed by an AABB tree
CEmbeddedCouplingManager1d3d< MDTraits, EmbeddedCouplingMode::average >	Manages the coupling between bulk elements and lower dimensional elements Point sources on each integration point are computed by an AABB tree
CEmbeddedCouplingManager1d3d< MDTraits, EmbeddedCouplingMode::cylindersources >	Manages the coupling between bulk elements and lower dimensional elements Point sources on each integration point are computed by an AABB tree
CEmbeddedCouplingManager1d3d< MDTraits, EmbeddedCouplingMode::kernel >	Manages the coupling between bulk elements and lower dimensional elements Point sources on each integration point are computed by an AABB tree
CEmbeddedCouplingManager1d3d< MDTraits, EmbeddedCouplingMode::line >	Manages the coupling between bulk elements and lower dimensional elements Point sources on each integration point are computed by an AABB tree
CEmbeddedCouplingManager2d3d	Coupling manager for embedded fractures
CEmbeddedCouplingManagerBase	Manages the coupling between bulk elements and lower dimensional elements Point sources on each integration point are computed by an AABB tree
CEmptyDataHandle	Empty data handle class
CEmptyElementSolution
CEnergyCacheChooser
CEnergyCacheChooser< TypeTag, true >
CEnergyIndices	Indices for the non-isothermal two-phase two-component model
CEnergyIOFields	Adds I/O fields specific to non-isothermal models
CEnergyIOFields< void >	Adds I/O fields specific to non-isothermal models
CEnergyLocalResidualImplementation
CEnergyLocalResidualImplementation< TypeTag, false >	Element-wise calculation of the energy residual for non-isothermal problems
CEnergyLocalResidualImplementation< TypeTag, true >	TODO docme!
CEnergyLocalResidualNonEquilibrium	This file contains the parts of the local residual to calculate the heat conservation in the thermal non-equilibrium model
CEnergyLocalResidualNonEquilibrium< TypeTag, 1 >
CEnergyLocalResidualNonEquilibrium< TypeTag, 2 >
CEnergyVolumeVariablesImplementation
CEnergyVolumeVariablesImplementation< IsothermalTraits, Impl, false >	The isothermal base class
CEnergyVolumeVariablesImplementation< IsothermalTraits, Impl, true >	The non-isothermal implicit volume variables base class
CEnrichedVertexDofMapper	A vertex mapper that allows for enrichment of nodes. Indication on where to enrich the nodes is done on the basis of a grid of codimension one living on the facets of the bulk grid
CEnrichmentIndicator	An indicator class used to mark vertices for enrichment. This implementation marks all vertices of a given grid of codimension one for enrichment, except those that are connected to inmersed boundaries
►CEntityExchanger	Helper class for adding up matrix entries on border
CMatEntry	Local matrix blocks associated with the global id set
CMatEntryExchange	A DataHandle class to exchange matrix entries
CMatPatternExchange	A DataHandle class to exchange matrix sparsity patterns
CEntityMap	A map from indices to entities using grid entity seeds
CEvalCflFlux	Base class for implementations of different kinds of fluxes to evaluate a CFL-Condition
CEvalCflFluxCoats	Cfl-flux-function to evaluate a Cfl-Condition after Coats 2003
CEvalCflFluxDefault	Default implementation of cfl-fluxes to evaluate a CFL-Condition
CEvaporationAtmosphereProblem	Problem showcasing the capabilities of the kinetic model
CEvaporationAtmosphereSpatialParams	Definition of the spatial parameters for the evaporation atmosphere Problem (using a "poor man's coupling")
CExplicitDiagonalSolver	Solver for simple block-diagonal matrices (e.g. from explicit time stepping schemes)
CExtendedRichardsPrimaryVariableSwitch	The primary variable switch controlling the phase presence state variable
CFaceFVGridGeometry	Face specific auxiliary FvGridGeometry classes. Required for the Dumux multi-domain framework
CFaceGridVariablesView	Face specific auxiliary GridVariables classes. Required for the Dumux multi-domain framework
CFacetCouplingEmbeddings	Contains the embeddings between grids with codimension one among the grid hierarchy. All these embedments are given in insertion indices as they are read directly from the grid. Therefore, this class furthermore allows access to the insertion indices of entities. Additionally, it gives access to the grid views of the different grids on the hierarchy
CFacetCouplingGmshReader	Reads gmsh files where (n-1)-dimensional grids are defined on the faces or edges of n-dimensional grids
CFacetCouplingGridDataWrapper	Grid data object to store element and boundary segment markers for all grids of the hierarchy
CFacetCouplingGridManager	Creates the grids in the context of hybrid-dimensional coupled models, where the (n-1)-dimensional domains live on the element facets of the n-dimensional domains
CFacetCouplingManager	Implementation for the coupling manager between two domains of dimension d and (d-1) for models considering coupling across the bulk domain element facets. The implementations are specificto the discretization method used in the bulk domain, which is extracted automatically from the grid geometry corresponding to the provided bulk domain id. Implementations for the different methods have to be provided and included at the end of this file
CFacetCouplingManager< MDTraits, CouplingMapper, bulkDomainId, lowDimDomainId, DiscretizationMethod::box >	Manages the coupling between bulk elements and lower dimensional elements where the coupling occurs across the facets of the bulk grid. This implementation is to be used in conjunction with models using the box scheme in the bulk domain
CFacetCouplingManager< MDTraits, CouplingMapper, bulkDomainId, lowDimDomainId, DiscretizationMethod::ccmpfa >	Manages the coupling between bulk elements and lower dimensional elements where the coupling occurs across the facets of the bulk grid. This implementation is to be used in conjunction with models using the cell-centered mpfa scheme
CFacetCouplingManager< MDTraits, CouplingMapper, bulkDomainId, lowDimDomainId, DiscretizationMethod::cctpfa >	Manages the coupling between bulk elements and lower dimensional elements where the coupling occurs across the facets of the bulk grid. This implementation is to be used in conjunction with models using the cell-centered tpfa scheme
CFacetCouplingMapper	Implementation for the coupling mapper that sets up and stores the coupling maps between two domains of dimension d and (d-1). The implementations are specific to the discretization method used in the bulk domain, which is extracted automatically from the bulk grid geometry. Implementations for the different methods have to be provided and included at the end of this file
CFacetCouplingMapper< BulkFVG, LowDimFVG, bulkId, lowDimId, DiscretizationMethod::box >	Base class for the coupling mapper that sets up and stores the coupling maps between two domains of dimension d and (d-1). This specialization is for the bulk domain using the box scheme
CFacetCouplingMapper< BulkFVG, LowDimFVG, bulkId, lowDimId, DiscretizationMethod::ccmpfa >	Base class for the coupling mapper that sets up and stores the coupling maps between two domains of dimension d and (d-1). This specialization is for the bulk domain using the cell-centered scheme with multi-point flux approximation
CFacetCouplingMapper< BulkFVG, LowDimFVG, bulkId, lowDimId, DiscretizationMethod::cctpfa >	Base class for the coupling mapper that sets up and stores the coupling maps between two domains of dimension d and (d-1). This specialization is for the bulk domain using the cell-centered scheme with two-point flux approximation
CFacetCouplingMapperBase	Base class for the coupling mapper that sets up and stores the coupling maps between two domains of dimension d and (d-1)
CFacetCouplingThreeDomainManager	Class that handles the coupling between three sub-domains in models where the coupling between the two occurs across the facets of the d- and (d-1)- dimensional domains
CFacetCouplingThreeDomainMapper	Specialization of the mapper class for the case of three domains with the grid dimensions d, (d-1) & (d-2)
CFEElementGeometry	Grid geometry local view, which is a wrapper around a finite element basis local view
CFEGridGeometry	The grid geometry class for models using finite element schemes. This is basically a wrapper around a function space basis
CFicksLawImplementation	Forward declaration of the method-specific implemetation
CFicksLawImplementation< TypeTag, DiscretizationMethod::box, referenceSystem >	Specialization of Fick's Law for the box method
CFicksLawImplementation< TypeTag, DiscretizationMethod::ccmpfa, referenceSystem >	Fick's law for cell-centered finite volume schemes with multi-point flux approximation
CFicksLawImplementation< TypeTag, DiscretizationMethod::cctpfa, referenceSystem >	Fick's law for cell-centered finite volume schemes with two-point flux approximation
CFicksLawImplementation< TypeTag, DiscretizationMethod::staggered, referenceSystem >	Specialization of Fick's Law for the staggered free flow method
CFixedLengthSpline_	The common code for all 3rd order polynomial splines with more than two sampling points
CFlatPlateNCTestProblem	Test problem for the one-phase model
CFluidSolidInterfacialAreaShiWang	Description of a interfacial area between solid and fluid phase
CFluidStateAdapter	Adapter class for fluid states with different indices
CFluxData1P	Class storing data assigned to a cell-cell interfaces, so-called flux-data
CFluxData2P	Class storing data assigned to a cell-cell interfaces, so-called flux-data
CFluxData2P2C	Class including the variables and data of discretized data of the constitutive relations
CFluxOverSurface	Class used to calculate fluxes over surfaces. This only works for the staggered grid discretization
CFluxStencil	The flux stencil specialized for different discretization schemes
CFluxStencil< FVElementGeometry, DiscretizationMethod::ccmpfa >
CFluxStencil< FVElementGeometry, DiscretizationMethod::cctpfa >
CFluxVariablesBase	Base class for the flux variables living on a sub control volume face
CForchheimersLawImplementation	Forward declare
CForchheimersLawImplementation< TypeTag, DiscretizationMethod::cctpfa >	Forchheimer's law for cell-centered finite volume schemes with two-point flux approximation
CFouriersLawImplementation	Forward declaration of the method-specific implementation
CFouriersLawImplementation< TypeTag, DiscretizationMethod::box >	Specialization of Fourier's Law for the box method
CFouriersLawImplementation< TypeTag, DiscretizationMethod::ccmpfa >	Fourier's law for cell-centered finite volume schemes with two-point flux approximation
CFouriersLawImplementation< TypeTag, DiscretizationMethod::cctpfa >	Fourier's law for cell-centered finite volume schemes with two-point flux approximation
CFouriersLawImplementation< TypeTag, DiscretizationMethod::staggered >	Specialization of Fourier's Law for the staggered free flow method
CFouriersLawNonEquilibriumImplementation
CFouriersLawNonEquilibriumImplementation< TypeTag, DiscretizationMethod::box >	Specialization of Fourier's Law for the box method for thermal nonequilibrium models
CFouriersLawNonEquilibriumImplementation< TypeTag, DiscretizationMethod::cctpfa >	Fourier's law for cell-centered finite volume schemes with two-point flux approximation
CFractureProblem	Exact solution 1D-3D
CFractureSpatialParams	The spatial parameters for the LensProblem which uses the two-phase fully implicit model
CFreeFlowEnergyLocalResidualImplementation
CFreeFlowEnergyLocalResidualImplementation< GridGeometry, FluxVariables, discMethod, false, isCompositional >	Specialization for isothermal models, does nothing
CFreeFlowEnergyLocalResidualImplementation< GridGeometry, FluxVariables, DiscretizationMethod::staggered, true, false >	Specialization for staggered one-phase, non-isothermal models
CFreeFlowEnergyLocalResidualImplementation< GridGeometry, FluxVariables, DiscretizationMethod::staggered, true, true >	Specialization for staggered compositional, non-isothermal models
CFreeflowNCFluxVariablesImpl
CFreeflowNCFluxVariablesImpl< TypeTag, DiscretizationMethod::staggered >	The flux variables class for the multi-component free-flow model using the staggered grid discretization
CFreeflowNCIOFields	Adds I/O fields specific to the FreeflowNC model
CFreeflowNCResidualImpl
CFreeflowNCResidualImpl< TypeTag, DiscretizationMethod::staggered >	Element-wise calculation of the multi-component free-flow residual for models using the staggered discretization
CFreeflowNCVolumeVariables	Volume variables for the single-phase, multi-component free-flow model
CFreeflowNIModelTraits	Specifies a number properties of non-isothermal free-flow flow models based on the specifics of a given isothermal model
CFreeflowNonIsothermalIndices	Indices for the non-isothermal Navier-Stokes model
CFreeflowNonIsothermalIOFields	Adds I/O fields specific to non-isothermal free-flow models
►CFreeFlowStaggeredDefaultScvfGeometryTraits	Default traits class to be used for the sub-control volume faces for the free-flow staggered finite volume scheme
►CScvfMLGTraits
CCornerStorage
CFreeFlowStaggeredGeometryHelper	Helper class constructing the dual grid finite volume geometries for the free flow staggered discretization method
CFreeFlowStaggeredSubControlVolumeFace	Class for a sub control volume face in the staggered method, i.e a part of the boundary of a sub control volume we compute fluxes on. This is a specialization for free flow models
CFreeFlowVolumeVariablesImplementation
CFreeFlowVolumeVariablesImplementation< Traits, Impl, false >	Volume variables for isothermal free-flow models
CFreeFlowVolumeVariablesImplementation< Traits, Impl, true >	Volume variables for the non-isothermal free-flow models
CFrictionLaw	Implementation of the abstract base class for friction laws
CFrictionLawManning	Implementation of the friction law after Manning
CFrictionLawNikuradse	Implementation of the friction law after Nikuradse
CFuelCellProblem	Definition of a problem for water management in PEM fuel cells
CFuelCellSpatialParams	Definition of the spatial parameters for the FuelCell problem which uses the isothermal 2p2c box model
CFV2dPressure2P2CAdaptive	The finite volume model for the solution of the compositional pressure equation
CFV2dTransport2P2CAdaptive	Compositional Transport step in a Finite Volume discretization for a adaptive 2D-grid
CFV3dPressure2P2CAdaptive	The finite volume model for the solution of the compositional pressure equation
CFV3dTransport2P2CAdaptive	Compositional transport step in a finite volume discretization
CFVAssembler	A linear system assembler (residual and Jacobian) for finite volume schemes (box, tpfa, mpfa, ...)
CFVGridVariables	The grid variable class for finite volume schemes storing variables on scv and scvf (volume and flux variables)
CFVLocalAssemblerBase	A base class for all local assemblers
CFVLocalResidual	The element-wise residual for finite volume schemes
CFvMpfaL2dPressure2p	Finite volume MPFA L-method discretization of a two-phase flow pressure equation of the sequential IMPES model
CFvMpfaL2dPressure2pAdaptive	Grid adaptive finite volume MPFA L-method discretization of a two-phase flow pressure equation of the sequential IMPES model
CFvMpfaL2dPressureVelocity2p	Class for the calculation of velocities from the pressure solution of an IMPES scheme using a MPFA L-method
CFvMpfaL2dPressureVelocity2pAdaptive	Class for the calculation of velocities from the pressure solution of an IMPES scheme using a grid adaptive MPFA L-method
CFvMpfaL2dTransmissibilityCalculator	Provides methods for transmissibility calculation in 2-d
CFvMpfaL2dVelocity2p	Class for calculating 2-d velocities from cell-wise constant pressure values
CFvMpfaL2dVelocity2pAdaptive	Class for calculating 2-d velocities from cell-wise constant pressure values
CFvMpfaL3d2P2CInteractionVolumeContainerAdaptive	Interaction volume container for compositional adaptive 3-d (using MPFA L-method) Model
CFvMpfaL3dInteractionVolume	Class including the information of a 3d interaction volume of a MPFA L-method that does not change with time
CFvMpfaL3dInteractionVolumeAdaptive	Class including the information of a 3d interaction volume of an adaptive MPFA L-method that does not change with time
CFvMpfaL3dInteractionVolumeContainer	Interactionvolume container for 3-d MPFA L-method
CFvMpfaL3dInteractionVolumeContainerAdaptive	Interactionvolume container for 3-d MPFA L-method on an h-adaptive grid
CFvMpfaL3dPressure2p	3-d finite volume MPFA L-method discretization of a two-phase flow pressure equation of the sequential IMPES model
CFvMpfaL3dPressure2pAdaptive	3-d finite volume MPFA L-method discretization of a two-phase flow pressure equation of the sequential IMPES model on h-adaptive grids
CFvMpfaL3dPressureVelocity2p	Class for the calculation of 3d velocities from the pressure solution of an IMPES scheme using a MPFA L-method
CFvMpfaL3dPressureVelocity2pAdaptive	Class for the calculation of 3d velocities from the pressure solution of an IMPES scheme using a grid adaptive MPFA L-method
CFvMpfaL3dTransmissibilityCalculator	Provides methods for transmissibility calculation in 3-d
CFvMpfaL3dVelocity2p	Class for calculating 3-d velocities from cell-wise constant pressure values
CFvMpfaL3dVelocity2pAdaptive	Class for calculating 3-d velocities from cell-wise constant pressure values
CFVMPFALInteractionVolume	Class including the information of an interaction volume of a MPFA L-method that does not change with time
CFvMpfaO2dPressure2p	Finite volume MPFA O-method discretization of a two-phase flow pressure equation of the sequential IMPES model
CFvMpfaO2dPressureVelocity2p	Class for the calculation of velocities from the pressure solution of an IMPES scheme using a MPFA O-method
CFvMpfaO2dVelocity2P	Class for calculating velocities from cell-wise constant pressure values
CFVMPFAOInteractionVolume	Class including the information of an interaction volume of a MPFA O-method that does not change with time
CFvMpfaVelocityInTransport	Implementation of a interface velocity class for MPFA models
CFVNonEquilibriumSpatialParams	Definition of the spatial parameters for non-equilibrium
CFVPressure	The finite volume base class for the solution of a pressure equation
CFVPressure1P	Sequential OneP Model solving the equations for pressure and velocity separately
CFVPressure2P	Finite Volume discretization of a two-phase flow pressure equation of the sequential IMPES model
CFVPressure2P2C	The finite volume model for the solution of the compositional pressure equation
CFVPressure2P2CMultiPhysics	The finite volume model for the solution of the compositional pressure equation
CFVPressure2PAdaptive	Finite volume discretization of a two-phase flow pressure equation of the sequential IMPES model
CFVPressureCompositional	The finite volume model for the solution of the compositional pressure equation
CFVPressureVelocity1P	Single Phase Finite Volume Model
CFVPressureVelocity2P	Two-phase finite volume model
►CFVProblem	Base class for all finite-volume problems
CTraits	Export traits of this problem
CFVSaturation2P	The finite volume discretization of a saturation transport equation
CFVSpatialParams	The base class for spatial parameters of multi-phase problems using a fully implicit discretization method
CFVSpatialParamsElastic	The base class for spatial parameters of linear elastic geomechanical problems
CFVSpatialParamsOneP	The base class for spatial parameters of one-phase problems using a fully implicit discretization method
CFVSpatialParamsPoroElastic	The base class for spatial parameters of poro-elastic geomechanical problems
CFVTransport	The finite volume discretization of a transport equation
►CFVTransport2P2C	Compositional transport step in a Finite Volume discretization
CLocalTimesteppingData
CFVTransport2P2CMultiPhysics	Compositional transport step in a finite volume discretization
CFVVelocity	Base class for finite volume velocity reconstruction
CFVVelocity1P	Single phase finite volume velocity reconstruction
CFVVelocity2P	Determines the velocity from a finite volume solution of the pressure equation of a sequential model (IMPES)
CFVVelocity2PAdaptive	Determines the velocity from a finite volume solution of the pressure equation of a sequential model (IMPES)
CFVVelocityDefault	Default implementation of a velocity class
CGeomechanicsFVProblem	Base class for all geomechanical problems
CGeomechanicsVelocityOutput	Velocity output for geomechanical models. This class could be used to compute the temporal derivative of the displacement. Currently this is not implemented and we simply define this here in order to be able to reuse the VtkOutputModule which expects a VelocityOutput class
CGeometryIntersection	A class for geometry collision detection and intersection calculation The class can be specialized for combinations of dimworld, dim1, dim2, where dimworld is the world dimension embedding a grid of dim1 and a grid of dim2
CGeometryIntersection< Geometry1, Geometry2, Policy, 2, 1, 1 >	A class for segment–segment intersection in 2d space
CGeometryIntersection< Geometry1, Geometry2, Policy, 2, 1, 2 >	A class for segment–polygon intersection in 2d space
CGeometryIntersection< Geometry1, Geometry2, Policy, 2, 2, 1 >	A class for polygon–segment intersection in 2d space
CGeometryIntersection< Geometry1, Geometry2, Policy, 2, 2, 2 >	A class for polygon–polygon intersection in 2d space
CGeometryIntersection< Geometry1, Geometry2, Policy, 3, 1, 2 >	A class for segment–polygon intersection in 3d space
CGeometryIntersection< Geometry1, Geometry2, Policy, 3, 1, 3 >	A class for segment–polyhedron intersection in 3d space
CGeometryIntersection< Geometry1, Geometry2, Policy, 3, 2, 1 >	A class for polygon–segment intersection in 3d space
CGeometryIntersection< Geometry1, Geometry2, Policy, 3, 2, 3 >	A class for polygon–polyhedron intersection in 3d space
CGeometryIntersection< Geometry1, Geometry2, Policy, 3, 3, 1 >	A class for polyhedron–segment intersection in 3d space
CGeometryIntersection< Geometry1, Geometry2, Policy, 3, 3, 2 >	A class for polyhedron–polygon intersection in 3d space
CGmshBoundaryFlagTest
CGmshGridDataHandle	A data handle for commucating grid data for gmsh grids
CGnuplotInterface	Interface for passing data sets to a file and plotting them, if gnuplot is installed
CGravityPart	Class for defining the gravity term of a two-phase flow saturation equation
CGridAdapt	Standard Module for h-adaptive simulations
CGridAdapt< TypeTag, false >	Class for NON-adaptive simulations
CGridAdaptInitializationIndicator	Class defining an initialization indicator for grid adaption. Refines at sources and boundaries. Use before computing on the grid
CGridAdaptInitializationIndicatorDefault	Class defining a start indicator for grid adaption
CGridAdaptionIndicator2P	Class defining a standard, saturation dependent indicator for grid adaption
CGridAdaptionIndicator2PLocal	Class defining a standard, saturation dependent indicator for grid adaption
CGridData	Class for grid data attached to dgf or gmsh grid files
CGridDataTransfer	Interface to be used by classes transferring grid data on adpative grids
CGridGeometryView	Base class for cell center of face specific auxiliary FvGridGeometry classes. Provides a common interface and a pointer to the actual gridGeometry
CGridManager	The grid manager (this is the class used by the user) for all supported grid managers that constructs a grid from information in the input file and handles the data
CGridManager< Dune::OneDGrid >	Provides a grid manager for OneDGrids from information in the input file
CGridManager< Dune::YaspGrid< dim, Coordinates > >	Provides a grid manager for YaspGrids from information in the input file
CGridManager< Dune::YaspGrid< dim, Dune::TensorProductCoordinates< ctype, dim > > >	Provides a grid manager for YaspGrids with different zones and grading
CGridManagerBase	The grid manager base interface (public) and methods common to most grid manager specializations (protected)
CGridManagerTests
CGridTypes	Indices denoting the different grid types
CGridViewGeometricEntitySet	An interface for a set of geometric entities
CGSBiCGSTABBackend	Sequential GS-preconditioned BiCGSTAB solver
CGSCGBackend	Sequential GS-preconditioned CG solver
CGstatRandomField	Creating random fields using gstat
CHairSplittingFluidState	This fluid state ensures that only the allowed quantities are accessed
ChasVertexColor	Helper struct to determine whether the an engine class has vertex colors
CHeatConductionDataHandle	Data handle for quantities related to heat conduction
CHeatConductionDataHandle< MatVecTraits, PhysicsTraits, false >
CHeatPipeLaw	Implementation of the capillary pressure <-> saturation relation for the heatpipe problem
CHeatPipeLawParams	Reference implementation of a params for the heat pipe's material law
CHeterogeneousProblem	Definition of a problem, where CO2 is injected in a reservoir
CHeterogeneousSpatialParams	Definition of the spatial parameters for the heterogeneous problem which uses the non-isothermal or isothermal CO2 fully implicit model
CHookesLaw	This computes the stress tensor and surface forces resulting from mechanical deformation
CHookesLaw< ScalarType, GridGeometry, DiscretizationMethod::box >	Hooke's law for box scheme
CIdealGas	Relations valid for an ideal gas
CIdPointSource	A point source class with an identifier to attach data
CILU0BiCGSTABBackend	Sequential ILU(0)-preconditioned BiCGSTAB solver
CILU0CGBackend	Sequential ILU(0)-preconditioned CG solver
CILU0RestartedGMResBackend	Sequential ILU0-preconditioned GMRes solver
CILUnBiCGSTABBackend	Sequential ILU(n)-preconditioned BiCSTAB solver
CILUnCGBackend	Sequential ILU(n)-preconditioned CG solver
CILUnRestartedGMResBackend	Sequential ILU(n)-preconditioned GMRes solver
CImmiscibleFlash	Determines the pressures and saturations of all fluid phases given the total mass of all components
CImmiscibleFluidState	Represents all relevant thermodynamic quantities of a multi-phase fluid system assuming immiscibility and thermodynamic equilibrium
CImmiscibleLocalResidual	Element-wise calculation of the residual for problems using the n-phase immiscible fully implicit models
CIMPESProblem2P	Base class for all 2-phase problems which use an IMPES algorithm
CIMPESTestProblem	Test problem for the sequential 2p model
CIMPET	IMplicit Pressure Explicit Transport (IMPET) scheme for the solution of weakly coupled diffusion-transport formulations
CIMPETProblem	Base class for problems using a sequential implicit-explicit strategy
CIMPETProblem2P2C	Base class for all compositional 2-phase problems which use an impet algorithm
CIndexHelper	Helper struct to choose the correct index for phases and components. This is need if the porous-medium-flow model features more fluid phases than the free-flow model
CIndexHelper< stokesIdx, darcyIdx, FFFS, false >	Helper struct to choose the correct index for phases and components. This is need if the porous-medium-flow model features more fluid phases than the free-flow model. Specialization for the case that no adapter is used
CIndexHelper< stokesIdx, darcyIdx, FFFS, true >	Helper struct to choose the correct index for phases and components. This is need if the porous-medium-flow model features more fluid phases than the free-flow model. Specialization for the case that a adapter is used
CIndexTraits	Struture to define the index types used for grid and local indices
CInertSolidState	Represents all relevant thermodynamic quantities of a inert solid system
CInfiltrationThreePProblem	Isothermal NAPL infiltration problem: LNAPL contaminates the unsaturated and the saturated groundwater zone
CInfiltrationThreePSpatialParams	Definition of the spatial parameters for the infiltration problem
CInfiltrationThreePThreeCProblem	Isothermal NAPL infiltration problem: LNAPL contaminates the unsaturated and the saturated groundwater zone
CInfiltrationThreePThreeCSpatialParams	Definition of the spatial parameters for the infiltration problem
CInjectionProblem	Non-isothermal 2D problem where steam is injected on the lower left side of the domain
CInjectionProblem2PNI	Forward declaration of the problem class
CInjectionProblemSpatialParams	Definition of the spatial parameters for various steam injection problems
CInjectionSpatialParams	Definition of the spatial parameters for the injection problem which uses the isothermal two-phase two-component fully implicit model
CIntegrationPointSource	An integration point source class with an identifier to attach data and a quadrature weight and integration element
CIntegrationPointSourceHelper	A helper class calculating a DOF-index to point source map
CInteractionVolumeAssemblerBase	Defines the general interface of the local assembler classes for the assembly of the interaction volume-local transmissibility matrix. Specializations have to be provided for the available interaction volume implementations. these should derive from this base class
CInteractionVolumeAssemblerHelper	A class that contains helper functions as well as functionality which is common to different mpfa schemes and which solely operate on the interaction volume
CInteractionVolumeDataHandle	Class for the interaction volume data handle
CInteractionVolumeDataStorage	Structure to store interaction volumes and data handles
CInteractionVolumeLocalFaceData	General implementation of a data structure holding interaction volume-local information for a grid sub-control volume face embedded in it
CIntersectionMapper	Defines an intersection mapper for mapping of global DOFs assigned to faces which also works for adaptive grids
CIntRange	This class generates a IntRange [a,b) which can be used in a for loop, e.g. for(auto i : IntRange(3) { ... i = 0, 1, 2 } or for(auto i : IntRange(5, 8) { ... i = 5, 6, 7 } see: https://en.wikipedia.org/wiki/Generator_(computer_programming)
CisBCRSMatrix	Helper type to determine whether a given type is a Dune::BCRSMatrix
CisBCRSMatrix< Dune::BCRSMatrix< T > >	Helper type to determine whether a given type is a Dune::BCRSMatrix
CIsFicksLaw	This structs indicates that Fick's law is not used for diffusion
CIsFicksLaw< FicksLawImplementation< T, discMethod, referenceSystem > >	This structs indicates that Fick's law is used for diffusion
CisMultiTypeBlockVector	Helper type to determine whether a given type is a Dune::MultiTypeBlockVector
CisMultiTypeBlockVector< Dune::MultiTypeBlockVector< T... > >	Helper type to determine whether a given type is a Dune::MultiTypeBlockVector
CisMultiTypeBlockVector< MultiTypeBlockVectorProxy< T... > >
CIsothermalImmiscibleFluidState	Represents all relevant thermodynamic quantities of a multi-phase fluid system assuming immiscibility and thermodynamic equilibrium
CIsSameFluidSystem	This structs helps to check if the two sub models use the same fluidsystem. Specialization for the case of using an adapter only for the free-flow model
CIsSameFluidSystem< FS, FS >	This structs helps to check if the two sub models use the same fluidsystem
CIterativePreconditionedSolverImpl	A general solver backend allowing arbitrary preconditioners and solvers
CIvDataHandlePhysicsTraits	Data handle physics traits
CJacBiCGSTABBackend	Sequential Jacobi-preconditioned BiCSTAB solver
CJacCGBackend	Sequential Jacobi-preconditioned CG solver
CJohansenIndices
CKEpsilonFluxVariablesImpl
CKEpsilonFluxVariablesImpl< TypeTag, BaseFluxVariables, DiscretizationMethod::staggered >	The flux variables class for the k-epsilon model using the staggered grid discretization
CKEpsilonIOFields	Adds I/O fields for the k-epsilon turbulence model
CKEpsilonResidualImpl
CKEpsilonResidualImpl< TypeTag, BaseLocalResidual, DiscretizationMethod::staggered >	Element-wise calculation of the residual for k-epsilon models using the staggered discretization
CKEpsilonVolumeVariables	Volume variables for the isothermal single-phase k-epsilon model
CKOmegaFluxVariablesImpl
CKOmegaFluxVariablesImpl< TypeTag, BaseFluxVariables, DiscretizationMethod::staggered >	The flux variables class for the k-omega model using the staggered grid discretization
CKOmegaIOFields	Adds I/O fields for the Reynolds-Averaged Navier-Stokes model
CKOmegaResidualImpl
CKOmegaResidualImpl< TypeTag, BaseLocalResidual, DiscretizationMethod::staggered >	Element-wise calculation of the residual for k-omega models using the staggered discretization
CKOmegaVolumeVariables	Volume variables for the isothermal single-phase k-omega 2-Eq model
CKovasznayTestProblem	Test problem for the staggered grid (Kovasznay 1948, [38])
CKuevetteProblem	Non-isothermal gas injection problem where a gas (e.g. steam/air) is injected into a unsaturated porous medium with a residually trapped NAPL contamination
CKuevetteSpatialParams	Definition of the spatial parameters for the kuevette problem
CL2Norm
CLameParams	Structure encapsulating the lame parameters
CLinearAlgebraPreparator	Prepare the linear algebra member variables
CLinearAlgebraPreparator< GridView, AmgTraits, true >	Specialization for the parallel case
CLinearLocalStiffness	Base class for linear local assemblers
CLinearMaterial	Linear capillary pressure and relative permeability <-> saturation relations
CLinearMaterialParams	Reference implementation of params for the linear material law
CLinearPDESolver	An implementation of a linear PDE solver
CLinearSolver	Base class for linear solvers
ClinearSolverAcceptsMultiTypeMatrix	The default
ClinearSolverAcceptsMultiTypeMatrix< ILU0BiCGSTABBackend >
ClinearSolverAcceptsMultiTypeMatrix< ILU0CGBackend >
ClinearSolverAcceptsMultiTypeMatrix< ILU0RestartedGMResBackend >
ClinearSolverAcceptsMultiTypeMatrix< ILUnBiCGSTABBackend >
ClinearSolverAcceptsMultiTypeMatrix< ILUnCGBackend >
ClinearSolverAcceptsMultiTypeMatrix< ILUnRestartedGMResBackend >
CLoadSolutionDataHandle	Data handle to communicate the solution on ghosts and overlaps when reading from vtk file in parallel
CLocalStiffness	Base class for local assemblers
CLoggingParameterTree	A parameter tree that logs which parameters have been used
CLowReKEpsilonFluxVariablesImpl
CLowReKEpsilonFluxVariablesImpl< TypeTag, BaseFluxVariables, DiscretizationMethod::staggered >	The flux variables class for the low-Reynolds k-epsilon model using the staggered grid discretization
CLowReKEpsilonIOFields	Adds I/O fields for the low-Re k-epsilon turbulence model
CLowReKEpsilonResidualImpl
CLowReKEpsilonResidualImpl< TypeTag, BaseLocalResidual, DiscretizationMethod::staggered >	Element-wise calculation of the residual for low-Reynolds k-epsilon models using the staggered discretization
CLowReKEpsilonVolumeVariables	Volume variables for the isothermal single-phase low-Re k-epsilons model
CmakeFromIndexedType
CmakeFromIndexedType< Variadic, Indexed, std::index_sequence< IndexSeq... > >
CMatrixConverter	A helper classe that converts a Dune::MultiTypeBlockMatrix into a plain Dune::BCRSMatrix TODO: allow block sizes for BCRSMatrix other than 1x1 ?
CMatrixFractureSpatialParams	Definition of the spatial parameters for the matrix and fracture problem
CMatrixProblem	The matrix problem
CMaxwellStefanNCTestProblem	Test problem for the Maxwell-Stefan model
CMaxwellStefanOnePThreeCTestProblem	Definition of a problem for a 1p3c problem: Component transport of N2, CO2 and H2
CMaxwellStefansLawImplementation
CMaxwellStefansLawImplementation< TypeTag, DiscretizationMethod::box, referenceSystem >	Specialization of Maxwell Stefan's Law for the Box method
CMaxwellStefansLawImplementation< TypeTag, DiscretizationMethod::cctpfa, referenceSystem >	Specialization of Maxwell Stefan's Law for the CCTpfa method
CMaxwellStefansLawImplementation< TypeTag, DiscretizationMethod::staggered, referenceSystem >	Specialization of Maxwell Stefan's Law for the Staggered method
CMaxwellStefanTestProblem	Definition of a problem for the MaxwellStefan problem
CMaxwellStefanTestSpatialParams	Definition of the spatial parameters for the MaxwellStefan problem
CMcWhorterAnalytic	Analytic solution of the McWhorter problem
CMimeticOperatorAssemblerTwoP	Levelwise assembler
CMimeticOperatorAssemblerTwoPAdaptive	Levelwise assembler
CMimeticPressure2P	Mimetic method for the pressure equation
CMimeticPressure2PAdaptive	Mimetic method for the pressure equation
CMimeticTwoPLocalStiffness	Compute local stiffness matrix for conforming finite elements for the full 2-phase pressure equation
CMimeticTwoPLocalStiffnessAdaptive	Compute local stiffness matrix for conforming finite elements for the full 2-phase pressure equation
CMineralizationIOFields	Adds I/O fields specific to a NCMin model
CMineralizationLocalResidual	Element-wise calculation of the local residual for problems using a one/two-phase n-component mineralization model
CMineralizationModelTraits	Specifies a number properties of models that consider mineralization proceses
CMineralizationVolumeVariables	Contains the quantities which are are constant within a sub-control volume of the finite volume grid in an m-phase, n-component, mineralization model
CMiscibleMultiPhaseComposition	Computes the composition of all phases of a N-phase, N-component fluid system assuming that all N phases are present
CMonotoneCubicSpline	A monotone cubic spline
CMPAdapter	An adapter for mpnc to use the capillary pressure-saturation relationships
CMPAdapter< MaterialLaw, 2 >
CMpfaDimensionHelper	Dimension-specific helper class to get data required for mpfa scheme
CMpfaDimensionHelper< GridGeometry, 2, 2 >	Dimension-specific mpfa helper class for dim == 2 & dimWorld == 2
CMpfaDimensionHelper< GridGeometry, 2, 3 >	Dimension-specific mpfa helper class for dim == 2 & dimWorld == 2. Reuses some functionality of the specialization for dim = dimWorld = 2
CMpfaDimensionHelper< GridGeometry, 3, 3 >	Dimension-specific mpfa helper class for dim == 3 & dimWorld == 3
CMpfaOFacetCouplingInteractionVolumeAssembler	Specialization of the interaction volume-local assembler class for the schemes using an mpfa-o type assembly in the context of facet coupling
CMpfaOInteractionVolumeAssembler	Specialization of the interaction volume-local assembler class for the schemes using an mpfa-o type assembly
CMPFATwoPTestProblem	Test problem for sequential 2p models
CMpLinearMaterial	Implements a linear saturation-capillary pressure relation
CMpLinearMaterialParams	Reference implementation of params for the linear M-phase material material
CMPNCComparisonProblem	Problem where air is injected in a unsaturated porous medium
CMPNCComparisonSpatialParams	Definition of the spatial params properties for the obstacle problem
CMPNCIndices	The primary variable and equation indices for the MpNc model
CMPNCIOFields	Adds I/O fields specific to the mpnc model
CMPNCLocalResidual	MpNc specific details needed to approximately calculate the local defect in the fully implicit scheme
CMPNCModelTraits	Specifies a number properties of the m-phase n-component model
CMPNCNonequilibriumModelTraits	Specifies a number properties of the m-phase n-component model in conjunction with non-equilibrium. This is necessary because the mpnc indices are affected by the non-equilibrium which can thus not be plugged on top of it that easily
CMPNCVolumeVariablesImplementation
CMPNCVolumeVariablesImplementation< Traits, false >
CMPNCVolumeVariablesImplementation< Traits, true >
CMPNCVolumeVariablesTraits	Traits class for the mpnc volume variables
CMultiDomainFVAssembler	A linear system assembler (residual and Jacobian) for finite volume schemes (box, tpfa, mpfa, ...) with multiple domains
CMultiDomainFVGridGeometry	A multidomain wrapper for multiple grid geometries
CMultiDomainFVGridVariables	A multidomain wrapper for multiple grid variables
CMultiDomainFVProblem	A multidomain wrapper for multiple problems
CMultiDomainGlue	Manages the coupling between domain elements and lower dimensional elements Point sources on each integration point are computed by an AABB tree. Both domain are assumed to be discretized using a cc finite volume scheme
CMultiDomainNewtonSolver	Newton sover for coupled problems
►CMultiDomainTraits
CSubDomain
CMultiDomainVtkOutputModule	A multidomain wrapper for multiple vtk output modules
CMultiTypeBlockVectorProxy
CNavierStokesAnalyticProblem	Test for the 1-D Navier-Stokes model with an analytical solution
CNavierStokesFluxVariablesImpl
CNavierStokesFluxVariablesImpl< TypeTag, DiscretizationMethod::staggered >	The flux variables class for the Navier-Stokes model using the staggered grid discretization
CNavierStokesIndices	The common indices for the isothermal Navier-Stokes model
CNavierStokesIOFields	Adds I/O fields for the Navier-Stokes model
CNavierStokesModelTraits	Traits for the Navier-Stokes model
CNavierStokesNCModelTraits	Traits for the multi-component free-flow model
CNavierStokesParentProblemImpl	The implementation is specialized for the different discretizations
CNavierStokesParentProblemImpl< TypeTag, DiscretizationMethod::staggered >
CNavierStokesProblem	Navier-Stokes problem base class
CNavierStokesResidualImpl
CNavierStokesResidualImpl< TypeTag, DiscretizationMethod::staggered >	Element-wise calculation of the Navier-Stokes residual for models using the staggered discretization
CNavierStokesTestL2Error	Routines to calculate the discrete L2 error
CNavierStokesVolumeVariables	Volume variables for the single-phase Navier-Stokes model
CNavierStokesVolumeVariablesTraits	Traits class for the volume variables of the Navier-Stokes model
CNcpFlash	Determines the phase compositions, pressures and saturations given the total mass of all components
►CNetPBMReader	A simple reader class for the Netpbm format (https://en.wikipedia.org/wiki/Netpbm_format). So far, only black and white (*.pbm) and grayscale (*pgm) images are supported
CFormat	A struct that holds all information of the image format
CHeaderData	A struct that contains all header data of the image
CResult	The return type of the reading functions. Holds the actual pixel values and the header data
CNewtonConvergenceWriter	Writes the intermediate solutions for every Newton iteration
CNewtonSolver	An implementation of a Newton solver
CNodalIndexSetDefaultTraits	Default traits to be used in conjuntion with the dual grid nodal index set
CNonConformingGridIntersectionMapper	Defines an intersection mapper for mapping of global DOFs assigned to faces which also works for non-conforming grids and corner-point grids
CNonEquilbriumIndices	The primary variable and equation indices for the MpNc model
CNonEquilibriumFluidState	Represents all relevant thermodynamic quantities of a multi-phase, multi-component fluid system without using any assumptions
CNonEquilibriumGridVariables	This class stores the velocities which are used to compute Reynolds numbers for the source terms of non-equilibrium models
CNonEquilibriumIOFieldsImplementation
CNonEquilibriumIOFieldsImplementation< ModelTraits, EquilibriumIOFields, false >
CNonEquilibriumIOFieldsImplementation< ModelTraits, EquilibriumIOFields, true >	Adds I/O fields specific to non-equilibrium models with chemical and thermal nonequilbirum or thermal non-equilibrium only
CNonEquilibriumLocalResidualImplementation
CNonEquilibriumLocalResidualImplementation< TypeTag, false >	The mass conservation part of the nonequilibrium model for a model without chemical non-equilibrium
CNonEquilibriumLocalResidualImplementation< TypeTag, true >	The mass conservation part of the nonequilibrium model for a model assuming chemical non-equilibrium and two phases but assuming thermal equilibrium
CNonEquilibriumMassFluidState	Represents all relevant thermodynamic quantities of a multi-phase, multi-component fluid system
CNonEquilibriumModelTraits	Specifies a number properties of porous-medium flow non-equilibrium models
CNonEquilibriumNewtonSolver	A nonequilibrium specific newton solver
CNonEquilibriumVolumeVariablesImplementation	This class contains the volume variables required for the modules which require the specific interfacial area between fluid phases
CNonEquilibriumVolumeVariablesImplementation< Traits, EquilibriumVolumeVariables, false, true, 1 >
CNonEquilibriumVolumeVariablesImplementation< Traits, EquilibriumVolumeVariables, false, true, 2 >
CNonEquilibriumVolumeVariablesImplementation< Traits, EquilibriumVolumeVariables, true, false, 0 >
CNonEquilibriumVolumeVariablesImplementation< Traits, EquilibriumVolumeVariables, true, true, 2 >
CNonoverlappingSolverTraits	NonoverlappingSolverTraits used by discretization with non-overlapping parallel model
CNonoverlappingSolverTraits< MType, VType, true >
CNoPrimaryVariableSwitch	Empty class for models without pri var switch
CNullParameterCache	The a parameter cache which does nothing
CNumericalProblem	Exception thrown if a fixable numerical problem occurs
CNumericDifferentiation	A class for numeric differentiation with respect to a scalar parameter
CNumericEpsilon	A helper class for local assemblers using numeric differentiation to determine the epsilon
CObstacleProblem	Problem where liquid water is injected which has to go around an obstacle with \(10^3\) lower permeability
CObstacleSpatialParams	Definition of the spatial params properties for the obstacle problem
COneEqFluxVariablesImpl
COneEqFluxVariablesImpl< TypeTag, BaseFluxVariables, DiscretizationMethod::staggered >	The flux variables class for the one-equation model by Spalart-Allmaras using the staggered grid discretization
COneEqIndices	The common indices for the isothermal one-equation turbulence model by Spalart-Allmaras
COneEqIOFields	Adds I/O fields for the one-equation turbulence model by Spalart-Allmaras
COneEqResidualImpl
COneEqResidualImpl< TypeTag, BaseLocalResidual, DiscretizationMethod::staggered >	Element-wise calculation of the residual for one-equation turbulence models using the staggered discretization
COneEqVolumeVariables	Volume variables for the isothermal single-phase one-equation turbulence model by Spalart-Allmaras
COneModelProblem	Base class for definition of an sequential diffusion (pressure) or transport problem
COnePBulkProblem	Test problem for the incompressible one-phase model with coupling across the bulk grid facets
COnePEdgeProblem	The (d-2)-dimensional test problem for the incompressible one-phase model with coupling across the bulk grid facets
COnePFacetProblem	The (d-1)-dimensional test problem for the incompressible one-phase model with coupling across the bulk grid facets
COnePIncompressibleLocalResidual	Element-wise calculation of the residual and its derivatives for a single-phase, incompressible, test problem
COnePIndices	Indices for the one-phase model
COnePIOFields	Adds I/O fields specific to the one phase model
COnePLowDimProblem	The lower-dimensional test problem for the incompressible one-phase model with coupling across the bulk grid facets
COnePModelTraits	Specifies a number properties of single-phase models
COnePNCIndices	The indices for the isothermal one-phase n-component model
COnePNCIOFields	Adds I/O fields specific to the OnePNC model
COnePNCModelTraits	Specifies a number properties of models that consider a single-phase with multiple components
COnePNCNonequilibriumTestSpatialParams	Definition of the spatial parameters for the 1pnc test problems
COnePNCTestSpatialParams	Definition of the spatial parameters for the 1pnc test problems
COnePNCUnconstrainedModelTraits
COnePNCVolumeVariables	Contains the quantities which are are constant within a finite volume in the one-phase, n-component model
COnePNCVolumeVariablesTraits	Traits class for the volume variables of the single-phase model
COnePNIConductionProblem	Test for the OnePModel in combination with the NI model for a conduction problem
COnePNIConvectionProblem	Test for the OnePModel in combination with the NI model for a convection problem
COnePNISpatialParams	Definition of the spatial parameters for the 1pni problems
COnePSingularityProblem	Test problem for the one-phase model: Water is injected in a single point in the middle of the domain
COnePSingularityProblemTimeDependent	Test problem for the one-phase model: Water is injected in a single point in the middle of the domain
COnePSingularitySpatialParams	The spatial parameters class for the test problem using the 1p model with point sources
COnePSpatialParams	The spatial parameters class for the test problem using the 1p cc model
COnePSubProblem	The single-phase sub problem in the el1p coupled problem
COnePTestProblem	Multidomain test problem for the incompressible one-phase model
COnePTestProblemInternalDirichlet	A test for internal Dirichlet constraints
COnePTestSpatialParams	The spatial parameters class for the test problem using the incompressible 1p model
COnePTwoCNIConductionProblem	Definition of a problem, for the 1pnc problem
COnePTwoCNIConvectionProblem	Test for the OnePTwoCModel in combination with the NI model for a convection problem
COnePTwoCNITransientBCProblem	Test for the OnePTwoCModel in combination with the NI model for a convection problem
COnePTwoCTestProblem	Definition of a problem for the 1pnc problem: Component transport of nitrogen dissolved in the water phase
COnePTwoCThermalNonequilibriumProblem	Definition of a problem, for the 1pnc problem
COnePVolumeVariables	Contains the quantities which are constant within a finite volume in the one-phase model
COnePVolumeVariablesTraits	Traits class for the volume variables of the single-phase model
COptional	A wrapper that can either contain an object of T or be empty
COverlappingSolverTraits	OverlappingSolverTraits used by discretization with overlapping parallel model
COverlappingSolverTraits< MType, VType, true >
CParallelAMGBackend	A linear solver based on the ISTL AMG preconditioner and the ISTL BiCGSTAB solver
CParallelISTLHelper	A parallel helper class providing a nonoverlapping decomposition of all degrees of freedom
CParameterCacheBase	The base class of the parameter cache classes for fluid systems
CParameterException	Exception thrown if a run-time parameter is not specified correctly
CParameters	Parameter class managing runtime input parameters
CParkerVanGen3P	Implementation of van Genuchten's capillary pressure <-> saturation relation. This class bundles the "raw" curves as static members and doesn't concern itself converting absolute to effective saturations and vince versa
CParkerVanGen3PParams	Reference implementation of a van Genuchten params
CPartialReassembler	Detects which entries in the Jacobian have to be recomputed
CPartialReassemblerEngine	Partial reassembler engine specialized for discretization methods
CPartialReassemblerEngine< Assembler, DiscretizationMethod::box >	The partial reassembler engine specialized for the box method
CPartialReassemblerEngine< Assembler, DiscretizationMethod::ccmpfa >	The partial reassembler engine specialized for the cellcentered MPFA method
CPartialReassemblerEngine< Assembler, DiscretizationMethod::cctpfa >	The partial reassembler engine specialized for the cellcentered TPFA method
CPDESolver	A high-level interface for a PDESolver
CPengRobinson	Implements the Peng-Robinson equation of state for liquids and gases
CPengRobinsonMixture	Implements the Peng-Robinson equation of state for a mixture
CPengRobinsonParams	Stores and provides access to the Peng-Robinson parameters
CPengRobinsonParamsMixture	The mixing rule for the oil and the gas phases of the SPE5 problem
CPermeabilityKozenyCarman	The Kozeny-Carman relationship for the calculation of a porosity-dependent permeability. When the porosity is implemented as solution-independent, using this relationship for the permeability leads to unnecessary overhead
CPipeLauferProblem	Test problem for the one-phase (Navier-) Stokes problem in a channel
CPlotEffectiveDiffusivityModel	Interface for plotting the multi-component-matrix-interaction laws
CPlotMaterialLaw	Interface for plotting the two-phase fluid-matrix-interaction laws
CPlotThermalConductivityModel	Interface for plotting the non-isothermal two-phase fluid-matrix-interaction laws
CPointCloudVtkWriter	A VTK output module to simplify writing dumux simulation data to VTK format
CPointSource	A point source base class
CPointSourceData	A point source data class used for integration in multidimension models
CPointSourceDataCircleAverage	A point source data class used for integration in multidimension models
CPointSourceTestProblem	Soil contamination problem where DNAPL infiltrates a fully water saturated medium
CPoroElasticIOFields	Adds I/O fields specific to the poro-elastic model
CPoroElasticLocalResidual	Element-wise calculation of the local residual for problems using the poroelastic model
CPoroElasticModelTraits	Specifies a number properties of the poroelastic model
CPoroElasticProblem	Problem definition for the deformation of a poro-elastic body
CPoroElasticSpatialParams	Definition of the spatial parameters for the poro-elastic problem
CPoroElasticSubProblem	The poro-elastic sub-problem in the el1p coupled problem
CPoroElasticVolumeVariables	Contains the quantities which are constant within a finite volume in the poroelastic model
CPoroMechanicsCouplingManager
CPorosityDeformation	A relationship for the porosity of a porous medium under mechanical deformation
CPorosityPrecipitation	Calculates the porosity depending on the volume fractions of precipitated minerals
CPorousMediumFlowNIModelTraits	Specifies a number properties of non-isothermal porous medium flow models based on the specifics of a given isothermal model
CPorousMediumFlowProblem	Base class for all fully implicit porous media problems
CPorousMediumFlowVelocity	Velocity computation for implicit (porous media) models
CPorousMediumFlowVelocityOutput	Velocity output policy for implicit (porous media) models
CPorousMediumFlowVolumeVariables	The isothermal base class
CPorousMediumFluxVariables	The porous medium flux variables class that computes advective / convective, molecular diffusive and heat conduction fluxes
CPorousMediumFluxVariablesCacheFillerImplementation
CPorousMediumFluxVariablesCacheFillerImplementation< TypeTag, DiscretizationMethod::ccmpfa >	Specialization of the flux variables cache filler for the cell centered mpfa method
CPorousMediumFluxVariablesCacheFillerImplementation< TypeTag, DiscretizationMethod::cctpfa >	Specialization of the flux variables cache filler for the cell centered tpfa method
CPorousMediumFluxVariablesCacheImplementation
CPorousMediumFluxVariablesCacheImplementation< TypeTag, DiscretizationMethod::box >
CPorousMediumFluxVariablesCacheImplementation< TypeTag, DiscretizationMethod::ccmpfa >
CPorousMediumFluxVariablesCacheImplementation< TypeTag, DiscretizationMethod::cctpfa >
CPressureOverlayFluidState	This is a fluid state which allows to set the fluid pressures and takes all other quantities from an other fluid state
CPrimaryVariableSwitch	The primary variable switch controlling the phase presence state variable
►CProjector	Does an L2-projection from one discrete function space into another. The convenience functions makeProjectorPair or makeProjector can be used to create such a projection
CParams	Parameters that can be passed to project()
CProjectorTraits	Traits class stating the type of projector between to bases
CPseudoOnePTwoCFluidState	Container for compositional variables in a 1p2c situation
CRANSIOFields	Adds I/O fields for the Reynolds-Averaged Navier-Stokes model
CRANSProblemBase	Reynolds-Averaged Navier-Stokes problem base class
CRANSProblemImpl	Forward declare
CRANSProblemImpl< TypeTag, TurbulenceModel::kepsilon >	K-epsilon turbulence problem base class
CRANSProblemImpl< TypeTag, TurbulenceModel::komega >	K-Omega turbulence model problem base class
CRANSProblemImpl< TypeTag, TurbulenceModel::lowrekepsilon >	Low-Re k-epsilon turbulence problem base class
CRANSProblemImpl< TypeTag, TurbulenceModel::oneeq >	One-equation turbulence problem base class
CRANSProblemImpl< TypeTag, TurbulenceModel::zeroeq >	Zero-equation turbulence problem base class
CRANSTwoEqIndices	The common indices for isothermal two-equation RANS models
CRANSVolumeVariables	Volume variables for the isothermal single-phase Reynolds-Averaged Navier-Stokes models
CRegularizedBrooksCorey	Implementation of the regularized Brooks-Corey capillary pressure / relative permeability <-> saturation relation. This class bundles the "raw" curves as static members and doesn't concern itself converting absolute to effective saturations and vice versa
CRegularizedBrooksCoreyParams	Parameters that are necessary for the regularization of the Brooks-Corey capillary pressure model
CRegularizedLinearMaterial	Implements a linear saturation-capillary pressure relation
CRegularizedLinearMaterialParams	Parameters that are necessary for the regularization of the linear constitutive relations
CRegularizedParkerVanGen3P	Implementation of the regularized van Genuchten's capillary pressure <-> saturation relation. This class bundles the "raw" curves as static members and doesn't concern itself converting absolute to effective saturations and vince versa
CRegularizedParkerVanGen3PParams	Parameters that are necessary for the regularization of the Parker - van Genuchten capillary pressure model
CRegularizedVanGenuchten	Implementation of the regularized van Genuchten's capillary pressure / relative permeability <-> saturation relation
CRegularizedVanGenuchtenOfTemperature	Implementation of the regularized van Genuchten's capillary pressure / relative permeability <-> saturation relation as a function of temperature
CRegularizedVanGenuchtenParams	Parameters that are necessary for the regularization of VanGenuchten "material law"
CReservedBlockVector	A arithmetic block vector type based on DUNE's reserved vector
CRestart	Load or save a state of a model to/from the harddisk
CResultEvaluation	Calculate errors for the diffusion test problem
CRichardsAnalyticalProblem	A one-dimensional infiltration problem with a smooth, given solution
CRichardsAnalyticalSpatialParams	The spatial parameters for the RichardsAnalyticalProblem
CRichardsIndices	Index names for the Richards model
CRichardsIOFields	Adds I/O fields specific to the Richards model
CRichardsLensProblem	A water infiltration problem with a low-permeability lens embedded into a high-permeability domain which uses the Richards model
CRichardsLensSpatialParams	The spatial parameters for the RichardsLensProblem
CRichardsLocalResidual	Element-wise calculation of the Jacobian matrix for problems using the Richards fully implicit models
CRichardsModelTraits	Specifies a number properties of the Richards model
CRichardsNCIndices	The indices for the isothermal Richards, n-component model
CRichardsNCIOFields	Adds I/O fields specific to the Richards model
CRichardsNCModelTraits	Specifies a number properties of the Richards n-components model
CRichardsNCVolumeVariables	Contains the quantities which are constant within a finite volume in the Richards, n-component model
CRichardsNewtonSolver	A Richards model specific Newton solver
CRichardsNIConductionProblem	Test for the RichardsModel in combination with the NI model for a conduction problem: The simulation domain is a tube with an elevated temperature on the left hand side
CRichardsNIConvectionProblem	Test for the RichardsModel in combination with the NI model for a convection problem: The simulation domain is a tube where water with an elevated temperature is injected at a constant rate on the left hand side
CRichardsNIEvaporationProblem	Test for the RichardsModel in combination with the NI model for evaporation
CRichardsNISpatialParams
CRichardsVolumeVariables	Volume averaged quantities required by the Richards model
CRichardsVolumeVariablesTraits	Traits class for the Richards model
CRichardsWellTracerProblem	A water infiltration problem with a low-permeability lens embedded into a high-permeability domain which uses the Richards box model
CRichardsWellTracerSpatialParams	The spatial parameters for the RichardsWellTracerProblem
CRootProblem	Exact solution 1D-3D
CRootSpatialParams	Definition of the spatial parameters for the root xylem flow
CRoughChannelProblem	A simple flow in a rough channel with friction law after Manning
CRoughChannelSpatialParams	The spatial parameters class for the rough channel test
CSagdProblem
CSagdSpatialParams	Definition of the spatial parameters for the SAGD problem
CSalinizationProblem	Problem where brine is evaporating at the top boundary. The system is closed at the remaining boundaries
CSalinizationSpatialParams	Spatial parameters for the salinization problem, where evaporation from a porous medium saturated wit brine and air leads to precipitation of salt
CSaltWaterIntrusionTestProblem	Definition of a problem involving salt water intrusion into a fresh water aquifer
CSaturationOverlayFluidState	This is a fluid state which allows to set the fluid saturations and takes all other quantities from an other fluid state
CScotchBackend
CScvfIterator	Iterators over sub control volume faces of an fv geometry
CScvfToScvBoundaryTypes	Convert intersection boundary types to vertex boundary types
CScvIterator	Iterators over sub control volumes
CSequentialFVSpatialParams	The base class for spatial parameters of a multi-phase problem using the fv method
CSequentialFVSpatialParamsOneP	The base class for spatial parameters of problems using the fv method
CSequentialOnePCommonIndices	The common indices for the 1-p models
CSequentialTwoPCommonIndices	The common indices for the isothermal two-phase model
CSequentialTwoPIndices	The indices for the \(p_w-S_n\) formulation of the isothermal two-phase model
CSequentialTwoPIndices< SequentialTwoPCommonIndices::pGlobalSn, PVOffset >	The indices for the \(p_{global}-S_n\) formulation of the isothermal two-phase model
CSequentialTwoPIndices< SequentialTwoPCommonIndices::pGlobalSw, PVOffset >	The indices for the \(p_{global}-S_w\) formulation of the isothermal two-phase model
CSequentialTwoPIndices< SequentialTwoPCommonIndices::pnsn, PVOffset >	The indices for the \(p_n-S_n\) formulation of the isothermal two-phase model
CSequentialTwoPIndices< SequentialTwoPCommonIndices::pnsw, PVOffset >	The indices for the \(p_n-S_w\) formulation of the isothermal two-phase model
CSequentialTwoPIndices< SequentialTwoPCommonIndices::pwsw, PVOffset >	The indices for the \(p_w-S_w\) formulation of the isothermal two-phase model
CSequentialTwoPTwoCIndices	The common indices for the 2p2c model
CSequentialTwoPTwoCIndicesAdaptive	Missing indices to the mpfa2p model
CShallowWaterFlux	Computes the shallow water flux by solving a riemann problem
CShallowWaterFluxVariables	The flux variables class for the shallow water model
CShallowWaterIndices	The common indices for the shallow water equations model
CShallowWaterIOFields	Adds vtk output fields for the shallow water model
CShallowWaterModelTraits	Specifies a number properties of shallow water models
CShallowWaterProblem	Shallow water problem base class
CShallowWaterResidual	Element-wise calculation of the residual for the shallow water equations
CShallowWaterVolumeVariables	Volume variables for the shallow water equations model
CShallowWaterVolumeVariablesTraits	Traits class for the volume variables of the shallow water model
CSincosTestProblem	Test problem for the staggered grid
CSoilProblem	Definition of a problem, for the 1p2c problem: Component transport of oxygen in interstitial fluid
CSoilSpatialParams	Definition of the spatial parameters for the soil problem
CSolDependentPointSource	A point source class for time dependent point sources
CSolidEnergyIndices	The indices
CSolidEnergyLocalResidual	Element-wise calculation of the residual
CSolidEnergyModelTraits	The energy balance equation for a porous solid
CSolidEnergyProblem	A piece of stone heated by a network of channels
CSolidEnergySpatialParams	Definition of the spatial parameters for the solid energy test
CSolidEnergyVolumeVariables	Class for computation of all volume averaged quantities
CSolidEnergyVolumeVariablesTraits	The volume variable traits
►CSolverTag
CLinear
CNonlinear
CSORBiCGSTABBackend	Sequential SOR-preconditioned BiCSTAB solver
CSORCGBackend	Sequential SOR-preconditioned CG solver
CSpe5ParameterCache	Specifies the parameters required by the SPE5 problem which are despondent on the thermodynamic state
CSpline	A 3rd order polynomial spline
CSpline< Scalar, -1 >	Specialization of a spline with the number of sampling points only known at run time
CSpline< Scalar, 0 >	Do not allow splines with zero sampling points
CSpline< Scalar, 1 >	Do not allow splines with one sampling point
CSpline< Scalar, 2 >	Spline for two sampling points
CSplineCommon_	The common code for all 3rd order polynomial splines
CSSORBiCGSTABBackend	Sequential SSOR-preconditioned BiCGSTAB solver
CSSORCGBackend	Sequential SSOR-preconditioned CG solver
CSSORRestartedGMResBackend	Sequential SSOR-preconditioned GMRes solver
CStaggeredCouplingManager	Base coupling manager for the staggered discretization
CStaggeredDefaultGridFaceVariablesTraits	Traits class to be used for the StaggeredGridFaceVariables
CStaggeredDefaultGridFluxVariablesCacheTraits	Traits class to be used for the StaggeredGridVFluxVariablesCache
CStaggeredDefaultScvfGeometryTraits	Default traits class to be used for the sub-control volume faces for the staggered finite volume scheme
CStaggeredElementFaceVariables	Base class for the face variables vector
CStaggeredElementFaceVariables< GFV, false >	Class for the face variables vector. Specialization for the case of not storing the face variables globally
CStaggeredElementFaceVariables< GFV, true >	Class for the face variables vector. Specialization for the case of storing the face variables globally
CStaggeredElementFluxVariablesCache	Base class for the stencil local flux variables cache for the staggered model
CStaggeredElementFluxVariablesCache< GFVC, false >	Class for the stencil local flux variables cache for the staggered model. Specialization for the case of not storing the fluxvars cache globally
CStaggeredElementFluxVariablesCache< GFVC, true >	Class for the stencil local flux variables cache for the staggered model. Specialization for the case of storing the fluxvars cache globally
CStaggeredElementVolumeVariables	Base class for the element volume variables vector for the staggered model
CStaggeredElementVolumeVariables< GVV, false >	Class for the element volume variables vector for the staggered model. Specialization in case the volume variables are not stored globally
CStaggeredElementVolumeVariables< GVV, true >	Class for the element volume variables vector for the staggered model. Specialization in case the volume variables are stored globally
CStaggeredFaceSolution	The global face variables class for staggered models
CStaggeredFaceVariables	The face variables class for free flow staggered grid models. Contains all relevant velocities for the assembly of the momentum balance. When the upwindSchemeOrder is set to 2, additional velocities located at Dofs further from the central stencil will be added and used when calculating the advective term. When the order remains at 1, these velocities will not be provided
►CStaggeredFreeFlowBoundaryTypes	Class to specify the type of a boundary for the staggered Navier-Stokes model
CStaggeredFreeFlowBoundaryInfo
CStaggeredFreeFlowConnectivityMap	Stores the dof indices corresponding to the neighboring cell centers and faces that contribute to the derivative calculation. Specialization for the staggered free flow model
►CStaggeredFreeFlowDefaultFVGridGeometryTraits	Default traits for the finite volume grid geometry
CDofTypeIndices
CStaggeredFreeFlowVelocityOutput	Velocity output for staggered free-flow models
CStaggeredFVAssembler	A linear system assembler (residual and Jacobian) for staggered finite volume schemes. This is basically just a wrapper for the MultiDomainFVAssembler which simplifies the set-up of uncoupled problems using the staggered scheme
CStaggeredFVElementGeometry	Stencil-local finite volume geometry (scvs and scvfs) for staggered models This builds up the sub control volumes and sub control volume faces for each element in the local scope we are restricting to, e.g. stencil or element
CStaggeredFVElementGeometry< GG, false >	Base class for the finite volume geometry vector for staggered models This locally builds up the sub control volumes and sub control volume faces for each element. Specialization for grid caching enabled
CStaggeredFVElementGeometry< GG, true >	Base class for the finite volume geometry vector for staggered models This locally builds up the sub control volumes and sub control volume faces for each element. Specialization for grid caching enabled
CStaggeredFVGridGeometry	Base class for the finite volume geometry vector for staggered models This builds up the sub control volumes and sub control volume faces for each element
CStaggeredFVGridGeometry< GV, false, Traits >	Base class for the finite volume geometry vector for staggered models This builds up the sub control volumes and sub control volume faces for each element. Specialization in case the FVElementGeometries are stored
CStaggeredFVGridGeometry< GV, true, Traits >	Base class for the finite volume geometry vector for staggered models This builds up the sub control volumes and sub control volume faces for each element. Specialization in case the FVElementGeometries are stored
CStaggeredFVProblem	Base class for all staggered finite-volume problems
CStaggeredGridDefaultGridVolumeVariablesTraits
CStaggeredGridFaceVariables	Face variables cache class for staggered models
CStaggeredGridFaceVariables< P, FV, false, Traits >	Face variables cache class for staggered models. Specialization in case of not storing the face variables
CStaggeredGridFaceVariables< P, FV, true, Traits >	Face variables cache class for staggered models. Specialization in case of storing the face variables
CStaggeredGridFluxVariablesCache	Flux variables cache class for staggered models
CStaggeredGridFluxVariablesCache< P, FVC, FVCF, false, upwindSchemeOrder, TheTraits >	Flux variables cache class for staggered models. Specialization in case of not storing the flux cache
CStaggeredGridFluxVariablesCache< P, FVC, FVCF, true, upwindSchemeOrder, TheTraits >	Flux variables cache class for staggered models. Specialization in case of storing the flux cache
CStaggeredGridVariables	Class storing data associated to scvs and scvfs
CStaggeredGridVariablesView	Base class for cell center of face specific auxiliary GridVariables classes. Provides a common interface and a pointer to the actual grid variables
CStaggeredGridVolumeVariables	Grid volume variables class for staggered models
CStaggeredGridVolumeVariables< Traits, false >	Grid volume variables class for staggered models. Specialization in case of not storing the volume variables
CStaggeredGridVolumeVariables< Traits, true >	Grid volume variables class for staggered models. Specialization in case of storing the volume variables
CStaggeredLocalResidual	Calculates the element-wise residual for the staggered FV scheme
►CStaggeredMultiDomainTraits
CSubDomain
CStaggeredNewtonConvergenceWriter	Writes the intermediate solutions for every Newton iteration (for staggered grid scheme)
CStaggeredSubControlVolumeFace	Class for a sub control volume face in the staggered method, i.e a part of the boundary of a sub control volume we compute fluxes on
CStaggeredUpwindFluxVariables	The upwinding variables class for the Navier-Stokes model using the staggered grid discretization
CStaggeredUpwindMethods	This file contains different higher order methods for approximating the velocity
CStaggeredVelocityGradients	Helper class for calculating the velocity gradients for the Navier-Stokes model using the staggered grid discretization
CStaggeredVtkOutputModule	A VTK output module to simplify writing dumux simulation data to VTK format Specialization for staggered grids with dofs on faces
CStationaryVelocityField	Evaluates a user given velocity field
CStokesDarcyCouplingDataImplementation
CStokesDarcyCouplingDataImplementation< MDTraits, CouplingManager, enableEnergyBalance, false >	Coupling data specialization for non-compositional models
CStokesDarcyCouplingDataImplementation< MDTraits, CouplingManager, enableEnergyBalance, true >	Coupling data specialization for compositional models
CStokesDarcyCouplingDataImplementationBase	A base class which provides some common methods used for Stokes-Darcy coupling
CStokesDarcyCouplingManager	Coupling manager for Stokes and Darcy domains with equal dimension
CStokesDarcyCouplingMapper	Coupling mapper for Stokes and Darcy domains with equal dimension
CStokesDarcyCouplingOptions	This structs holds a set of options which allow to modify the Stokes-Darcy coupling mechanism during runtime
CStokesSubProblem	Test problem for the 1pnc (Navier-) Stokes problem
CStressVariablesCache	The stress variables cache classes for models involving geomechanics. Store data required for stress calculation
CStressVariablesCache< Scalar, GridGeometry, DiscretizationMethod::box >	We only store discretization-related quantities for the box method
CStressVariablesCache< Scalar, GridGeometry, DiscretizationMethod::ccmpfa >
CStressVariablesCache< Scalar, GridGeometry, DiscretizationMethod::cctpfa >
CSubControlVolumeBase	Base class for a sub control volume, i.e a part of the control volume we are making the balance for. Defines the general interface
CSubControlVolumeFaceBase	Base class for a sub control volume face, i.e a part of the boundary of a sub control volume we computing a flux on
CSubDomainBoxLocalAssembler	The box scheme multidomain local assembler
CSubDomainBoxLocalAssembler< id, TypeTag, Assembler, DiffMethod::numeric, false >	Box scheme multi domain local assembler using numeric differentiation and explicit time discretization
CSubDomainBoxLocalAssembler< id, TypeTag, Assembler, DiffMethod::numeric, true >	Box scheme multi domain local assembler using numeric differentiation and implicit time discretization
CSubDomainBoxLocalAssemblerBase	A base class for all box local assemblers
CSubDomainCCLocalAssembler	The cell-centered scheme multidomain local assembler
CSubDomainCCLocalAssembler< id, TypeTag, Assembler, DiffMethod::analytic, true >	Cell-centered scheme local assembler using analytic differentiation and implicit time discretization
CSubDomainCCLocalAssembler< id, TypeTag, Assembler, DiffMethod::numeric, false >	Cell-centered scheme multidomain local assembler using numeric differentiation and explicit time discretization
CSubDomainCCLocalAssembler< id, TypeTag, Assembler, DiffMethod::numeric, true >	Cell-centered scheme multidomain local assembler using numeric differentiation and implicit time discretization
CSubDomainCCLocalAssemblerBase	A base class for all multidomain local assemblers
CSubDomainStaggeredLocalAssembler	The staggered multidomain local assembler
CSubDomainStaggeredLocalAssembler< id, TypeTag, Assembler, DiffMethod::numeric, true >	Staggered scheme local assembler using numeric differentiation and implicit time discretization
CSubDomainStaggeredLocalAssemblerBase	A base class for all multidomain local assemblers (staggered)
CSubDomainStaggeredLocalAssemblerImplicitBase	A base class for all implicit multidomain local assemblers (staggered)
CSwitchablePrimaryVariables	A primary variable vector with a state to allow variable switches
CTabulated2DFunction	Implements tabulation for a two-dimensional function
CTabulatedCO2Properties	A generic template for tabulated material laws that depend on two parameters
CTankType
CTemperatureOverlayFluidState	This is a fluid state which allows to set the fluid temperatures and takes all other quantities from an other fluid state
CTensorLambdaFactory	Helper class to be used to obtain lambda functions for the tensors involved in the laws that describe the different kind of fluxes that occur in DuMuX models (i.e. advective, diffusive and heat conduction fluxes). The local systems appearing in Mpfa methods have to be solved subject to the different tensors. This class returns lambda expressions to be used in the local systems. The specialization for discretization methods other than mpfa allows compatibility with the TPFA scheme, which could be used for one or more of the tensors. The interfaces of the lambdas are chosen such that all involved tensors can be extracted with the given arguments
CTensorLambdaFactory< DiscretizationMethod::ccmpfa >	Specialization for mpfa schemes
CTest2P2CSpatialParams	Spatial parameters for the sequential 2p2c test
CTest2PSpatialParams	Test problem for the sequential 2p models
CTest3D2PProblem	Test problem for sequential 2p models in 3d
CTest3d2pSpatialParams	Spatial parameters for the 2p 3d test
CTestDecTwoPTwoCProblem	Test problem for the sequential 2p2c model
CTestDiffusion3DProblem	Test problem for diffusion models from the FVCA6 benchmark
CTestDiffusionProblem	Test problem for diffusion models from the FVCA5 benchmark
CTestDiffusionSpatialParams	Spatial parameters for the test problem for diffusion models
CTestDiffusionSpatialParams3d	Spatial parameters for the test problem for diffusion models
CTestIMPESAdaptiveProblem	Test problem for the sequential 2p model
CTestIMPESAdaptiveSpatialParams	Spatial parameters for the sequential 2p test
CTestIMPESSpatialParams	Spatial parameters for the sequential 2p test
CTestMultTwoPTwoCProblem	Test problem for the multiphysics 2p2c model
CTestOnePSpatialParams	Spatial parameters for the test problem for 1-p diffusion models
CTestProblemOneP	Test problem for the sequential one-phase model
CTestSpatialParams	The spatial parameters class for the test problem using the incompressible 1p model
CTestTraits
CTestTransportProblem	Test problem for the explicit transport model
CTestTransportSpatialParams	Spatial parameters for the explicit transport test
CThermalConductivityAverage	Relation for a simple effective thermal conductivity
CThermalConductivityJohansen	Relation for the saturation-dependent effective thermal conductivity
CThermalConductivitySimpleFluidLumping	Relation for the saturation-dependent effective thermal conductivity
CThermalConductivitySolidEnergy
CThermalConductivitySomerton	Relation for the saturation-dependent effective thermal conductivity
CThermoChemProblem	Test for the 1pncmin model in combination with the NI model for a quasi batch reaction of Calciumoxyde to Calciumhydroxide
CThermoChemReaction	Class for the evaluation of the reaction rate of Calciumoxide to Halciumhydroxide
CThermoChemSpatialParams	Definition of the spatial parameters for the thermochemistry problem which uses the non-insothermal 1pncmin model
CThreeDChannelTestProblem	Test problem for the one-phase (Navier-) Stokes model in a 3D or pseudo 3D channel
CThreePIndices	The common indices for the isothermal three-phase model
CThreePIOFields	Adds I/O fields specific to the three-phase model
CThreePModelTraits	Specifies a number properties of three-phase models
CThreePNIConductionProblem	Test for the ThreePModel in combination with the NI model for a conduction problem
CThreePNIConvectionProblem	Test for the ThreePModel in combination with the NI model for a convection problem
CThreePNISpatialParams	Definition of the spatial parameters for the 3pni problems
CThreePThreeCIndices	The indices for the isothermal three-phase three-component model
CThreePThreeCIOFields	Adds I/O fields specific to the three-phase three-component model
CThreePThreeCLocalResidual	Element-wise calculation of the Jacobian matrix for problems using the three-phase three-component fully implicit model
CThreePThreeCModelTraits	Specifies a number properties of two-phase models
CThreePThreeCPrimaryVariableSwitch	The primary variable switch controlling the phase presence state variable
CThreePThreeCVolumeVariables	Contains the quantities which are are constant within a finite volume in the three-phase three-component model
CThreePThreeCVolumeVariablesTraits	Traits class for the 3p3c model
CThreePVolumeVariables	Contains the quantities which are constant within a finite volume in the three-phase model
CThreePVolumeVariablesTraits	Traits class for the two-phase model
CThreePWaterOilIndices	The indices for the isothermal 3p2cni model
CThreePWaterOilIOFields	Adds I/O fields specific to the three-phase three-component model
CThreePWaterOilLocalResidual	Element-wise calculation of the local residual for problems using the ThreePWaterOil fully implicit model
CThreePWaterOilModelTraits	Specifies a number properties of the three-phase two-component model
CThreePWaterOilPrimaryVariableSwitch	The primary variable switch controlling the phase presence state variable
CThreePWaterOilVolumeVariables	Contains the quantities which are are constant within a finite volume in the three-phase, two-component model
CThreePWaterOilVolumeVariablesTraits	Traits class for the two-phase model
CTimeLoop	The default time loop for instationary simulations
CTimeLoopBase	Manages the handling of time dependent problems
CTimeManager	Manages the handling of time dependent problems
CTissueProblem	Definition of a problem, for the 1p2c problem: Component transport of oxygen in interstitial fluid
CTissueSpatialParams	Definition of the spatial parameters for the tissue problem
CTpfaDarcysLawCache	The cache corresponding to tpfa Darcy's Law
CTpfaDarcysLawCacheFiller	Class that fills the cache corresponding to tpfa Darcy's Law
CTpfaForchheimersLawCache	The cache corresponding to tpfa Forchheimer's Law
CTpfaForchheimersLawCacheFiller	Class that fills the cache corresponding to tpfa Forchheimer's Law
CTracerBulkProblem	The problem for the bulk domain of the tracer facet coupling test
CTracerFluidSystem	A simple fluid system with one tracer component
CTracerIndices	Defines the primary variable and equation indices used by the isothermal tracer model
CTracerIOFields	Adds I/O fields specific to the tracer model
CTracerLocalResidual	Element-wise calculation of the local residual for problems using fully implicit tracer model
CTracerLowDimProblem	The problem for the bulk domain of the tracer facet coupling test
CTracerModelTraits	Specifies a number properties of the Richards n-components model
CTracerSpatialParams	Definition of the spatial parameters for the tracer problem
CTracerTest	Definition of a problem for the tracer problem: A rotating velocity field mixes a tracer band in a porous groundwater reservoir
CTracerTestModelTraits	Custom model traits disabling diffusion
CTracerTestProblem	Definition of a problem, for the tracer problem: A rotating velocity field mixes a tracer band in a porous groundwater reservoir
CTracerTestSpatialParams	Definition of the spatial parameters for the tracer problem
CTracerVolumeVariables	Contains the quantities which are constant within a finite volume for the tracer model
CTracerVolumeVariablesTraits	Traits class for the volume variables of the single-phase model
CTransportProblem2P	Base class for a sequential two-phase transport problem
CTubesTestProblem	A test problem for the 1p model: A pipe system with circular cross-section and a branching point embedded in a three-dimensional world
CTubesTestSpatialParams	A test problem for the 1p model: A pipe system with circular cross-section and a branching point embedded in a three-dimensional world
CTurbulenceProperties	This class contains different functions for estimating turbulence properties
CTwoPGridAdaptIndicator	Class defining a standard, saturation dependent indicator for grid adaptation
CTwoPGridDataTransfer	Class performing the transfer of data on a grid from before to after adaptation
CTwoPIncompressibleLocalResidual	Element-wise calculation of the residual and its derivatives for a two-phase, incompressible test problem
CTwoPIndices	Defines the indices required for the two-phase fully implicit model
CTwoPIOFields	Adds I/O fields specific to the two-phase model
CTwoPModelTraits	Specifies a number properties of two-phase models
CTwoPNCDiffusionProblem	Problem where air is injected under a low permeable layer in a depth of 2700m
CTwoPNCDiffusionSpatialParams	Definition of the spatial parameters for the TwoPNCDiffusion problem which uses the isothermal 2p2c box model
CTwoPNCIndices	The indices for the isothermal two-phase n-component model
CTwoPNCIOFields	Adds I/O fields specific to the TwoPNC model
CTwoPNCModelTraits	Specifies a number properties of two-phase n-component models
CTwoPNCPrimaryVariableSwitch	The primary variable switch controlling the phase presence state variable
CTwoPNCVolumeVariables	Contains the quantities which are are constant within a finite volume in the two-phase, n-component model
CTwoPNCVolumeVariablesTraits	Traits class for the volume variables of the single-phase model
CTwoPOneCDarcysLaw	Specialization of Darcy's Law for the two-phase one-component model, including a the possibility to block spurious fluxes of cold water into the steam zone, which can improve the model's convergence behavior (Gudbjerg et al., 2005) [33]
CTwoPOneCIndices	The indices for the two-phase one-component model
CTwoPOneCIOFields	Adds I/O fields specific to two-phase one-component model
CTwoPOneCLocalResidual	Element-wise calculation of the residual for the fully implicit two-phase one-component flow model
CTwoPOneCNIModelTraits	Specifies a number properties of models considering two phases with water as a single component
CTwoPOneCNIVolumeVariablesTraits	Traits class for the two-phase model
CTwoPOneCPrimaryVariableSwitch	The primary variable switch for the two-phase one-component model
CTwoPOneCVolumeVariables	The volume variables (i.e. secondary variables) for the two-phase one-component model
CTwoPScvSaturationReconstruction	Class that computes the non-wetting saturation in an scv from the saturation at the global degree of freedom
CTwoPScvSaturationReconstruction< DiscretizationMethod::box, true >	Specialization for the box scheme with the interface solver enabled
CTwoPSpatialParams	The spatial parameters class for the two-phase sub problem in the el2p test problem
CTwoPSubProblem	The two-phase sub problem in the el2p coupled problem
CTwoPTestProblem	The incompressible 2p-boxdfm test problem
CTwoPTestProblemAdaptive	Soil contamination problem where DNAPL infiltrates a fully water saturated medium
CTwoPTestSpatialParams	The spatial params for the incompressible 2p test
CTwoPTracerTestProblem	A 2p problem with multiple tracer bands in a porous groundwater reservoir with a lens
CTwoPTracerTestSpatialParams	Definition of the spatial parameters for the tracer problem
CTwoPTwoCChemicalNonequilibriumProblem	Problem where air is injected in a unsaturated porous medium
CTwoPTwoCChemicalNonequilibriumSpatialParams	The spatial parameters for the 2p2c chemical nonequilibrium problem
CTwoPTwoCCO2PrimaryVariableSwitch	The primary variable switch for the 2p2c-CO2 model controlling the phase presence state variable
CTwoPTwoCCO2VolumeVariables	Contains the quantities which are are constant within a finite volume in the CO2 model
CTwoPTwoCCO2VolumeVariablesTraits	Traits class for the two-phase two-component CO2 model
CTwoPTwoCComparisonProblem	Problem where air is injected in a unsaturated porous medium
CTwoPTwoCComparisonSpatialParams	The spatial parameters for the 2p2c mpnc comparison problem
CTwoPTwoCMPNCIOFields	Adds I/O fields specific to the two-phase two-component model
CTwoPTwoCSpatialParams	The spatial parameters class for the test problem using the 1p cc model
CTwoPTwoCUnconstrainedModelTraits
CTwoPTwoCVolumeVariablesBase	Contains the quantities which are constant within a finite volume in the two-phase two-component model. This is the base class for a 2p2c model with and without chemical nonequilibrium
CTwoPTwoCVolumeVariablesImplementation
CTwoPTwoCVolumeVariablesImplementation< Traits, false, useConstraintSolver >	Contains the quantities which are constant within a finite volume in the two-phase two-component model. Specialization for chemical equilibrium
CTwoPTwoCVolumeVariablesImplementation< Traits, true, useConstraintSolver >	Contains the quantities which are constant within a finite volume in the two-phase two-component model. Specialization for chemical non-equilibrium. The equilibrium mole fraction is calculated using Henry's and Raoult's law
CTwoPVolumeVariables	Contains the quantities which are are constant within a finite volume in the two-phase model
CTwoPVolumeVariablesTraits	Traits class for the two-phase model
CUpwindSchemeImpl	Forward declaration of the upwind scheme implementation
CUpwindSchemeImpl< GridGeometry, DiscretizationMethod::box >	Upwind scheme for the box method
CUpwindSchemeImpl< GridGeometry, DiscretizationMethod::ccmpfa >	Upwind scheme for cell-centered mpfa schemes
CUpwindSchemeImpl< GridGeometry, DiscretizationMethod::cctpfa >	Upwind scheme for the cell-centered tpfa scheme
CVanGenuchten	Implementation of the van Genuchten capillary pressure <-> saturation relation. This class bundles the "raw" curves as static members and doesn't concern itself converting absolute to effective saturations and vice versa
CVanGenuchtenParams	Specification of the material parameters for the van Genuchten constitutive relations
CVariableClass	Base class holding the variables and discretized data for sequential models
►CVariableClass2P2CAdaptive	Class holding additionally mpfa data of adaptive compositional models
CmpfaData	Storage object for data related to the MPFA method
CVariableClassAdaptive	Base class holding the variables and discretized data for sequential models
CVariableLengthSpline_	The common code for all 3rd order polynomial splines with where the number of sampling points only known at run-time
CVectorConverter	A helper classe that converts a Dune::MultiTypeBlockVector into a plain Dune::BlockVector and transfers back values
CVectorExchange	A data handle class to exchange entries of a vector
CVelocityOutput	Velocity output for implicit (porous media) models
CVertexEnrichmentHelper	Specialization of the enrichment helper class for 2d grids. In this case, we look for two-dimensional bulk grid elements that are enclosed by (lie in between) two 1-dimensional facet grid elements
CVertexHandleMax	Data handle for parallel communication which takes the maximum of all values that are attached to vertices
CVertexHandleMin	Provides data handle for parallel communication which takes the minimum of all values that are attached to vertices
CVertexHandleNonZeroMin	Data handle for parallel communication which takes the minimum non-zero values that are attached to vertices
CVertexHandleSum	Data handle for parallel communication which sums up all values are attached to vertices
CVtkMultiWriter	Simplifies writing multi-file VTK datasets
CVtkNestedFunction	Provides a vector-valued function using Dune::FieldVectors as elements
CVtkOutputModule	A VTK output module to simplify writing dumux simulation data to VTK format
CVTKReader	A vtk file reader using tinyxml2 as xml backend
CVTKSequenceWriter	Base class to write pvd-files which contains a list of all collected vtk-files. This is a modified version of DUNE's pvd writer which takes a VTKWriter as template argument making it more general
CWaterAirProblem	Non-isothermal gas injection problem where a gas (e.g. air) is injected into a fully water saturated medium
CWaterAirSpatialParams	Definition of the spatial parameters for the water-air problem
CZeroEqVolumeVariables	Volume variables for the single-phase 0-Eq. model
CcheckGasDen
CcheckGasEnth
CcheckGasHeatCap
CcheckGasThermCond
CcheckGasVisc
CcheckIonCharge
CcheckLiqDen	Helper structs for detecting if a component has certain functions overloaded
CcheckLiqEnth
CcheckLiqHeatCap
CcheckLiqThermCond
CcheckLiqVisc
CcheckSolDen
CcheckSolHeatCap
CcheckSolThermCond
CCircleSelector	A method providing an () operator in order to select elements for a subgrid
CL2NormData	Container to store the L2 errors
CMpfaGridGeometryTraits	Helper class to define the MpfaFVGridGeometry
CSolutionStorage
CTestTraits
CUniformDistributedRandomNumber