Definition of the spatial parameters for non-equilibrium. More...

#include <dumux/material/spatialparams/fvnonequilibrium.hh>

Inheritance diagram for Dumux::FVNonEquilibriumSpatialParams< GridGeometry, Scalar, Implementation >:

Description

template<class GridGeometry, class Scalar, class Implementation>
class Dumux::FVNonEquilibriumSpatialParams< GridGeometry, Scalar, Implementation >

Definition of the spatial parameters for non-equilibrium.

Public Types
using	AwnSurfaceParams = Scalar
	export the types used for interfacial area calculations More...

using	AwsSurfaceParams = Scalar

using	AnsSurfaceParams = Scalar

Public Member Functions
	FVNonEquilibriumSpatialParams (std::shared_ptr< const GridGeometry > gridGeometry)

template<class ElementSolution >
const Scalar	characteristicLength (const Element &element, const SubControlVolume &scv, const ElementSolution &elemSol) const
	Return the characteristic length for the mass transfer. More...

const Scalar	characteristicLengthAtPos (const GlobalPosition &globalPos) const
	Return the characteristic length for the mass transfer. More...

template<class ElementSolution >
const Scalar	factorEnergyTransfer (const Element &element, const SubControlVolume &scv, const ElementSolution &elemSol) const
	Return the pre-factor the the energy transfer. More...

const Scalar	factorEnergyTransferAtPos (const GlobalPosition &globalPos) const
	Return the pre factor the the energy transfer. More...

template<class ElementSolution >
const Scalar	factorMassTransfer (const Element &element, const SubControlVolume &scv, const ElementSolution &elemSol) const
	Return the pre-factor the the mass transfer. More...

const Scalar	factorMassTransferAtPos (const GlobalPosition &globalPos) const
	Return the pre-factor the the mass transfer. More...

template<class ElementSolution >
decltype(auto)	materialLawParams (const Element &element, const SubControlVolume &scv, const ElementSolution &elemSol) const
	Function for defining the parameters needed by constitutive relationships (kr-sw, pc-sw, etc.). More...

template<class FluidSystem , class ElementSolution >
int	wettingPhase (const Element &element, const SubControlVolume &scv, const ElementSolution &elemSol) const
	Function for defining which phase is to be considered as the wetting phase. More...

template<class FluidSystem >
int	wettingPhaseAtPos (const GlobalPosition &globalPos) const
	Function for defining which phase is to be considered as the wetting phase. More...

const GlobalPosition &	gravity (const GlobalPosition &pos) const
	Returns the acceleration due to gravity \(\mathrm{[m/s^2]}\). More...

Scalar	harmonicMean (const Scalar T1, const Scalar T2, const GlobalPosition &normal) const
	Harmonic average of a discontinuous scalar field at discontinuity interface (for compatibility reasons with the function below) More...

DimWorldMatrix	harmonicMean (const DimWorldMatrix &T1, const DimWorldMatrix &T2, const GlobalPosition &normal) const
	Harmonic average of a discontinuous tensorial field at discontinuity interface. More...

template<class ElementSolution >
decltype(auto)	permeability (const Element &element, const SubControlVolume &scv, const ElementSolution &elemSol) const
	Function for defining the (intrinsic) permeability \([m^2]\). More...

template<class ElementSolution >
Scalar	porosity (const Element &element, const SubControlVolume &scv, const ElementSolution &elemSol) const
	Function for defining the porosity. That is possibly solution dependent. More...

template<class SolidSystem , class ElementSolution , typename std::enable_if_t< SolidSystem::isInert() &&SolidSystem::numInertComponents==1 &&!decltype(isValid(Detail::hasInertVolumeFractionAtPos< GlobalPosition, SolidSystem >())(std::declval< Implementation >()))::value, int > = 0>
Scalar	inertVolumeFraction (const Element &element, const SubControlVolume &scv, const ElementSolution &elemSol, int compIdx) const
	Function for defining the solid volume fraction. That is possibly solution dependent. More...

template<class SolidSystem , class ElementSolution , typename std::enable_if_t< SolidSystem::numInertComponents==0, int > = 0>
Scalar	inertVolumeFraction (const Element &element, const SubControlVolume &scv, const ElementSolution &elemSol, int compIdx) const

template<class SolidSystem , class ElementSolution , typename std::enable_if_t<(SolidSystem::numInertComponents > 1)\|\|((SolidSystem::numInertComponents > 0) &&(!SolidSystem::isInert()\|\|decltype(isValid(Detail::hasInertVolumeFractionAtPos< GlobalPosition, SolidSystem >())(std::declval< Implementation >()))::value)), int > = 0>
Scalar	inertVolumeFraction (const Element &element, const SubControlVolume &scv, const ElementSolution &elemSol, int compIdx) const

Scalar	beaversJosephCoeffAtPos (const GlobalPosition &globalPos) const
	Function for defining the Beavers-Joseph coefficient for multidomain problems \(\mathrm{[-]}\). More...

Scalar	forchCoeff (const SubControlVolumeFace &scvf) const
	Apply the Forchheimer coefficient for inertial forces calculation. More...

const GridGeometry &	fvGridGeometry () const
	The finite volume grid geometry. More...

const GridGeometry &	gridGeometry () const
	The finite volume grid geometry. More...

Static Public Member Functions
static constexpr bool	evaluatePermeabilityAtScvfIP ()
	If the permeability should be evaluated directly at the scvf integration point (for convergence tests with analytical and continuous perm functions) or is evaluated at the scvs (for permeability fields with discontinuities) -> default. More...

Protected Member Functions
Implementation &	asImp_ ()

const Implementation &	asImp_ () const

Member Typedef Documentation

◆ AnsSurfaceParams

template<class GridGeometry , class Scalar , class Implementation >

using Dumux::FVNonEquilibriumSpatialParams< GridGeometry, Scalar, Implementation >::AnsSurfaceParams = Scalar

◆ AwnSurfaceParams

template<class GridGeometry , class Scalar , class Implementation >

using Dumux::FVNonEquilibriumSpatialParams< GridGeometry, Scalar, Implementation >::AwnSurfaceParams = Scalar

export the types used for interfacial area calculations

◆ AwsSurfaceParams

template<class GridGeometry , class Scalar , class Implementation >

using Dumux::FVNonEquilibriumSpatialParams< GridGeometry, Scalar, Implementation >::AwsSurfaceParams = Scalar

Constructor & Destructor Documentation

◆ FVNonEquilibriumSpatialParams()

template<class GridGeometry , class Scalar , class Implementation >

Dumux::FVNonEquilibriumSpatialParams< GridGeometry, Scalar, Implementation >::FVNonEquilibriumSpatialParams ( std::shared_ptr< const GridGeometry > gridGeometry )

inline

Member Function Documentation

◆ asImp_() [1/2]

template<class GridGeometry , class Scalar , class Implementation >

Implementation & Dumux::FVSpatialParamsOneP< GridGeometry, Scalar, Implementation >::asImp_ ( )

inlineprotectedinherited

◆ asImp_() [2/2]

template<class GridGeometry , class Scalar , class Implementation >

const Implementation & Dumux::FVSpatialParamsOneP< GridGeometry, Scalar, Implementation >::asImp_ ( ) const

inlineprotectedinherited

◆ beaversJosephCoeffAtPos()

template<class GridGeometry , class Scalar , class Implementation >

Scalar Dumux::FVSpatialParamsOneP< GridGeometry, Scalar, Implementation >::beaversJosephCoeffAtPos ( const GlobalPosition & globalPos ) const

inlineinherited

Function for defining the Beavers-Joseph coefficient for multidomain problems \(\mathrm{[-]}\).

Returns: Beavers-Joseph coefficient \(\mathrm{[-]}\)

Parameters

globalPos The global position

◆ characteristicLength()

template<class GridGeometry , class Scalar , class Implementation >

template<class ElementSolution >

const Scalar Dumux::FVNonEquilibriumSpatialParams< GridGeometry, Scalar, Implementation >::characteristicLength	(	const Element &	element,
		const SubControlVolume &	scv,
		const ElementSolution &	elemSol
	)		const

inline

Return the characteristic length for the mass transfer.

The position is determined based on the coordinate of the vertex belonging to the considered sub control volume.

◆ characteristicLengthAtPos()

template<class GridGeometry , class Scalar , class Implementation >

const Scalar Dumux::FVNonEquilibriumSpatialParams< GridGeometry, Scalar, Implementation >::characteristicLengthAtPos ( const GlobalPosition & globalPos ) const

inline

Return the characteristic length for the mass transfer.

Parameters

globalPos The position in global coordinates.

◆ evaluatePermeabilityAtScvfIP()

template<class GridGeometry , class Scalar , class Implementation >

static constexpr bool Dumux::FVSpatialParamsOneP< GridGeometry, Scalar, Implementation >::evaluatePermeabilityAtScvfIP ( )

inlinestaticconstexprinherited

If the permeability should be evaluated directly at the scvf integration point (for convergence tests with analytical and continuous perm functions) or is evaluated at the scvs (for permeability fields with discontinuities) -> default.

◆ factorEnergyTransfer()

template<class GridGeometry , class Scalar , class Implementation >

template<class ElementSolution >

const Scalar Dumux::FVNonEquilibriumSpatialParams< GridGeometry, Scalar, Implementation >::factorEnergyTransfer	(	const Element &	element,
		const SubControlVolume &	scv,
		const ElementSolution &	elemSol
	)		const

inline

Return the pre-factor the the energy transfer.

The position is determined based on the coordinate of the vertex belonging to the considered sub control volume.

◆ factorEnergyTransferAtPos()

template<class GridGeometry , class Scalar , class Implementation >

const Scalar Dumux::FVNonEquilibriumSpatialParams< GridGeometry, Scalar, Implementation >::factorEnergyTransferAtPos ( const GlobalPosition & globalPos ) const

inline

Return the pre factor the the energy transfer.

Parameters

globalPos The position in global coordinates.

◆ factorMassTransfer()

template<class GridGeometry , class Scalar , class Implementation >

template<class ElementSolution >

const Scalar Dumux::FVNonEquilibriumSpatialParams< GridGeometry, Scalar, Implementation >::factorMassTransfer	(	const Element &	element,
		const SubControlVolume &	scv,
		const ElementSolution &	elemSol
	)		const

inline

Return the pre-factor the the mass transfer.

The position is determined based on the coordinate of the vertex belonging to the considered sub control volume.

◆ factorMassTransferAtPos()

template<class GridGeometry , class Scalar , class Implementation >

const Scalar Dumux::FVNonEquilibriumSpatialParams< GridGeometry, Scalar, Implementation >::factorMassTransferAtPos ( const GlobalPosition & globalPos ) const

inline

Return the pre-factor the the mass transfer.

Parameters

globalPos The position in global coordinates.

◆ forchCoeff()

template<class GridGeometry , class Scalar , class Implementation >

Scalar Dumux::FVSpatialParamsOneP< GridGeometry, Scalar, Implementation >::forchCoeff ( const SubControlVolumeFace & scvf ) const

inlineinherited

Apply the Forchheimer coefficient for inertial forces calculation.

Parameters

scvf	The sub-control volume face where the intrinsic velocity ought to be calculated.

◆ fvGridGeometry()

template<class GridGeometry , class Scalar , class Implementation >

const GridGeometry & Dumux::FVSpatialParamsOneP< GridGeometry, Scalar, Implementation >::fvGridGeometry ( ) const

inlineinherited

The finite volume grid geometry.

◆ gravity()

template<class GridGeometry , class Scalar , class Implementation >

const GlobalPosition & Dumux::FVSpatialParamsOneP< GridGeometry, Scalar, Implementation >::gravity ( const GlobalPosition & pos ) const

inlineinherited

Returns the acceleration due to gravity \(\mathrm{[m/s^2]}\).

The default behaviour is a constant gravity vector; if the Problem.EnableGravity parameter is true, \(\boldsymbol{g} = ( 0,\dots,\ -9.81)^T \), else \(\boldsymbol{g} = ( 0,\dots, 0)^T \).

Parameters

pos	the spatial position at which to evaulate the gravity vector

◆ gridGeometry()

template<class GridGeometry , class Scalar , class Implementation >

const GridGeometry & Dumux::FVSpatialParamsOneP< GridGeometry, Scalar, Implementation >::gridGeometry ( ) const

inlineinherited

The finite volume grid geometry.

◆ harmonicMean() [1/2]

template<class GridGeometry , class Scalar , class Implementation >

DimWorldMatrix Dumux::FVSpatialParamsOneP< GridGeometry, Scalar, Implementation >::harmonicMean	(	const DimWorldMatrix &	T1,
		const DimWorldMatrix &	T2,
		const GlobalPosition &	normal
	)		const

inlineinherited

Harmonic average of a discontinuous tensorial field at discontinuity interface.

Note: We do a harmonic average of the part normal to the interface (alpha*I) and an arithmetic average of the tangential part (T - alpha*I).

Returns: the averaged tensor

Parameters

T1	first tensor
T2	second tensor
normal	The unit normal vector of the interface

◆ harmonicMean() [2/2]

template<class GridGeometry , class Scalar , class Implementation >

Scalar Dumux::FVSpatialParamsOneP< GridGeometry, Scalar, Implementation >::harmonicMean	(	const Scalar	T1,
		const Scalar	T2,
		const GlobalPosition &	normal
	)		const

inlineinherited

Harmonic average of a discontinuous scalar field at discontinuity interface (for compatibility reasons with the function below)

Returns: the averaged scalar

Parameters

T1	first scalar parameter
T2	second scalar parameter
normal	The unit normal vector of the interface

◆ inertVolumeFraction() [1/3]

template<class GridGeometry , class Scalar , class Implementation >

template<class SolidSystem , class ElementSolution , typename std::enable_if_t< SolidSystem::isInert() &&SolidSystem::numInertComponents==1 &&!decltype(isValid(Detail::hasInertVolumeFractionAtPos< GlobalPosition, SolidSystem >())(std::declval< Implementation >()))::value, int > = 0>

Scalar Dumux::FVSpatialParamsOneP< GridGeometry, Scalar, Implementation >::inertVolumeFraction	(	const Element &	element,
		const SubControlVolume &	scv,
		const ElementSolution &	elemSol,
		int	compIdx
	)		const

inlineinherited

Function for defining the solid volume fraction. That is possibly solution dependent.

Parameters

element	The current element
scv	The sub-control volume inside the element.
elemSol	The solution at the dofs connected to the element.
compIdx	The solid component index

Returns: the volume fraction of the inert solid component with index compIdx

Note: this overload is enable if there is only one inert solid component and the user didn't choose to implement a inertVolumeFractionAtPos overload. It then forwards to the simpler porosity interface. With more than one solid components or active solid components (i.e. dissolution) please overload the more general inertVolumeFraction/inertVolumeFractionAtPos interface.

◆ inertVolumeFraction() [2/3]

template<class GridGeometry , class Scalar , class Implementation >

template<class SolidSystem , class ElementSolution , typename std::enable_if_t< SolidSystem::numInertComponents==0, int > = 0>

Scalar Dumux::FVSpatialParamsOneP< GridGeometry, Scalar, Implementation >::inertVolumeFraction	(	const Element &	element,
		const SubControlVolume &	scv,
		const ElementSolution &	elemSol,
		int	compIdx
	)		const

inlineinherited

◆ inertVolumeFraction() [3/3]

template<class GridGeometry , class Scalar , class Implementation >

template<class SolidSystem , class ElementSolution , typename std::enable_if_t<(SolidSystem::numInertComponents > 1)||((SolidSystem::numInertComponents > 0) &&(!SolidSystem::isInert()||decltype(isValid(Detail::hasInertVolumeFractionAtPos< GlobalPosition, SolidSystem >())(std::declval< Implementation >()))::value)), int > = 0>

Scalar Dumux::FVSpatialParamsOneP< GridGeometry, Scalar, Implementation >::inertVolumeFraction	(	const Element &	element,
		const SubControlVolume &	scv,
		const ElementSolution &	elemSol,
		int	compIdx
	)		const

inlineinherited

◆ materialLawParams()

template<class GridGeometry , class Scalar , class Implementation >

template<class ElementSolution >

decltype(auto) Dumux::FVSpatialParams< GridGeometry, Scalar, Implementation >::materialLawParams	(	const Element &	element,
		const SubControlVolume &	scv,
		const ElementSolution &	elemSol
	)		const

inlineinherited

Function for defining the parameters needed by constitutive relationships (kr-sw, pc-sw, etc.).

Parameters

element	The current element
scv	The sub-control volume inside the element.
elemSol	The solution at the dofs connected to the element.

Returns: the material parameters object

◆ permeability()

template<class GridGeometry , class Scalar , class Implementation >

template<class ElementSolution >

decltype(auto) Dumux::FVSpatialParamsOneP< GridGeometry, Scalar, Implementation >::permeability	(	const Element &	element,
		const SubControlVolume &	scv,
		const ElementSolution &	elemSol
	)		const

inlineinherited

Function for defining the (intrinsic) permeability \([m^2]\).

Note: It is possibly solution dependent.

Parameters

element	The current element
scv	The sub-control volume inside the element.
elemSol	The solution at the dofs connected to the element.

Returns: permeability

◆ porosity()

template<class GridGeometry , class Scalar , class Implementation >

template<class ElementSolution >

Scalar Dumux::FVSpatialParamsOneP< GridGeometry, Scalar, Implementation >::porosity	(	const Element &	element,
		const SubControlVolume &	scv,
		const ElementSolution &	elemSol
	)		const

inlineinherited

Function for defining the porosity. That is possibly solution dependent.

Note: this can only be used for solids with one inert component (see inertVolumeFraction for the more general interface)

Parameters

element	The current element
scv	The sub-control volume inside the element.
elemSol	The solution at the dofs connected to the element.

Returns: the porosity

◆ wettingPhase()

template<class GridGeometry , class Scalar , class Implementation >

template<class FluidSystem , class ElementSolution >

int Dumux::FVSpatialParams< GridGeometry, Scalar, Implementation >::wettingPhase	(	const Element &	element,
		const SubControlVolume &	scv,
		const ElementSolution &	elemSol
	)		const

inlineinherited

Function for defining which phase is to be considered as the wetting phase.

Parameters

element	The current element
scv	The sub-control volume inside the element.
elemSol	The solution at the dofs connected to the element.

Returns: the wetting phase index

◆ wettingPhaseAtPos()

template<class GridGeometry , class Scalar , class Implementation >

template<class FluidSystem >

int Dumux::FVSpatialParams< GridGeometry, Scalar, Implementation >::wettingPhaseAtPos ( const GlobalPosition & globalPos ) const

inlineinherited

Function for defining which phase is to be considered as the wetting phase.

Returns: the wetting phase index

Parameters

globalPos The global position

The documentation for this class was generated from the following file:

fvnonequilibrium.hh

Description

Public Types

Public Member Functions

Static Public Member Functions

Protected Member Functions

Member Typedef Documentation

◆ AnsSurfaceParams

◆ AwnSurfaceParams

◆ AwsSurfaceParams

Constructor & Destructor Documentation

◆ FVNonEquilibriumSpatialParams()

Member Function Documentation

◆ asImp_() [1/2]

◆ asImp_() [2/2]

◆ beaversJosephCoeffAtPos()

◆ characteristicLength()

◆ characteristicLengthAtPos()

◆ evaluatePermeabilityAtScvfIP()

◆ factorEnergyTransfer()

◆ factorEnergyTransferAtPos()

◆ factorMassTransfer()

◆ factorMassTransferAtPos()

◆ forchCoeff()

◆ fvGridGeometry()

◆ gravity()

◆ gridGeometry()

◆ harmonicMean() [1/2]

◆ harmonicMean() [2/2]

◆ inertVolumeFraction() [1/3]

◆ inertVolumeFraction() [2/3]

◆ inertVolumeFraction() [3/3]

◆ materialLawParams()

◆ permeability()

◆ porosity()

◆ wettingPhase()

◆ wettingPhaseAtPos()