Spatial parameters for the dissolution problem where water is injected in a for flushing precipitated salt clogging a gas reservoir. More...

#include <test/porousmediumflow/2pncmin/implicit/isothermal/spatialparams.hh>

Inheritance diagram for Dumux::DissolutionSpatialParams< GridGeometry, Scalar >:

Description

template<class GridGeometry, class Scalar>
class Dumux::DissolutionSpatialParams< GridGeometry, Scalar >

Spatial parameters for the dissolution problem where water is injected in a for flushing precipitated salt clogging a gas reservoir.

Public Types
using	PermeabilityType = Scalar

using	MaterialLaw = EffToAbsLaw< EffectiveLaw >
	Export the material law type used. More...

using	MaterialLawParams = typename MaterialLaw::Params

Public Member Functions
	DissolutionSpatialParams (std::shared_ptr< const GridGeometry > gridGeometry)

Scalar	minimalPorosity (const Element &element, const SubControlVolume &scv) const
	Defines the minimum porosity \([-]\) distribution. More...

template<class SolidSystem >
Scalar	inertVolumeFractionAtPos (const GlobalPosition &globalPos, int compIdx) const
	Defines the volume fraction of the inert component. More...

Scalar	referencePorosity (const Element &element, const SubControlVolume &scv) const
	Defines the reference porosity \([-]\) distribution. More...

template<class ElementSolution >
PermeabilityType	permeability (const Element &element, const SubControlVolume &scv, const ElementSolution &elemSol) const

Scalar	solubilityLimit () const

Scalar	theta (const SubControlVolume &scv) const

const MaterialLawParams &	materialLawParamsAtPos (const GlobalPosition &globalPos) const

template<class FluidSystem >
int	wettingPhaseAtPos (const GlobalPosition &globalPos) const

decltype(auto)	materialLawParams (const Element &element, const SubControlVolume &scv, const ElementSolution &elemSol) const
	Function for defining the parameters needed by constitutive relationships (kr-sw, pc-sw, etc.). More...

int	wettingPhase (const Element &element, const SubControlVolume &scv, const ElementSolution &elemSol) const
	Function for defining which phase is to be considered as the wetting phase. More...

int	wettingPhaseAtPos (const GlobalPosition &globalPos) const
	Function for defining which phase is to be considered as the wetting phase. More...

const GlobalPosition &	gravity (const GlobalPosition &pos) const
	Returns the acceleration due to gravity \(\mathrm{[m/s^2]}\). More...

Scalar	harmonicMean (const Scalar T1, const Scalar T2, const GlobalPosition &normal) const
	Harmonic average of a discontinuous scalar field at discontinuity interface (for compatibility reasons with the function below) More...

DimWorldMatrix	harmonicMean (const DimWorldMatrix &T1, const DimWorldMatrix &T2, const GlobalPosition &normal) const
	Harmonic average of a discontinuous tensorial field at discontinuity interface. More...

decltype(auto)	permeability (const Element &element, const SubControlVolume &scv, const ElementSolution &elemSol) const
	Function for defining the (intrinsic) permeability \([m^2]\). More...

Scalar	porosity (const Element &element, const SubControlVolume &scv, const ElementSolution &elemSol) const
	Function for defining the porosity. That is possibly solution dependent. More...

Scalar	inertVolumeFraction (const Element &element, const SubControlVolume &scv, const ElementSolution &elemSol, int compIdx) const
	Function for defining the solid volume fraction. That is possibly solution dependent. More...

Scalar	inertVolumeFraction (const Element &element, const SubControlVolume &scv, const ElementSolution &elemSol, int compIdx) const

Scalar	inertVolumeFraction (const Element &element, const SubControlVolume &scv, const ElementSolution &elemSol, int compIdx) const

Scalar	beaversJosephCoeffAtPos (const GlobalPosition &globalPos) const
	Function for defining the Beavers-Joseph coefficient for multidomain problems \(\mathrm{[-]}\). More...

Scalar	forchCoeff (const SubControlVolumeFace &scvf) const
	Apply the Forchheimer coefficient for inertial forces calculation. More...

const GridGeometry &	fvGridGeometry () const
	The finite volume grid geometry. More...

const GridGeometry &	gridGeometry () const
	The finite volume grid geometry. More...

Static Public Member Functions
static constexpr bool	evaluatePermeabilityAtScvfIP ()
	If the permeability should be evaluated directly at the scvf integration point (for convergence tests with analytical and continuous perm functions) or is evaluated at the scvs (for permeability fields with discontinuities) -> default. More...

Protected Member Functions
DissolutionSpatialParams< GridGeometry, Scalar > &	asImp_ ()

const DissolutionSpatialParams< GridGeometry, Scalar > &	asImp_ () const

Member Typedef Documentation

◆ MaterialLaw

template<class GridGeometry , class Scalar >

using Dumux::DissolutionSpatialParams< GridGeometry, Scalar >::MaterialLaw = EffToAbsLaw<EffectiveLaw>

Export the material law type used.

◆ MaterialLawParams

template<class GridGeometry , class Scalar >

using Dumux::DissolutionSpatialParams< GridGeometry, Scalar >::MaterialLawParams = typename MaterialLaw::Params

◆ PermeabilityType

template<class GridGeometry , class Scalar >

using Dumux::DissolutionSpatialParams< GridGeometry, Scalar >::PermeabilityType = Scalar

Constructor & Destructor Documentation

◆ DissolutionSpatialParams()

template<class GridGeometry , class Scalar >

Dumux::DissolutionSpatialParams< GridGeometry, Scalar >::DissolutionSpatialParams ( std::shared_ptr< const GridGeometry > gridGeometry )

inline

Member Function Documentation

◆ asImp_() [1/2]

DissolutionSpatialParams< GridGeometry, Scalar > & Dumux::FVSpatialParamsOneP< GridGeometry, Scalar, DissolutionSpatialParams< GridGeometry, Scalar > >::asImp_ ( )

inlineprotectedinherited

◆ asImp_() [2/2]

const DissolutionSpatialParams< GridGeometry, Scalar > & Dumux::FVSpatialParamsOneP< GridGeometry, Scalar, DissolutionSpatialParams< GridGeometry, Scalar > >::asImp_ ( ) const

inlineprotectedinherited

◆ beaversJosephCoeffAtPos()

Scalar Dumux::FVSpatialParamsOneP< GridGeometry, Scalar, DissolutionSpatialParams< GridGeometry, Scalar > >::beaversJosephCoeffAtPos ( const GlobalPosition & globalPos ) const

inlineinherited

Function for defining the Beavers-Joseph coefficient for multidomain problems \(\mathrm{[-]}\).

Returns: Beavers-Joseph coefficient \(\mathrm{[-]}\)

Parameters

globalPos The global position

◆ evaluatePermeabilityAtScvfIP()

static constexpr bool Dumux::FVSpatialParamsOneP< GridGeometry, Scalar, DissolutionSpatialParams< GridGeometry, Scalar > >::evaluatePermeabilityAtScvfIP ( )

inlinestaticconstexprinherited

If the permeability should be evaluated directly at the scvf integration point (for convergence tests with analytical and continuous perm functions) or is evaluated at the scvs (for permeability fields with discontinuities) -> default.

◆ forchCoeff()

Scalar Dumux::FVSpatialParamsOneP< GridGeometry, Scalar, DissolutionSpatialParams< GridGeometry, Scalar > >::forchCoeff ( const SubControlVolumeFace & scvf ) const

inlineinherited

Apply the Forchheimer coefficient for inertial forces calculation.

Parameters

scvf	The sub-control volume face where the intrinsic velocity ought to be calculated.

◆ fvGridGeometry()

const GridGeometry & Dumux::FVSpatialParamsOneP< GridGeometry, Scalar, DissolutionSpatialParams< GridGeometry, Scalar > >::fvGridGeometry ( ) const

inlineinherited

The finite volume grid geometry.

◆ gravity()

const GlobalPosition & Dumux::FVSpatialParamsOneP< GridGeometry, Scalar, DissolutionSpatialParams< GridGeometry, Scalar > >::gravity ( const GlobalPosition & pos ) const

inlineinherited

Returns the acceleration due to gravity \(\mathrm{[m/s^2]}\).

The default behaviour is a constant gravity vector; if the Problem.EnableGravity parameter is true, \(\boldsymbol{g} = ( 0,\dots,\ -9.81)^T \), else \(\boldsymbol{g} = ( 0,\dots, 0)^T \).

Parameters

pos	the spatial position at which to evaulate the gravity vector

◆ gridGeometry()

const GridGeometry & Dumux::FVSpatialParamsOneP< GridGeometry, Scalar, DissolutionSpatialParams< GridGeometry, Scalar > >::gridGeometry ( ) const

inlineinherited

The finite volume grid geometry.

◆ harmonicMean() [1/2]

DimWorldMatrix Dumux::FVSpatialParamsOneP< GridGeometry, Scalar, DissolutionSpatialParams< GridGeometry, Scalar > >::harmonicMean	(	const DimWorldMatrix &	T1,
		const DimWorldMatrix &	T2,
		const GlobalPosition &	normal
	)		const

inlineinherited

Harmonic average of a discontinuous tensorial field at discontinuity interface.

Note: We do a harmonic average of the part normal to the interface (alpha*I) and an arithmetic average of the tangential part (T - alpha*I).

Returns: the averaged tensor

Parameters

T1	first tensor
T2	second tensor
normal	The unit normal vector of the interface

◆ harmonicMean() [2/2]

Scalar Dumux::FVSpatialParamsOneP< GridGeometry, Scalar, DissolutionSpatialParams< GridGeometry, Scalar > >::harmonicMean	(	const Scalar	T1,
		const Scalar	T2,
		const GlobalPosition &	normal
	)		const

inlineinherited

Harmonic average of a discontinuous scalar field at discontinuity interface (for compatibility reasons with the function below)

Returns: the averaged scalar

Parameters

T1	first scalar parameter
T2	second scalar parameter
normal	The unit normal vector of the interface

◆ inertVolumeFraction() [1/3]

Scalar Dumux::FVSpatialParamsOneP< GridGeometry, Scalar, DissolutionSpatialParams< GridGeometry, Scalar > >::inertVolumeFraction	(	const Element &	element,
		const SubControlVolume &	scv,
		const ElementSolution &	elemSol,
		int	compIdx
	)		const

inlineinherited

Function for defining the solid volume fraction. That is possibly solution dependent.

Parameters

element	The current element
scv	The sub-control volume inside the element.
elemSol	The solution at the dofs connected to the element.
compIdx	The solid component index

Returns: the volume fraction of the inert solid component with index compIdx

Note: this overload is enable if there is only one inert solid component and the user didn't choose to implement a inertVolumeFractionAtPos overload. It then forwards to the simpler porosity interface. With more than one solid components or active solid components (i.e. dissolution) please overload the more general inertVolumeFraction/inertVolumeFractionAtPos interface.

◆ inertVolumeFraction() [2/3]

Scalar Dumux::FVSpatialParamsOneP< GridGeometry, Scalar, DissolutionSpatialParams< GridGeometry, Scalar > >::inertVolumeFraction	(	const Element &	element,
		const SubControlVolume &	scv,
		const ElementSolution &	elemSol,
		int	compIdx
	)		const

inlineinherited

◆ inertVolumeFraction() [3/3]

Scalar Dumux::FVSpatialParamsOneP< GridGeometry, Scalar, DissolutionSpatialParams< GridGeometry, Scalar > >::inertVolumeFraction	(	const Element &	element,
		const SubControlVolume &	scv,
		const ElementSolution &	elemSol,
		int	compIdx
	)		const

inlineinherited

◆ inertVolumeFractionAtPos()

template<class GridGeometry , class Scalar >

template<class SolidSystem >

Scalar Dumux::DissolutionSpatialParams< GridGeometry, Scalar >::inertVolumeFractionAtPos	(	const GlobalPosition &	globalPos,
		int	compIdx
	)		const

inline

Defines the volume fraction of the inert component.

Parameters

globalPos	The global position in the domain
compIdx	The index of the inert solid component

◆ materialLawParams()

decltype(auto) Dumux::FVSpatialParams< GridGeometry, Scalar, DissolutionSpatialParams< GridGeometry, Scalar > >::materialLawParams	(	const Element &	element,
		const SubControlVolume &	scv,
		const ElementSolution &	elemSol
	)		const

inlineinherited

Function for defining the parameters needed by constitutive relationships (kr-sw, pc-sw, etc.).

Parameters

element	The current element
scv	The sub-control volume inside the element.
elemSol	The solution at the dofs connected to the element.

Returns: the material parameters object

◆ materialLawParamsAtPos()

template<class GridGeometry , class Scalar >

const MaterialLawParams & Dumux::DissolutionSpatialParams< GridGeometry, Scalar >::materialLawParamsAtPos ( const GlobalPosition & globalPos ) const

inline

◆ minimalPorosity()

template<class GridGeometry , class Scalar >

Scalar Dumux::DissolutionSpatialParams< GridGeometry, Scalar >::minimalPorosity	(	const Element &	element,
		const SubControlVolume &	scv
	)		const

inline

Defines the minimum porosity \([-]\) distribution.

Parameters

element	The finite element
scv	The sub-control volume

◆ permeability() [1/2]

decltype(auto) Dumux::FVSpatialParamsOneP< GridGeometry, Scalar, DissolutionSpatialParams< GridGeometry, Scalar > >::permeability	(	const Element &	element,
		const SubControlVolume &	scv,
		const ElementSolution &	elemSol
	)		const

inlineinherited

Function for defining the (intrinsic) permeability \([m^2]\).

Note: It is possibly solution dependent.

Parameters

element	The current element
scv	The sub-control volume inside the element.
elemSol	The solution at the dofs connected to the element.

Returns: permeability

◆ permeability() [2/2]

template<class GridGeometry , class Scalar >

template<class ElementSolution >

PermeabilityType Dumux::DissolutionSpatialParams< GridGeometry, Scalar >::permeability	(	const Element &	element,
		const SubControlVolume &	scv,
		const ElementSolution &	elemSol
	)		const

inline

Intrinsic permeability tensor K \([m^2]\) depending on the position in the domain

Parameters

element	The finite volume element
scv	The sub-control volume
elemSol	The element solution

Solution dependent permeability function

◆ porosity()

Scalar Dumux::FVSpatialParamsOneP< GridGeometry, Scalar, DissolutionSpatialParams< GridGeometry, Scalar > >::porosity	(	const Element &	element,
		const SubControlVolume &	scv,
		const ElementSolution &	elemSol
	)		const

inlineinherited

Function for defining the porosity. That is possibly solution dependent.

Note: this can only be used for solids with one inert component (see inertVolumeFraction for the more general interface)

Parameters

element	The current element
scv	The sub-control volume inside the element.
elemSol	The solution at the dofs connected to the element.

Returns: the porosity

◆ referencePorosity()

template<class GridGeometry , class Scalar >

Scalar Dumux::DissolutionSpatialParams< GridGeometry, Scalar >::referencePorosity	(	const Element &	element,
		const SubControlVolume &	scv
	)		const

inline

Defines the reference porosity \([-]\) distribution.

This is the porosity of the porous medium without any of the considered solid phases.

Parameters

element	The finite element
scv	The sub-control volume

◆ solubilityLimit()

template<class GridGeometry , class Scalar >

Scalar Dumux::DissolutionSpatialParams< GridGeometry, Scalar >::solubilityLimit ( ) const

inline

◆ theta()

template<class GridGeometry , class Scalar >

Scalar Dumux::DissolutionSpatialParams< GridGeometry, Scalar >::theta ( const SubControlVolume & scv ) const

inline

◆ wettingPhase()

int Dumux::FVSpatialParams< GridGeometry, Scalar, DissolutionSpatialParams< GridGeometry, Scalar > >::wettingPhase	(	const Element &	element,
		const SubControlVolume &	scv,
		const ElementSolution &	elemSol
	)		const

inlineinherited

Function for defining which phase is to be considered as the wetting phase.

Parameters

element	The current element
scv	The sub-control volume inside the element.
elemSol	The solution at the dofs connected to the element.

Returns: the wetting phase index

◆ wettingPhaseAtPos() [1/2]

int Dumux::FVSpatialParams< GridGeometry, Scalar, DissolutionSpatialParams< GridGeometry, Scalar > >::wettingPhaseAtPos ( const GlobalPosition & globalPos ) const

inlineinherited

Function for defining which phase is to be considered as the wetting phase.

Returns: the wetting phase index

Parameters

globalPos The global position

◆ wettingPhaseAtPos() [2/2]

template<class GridGeometry , class Scalar >

template<class FluidSystem >

int Dumux::DissolutionSpatialParams< GridGeometry, Scalar >::wettingPhaseAtPos ( const GlobalPosition & globalPos ) const

inline

The documentation for this class was generated from the following file:

porousmediumflow/2pncmin/implicit/isothermal/spatialparams.hh

Description

Public Types

Public Member Functions

Static Public Member Functions

Protected Member Functions

Member Typedef Documentation

◆ MaterialLaw

◆ MaterialLawParams

◆ PermeabilityType

Constructor & Destructor Documentation

◆ DissolutionSpatialParams()

Member Function Documentation

◆ asImp_() [1/2]

◆ asImp_() [2/2]

◆ beaversJosephCoeffAtPos()

◆ evaluatePermeabilityAtScvfIP()

◆ forchCoeff()

◆ fvGridGeometry()

◆ gravity()

◆ gridGeometry()

◆ harmonicMean() [1/2]

◆ harmonicMean() [2/2]

◆ inertVolumeFraction() [1/3]

◆ inertVolumeFraction() [2/3]

◆ inertVolumeFraction() [3/3]

◆ inertVolumeFractionAtPos()

◆ materialLawParams()

◆ materialLawParamsAtPos()

◆ minimalPorosity()

◆ permeability() [1/2]

◆ permeability() [2/2]

◆ porosity()

◆ referencePorosity()

◆ solubilityLimit()

◆ theta()

◆ wettingPhase()

◆ wettingPhaseAtPos() [1/2]

◆ wettingPhaseAtPos() [2/2]