Forward declaration of the problem class. More...

#include <test/porousmediumflow/2p/implicit/nonisothermal/problem.hh>

Inheritance diagram for Dumux::InjectionProblem2PNI< TypeTag >:

Description

template<class TypeTag>
class Dumux::InjectionProblem2PNI< TypeTag >

Forward declaration of the problem class.

Non-isothermal gas injection problem where a gas (e.g. air) is injected into a fully water saturated medium.

During buoyancy driven upward migration the gas passes a high temperature area.

The domain is sized 60m times 40m. The rectangular area with the increased temperature (380K) starts at (20m, 5m) and ends at (30m, 35m).

For the mass conservation equation Neumann boundary conditions are used on the top, on the bottom and on the right of the domain, while Dirichlet conditions are applied on the left boundary. For the energy conservation equation Dirichlet boundary conditions are applied on all boundaries.

Gas is injected at the right boundary from 5m to 15m at a rate of 0.001kg/(s m), the remaining Neumann boundaries are no-flow boundaries.

At the Dirichlet boundaries a hydrostatic pressure, a gas saturation of zero and a geothermal temperature gradient of 0.03K/m are applied.

This problem uses the 2p and nonisothermal model.

To run the simulation execute the following line in shell: ./test_box2pni -parameterFile test_box2pni.input or ./test_cc2pni -parameterFile test_cc2pni.input

Public Types
using	SpatialParams = GetPropType< TypeTag, Properties::SpatialParams >
	Export spatial parameter type. More...

Public Member Functions
	InjectionProblem2PNI (std::shared_ptr< const GridGeometry > gridGeometry)

void	setName (const std::string &newName)
	Set the problem name. More...

Problem parameters
const std::string	name () const
	Returns the problem name. More...

NumEqVector	sourceAtPos (const GlobalPosition &globalPos) const
	Returns the source term. More...

Boundary conditions
BoundaryTypes	boundaryTypesAtPos (const GlobalPosition &globalPos) const
	Specifies which kind of boundary condition should be used for which equation on a given boundary segment. More...

PrimaryVariables	dirichletAtPos (const GlobalPosition &globalPos) const
	Evaluates the boundary conditions for a Dirichlet boundary segment. More...

NumEqVector	neumannAtPos (const GlobalPosition &globalPos) const
	Evaluates the boundary conditions for a Neumann boundary segment. More...

Volume terms
PrimaryVariables	initialAtPos (const GlobalPosition &globalPos) const
	Evaluates the initial values for a control volume. More...

Physical parameters for porous media problems
Scalar	temperatureAtPos (const GlobalPosition &globalPos) const
	Returns the temperature \(\mathrm{[K]}\) at a given global position. More...

Scalar	temperature () const
	Returns the temperature \(\mathrm{[K]}\) for an isothermal problem. More...

const GravityVector &	gravityAtPos (const GlobalPosition &pos) const
	Returns the acceleration due to gravity \(\mathrm{[m/s^2]}\). More...

const GravityVector &	gravity () const
	Returns the acceleration due to gravity \(\mathrm{[m/s^2]}\). More...

SpatialParams &	spatialParams ()
	Returns the spatial parameters object. More...

const SpatialParams &	spatialParams () const
	Returns the spatial parameters object. More...

GravityVector	gravity_
	The gravity acceleration vector. More...

std::shared_ptr< SpatialParams >	spatialParams_

Boundary conditions and sources defining the problem
BoundaryTypes	boundaryTypes (const Element &element, const SubControlVolume &scv) const
	Specifies which kind of boundary condition should be used for which equation on a given boundary segment. More...

BoundaryTypes	boundaryTypes (const Element &element, const SubControlVolumeFace &scvf) const
	Specifies which kind of boundary condition should be used for which equation on a given boundary segment. More...

PrimaryVariables	dirichlet (const Element &element, const SubControlVolumeFace &scvf) const
	Evaluate the boundary conditions for a dirichlet control volume face. More...

PrimaryVariables	dirichlet (const Element &element, const SubControlVolume &scv) const
	Evaluate the boundary conditions for a dirichlet control volume. More...

NumEqVector	neumann (const Element &element, const FVElementGeometry &fvGeometry, const ElementVolumeVariables &elemVolVars, const ElementFluxVariablesCache &elemFluxVarsCache, const SubControlVolumeFace &scvf) const
	Evaluate the boundary conditions for a neumann boundary segment. More...

NumEqVector	source (const Element &element, const FVElementGeometry &fvGeometry, const ElementVolumeVariables &elemVolVars, const SubControlVolume &scv) const
	Evaluate the source term for all phases within a given sub-control-volume. More...

void	addPointSources (std::vector< PointSource > &pointSources) const
	Applies a vector of point sources. The point sources are possibly solution dependent. More...

void	pointSource (PointSource &source, const Element &element, const FVElementGeometry &fvGeometry, const ElementVolumeVariables &elemVolVars, const SubControlVolume &scv) const
	Evaluate the point sources (added by addPointSources) for all phases within a given sub-control-volume. More...

void	pointSourceAtPos (PointSource &pointSource, const GlobalPosition &globalPos) const
	Evaluate the point sources (added by addPointSources) for all phases within a given sub-control-volume. More...

template<class MatrixBlock >
void	addSourceDerivatives (MatrixBlock &block, const Element &element, const FVElementGeometry &fvGeometry, const VolumeVariables &volVars, const SubControlVolume &scv) const
	Add source term derivative to the Jacobian. More...

NumEqVector	scvPointSources (const Element &element, const FVElementGeometry &fvGeometry, const ElementVolumeVariables &elemVolVars, const SubControlVolume &scv) const
	Adds contribution of point sources for a specific sub control volume to the values. Caution: Only overload this method in the implementation if you know what you are doing. More...

void	computePointSourceMap ()
	Compute the point source map, i.e. which scvs have point source contributions. More...

const PointSourceMap &	pointSourceMap () const
	Get the point source map. It stores the point sources per scv. More...

void	applyInitialSolution (SolutionVector &sol) const
	Applies the initial solution for all degrees of freedom of the grid. More...

template<class Entity >
PrimaryVariables	initial (const Entity &entity) const
	Evaluate the initial value for an element (for cell-centered models) or vertex (for box / vertex-centered models) More...

template<class ElementSolution >
Scalar	extrusionFactor (const Element &element, const SubControlVolume &scv, const ElementSolution &elemSol) const
	Return how much the domain is extruded at a given sub-control volume. More...

Scalar	extrusionFactorAtPos (const GlobalPosition &globalPos) const
	Return how much the domain is extruded at a given position. More...

const GridGeometry &	fvGridGeometry () const
	The finite volume grid geometry. More...

const GridGeometry &	gridGeometry () const
	The finite volume grid geometry. More...

const std::string &	paramGroup () const
	The parameter group in which to retrieve runtime parameters. More...

static constexpr bool	enableInternalDirichletConstraints ()
	If internal Dirichlet contraints are enabled Enables / disables internal (non-boundary) Dirichlet constraints. If this is overloaded to return true, the assembler calls problem.hasInternalDirichletConstraint(element, scv). This means you have to implement the following member function. More...

Implementation &	asImp_ ()
	Returns the implementation of the problem (i.e. static polymorphism) More...

const Implementation &	asImp_ () const
	Returns the implementation of the problem (i.e. static polymorphism) More...

Member Typedef Documentation

◆ SpatialParams

template<class TypeTag >

using Dumux::PorousMediumFlowProblem< TypeTag >::SpatialParams = GetPropType<TypeTag, Properties::SpatialParams>

inherited

Export spatial parameter type.

Constructor & Destructor Documentation

◆ InjectionProblem2PNI()

template<class TypeTag >

Dumux::InjectionProblem2PNI< TypeTag >::InjectionProblem2PNI ( std::shared_ptr< const GridGeometry > gridGeometry )

inline

Member Function Documentation

◆ addPointSources()

template<class TypeTag >

void Dumux::FVProblem< TypeTag >::addPointSources ( std::vector< PointSource > & pointSources ) const

inlineinherited

Applies a vector of point sources. The point sources are possibly solution dependent.

Parameters

pointSources A vector of PointSource s that contain source values for all phases and space positions.

For this method, the values method of the point source has to return the absolute rate values in units \( [ \textnormal{unit of conserved quantity} / s ] \). Positive values mean that the conserved quantity is created, negative ones mean that it vanishes. E.g. for the mass balance that would be a mass rate in \( [ kg / s ] \).

◆ addSourceDerivatives()

template<class TypeTag >

template<class MatrixBlock >

void Dumux::FVProblem< TypeTag >::addSourceDerivatives	(	MatrixBlock &	block,
		const Element &	element,
		const FVElementGeometry &	fvGeometry,
		const VolumeVariables &	volVars,
		const SubControlVolume &	scv
	)		const

inlineinherited

Add source term derivative to the Jacobian.

Note: Only needed in case of analytic differentiation and solution dependent sources

◆ applyInitialSolution()

template<class TypeTag >

void Dumux::FVProblem< TypeTag >::applyInitialSolution ( SolutionVector & sol ) const

inlineinherited

Applies the initial solution for all degrees of freedom of the grid.

Parameters

sol	the initial solution vector

◆ asImp_() [1/2]

template<class TypeTag >

Implementation & Dumux::FVProblem< TypeTag >::asImp_ ( )

inlineprotectedinherited

Returns the implementation of the problem (i.e. static polymorphism)

◆ asImp_() [2/2]

template<class TypeTag >

const Implementation & Dumux::FVProblem< TypeTag >::asImp_ ( ) const

inlineprotectedinherited

Returns the implementation of the problem (i.e. static polymorphism)

◆ boundaryTypes() [1/2]

template<class TypeTag >

BoundaryTypes Dumux::FVProblem< TypeTag >::boundaryTypes	(	const Element &	element,
		const SubControlVolume &	scv
	)		const

inlineinherited

Specifies which kind of boundary condition should be used for which equation on a given boundary segment.

Parameters

element	The finite element
scv	The sub control volume

◆ boundaryTypes() [2/2]

template<class TypeTag >

BoundaryTypes Dumux::FVProblem< TypeTag >::boundaryTypes	(	const Element &	element,
		const SubControlVolumeFace &	scvf
	)		const

inlineinherited

Specifies which kind of boundary condition should be used for which equation on a given boundary segment.

Parameters

element	The finite element
scvf	The sub control volume face

◆ boundaryTypesAtPos()

template<class TypeTag >

BoundaryTypes Dumux::InjectionProblem2PNI< TypeTag >::boundaryTypesAtPos ( const GlobalPosition & globalPos ) const

inline

Specifies which kind of boundary condition should be used for which equation on a given boundary segment.

Parameters

globalPos The global position

◆ computePointSourceMap()

template<class TypeTag >

void Dumux::FVProblem< TypeTag >::computePointSourceMap ( )

inlineinherited

Compute the point source map, i.e. which scvs have point source contributions.

Note: Call this on the problem before assembly if you want to enable point sources set via the addPointSources member function.

◆ dirichlet() [1/2]

template<class TypeTag >

PrimaryVariables Dumux::FVProblem< TypeTag >::dirichlet	(	const Element &	element,
		const SubControlVolume &	scv
	)		const

inlineinherited

Evaluate the boundary conditions for a dirichlet control volume.

Parameters

element	The finite element
scv	the sub control volume

Note: used for cell-centered discretization schemes

The method returns the boundary types information.

◆ dirichlet() [2/2]

template<class TypeTag >

PrimaryVariables Dumux::FVProblem< TypeTag >::dirichlet	(	const Element &	element,
		const SubControlVolumeFace &	scvf
	)		const

inlineinherited

Evaluate the boundary conditions for a dirichlet control volume face.

Parameters

element	The finite element
scvf	the sub control volume face

Note: used for cell-centered discretization schemes

The method returns the boundary types information.

◆ dirichletAtPos()

template<class TypeTag >

PrimaryVariables Dumux::InjectionProblem2PNI< TypeTag >::dirichletAtPos ( const GlobalPosition & globalPos ) const

inline

Evaluates the boundary conditions for a Dirichlet boundary segment.

Parameters

globalPos The global position

◆ enableInternalDirichletConstraints()

template<class TypeTag >

static constexpr bool Dumux::FVProblem< TypeTag >::enableInternalDirichletConstraints ( )

inlinestaticconstexprinherited

If internal Dirichlet contraints are enabled Enables / disables internal (non-boundary) Dirichlet constraints. If this is overloaded to return true, the assembler calls problem.hasInternalDirichletConstraint(element, scv). This means you have to implement the following member function.

bool hasInternalDirichletConstraint(const Element& element, const SubControlVolume& scv) const;

which returns a bool signifying whether the dof associated with the element/scv pair is contraint. If true is returned for a dof, the assembler calls problem.internalDiririchlet(element, scv). This means you have to additionally implement the following member function

PrimaryVariables internalDiririchlet(const Element& element, const SubControlVolume& scv) const;

which returns the enforced Dirichlet values the dof associated with the element/scv pair.

◆ extrusionFactor()

template<class TypeTag >

template<class ElementSolution >

Scalar Dumux::FVProblem< TypeTag >::extrusionFactor	(	const Element &	element,
		const SubControlVolume &	scv,
		const ElementSolution &	elemSol
	)		const

inlineinherited

Return how much the domain is extruded at a given sub-control volume.

This means the factor by which a lower-dimensional (1D or 2D) entity needs to be expanded to get a full dimensional cell. The default is 1.0 which means that 1D problems are actually thought as pipes with a cross section of 1 m^2 and 2D problems are assumed to extend 1 m to the back.

◆ extrusionFactorAtPos()

template<class TypeTag >

Scalar Dumux::FVProblem< TypeTag >::extrusionFactorAtPos ( const GlobalPosition & globalPos ) const

inlineinherited

Return how much the domain is extruded at a given position.

This means the factor by which a lower-dimensional (1D or 2D) entity needs to be expanded to get a full dimensional cell. The default is 1.0 which means that 1D problems are actually thought as pipes with a cross section of 1 m^2 and 2D problems are assumed to extend 1 m to the back.

◆ fvGridGeometry()

template<class TypeTag >

const GridGeometry & Dumux::FVProblem< TypeTag >::fvGridGeometry ( ) const

inlineinherited

The finite volume grid geometry.

◆ gravity()

template<class TypeTag >

const GravityVector & Dumux::PorousMediumFlowProblem< TypeTag >::gravity ( ) const

inlineinherited

Returns the acceleration due to gravity \(\mathrm{[m/s^2]}\).

This method is used for problems where the gravitational acceleration does not depend on the spatial position. The default behaviour is that if the ProblemEnableGravity property is true, \(\boldsymbol{g} = ( 0,\dots,\ -9.81)^T \) holds, else \(\boldsymbol{g} = ( 0,\dots, 0)^T \).

◆ gravityAtPos()

template<class TypeTag >

const GravityVector & Dumux::PorousMediumFlowProblem< TypeTag >::gravityAtPos ( const GlobalPosition & pos ) const

inlineinherited

Returns the acceleration due to gravity \(\mathrm{[m/s^2]}\).

This is discretization independent interface. By default it just calls gravity().

◆ gridGeometry()

template<class TypeTag >

const GridGeometry & Dumux::FVProblem< TypeTag >::gridGeometry ( ) const

inlineinherited

The finite volume grid geometry.

◆ initial()

template<class TypeTag >

template<class Entity >

PrimaryVariables Dumux::FVProblem< TypeTag >::initial ( const Entity & entity ) const

inlineinherited

Evaluate the initial value for an element (for cell-centered models) or vertex (for box / vertex-centered models)

Parameters

entity The dof entity (element or vertex)

◆ initialAtPos()

template<class TypeTag >

PrimaryVariables Dumux::InjectionProblem2PNI< TypeTag >::initialAtPos ( const GlobalPosition & globalPos ) const

inline

Evaluates the initial values for a control volume.

Parameters

globalPos The global position

◆ name()

template<class TypeTag >

const std::string Dumux::InjectionProblem2PNI< TypeTag >::name ( ) const

inline

Returns the problem name.

This is used as a prefix for files generated by the simulation.

◆ neumann()

template<class TypeTag >

NumEqVector Dumux::FVProblem< TypeTag >::neumann	(	const Element &	element,
		const FVElementGeometry &	fvGeometry,
		const ElementVolumeVariables &	elemVolVars,
		const ElementFluxVariablesCache &	elemFluxVarsCache,
		const SubControlVolumeFace &	scvf
	)		const

inlineinherited

Evaluate the boundary conditions for a neumann boundary segment.

This is the method for the case where the Neumann condition is potentially solution dependent

Parameters

element	The finite element
fvGeometry	The finite-volume geometry
elemVolVars	All volume variables for the element
elemFluxVarsCache	Flux variables caches for all faces in stencil
scvf	The sub control volume face

Negative values mean influx. E.g. for the mass balance that would be the mass flux in \( [ kg / (m^2 \cdot s)] \).

◆ neumannAtPos()

template<class TypeTag >

NumEqVector Dumux::InjectionProblem2PNI< TypeTag >::neumannAtPos ( const GlobalPosition & globalPos ) const

inline

Evaluates the boundary conditions for a Neumann boundary segment.

Parameters

globalPos The global position

The values store the mass flux of each phase normal to the boundary. Negative values indicate an inflow.

◆ paramGroup()

template<class TypeTag >

const std::string & Dumux::FVProblem< TypeTag >::paramGroup ( ) const

inlineinherited

The parameter group in which to retrieve runtime parameters.

◆ pointSource()

template<class TypeTag >

void Dumux::FVProblem< TypeTag >::pointSource	(	PointSource &	source,
		const Element &	element,
		const FVElementGeometry &	fvGeometry,
		const ElementVolumeVariables &	elemVolVars,
		const SubControlVolume &	scv
	)		const

inlineinherited

Evaluate the point sources (added by addPointSources) for all phases within a given sub-control-volume.

This is the method for the case where the point source is solution dependent

Parameters

source	A single point source
element	The finite element
fvGeometry	The finite-volume geometry
elemVolVars	All volume variables for the element
scv	The sub control volume

For this method, the values() method of the point sources returns the absolute conserved quantity rate generated or annihilate in units \( [ \textnormal{unit of conserved quantity} / s ] \). Positive values mean that the conserved quantity is created, negative ones mean that it vanishes. E.g. for the mass balance that would be a mass rate in \( [ kg / s ] \).

◆ pointSourceAtPos()

template<class TypeTag >

void Dumux::FVProblem< TypeTag >::pointSourceAtPos	(	PointSource &	pointSource,
		const GlobalPosition &	globalPos
	)		const

inlineinherited

Evaluate the point sources (added by addPointSources) for all phases within a given sub-control-volume.

This is the method for the case where the point source is space dependent

Parameters

pointSource	A single point source
globalPos	The point source position in global coordinates

For this method, the values() method of the point sources returns the absolute conserved quantity rate generated or annihilate in units \( [ \textnormal{unit of conserved quantity} / s ] \). Positive values mean that the conserved quantity is created, negative ones mean that it vanishes. E.g. for the mass balance that would be a mass rate in \( [ kg / s ] \).

◆ pointSourceMap()

template<class TypeTag >

const PointSourceMap & Dumux::FVProblem< TypeTag >::pointSourceMap ( ) const

inlineinherited

Get the point source map. It stores the point sources per scv.

◆ scvPointSources()

template<class TypeTag >

NumEqVector Dumux::FVProblem< TypeTag >::scvPointSources	(	const Element &	element,
		const FVElementGeometry &	fvGeometry,
		const ElementVolumeVariables &	elemVolVars,
		const SubControlVolume &	scv
	)		const

inlineinherited

Adds contribution of point sources for a specific sub control volume to the values. Caution: Only overload this method in the implementation if you know what you are doing.

◆ setName()

template<class TypeTag >

void Dumux::FVProblem< TypeTag >::setName ( const std::string & newName )

inlineinherited

Set the problem name.

This static method sets the simulation name, which should be called before the application problem is declared! If not, the default name "sim" will be used.

Parameters

newName The problem's name

◆ source()

template<class TypeTag >

NumEqVector Dumux::FVProblem< TypeTag >::source	(	const Element &	element,
		const FVElementGeometry &	fvGeometry,
		const ElementVolumeVariables &	elemVolVars,
		const SubControlVolume &	scv
	)		const

inlineinherited

Evaluate the source term for all phases within a given sub-control-volume.

This is the method for the case where the source term is potentially solution dependent and requires some quantities that are specific to the fully-implicit method.

Parameters

element	The finite element
fvGeometry	The finite-volume geometry
elemVolVars	All volume variables for the element
scv	The sub control volume

For this method, the return parameter stores the conserved quantity rate generated or annihilate per volume unit. Positive values mean that the conserved quantity is created, negative ones mean that it vanishes. E.g. for the mass balance that would be a mass rate in \( [ kg / (m^3 \cdot s)] \).

◆ sourceAtPos()

template<class TypeTag >

NumEqVector Dumux::InjectionProblem2PNI< TypeTag >::sourceAtPos ( const GlobalPosition & globalPos ) const

inline

Returns the source term.

Parameters

globalPos The global position

◆ spatialParams() [1/2]

template<class TypeTag >

SpatialParams & Dumux::PorousMediumFlowProblem< TypeTag >::spatialParams ( )

inlineinherited

Returns the spatial parameters object.

◆ spatialParams() [2/2]

template<class TypeTag >

const SpatialParams & Dumux::PorousMediumFlowProblem< TypeTag >::spatialParams ( ) const

inlineinherited

Returns the spatial parameters object.

◆ temperature()

template<class TypeTag >

Scalar Dumux::PorousMediumFlowProblem< TypeTag >::temperature ( ) const

inlineinherited

Returns the temperature \(\mathrm{[K]}\) for an isothermal problem.

This is not specific to the discretization. By default it just throws an exception so it must be overloaded by the problem if no energy equation is used.

◆ temperatureAtPos()

template<class TypeTag >

Scalar Dumux::PorousMediumFlowProblem< TypeTag >::temperatureAtPos ( const GlobalPosition & globalPos ) const

inlineinherited

Returns the temperature \(\mathrm{[K]}\) at a given global position.

This is not specific to the discretization. By default it just calls temperature().

Parameters

globalPos The position in global coordinates where the temperature should be specified.

Member Data Documentation

◆ gravity_

template<class TypeTag >

GravityVector Dumux::PorousMediumFlowProblem< TypeTag >::gravity_

protectedinherited

The gravity acceleration vector.

◆ spatialParams_

template<class TypeTag >

std::shared_ptr<SpatialParams> Dumux::PorousMediumFlowProblem< TypeTag >::spatialParams_

protectedinherited

The documentation for this class was generated from the following file:

test/porousmediumflow/2p/implicit/nonisothermal/problem.hh

Description

Public Types

Public Member Functions

Volume terms

Physical parameters for porous media problems

Boundary conditions and sources defining the problem

Member Typedef Documentation

◆ SpatialParams

Constructor & Destructor Documentation

◆ InjectionProblem2PNI()

Member Function Documentation

◆ addPointSources()

◆ addSourceDerivatives()

◆ applyInitialSolution()

◆ asImp_() [1/2]

◆ asImp_() [2/2]

◆ boundaryTypes() [1/2]

◆ boundaryTypes() [2/2]

◆ boundaryTypesAtPos()

◆ computePointSourceMap()

◆ dirichlet() [1/2]

◆ dirichlet() [2/2]

◆ dirichletAtPos()

◆ enableInternalDirichletConstraints()

◆ extrusionFactor()

◆ extrusionFactorAtPos()

◆ fvGridGeometry()

◆ gravity()

◆ gravityAtPos()

◆ gridGeometry()

◆ initial()

◆ initialAtPos()

◆ name()

◆ neumann()

◆ neumannAtPos()

◆ paramGroup()

◆ pointSource()

◆ pointSourceAtPos()

◆ pointSourceMap()

◆ scvPointSources()

◆ setName()

◆ source()

◆ sourceAtPos()

◆ spatialParams() [1/2]

◆ spatialParams() [2/2]

◆ temperature()

◆ temperatureAtPos()

Member Data Documentation

◆ gravity_

◆ spatialParams_