Class List

Here are the classes, structs, unions and interfaces with brief descriptions:

[detail level 12345]

►NDumux
►NBinaryCoeff
CAir_Mesitylene	Binary coefficients for water and mesitylene
CAir_Xylene	Binary coefficients for air and xylene
CBrine_CO2	Binary coefficients for brine and CO2
CBrine_CO2_Old	Old version of binary coefficients for CO2 and brine. Calculates molfraction of CO2 in brine according to Duan and Sun 2003 molfraction of H2O has been assumed to be a constant value For use with the actual brine_co2_system this class still needs to be adapted
CH2O_Air	Binary coefficients for water and air
CH2O_CH4	Binary coefficients for water and methane
CH2O_Component	Binary coefficients for water and another component
CH2O_Component< Scalar, Components::Constant< id, Scalar > >	Binary coefficients for water and a constant component
CH2O_HeavyOil	Binary coefficients for water and heavy oil as in SAGD processes
CH2O_Mesitylene	Binary coefficients for water and mesitylene
CH2O_N2	Binary coefficients for water and nitrogen
CH2O_O2	Binary coefficients for water and oxygen
CH2O_Xylene	Binary coefficients for water and xylene
CN2_O2	Binary coefficients for nitrogen and oxygen
►NCCMpfaDataHandleBases
CSystemMatricesHandle	Common base class to all handles. Stores arrays of the matrices involved in the interaction volume-local systems of equations. Apart from the transmissibility matrix we store those matrices that are needed e.g. for later face pressure reconstruction. The fluxes as well as the local systems of equations can be expressed as functions of the intermediate unknown face face values $\overline{\mathbf{u}}$ and the known cell/Dirichlet values $\mathbf{u}$ using the matrices $\mathbf{A}$, $\mathbf{B}$, $\mathbf{C}$, $\mathbf{D}$ and the vector of Neumann fluxes $\mathbf{N}$ as follows:
CSystemVectorsHandle	Common base class to all handles. Stores arrays of the vectors involved in the interaction volume-local systems of equations
►NComponents
►NDetail
CDisableStaticAssert
CTabulatedComponentTable
CAir	A class for the air fluid properties
CAmmonia	A class for the Ammonia (NH3) component properties
CBase	Base class for all components Components provide the thermodynamic relations for the liquid, gaseous and/or solid state of a single chemical species or a fixed mixture of species. Fluid systems use components to compute thermodynamic quantities of phases
CBenzene	A simple benzene component (LNAPL)
CBrine	A class for the brine fluid properties
CCalcite	A class for the CaCO3 mineral phase properties
CCalciumIon	A class for the Ca2+ (Calcium ion) component properties
CCaO	A class for the CaO properties
CCaO2H2	A class for the CaO2H2 properties
CCarbonateIon	A class for the CO3 fluid properties
CCH4	Properties of pure molecular methane $C{H}_4$
CChlorideIon	A class for the Cl- (Chloride ion) component properties
CCO2	A class for the CO2 fluid properties
CConstant	A component which returns run time specified values for all fluid properties
CGas	Interface for components that have a gas state
CGlucose	A class for the Glucose component properties
CGranite	Properties of granite
CH2	Properties of pure molecular hydrogen $H_2$
CH2O	Material properties of pure water $H_{2}O$
CHeavyOil	Properties of the component heavyoil
CIon	Interface for components that are ions
CIsAqueous	IsAqueous struct
CIsAqueous< Brine< Scalar, H2O > >
CIsAqueous< H2O< Scalar > >
CIsAqueous< SimpleH2O< Scalar > >
CIsAqueous< TabulatedComponent< RawComponent, useVaporPressure > >
CLiquid	Interface for components that have a liquid state
CMesitylene	Mesitylene
CN2	Properties of pure molecular nitrogen $N_2$
CNaCl	A class for the NaCl properties
CO2	Properties of pure molecular oxygen $O_2$
CSimpleCO2	A simple version of pure CO2
CSimpleH2O	A simple implementation of pure water
CSodiumIon	A class for the Na+ (Sodium ion) component properties
CSolid	Interface for components that have a solid state
CTabulatedComponent	Tabulates all thermodynamic properties of a given component
CTrichloroethene	A simple implementation of TCE as exemplary component for a dense NAPL
CUrea	A class for the Urea component properties
CXylene	Properties of xylene
►NDetail	Distance implementation details
►NBox
CScvCorners
CScvCorners< Dune::GeometryTypes::hexahedron >
CScvCorners< Dune::GeometryTypes::line >
CScvCorners< Dune::GeometryTypes::prism >
CScvCorners< Dune::GeometryTypes::quadrilateral >
CScvCorners< Dune::GeometryTypes::tetrahedron >
CScvCorners< Dune::GeometryTypes::triangle >
CScvfCorners
CScvfCorners< Dune::GeometryTypes::hexahedron >
CScvfCorners< Dune::GeometryTypes::line >
CScvfCorners< Dune::GeometryTypes::prism >
CScvfCorners< Dune::GeometryTypes::quadrilateral >
CScvfCorners< Dune::GeometryTypes::tetrahedron >
CScvfCorners< Dune::GeometryTypes::triangle >
►NDofBackend
CHasResize
►NFCDiamond
CInsideOutsideScv
CInsideOutsideScv< IndexType, Dune::GeometryTypes::hexahedron >
CInsideOutsideScv< IndexType, Dune::GeometryTypes::quadrilateral >
CInsideOutsideScv< IndexType, Dune::GeometryTypes::tetrahedron >
CInsideOutsideScv< IndexType, Dune::GeometryTypes::triangle >
CScvCorners
CScvCorners< Dune::GeometryTypes::hexahedron >
CScvCorners< Dune::GeometryTypes::quadrilateral >
CScvCorners< Dune::GeometryTypes::tetrahedron >
CScvCorners< Dune::GeometryTypes::triangle >
CScvfCorners
CScvfCorners< Dune::GeometryTypes::hexahedron >
CScvfCorners< Dune::GeometryTypes::quadrilateral >
CScvfCorners< Dune::GeometryTypes::tetrahedron >
CScvfCorners< Dune::GeometryTypes::triangle >
►NHelmholtzOperator
CHelmholtzModelHomogeneousNeumannProblem
CHelmholtzModelLocalResidual
CHelmholtzModelVolumeVariables
CPolicy
CTTag
►NIntersections
CIntersectionEntity	A class representing an intersection entity
►NIstlSolvers
CIstlDefaultBlockLevelPreconditionerFactory
CIstlDefaultPreconditionerFactory
CMatrixForSolver
CMatrixForSolver< M, true >
CMatrixOperator
CMatrixOperator< LSTraits, LATraits, convert, false >
CMatrixOperator< LSTraits, LATraits, convert, true >
CVectorForSolver
CVectorForSolver< V, true >
►NLATraits
CLATraitsFromAssemblerImpl
CLATraitsFromAssemblerImpl< Assembler, true >
►NMultithreading
►NExecutionBackends
CCpp
CKokkos
COpenMP
CSerial
CTBB
►NNewton
CPriVarSwitchVariablesType
CPriVarSwitchVariablesType< Assembler, false >
CsupportsPartialReassembly	Helper struct detecting if an assembler supports partial reassembly
►NPDESolver
CVariablesChooser
CVariablesChooser< A, false >
CVariablesChooser< A, true >
►NPQ1Bubble
COverlappingScvCorners
COverlappingScvCorners< Dune::GeometryTypes::hexahedron >
COverlappingScvCorners< Dune::GeometryTypes::line >
COverlappingScvCorners< Dune::GeometryTypes::quadrilateral >
COverlappingScvCorners< Dune::GeometryTypes::tetrahedron >
COverlappingScvCorners< Dune::GeometryTypes::triangle >
COverlappingScvfCorners
COverlappingScvfCorners< Dune::GeometryTypes::hexahedron >
COverlappingScvfCorners< Dune::GeometryTypes::line >
COverlappingScvfCorners< Dune::GeometryTypes::quadrilateral >
COverlappingScvfCorners< Dune::GeometryTypes::tetrahedron >
COverlappingScvfCorners< Dune::GeometryTypes::triangle >
►NRasterImageData
CFormat	A struct that holds all information of the image format
CHeaderData	A struct that contains all header data of the image
CResult	The return type of the reading functions. Holds the actual pixel values and the header data
►NStaggered
CJacobianTypeImpl
CSubDomainFVGridGeometryImpl
CSubDomainFVGridGeometryImpl< SubDomainTypeTag, 0 >
CSubDomainFVGridGeometryImpl< SubDomainTypeTag, 1 >
CSubDomainGridVariablesImpl
CSubDomainGridVariablesImpl< SubDomainTypeTag, 0 >
CSubDomainGridVariablesImpl< SubDomainTypeTag, 1 >
CSubDomainJacobianMatrixImpl
CSubDomainJacobianMatrixImpl< SubDomainTypeTag, 0 >
CSubDomainJacobianMatrixImpl< SubDomainTypeTag, 1 >
CSubDomainPrimaryVariablesImpl
CSubDomainPrimaryVariablesImpl< SubDomainTypeTag, 0 >
CSubDomainPrimaryVariablesImpl< SubDomainTypeTag, 1 >
CSubDomainSolutionVectorImpl
CSubDomainSolutionVectorImpl< SubDomainTypeTag, 0 >
CSubDomainSolutionVectorImpl< SubDomainTypeTag, 1 >
CAxisData	In Axis Data stored per sub face
CAxisData< GridView, 1 >	In Axis Data stored per sub face for first-order scheme
CConcatSeq
CConcatSeq< std::index_sequence< Is1... >, offset, std::index_sequence< Is2... > >
CCouplingManagerSupportsMultithreadedAssemblySelector
CCouplingManagerSupportsMultithreadedAssemblySelector< Traits, DiscretizationMethods::CVFE< D > >
CcreateMultiTypeBlockMatrixType	Helper class to create a multitype matrix given the diagonal matrix blocks
CDebugIntersectionVTKOutput	Simple legacy VTK writer for outputting debug data on the coupling interface
CDirectIstlSolver	Direct dune-istl linear solvers
CDiscretizationDefaultLocalOperator
CDiscretizationDefaultLocalOperator< TypeTag >
CEmptyFreeFlowHeatCondType
CFaceCenteredStaggeredLocalIntersectionIndexMapper
CFaceCenteredStaggeredLocalIntersectionIndexMapper< GridView, false >	Provides a mapping of local intersection indices (indexInInside) such that the local indices always follow the order of a reference element, regardless of how the element is oriented
CFaceCenteredStaggeredLocalIntersectionIndexMapper< GridView, true >	Provides a mapping of local intersection indices (indexInInside) such that the local indices always follow the order of a reference element, regardless of how the element in oriented
CFreeFlowHeatCondType
CFreeFlowHeatCondType< true, Traits >
CGeometrySquaredDistance
CGeometrySquaredDistance< Geo1, Geo2, dimWorld, 0, 0 >
CGeometrySquaredDistance< Geo1, Geo2, dimWorld, 0, 1 >
CGeometrySquaredDistance< Geo1, Geo2, dimWorld, 0, 2 >
CGeometrySquaredDistance< Geo1, Geo2, dimWorld, 1, 0 >
CGeometrySquaredDistance< Geo1, Geo2, dimWorld, 2, 0 >
CGridIntersectionIterator	Iterate over the GridViews boundary intersections This will visit all intersections for which boundary() is true and neighbor() is false
CHasIndex
CHasIndex< i, std::tuple< Indices... > >
ChasState	Helper struct detecting if a PrimaryVariables object has a state() function
CInAxisVelocities
CInAxisVelocities< Scalar, 1 >
CIstlIterativeLinearSolver	Standard dune-istl iterative linear solvers
CIstlSolverResult
CisUG
CLocalAssemblerChooser
CLocalAssemblerChooser< DiscretizationMethods::CCMpfa >
CLocalAssemblerChooser< DiscretizationMethods::CCTpfa >
CLocalAssemblerChooser< DiscretizationMethods::CVFE< DM > >
CLocalAssemblerChooser< DiscretizationMethods::FCStaggered >
CLocalDofTraits
CLocalDofTraits< GridView, DiscretizationMethods::Box >
CLocalDofTraits< GridView, DiscretizationMethods::FCDiamond >
CLocalDofTraits< GridView, DiscretizationMethods::PQ1Bubble >
CMax
CMin
CMomentumDiscretizationMethod
CMultiDomainMatrixType	Helper alias to create the JacobianMatrix type
CMultiDomainTupleSharedPtr	Helper alias to create a tuple of shared_ptr<...> from an indexed type
CMultiDomainTupleSharedPtrConst	Helper alias to create a tuple of shared_ptr<const ...> from an indexed type
CNativeDuneVectorType
CNativeDuneVectorType< Dune::MultiTypeBlockVector< Args... > >
CNativeDuneVectorTypeImpl
CNativeDuneVectorTypeImpl< V, true >
CNetworkIndicatorFunction	Get the closest segment for a given surface point
CNonConformingIntersectionIteratorFactory	Non conforming intersection iterator factory
CNoOpFunctor
CPairData	Parallel Data stored per sub face
CParallelISTLHelperImpl
CParallelISTLHelperImpl< LinearSolverTraits, true >
CPointsToGeometryWrapper
CPQ1BubbleLocalBasis	P1/Q1 + Bubble on the reference element
CPQ1BubbleLocalCoefficients	Associations of the P1/Q1 + Bubble degrees of freedom to the facets of the reference element
CPQ1BubbleLocalInterpolation	Evaluate the degrees of freedom of a P1 + Bubble basis
CProblemTraits
CProblemTraits< Problem, DiscretizationMethods::Box >
CProblemTraits< Problem, DiscretizationMethods::CCMpfa >
CProblemTraits< Problem, DiscretizationMethods::CCTpfa >
CProblemTraits< Problem, DiscretizationMethods::FCDiamond >
CProblemTraits< Problem, DiscretizationMethods::FCStaggered >
CProblemTraits< Problem, DiscretizationMethods::PQ1Bubble >
CProblemTraits< Problem, DiscretizationMethods::Staggered >
CSegmentNetwork	Segment representation of a 1d network grid
CSetEqual
CSkeletonFunction	Skeleton function for intersection writer
CStokesPreconditioner	A Stokes preconditioner (saddle-point problem) for the problem $\left(\begin{array}{cc}A& B\\ C& 0\end{array}\right)\left(\begin{array}{c}u\\ p\end{array}\right)=\left(\begin{array}{c}f\\ g\end{array}\right),$
CSum
CSupportsPeriodicity
CSupportsPeriodicity< Dune::SPGrid< ct, dim, Ref, Comm > >
CValidityTestFunctor
CVariablesBackend
CVariablesBackend< Vars, false >	Class providing operations for primary variable vector/scalar types
CVariablesBackend< Vars, true >	Class providing operations for generic variable classes, containing primary and possibly also secondary variables
►NDiscretizationMethods
►NCVFEMethods
CCR_RT
CPQ1
CPQ1Bubble
CCCMpfa
CCCTpfa
CCVFE
CFCStaggered
CFEM
CNone
CStaggered
►NEmbedded1d3dCouplingMode
CAverage
CKernel
CLine
CProjection
CSurface
►NEmbeddedCoupling
CCylinderIntegration	Helper class to integrate over a cylinder domain
CEllipseIntegration	Helper class to integrate over an elliptic domain
CEllipticCylinderIntegration	Helper class to integrate over an elliptic cylinder domain
CExtendedSourceStencil	A class managing an extended source stencil
►NExperimental
►NDetail
CLocalAssemblerChooser
CLocalAssemblerChooser< DiscretizationMethods::CCMpfa >
CLocalAssemblerChooser< DiscretizationMethods::CCTpfa >
CLocalAssemblerChooser< DiscretizationMethods::CVFE< DM > >
►NMultiStage	Multi-stage time stepping scheme implementations
CDIRKThirdOrderAlexander	Third order DIRK scheme
CExplicitEuler	An explicit Euler time stepping scheme
CImplicitEuler	An implicit Euler time stepping scheme
CRungeKuttaExplicitFourthOrder	Classical explicit fourth order Runge-Kutta scheme
CTheta	A theta time stepping scheme theta=1.0 is an implicit Euler scheme, theta=0.0 an explicit Euler scheme, theta=0.5 is a Cranck-Nicholson scheme
CCCLocalAssembler	An assembler for Jacobian and residual contribution per element (cell-centered methods)
CCCLocalAssembler< TypeTag, Assembler, DiffMethod::numeric, Implementation >	Cell-centered scheme local assembler using numeric differentiation
CCCLocalAssemblerBase	A base class for all local cell-centered assemblers
CCVFELocalAssembler	An assembler for Jacobian and residual contribution per element (CVFE methods)
CCVFELocalAssembler< TypeTag, Assembler, DiffMethod::numeric, Implementation >	Control volume finite element local assembler using numeric differentiation
CCVFELocalAssemblerBase	A base class for all local CVFE assemblers
CFVGridVariables	The grid variable class for finite volume schemes, storing variables on scv and scvf (volume and flux variables)
CFVGridVariablesLocalView	Finite volume-specific local view on grid variables
CFVLocalAssemblerBase	A base class for all local assemblers
CGridVariables	Base class for grid variables
CMultiStageFVAssembler	A linear system assembler (residual and Jacobian) for finite volume schemes (box, tpfa, mpfa, ...)
CMultiStageFVLocalOperator
CMultiStageMethod	Abstract interface for one-step multi-stage method parameters in Shu/Osher form
CMultiStageMultiDomainFVAssembler	A linear system assembler (residual and Jacobian) for finite volume schemes (box, tpfa, mpfa, ...) with multiple domains
CMultiStageParams	Data object for the parameters of a given stage
CMultiStageTimeStepper	Time stepping with a multi-stage method
CNewmarkBeta	Newmark-beta time integration scheme
CSubDomainCCLocalAssembler	The cell-centered scheme multidomain local assembler
CSubDomainCCLocalAssembler< id, TypeTag, Assembler, DiffMethod::numeric >	Cell-centered scheme multidomain local assembler using numeric differentiation
CSubDomainCCLocalAssemblerBase	A base class for all multidomain local assemblers
CSubDomainCVFELocalAssembler	The CVFE scheme multidomain local assembler
CSubDomainCVFELocalAssembler< id, TypeTag, Assembler, DiffMethod::numeric >	CVFE scheme multi domain local assembler using numeric differentiation
CSubDomainCVFELocalAssemblerBase	A base class for all CVFE subdomain local assemblers
CTimeLevel	Class that represents a time level during time integration
CVariables	Class that represents the variables of a model. We assume that models are formulated on the basis of primary and possibly secondary variables, where the latter may non-linearly depend on the former. Variables in Dumux represent the state of a numerical solution of a model, consisting of all primary/secondary variables and, if a transient problem is modeled, time information
►NFCGridManagerChecks
CFulfillConditions
CFulfillConditions< checkDimWorld, G1, G2 >
CFulfillConditions< checkDimWorld, G1, Gs... >
►NFluidMatrix
CAdapter	Adapter to inherit from, allowing the inheriting class to be wrapped by the makeFluidMatrixInteraction function
CAdsorption	Wrapper type for adsorption laws
►CBrooksCorey	Implementation of the Brooks-Corey capillary pressure <-> saturation relation. This class bundles the "raw" curves as static members and doesn't concern itself converting absolute to effective saturations and vice versa
CParams	The parameter type
►CBrooksCoreyRegularization	A regularization for the BrooksCorey material law
CParams	Regularization parameters
CDataSplineTwoPMaterialLaw	Pc- and Kr-sw curves based on monotone splines through given data points
►CHeatPipeLaw	Implementation of the capillary pressure <-> saturation relation for the heatpipe problem
CParams	The parameter type
CInterfacialArea	Wrapper class to implement regularized laws (pc-sw-a) with a conversion policy between absolution and effective saturations
►CInterfacialAreaExponential	Implementation of the exponential function relating specific interfacial area to wetting phase saturation and capillary pressure as suggested by Nuske(2009) (Diploma thesis) [62]
CParams
►CInterfacialAreaExponentialCubic	Implementation of a exponential function relating specific interfacial area to wetting phase saturation and capillary pressure
CParams
►CInterfacialAreaolynomialEdgeZero2ndOrder	Implementation of the polynomial of second order relating specific interfacial area to wetting phase saturation and capillary pressure
CParams
►CInterfacialAreaPcMax	Implementation of the polynomial of second order relating specific interfacial area to wetting phase saturation and capillary pressure
CParams
►CInterfacialAreaPolynomialSecondOrder	Implementation of the polynomial of second order relating specific interfacial area to wetting phase saturation and capillary pressure as suggested by Joekar-Niasar(2008) [46]
CParams
►CLinearMaterial	Linear capillary pressure and relative permeability <-> saturation relations
CParams	The parameter type
CMPAdapter	An adapter for mpnc to use the capillary pressure-saturation relationships
CMPAdapter< MaterialLaw, 2 >
CMPLinearMaterial	Implements a linear saturation-capillary pressure relation
CMultiPhasePcKrSw	Wrapper type for multiphase interface laws providing pc-S and kr-S rules
CNonwettingSolidInterfacialAreaPcSw	Wrapper type for laws providing rules for the nonwetting-solid interfacial area
►CNoRegularization	A tag to turn off regularization and it's overhead
CParams	Empty parameter structure
►CParkerVanGenuchten3P	Implementation of Parker/vanGenuchten's capillary pressure <-> saturation relation for three phases. This class bundles the "raw" curves as static members and doesn't concern itself converting absolute to effective saturations and vince versa
CParams	The parameter type
►CParkerVanGenuchten3PEffToAbsPolicy
CParams	The parameter type
►CParkerVanGenuchten3PRegularization	A regularization for the ParkerVanGenuchten3PRegularization material law
CParams	Regularization parameters
CParkerVanGenuchtenMaterialLaw	Parker van Genuchten material law
CPcKrSw	Wrapper type for laws providing pc-Sw and kr-Sw rules
►CSmoothedLinearLaw	Implements a linear saturation-capillary pressure relation
CParams	The parameter type
CSplineTwoPMaterialLaw	A spline approximation wrapper for 2p material laws
CThreePhasePcKrSw	Wrapper type for 3p interface laws providing pc-S and kr-S rules
►CThreePNAPLAdsorption	Implementation of a NAPL adsorption model
CParams
►CTwoPEffToAbsDefaultPolicy	This is a policy for 2p material laws how to convert absolute to relative saturations and vice versa
CParams	The parameter type
CTwoPMaterialLaw	Wrapper class to implement regularized material laws (pc-sw, kr-sw) with a conversion policy between absolution and effective saturations
►CVanGenuchten	Implementation of the van Genuchten capillary pressure <-> saturation relation, and relative permeability
CParams	The parameter type
►CVanGenuchtenRegularization	A regularization for the VanGenuchten material law
CParams	Regularization parameters
CWettingNonwettingInterfacialAreaPcSw	Wrapper type for laws providing rules for the wetting-nonwetting interfacial area
CWettingSolidInterfacialAreaPcSw	Wrapper type for laws providing rules for the wetting-solid interfacial area
►NFluidSystems
►NDetail
CBrineCO2Indices	Class that exports some indices that should be provided by the BrineCO2 fluid system. The indices are chosen dependent on the policy, i.e. if a simplified pseudo component Brine is used or salt is considered an individual component
CBrineCO2Indices< false >	Specialization for the case of brine being a fluid system with NaCl as individual component
CBrineCO2Indices< true >	Specialization for the case of brine being a pseudo component with a constant salinity
CBase	Fluid system base class
CBrine	A compositional single phase fluid system consisting of two components, which are H2O and NaCl
CBrineAir	A compositional two-phase fluid system with a liquid and a gaseous phase and $H_{2}O$, $Air$ and $S$ (dissolved minerals) as components
CBrineAirDefaultPolicy	Policy for the brine-air fluid system
CBrineCO2	A compositional fluid with brine (H2O & NaCl) and carbon dioxide as components in both the liquid and the gas (supercritical) phase
CBrineCO2DefaultPolicy	Default policy for the Brine-CO2 fluid system
CH2OAir	A compositional two-phase fluid system with water and air as components in both, the liquid and the gas phase
CH2OAirDefaultPolicy	Policy for the H2O-air fluid system
CH2OAirMesitylene	A three-phase fluid system featuring gas, NAPL and water as phases and distilled water $({\mathrm{H}}_2\mathrm{O})$ and air (Pseudo component composed of $79\mathrm{\%}{\mathrm{N}}_2$, $20\mathrm{\%}{\mathrm{O}}_2$ and Mesitylene $({\mathrm{C}}_6{\mathrm{H}}_3({\mathrm{CH}}_3{)}_3)$ as components
CH2OAirXylene	A three-phase fluid system featuring gas, NAPL and water as phases and distilled water $({\mathrm{H}}_2\mathrm{O})$ and air (Pseudo component composed of $79\mathrm{\%}{\mathrm{N}}_2$, $20\mathrm{\%}{\mathrm{O}}_2$ and Mesitylene $({\mathrm{C}}_8{\mathrm{H}}_{10})$ as components
CH2OHeavyOil	A compositional fluid system with water and heavy oil components in both the liquid and the gas phase
CH2ON2	A two-phase fluid system with two components water $({\mathrm{H}}_2\mathrm{O})$ Nitrogen $({\mathrm{N}}_2)$ for non-equilibrium models
CH2ON2DefaultPolicy	Policy for the H2O-N2 fluid system
CH2ON2Kinetic	A two-phase fluid system with two components water $({\mathrm{H}}_2\mathrm{O})$ Nitrogen $({\mathrm{N}}_2)$ for non-equilibrium models. TODO: Is this fluid system necessary??
CH2ON2O2	A two-phase (water and air) fluid system with water, nitrogen and oxygen as components
CH2ON2O2DefaultPolicy	Policy for the H2O-N2-O2 fluid system
CLiquidPhaseTwoC	A liquid phase consisting of a two components, a main component and a conservative tracer component
COnePAdapter	An adapter for multi-phase fluid systems to be used with (compositional) one-phase models
COnePGas	A gaseous phase consisting of a single component
COnePLiquid	A liquid phase consisting of a single component
CSpe5	The fluid system for the SPE-5 benchmark problem
CThreePImmiscible	A fluid system for three-phase models assuming immiscibility and thermodynamic equilibrium
CTwoPImmiscible	A fluid system for two-phase models assuming immiscibility and thermodynamic equilibrium
CTwoPOneC	A two-phase fluid system with only one component
►NFluxVariablesCaching
CEmptyAdvectionCache	Empty caches to use in a constitutive flux law/process, e.g. Darcy's law
CEmptyCache	An empty flux variables cache
CEmptyCacheFiller	The empty filler class corresponding to EmptyCache
CEmptyDiffusionCache
CEmptyHeatConductionCache
►NFreeFlowPoreNetworkDetail
CCouplingManagers
CCouplingMaps
►NFreeFlowPorousMediumCoupling
CIndexHelper	Helper struct to choose the correct index for phases and components. This is need if the porous-medium-flow model features more fluid phases than the free-flow model
CIndexHelper< freeFlowIdx, porousMediumIndex, FFFS, false >	Helper struct to choose the correct index for phases and components. This is need if the porous-medium-flow model features more fluid phases than the free-flow model. Specialization for the case that no adapter is used
CIndexHelper< freeFlowIdx, porousMediumIndex, FFFS, true >	Helper struct to choose the correct index for phases and components. This is need if the porous-medium-flow model features more fluid phases than the free-flow model. Specialization for the case that a adapter is used
CIsFicksLaw	This structs indicates that Fick's law is not used for diffusion
CIsFicksLaw< Dumux::FicksLaw< T > >	This structs indicates that Fick's law is used for diffusion
CIsSameFluidSystem	This structs helps to check if the two sub models use the same fluidsystem. Specialization for the case of using an adapter only for the free-flow model
CIsSameFluidSystem< FS, FS >	This structs helps to check if the two sub models use the same fluidsystem
►NGeneratedCO2Tables
CCO2Tables
CTabulatedDensityTraits
CTabulatedEnthalpyTraits
CTabulatedProperties	A generic template for tabulated material laws that depend on two parameters
►NGrid
►NCapabilities
CMultithreadingSupported
CMultithreadingSupported< Dune::YaspGrid< dim, Coordinates > >
►NIAPWS
CCommon	Implements relations which are common for all regions of the IAPWS '97 formulation
CRegion1	Implements the equations for region 1 of the IAPWS '97 formulation
CRegion2	Implements the equations for region 2 of the IAPWS '97 formulation
CRegion4	Implements the equations for region 4 of the IAPWS '97 formulation
►NInterpolationPolicy	Forward declaration of the linear interpolation policy (default)
CLinear	Interpolate linearly between two given values
CLinearTable	Interpolate linearly in a piecewise linear function (tabularized function)
►NIntersectionPolicy
CDefaultPolicyChooser	Default policy chooser class
CPointPolicy	Policy structure for point-like intersections
CPolygonPolicy	Policy structure for polygon-like intersections
CPolyhedronPolicy	Policy structure for polyhedron-like intersections
CSegmentPolicy	Policy structure for segment-like intersections
►NIO
CGridWriter
COutputModule
►NMetaData
►NConcept
CGridGeometry	Concept of GridGeometry
CGridVariables	Concept of GridVariables
CGridView	Concept of GridView
CCollector	Class to collect metadata
►NMPNCInitialConditions
CAllPhasesPresent
CNotAllPhasesPresent
►NMultidomain
►NDetail
CIsStdTuple_
CIsStdTuple_< std::tuple< Args... > >
►NNavierStokes
►NSlipConditions
CBJ	Tag for the Beavers-Joseph slip condition
CBJS	Tag for the Beavers-Joseph-Saffman slip condition
►NOptimization
►NDetail
CLevenbergMarquardt	A nonlinear least squares solver with $n$ model parameters and $m$ observations
CSolver	Solver base class
►NPoreNetwork
►NDetail
CNoDiffusionType
CSnappyGridManagerHelper	A helper for the grid creator that matches a free-flow grid to a PNM grid
CTransmissibility
►NFluidMatrix
CLocalRulesTraits	LocalRulesTraits for implementation of capillary pressure curves for multiple pore body geometries
►CMultiShapeTwoPLocalRules	Implementation of capillary pressure curves for multiple pore body geometries
CBasicParams
CPlatonicBodyParams	The parameter type
CSingleShapeTwoPLocalRules	Base class for all standard pore-local pc-Sw curves
CTwoPLocalRulesPlatonicBody	Implementation of the simplified pore-local capillary pressure-saturation curve for platonic bodies (tetrahedron, cube, octahedron, dodecahedron, icosahedron)
►CTwoPLocalRulesPlatonicBodyRegularization	Two-phase rules for regularizing the pc-SW for platonic bodies
CParams
►NNonWettingPhaseTransmissibility
CBakkeOren
CMogensen	TODO: evaluate and maybe remove
CValvatne	TODO: evaluate and maybe remove
►NWettingLayerTransmissibility
CCreviceResistanceFactorZhou
►CRansohoffRadke
CWettingLayerCache
CAveragedValues	Calculates averaged values of the network solution
CBoundaryFlux	Class for the calculation of fluxes at the boundary of pore-network models
CCommonIOFields	Adds output fields specific to all pore-network models
CCreepingFlow	Hagen–Poiseuille-type flux law to describe the advective flux for pore-network models
CDefaultPNMData	Base class for geometry data extraction from the grid data format
CDualNetworkCouplingMapper	Coupling mapper for Stokes and Darcy domains with equal dimension
CEmptyCache
CGridData	Class for grid data attached to dgf or gmsh grid files
CGridGeometry	Base class for the finite volume geometry for porenetwork models
CGridGeometry< Scalar, GV, false, Traits >	Base class for the finite volume geometry for porenetwork models
CGridGeometry< Scalar, GV, true, Traits >	Base class for the finite volume geometry for porenetwork models
CLabels	Labels for pores and throats
►CNonCreepingFlow	Non-creeping flow flux law to describe the advective flux for pore-network models based on El-Zehairy et al.(2019). https://doi.org/10.1016/j.advwatres.2019.103378
►CTransmissibility	Inherit transmissibility from creeping flow transmissibility law to cache non-creeping flow-related parameters
CSinglePhaseCache
COnePDefaultSpatialParams	The default class for spatial parameters for single-phase pore-network models
COnePFluxVariablesCache	Flux variables cache for the single-phase-flow PNM Store data required for flux calculation
COnePIOFields	Adds output fields specific to the PNM 1p model
COnePNCIOFields	Adds output fields specific to the PNM 1pnc model
COnePNCVolumeVariables	Contains the quantities which are are constant within a finite volume in the one-phase, n-component model
COnePSpatialParams	The base class for spatial parameters for single-phase pore-network models
COnePVolumeVariables	Contains the quantities which are constant within a finite volume (the pore body) in the one-phase model
CParametersForGeneratedGrid	Helper class to assign parameters to a generated grid
CPNMDefaultGridGeometryTraits	The default traits
CPNMDefaultScvfGeometryTraits	Default traits class
CPNMDefaultScvGeometryTraits	Default traits class
CPNMFicksLaw	Specialization of Fick's Law for the pore-network model
CPNMFouriersLaw	Specialization of Fourier's Law for the pore-network model
CPNMFVElementGeometry	Base class for the local geometry for porenetworks
CPNMFVElementGeometry< GG, false >	Specialization in case the FVElementGeometries are not stored
CPNMFVElementGeometry< GG, true >	Specialization in case the FVElementGeometries are stored
CPNMHeatExtendedSourceStencil	A class managing an extended source stencil
CPNMHeatTransferCouplingManager	Coupling manager for dual network approach for pore network models
CPNMSubControlVolume	Sub control volume for porenetworks
CPNMSubControlVolumeFace	Class for a sub control volume face for porenetworks
CPNMTwoPDefaultGridFVCTraits	Flux variable caches traits
CPNMTwoPElementFluxVariablesCache	The flux variables caches for an element
CPNMTwoPElementFluxVariablesCache< GFVC, false >	The flux variables caches for an element with caching disabled
CPNMTwoPElementFluxVariablesCache< GFVC, true >	The flux variables caches for an element with caching enabled
CPNMTwoPGridFluxVariablesCache	Flux variable caches on a gridview
CPNMTwoPGridFluxVariablesCache< P, FVC, false, Traits >	The grid flux variables cache for the two-phase PNM hodling the invasion state of the throats
CPNMTwoPGridFluxVariablesCache< P, FVC, true, Traits >	The grid flux variables cache for the two-phase PNM hodling the invasion state of the throats
CSnappyGridManager	A grid creator that matches a free-flow grid to a PNM grid
CSolidEnergyFluxVariablesCache
CSolidEnergyIOFields	Adds output fields specific to the PNM solid-energy model
CSolidEnergySpatialParams	The base class for spatial parameters for pore network solid models
CSolidEnergyVolumeVariables	Contains the quantities which are constant within a finite volume in the solid-energy model
CSpatialParams	The base class for spatial parameters for pore-network models
CSphereCapGrainFouriersLaw	Specialization of Fourier's Law for the pore-network SOLID model
CSubGridData	Wrapper for subgrid data
CTransmissibilityAzzamDullien	Used by Joeakar-Niasar
CTransmissibilityBruus	Collection of single-phase flow throat transmissibilities based on Bruus, H. (2011). Acoustofluidics 1: Governing equations in microfluidics. Lab on a Chip, 11(22), 3742-3751. https://backend.orbit.dtu.dk/ws/portalfiles/portal/5900070/rsc%5B1%5D.pdf
CTransmissibilityPatzekSilin	Single-phase flow throat transmissibility based on Patzek & Silin (2001) https://doi.org/10.1006/jcis.2000.7413
CTruncatedPyramidGrainFouriersLaw	Specialization of Fourier's Law for the pore-network SOLID model
CTwoPDefaultSpatialParams	The default class for spatial parameters for two-phase pore-network models
CTwoPFluxVariablesCache	Flux variables cache for the two-phase-flow PNM Store data required for flux calculation
CTwoPInvasionState	This class updates the invasion state for the two-phase PNM
CTwoPIOFields	Adds output fields specific to the PNM 2p model
CTwoPNCIOFields	Adds output fields specific to the PNM 2pnc model
CTwoPNCVolumeVariables	Contains the quantities which are constant within a finite volume in the two-phase n-components model
CTwoPNewtonConsistencyChecks	Consistency checks for the PNM two-phase model
CTwoPNewtonSolver	A two-phase PNM specific newton solver
CTwoPSpatialParams	The base class for spatial parameters for pore-network models
CTwoPStaticDrainage	A (quasi-) static two-phase pore-network model for drainage processes. This assumes that there are no pressure gradients within the phases and thus, no flow
CTwoPVolumeVariables	Contains the quantities which are are constant within a finite volume (the pore body) in the two-phase model
CVelocityOutput	Velocity output for pore-network models
CVtkOutputModule	Adds vtk output fields specific to pore-network models
►NProperties	The energy balance equation for a porous solid
►NTTag	Type tag for numeric models
CBoxDfmModel
CBoxFacetCouplingModel
CBoxModel
CCCMpfaFacetCouplingModel
CCCMpfaModel
CCCTpfaFacetCouplingModel
CCCTpfaModel
CElastic
CExtendedRichards
CExtendedRichardsNI
CFaceCenteredDiamondModel
CFaceCenteredStaggeredModel
CFiniteVolumeModel
CFreeFlow
CGeomechanics
CGridProperties	Type tag for numeric models
CHyperelastic
CKEpsilon	The type tag for the single-phase, isothermal k-epsilon model
CKEpsilonNC	The type tags for the single-phase, multi-component isothermal k-epsilon model
CKEpsilonNCNI	The type tags for the single-phase, multi-component non-isothermal k-epsilon models
CKEpsilonNI	The type tag for the single-phase, non-isothermal k-epsilon model
CKOmega	The type tag for the single-phase, isothermal k-omega model
CKOmegaNC	The type tags for the single-phase, multi-component isothermal k-omega model
CKOmegaNCNI	The type tags for the single-phase, multi-component non-isothermal k-omega models
CKOmegaNI	The type tag for the single-phase, non-isothermal k-omega 2-Eq. model
CLowReKEpsilon	The type tag for the single-phase, isothermal low-Reynolds k-epsilon model
CLowReKEpsilonNC	The type tags for the single-phase, multi-component isothermal low-Re k-epsilon model
CLowReKEpsilonNCNI	The type tags for the single-phase, multi-component non-isothermal low-Re k-epsilon models
CLowReKEpsilonNI	The type tag for the single-phase, non-isothermal low-Reynolds k-epsilon model
CModelProperties
CMPNC
CMPNCNI
CMPNCNonequil
CNavierStokes	The type tag for the single-phase, isothermal Navier-Stokes model
CNavierStokesMassOneP	The type tag for the single-phase, isothermal Navier-Stokes model
CNavierStokesMassOnePNC	The type tag for the single-phase, isothermal Navier-Stokes model
CNavierStokesMassOnePNCNI
CNavierStokesMassOnePNI
CNavierStokesMomentum	The type tag for the single-phase, isothermal Navier-Stokes model
CNavierStokesMomentumCVFE	The type tag for the single-phase, isothermal Navier-Stokes model
CNavierStokesNC	The type tag for the single-phase, multi-component isothermal free-flow model
CNavierStokesNCNI	The type tag for the single-phase, multi-component non-isothermal free-flow model
CNavierStokesNI	The type tag for the corresponding non-isothermal model
CNonEquilibrium
COneEq	The type tag for the single-phase, isothermal Spalart-Allmaras model
COneEqNC	The type tags for the single-phase, multi-component isothermal one-equation model
COneEqNCNI	The type tags for the single-phase, multi-component non-isothermal one-equation models
COneEqNI	The type tag for the single-phase, non-isothermal Spalart-Allmaras model
COneP	The type tags for the isothermal single phase model
COnePNC
COnePNCMin
COnePNCMinNI
COnePNCNI
COnePNCNonEquil
COnePNI	The type tags for the non-isothermal single phase model
CPNMOneP
CPNMOnePNC
CPNMOnePNCNI	The type tags for the corresponding non-isothermal problems
CPNMOnePNI	The type tags for the corresponding non-isothermal problems
CPNMSolidEnergy
CPNMTwoP
CPNMTwoPNC
CPNMTwoPNCNI	The type tags for the corresponding non-isothermal problems
CPNMTwoPNI	The type tags for the corresponding non-isothermal problems
CPoreNetworkModel
CPoroElastic
CPorousMediumFlow
CPQ1BubbleModel
CRANS	The type tag for the single-phase, isothermal Reynolds-Averaged Navier-Stokes model
CRANSNI	The type tag for the single-phase, isothermal Reynolds-Averaged Navier-Stokes model
CRichards
CRichardsNC
CRichardsNCNI
CRichardsNI
CShallowWater
CSolidEnergy
CSST	The type tag for the single-phase, isothermal SST model
CSSTNC	The type tags for the single-phase, multi-component isothermal SST model
CSSTNCNI	The type tags for the single-phase, multi-component non-isothermal SST models
CSSTNI	The type tag for the single-phase, non-isothermal SST 2-Eq. model
CStaggeredFreeFlowModel
CStaggeredModel
CThreeP	The type tags for the isothermal three-phase model
CThreePNI	The type tags for the non-isothermal three-phase model
CThreePThreeC	The type tags for the isothermal three-phase three-component model
CThreePThreeCNI	The type tags for the non-isothermal three-phase three-component model
CThreePWaterOilNI
CTracer
CTwoP	The type tag for the isothermal two-phase model
CTwoPNC
CTwoPNCMin
CTwoPNCMinNI
CTwoPNCNI
CTwoPNI	The type tag for the non-isothermal two-phase model
CTwoPOneCNI
CTwoPTwoC
CTwoPTwoCCO2
CTwoPTwoCCO2NI
CTwoPTwoCNI
CTwoPTwoCNINonEquil
CTwoPTwoCNonEquil
CZeroEq	The type tag for the single-phase, isothermal Reynolds-Averaged Navier-Stokes 0-Eq. model
CZeroEqNC	The type tags for the single-phase, multi-component isothermal ZeroEq model
CZeroEqNCNI	The type tags for the single-phase, multi-component non-isothermal ZeroEq models
CZeroEqNI	The type tag for the single-phase, non-isothermal Reynolds-Averaged Navier-Stokes model
CAdvectionType< TypeTag, TTag::BoxFacetCouplingModel >	Use the box facet coupling-specific Darcy's law
CAdvectionType< TypeTag, TTag::CCTpfaFacetCouplingModel >	Use the tpfa facet coupling-specific Darcy's law
CAdvectionType< TypeTag, TTag::PNMOneP >	The advection type
CAdvectionType< TypeTag, TTag::PNMOnePNC >	The advection type
CAdvectionType< TypeTag, TTag::PNMTwoP >	The advection type
CAdvectionType< TypeTag, TTag::PNMTwoPNC >	The advection type
CAdvectionType< TypeTag, TTag::PorousMediumFlow >	By default, we use darcy's law for the advective fluxes
CAdvectionType< TypeTag, TTag::ShallowWater >
CAdvectionType< TypeTag, TTag::Tracer >	We use darcy's law as the default for the advective fluxes
CAdvectionType< TypeTag, TTag::TwoPOneCNI >	Use a modified version of Darcy's law which allows for blocking of spurious flows
CBalanceEqOpts< TypeTag, TTag::ModelProperties >	Set the default class for the balance equation options
CBalanceEqOpts< TypeTag, TTag::Richards >	Set a richards specific class for the balance equation options
CBaseLocalResidual< TypeTag, TTag::BoxFacetCouplingModel >	Use the box local residual for models with facet coupling
CBaseLocalResidual< TypeTag, TTag::BoxModel >	Set the BaseLocalResidual to CVFELocalResidual
CBaseLocalResidual< TypeTag, TTag::CCMpfaFacetCouplingModel >	Use the cc local residual for models with facet coupling
CBaseLocalResidual< TypeTag, TTag::CCMpfaModel >	Set the BaseLocalResidual to CCLocalResidual
CBaseLocalResidual< TypeTag, TTag::CCTpfaFacetCouplingModel >	Use the cc local residual for models with facet coupling
CBaseLocalResidual< TypeTag, TTag::CCTpfaModel >	Set the BaseLocalResidual to CCLocalResidual
CBaseLocalResidual< TypeTag, TTag::FaceCenteredDiamondModel >	Set the BaseLocalResidual to CVFELocalResidual
CBaseLocalResidual< TypeTag, TTag::FaceCenteredStaggeredModel >	Set the BaseLocalResidual to FaceCenteredLocalResidual
CBaseLocalResidual< TypeTag, TTag::PQ1BubbleModel >	Set the BaseLocalResidual to CVFELocalResidual
CBaseLocalResidual< TypeTag, TTag::StaggeredModel >	Set the BaseLocalResidual to StaggeredLocalResidual
CBaseModelTraits< TypeTag, TTag::NavierStokesMassOnePNC >	The base model traits. Per default, we use the number of components of the fluid system. states some specifics of the Navier-Stokes model
CBaseModelTraits< TypeTag, TTag::OneP >	States some specifics of the one-phase model
CBaseModelTraits< TypeTag, TTag::OnePNC >	The base model traits. Per default, we use the number of components of the fluid system
CBaseModelTraits< TypeTag, TTag::RichardsNC >	Set the model traits class
CBaseModelTraits< TypeTag, TTag::ThreePThreeC >	Set the model traits
CBaseModelTraits< TypeTag, TTag::TwoP >	The base model traits class
CBaseModelTraits< TypeTag, TTag::TwoPNC >	Set the base model traits
CBaseModelTraits< TypeTag, TTag::TwoPTwoC >	Set the model traits property
CCellCenterPrimaryVariables< TypeTag, TTag::StaggeredModel >	The cell center primary variables
CCellCenterSolutionVector< TypeTag, TTag::StaggeredModel >	The type of a solution for the whole grid at a fixed time TODO: move to LinearAlgebra traits
CCompositionalDispersionModel< TypeTag, TTag::PorousMediumFlow >	By default, we use Scheideggers's law for the dispersive tensor calculation
CCouplingManager< TypeTag, TTag::NavierStokesMassOneP >
CCouplingManager< TypeTag, TTag::NavierStokesMassOnePNC >
CCouplingManager< TypeTag, TTag::NavierStokesMomentum >
►CCouplingManager< TypeTag, TTag::NavierStokesMomentumCVFE >
CEmptyCouplingManager
CDispersionFluxType< TypeTag, TTag::PorousMediumFlow >	By default, we use a diffusive flux for the dispersive fluxes
CDualGridNodalIndexSet< TypeTag, TTag::CCMpfaModel >	Set the index set type used on the dual grid nodes
CEffectiveDiffusivityModel< TypeTag, TTag::ExtendedRichards >	Use the model after Millington (1961) for the effective diffusivity
CEffectiveDiffusivityModel< TypeTag, TTag::MPNC >	Use the model after Millington (1961) for the effective diffusivity
►CEffectiveDiffusivityModel< TypeTag, TTag::NavierStokesMassOnePNC >	Use the model after Millington (1961) for the effective diffusivity
Ctype
CEffectiveDiffusivityModel< TypeTag, TTag::OnePNC >	Use the model after Millington (1961) for the effective diffusivity
CEffectiveDiffusivityModel< TypeTag, TTag::Richards >	Use the model after Millington (1961) for the effective diffusivity
CEffectiveDiffusivityModel< TypeTag, TTag::RichardsNC >	The model after Millington (1961) is used for the effective diffusivity
CEffectiveDiffusivityModel< TypeTag, TTag::ThreePThreeC >	The model after Millington (1961) is used for the effective diffusivity
CEffectiveDiffusivityModel< TypeTag, TTag::ThreePWaterOilNI >	Use the model after Millington (1961) for the effective diffusivity
CEffectiveDiffusivityModel< TypeTag, TTag::Tracer >	Use simple model with constant tortuosity as pm diffusivity model
CEffectiveDiffusivityModel< TypeTag, TTag::TwoPNC >	Use the model after Millington (1961) for the effective diffusivity
CElementBoundaryTypes< TypeTag, TTag::BoxModel >	Set the default for the ElementBoundaryTypes
CElementBoundaryTypes< TypeTag, TTag::CCMpfaModel >	Set the default for the ElementBoundaryTypes
CElementBoundaryTypes< TypeTag, TTag::CCTpfaModel >	Set the default for the ElementBoundaryTypes
CElementBoundaryTypes< TypeTag, TTag::FaceCenteredDiamondModel >	Set the default for the ElementBoundaryTypes
CElementBoundaryTypes< TypeTag, TTag::FaceCenteredStaggeredModel >	Set the default for the ElementBoundaryTypes
CElementBoundaryTypes< TypeTag, TTag::PQ1BubbleModel >	Set the default for the ElementBoundaryTypes
CElementBoundaryTypes< TypeTag, TTag::StaggeredModel >	Use the cell center element boundary types per default
CEnableBoxInterfaceSolver< TypeTag, TTag::PorousMediumFlow >	Per default, we disable the box interface solver
CEnableChemicalNonEquilibrium< TypeTag, TTag::NonEquilibrium >
CEnableChemicalNonEquilibrium< TypeTag, TTag::OnePNCNonEquil >
CEnableCompositionalDispersion< TypeTag, TTag::PorousMediumFlow >	Per default, we do not include compositional dispersion effects
CEnableGridFaceVariablesCache< TypeTag, TTag::StaggeredModel >	Cache the face variables per default
CEnableGridFluxVariablesCache< TypeTag, Dumux::Detail::HelmholtzOperator::TTag< P > >
CEnableGridFluxVariablesCache< TypeTag, TTag::FiniteVolumeModel >	Disable flux variables data caching by default
CEnableGridGeometryCache< TypeTag, Dumux::Detail::HelmholtzOperator::TTag< P > >
CEnableGridGeometryCache< TypeTag, TTag::FiniteVolumeModel >	We do not store the FVGeometry by default
CEnableGridVolumeVariablesCache< TypeTag, Dumux::Detail::HelmholtzOperator::TTag< P > >
CEnableGridVolumeVariablesCache< TypeTag, TTag::FiniteVolumeModel >	We do not store the volume variables by default
CEnableThermalDispersion< TypeTag, TTag::PorousMediumFlow >	Per default, we do not include thermal dispersion effects
CEnableThermalNonEquilibrium< TypeTag, TTag::NonEquilibrium >	Per default, we consider both thermal and chemical non-equilibrium
CEnableThermalNonEquilibrium< TypeTag, TTag::PoreNetworkModel >
CEnableThermalNonEquilibrium< TypeTag, TTag::PorousMediumFlow >
CEnergyLocalResidual< TypeTag, TTag::NonEquilibrium >
CEnergyLocalResidual< TypeTag, TTag::PNMTwoP >
CEnergyLocalResidual< TypeTag, TTag::PorousMediumFlow >	The default implementation of the energy balance equation for flow problems in porous media
CEquilibriumIOFields< TypeTag, TTag::MPNCNonequil >	Set the vtk output fields specific to this model
CEquilibriumIOFields< TypeTag, TTag::OnePNCNonEquil >	Set the vtk output fields specific to this model
CEquilibriumIOFields< TypeTag, TTag::TwoPTwoCNINonEquil >	Set the equilibrium IO fields which are in that case the nonisothermal io fields
CEquilibriumIOFields< TypeTag, TTag::TwoPTwoCNonEquil >	Set the vtk output fields specific to this model
CEquilibriumLocalResidual< TypeTag, TTag::MPNCNonequil >
CEquilibriumLocalResidual< TypeTag, TTag::OnePNCNonEquil >
CEquilibriumLocalResidual< TypeTag, TTag::TwoPTwoCNonEquil >
CEquilibriumModelTraits< TypeTag, TTag::MPNCNonequil >	Set equilibrium model traits
CEquilibriumModelTraits< TypeTag, TTag::OnePNCNonEquil >	Set equilibrium model traits
CEquilibriumModelTraits< TypeTag, TTag::TwoPTwoCNonEquil >	Set equilibrium model traits
CFacePrimaryVariables< TypeTag, TTag::StaggeredModel >	The face primary variables
CFaceSolutionVector< TypeTag, TTag::StaggeredModel >	The type of a solution for the whole grid at a fixed time TODO: move to LinearAlgebra traits
CFaceVariables< TypeTag, TTag::StaggeredFreeFlowModel >	The variables living on the faces
CFluidState< TypeTag, TTag::MPNC >	This model uses the compositional fluid state
CFluidState< TypeTag, TTag::NavierStokes >	The fluid state which is used by the volume variables to store the thermodynamic state. This should be chosen appropriately for the model ((non-)isothermal, equilibrium, ...). This can be done in the problem
CFluidState< TypeTag, TTag::NavierStokesMassOneP >	The fluid state which is used by the volume variables to store the thermodynamic state. This should be chosen appropriately for the model ((non-)isothermal, equilibrium, ...). This can be done in the problem
CFluidState< TypeTag, TTag::NavierStokesMassOnePNC >	The fluid state which is used by the volume variables to store the thermodynamic state. This should be chosen appropriately for the model ((non-)isothermal, equilibrium, ...). This can be done in the problem
CFluidState< TypeTag, TTag::NavierStokesMomentum >	The fluid state which is used by the volume variables to store the thermodynamic state. This should be chosen appropriately for the model ((non-)isothermal, equilibrium, ...). This can be done in the problem
CFluidState< TypeTag, TTag::NavierStokesMomentumCVFE >	The fluid state which is used by the volume variables to store the thermodynamic state. This should be chosen appropriately for the model ((non-)isothermal, equilibrium, ...). This can be done in the problem
CFluidState< TypeTag, TTag::NavierStokesNC >	The fluid state which is used by the volume variables to store the thermodynamic state. This should be chosen appropriately for the model ((non-)isothermal, equilibrium, ...). This can be done in the problem
CFluidState< TypeTag, TTag::NonEquilibrium >
CFluidState< TypeTag, TTag::OneP >	The fluid state which is used by the volume variables to store the thermodynamic state
CFluidState< TypeTag, TTag::OnePNC >	The fluid state which is used by the volume variables to store the thermodynamic state
CFluidState< TypeTag, TTag::Richards >	The fluid state which is used by the volume variables to store the thermodynamic state. This should be chosen appropriately for the model ((non-)isothermal, equilibrium, ...). This can be done in the problem
CFluidState< TypeTag, TTag::RichardsNC >	The fluid state which is used by the volume variables to store the thermodynamic state. This should be chosen appropriately for the model ((non-)isothermal, equilibrium, ...). This can be done in the problem
CFluidState< TypeTag, TTag::ThreeP >	The fluid state which is used by the volume variables to store the thermodynamic state
CFluidState< TypeTag, TTag::ThreePThreeC >	The fluid state which is used by the volume variables to store the thermodynamic state. This should be chosen appropriately for the model ((non-)isothermal, equilibrium, ...). This can be done in the problem
CFluidState< TypeTag, TTag::ThreePWaterOilNI >	The fluid state which is used by the volume variables to store the thermodynamic state. This should be chosen appropriately for the model ((non-)isothermal, equilibrium, ...). This can be done in the problem
CFluidState< TypeTag, TTag::TwoP >	The two-phase model uses the immiscible fluid state
CFluidState< TypeTag, TTag::TwoPNC >	This model uses the compositional fluid state
CFluidState< TypeTag, TTag::TwoPOneCNI >	The fluid state which is used by the volume variables to store the thermodynamic state. This should be chosen appropriately for the model ((non-)isothermal, equilibrium, ...). This can be done in the problem
CFluidSystem< TypeTag, TTag::Richards >	The fluid system used by the model
CFluidSystem< TypeTag, TTag::RichardsNC >	The fluid system used by the model
CFluidSystem< TypeTag, TTag::ShallowWater >
CFluxVariables< TypeTag, TTag::BoxFacetCouplingModel >	Per default, use the porous medium flow flux variables with the modified upwind scheme
CFluxVariables< TypeTag, TTag::CCMpfaFacetCouplingModel >	Per default, use the porous medium flow flux variables with the modified upwind scheme
CFluxVariables< TypeTag, TTag::CCTpfaFacetCouplingModel >	Per default, use the porous medium flow flux variables with the modified upwind scheme
CFluxVariables< TypeTag, TTag::KEpsilon >	The flux variables
CFluxVariables< TypeTag, TTag::KEpsilonNC >	The flux variables
CFluxVariables< TypeTag, TTag::KEpsilonNCNI >	The flux variables
CFluxVariables< TypeTag, TTag::KOmega >	The flux variables
CFluxVariables< TypeTag, TTag::KOmegaNC >	The flux variables
CFluxVariables< TypeTag, TTag::KOmegaNCNI >	The flux variables
CFluxVariables< TypeTag, TTag::LowReKEpsilon >	The flux variables
CFluxVariables< TypeTag, TTag::LowReKEpsilonNC >	The flux variables
CFluxVariables< TypeTag, TTag::LowReKEpsilonNCNI >	The flux variables
CFluxVariables< TypeTag, TTag::NavierStokes >	The flux variables
CFluxVariables< TypeTag, TTag::NavierStokesMassOneP >	The flux variables
►CFluxVariables< TypeTag, TTag::NavierStokesMassOnePNC >	The flux variables
CFluxTypes
►CFluxVariables< TypeTag, TTag::NavierStokesMassOnePNCNI >	The flux variables
CFluxTypes
CFluxVariables< TypeTag, TTag::NavierStokesMassOnePNI >	The flux variables
CFluxVariables< TypeTag, TTag::NavierStokesMomentum >	The flux variables
CFluxVariables< TypeTag, TTag::NavierStokesNC >	The flux variables
CFluxVariables< TypeTag, TTag::OneEq >	The flux variables
CFluxVariables< TypeTag, TTag::OneEqNC >	The flux variables
CFluxVariables< TypeTag, TTag::OneEqNCNI >	The flux variables
CFluxVariables< TypeTag, TTag::PorousMediumFlow >	The flux variables for models involving flow in porous media
CFluxVariables< TypeTag, TTag::ShallowWater >
CFluxVariables< TypeTag, TTag::SST >	The flux variables
CFluxVariables< TypeTag, TTag::SSTNC >	The flux variables
CFluxVariables< TypeTag, TTag::SSTNCNI >	The flux variables
CFluxVariablesCache< TypeTag, TTag::BoxDfmModel >	The flux variables cache class specific to box-dfm porous medium flow models
CFluxVariablesCache< TypeTag, TTag::BoxModel >	The flux variables cache type
CFluxVariablesCache< TypeTag, TTag::FaceCenteredDiamondModel >	The flux variables cache type
CFluxVariablesCache< TypeTag, TTag::Geomechanics >	The flux variables cache class for models involving flow in porous media
►CFluxVariablesCache< TypeTag, TTag::NavierStokesMassOnePNC >
Ctype
►CFluxVariablesCache< TypeTag, TTag::NavierStokesMassOnePNCNI >
Ctype
►CFluxVariablesCache< TypeTag, TTag::NavierStokesMassOnePNI >
Ctype
CFluxVariablesCache< TypeTag, TTag::PNMSolidEnergy >	The flux variables cache
CFluxVariablesCache< TypeTag, TTag::PNMTwoP >	The flux variables cache
CFluxVariablesCache< TypeTag, TTag::PNMTwoPNC >	The flux variables cache
CFluxVariablesCache< TypeTag, TTag::PoreNetworkModel >	The flux variables cache
CFluxVariablesCache< TypeTag, TTag::PorousMediumFlow >	The flux variables cache class for models involving flow in porous media
CFluxVariablesCache< TypeTag, TTag::PQ1BubbleModel >	The flux variables cache class
CFluxVariablesCacheFiller< TypeTag, TTag::NavierStokesMassOnePNC >
CFluxVariablesCacheFiller< TypeTag, TTag::NavierStokesMassOnePNCNI >
CFluxVariablesCacheFiller< TypeTag, TTag::NavierStokesMassOnePNI >
CFluxVariablesCacheFiller< TypeTag, TTag::PorousMediumFlow >
CFormulation< TypeTag, TTag::TwoP >	< Set the default formulation to pwsn
CFormulation< TypeTag, TTag::TwoPNC >	Default formulation is pw-Sn, overwrite if necessary
CFormulation< TypeTag, TTag::TwoPOneCNI >	Set the default formulation to pw-sn
CGrid< TypeTag, Dumux::Detail::HelmholtzOperator::TTag< P > >
CGridFaceVariables< TypeTag, TTag::StaggeredModel >	Set the default global face variables cache vector class
CGridFluxVariablesCache< TypeTag, TTag::BoxModel >	The grid flux variables cache vector class
CGridFluxVariablesCache< TypeTag, TTag::CCMpfaModel >	The grid volume variables vector class
CGridFluxVariablesCache< TypeTag, TTag::CCTpfaModel >	The grid flux variables cache vector class
CGridFluxVariablesCache< TypeTag, TTag::FaceCenteredDiamondModel >	Set the global flux variables cache vector class
CGridFluxVariablesCache< TypeTag, TTag::FaceCenteredStaggeredModel >	Set the global flux variables cache vector class
CGridFluxVariablesCache< TypeTag, TTag::PNMTwoP >	The grid flux variables cache vector class
CGridFluxVariablesCache< TypeTag, TTag::PNMTwoPNC >	The grid flux variables cache vector class
CGridFluxVariablesCache< TypeTag, TTag::PQ1BubbleModel >	The grid flux variables cache vector class
CGridFluxVariablesCache< TypeTag, TTag::StaggeredModel >	Set the global flux variables cache vector class
CGridGeometry< TypeTag, TTag::BoxDfmModel >	Set the default for the grid geometry
CGridGeometry< TypeTag, TTag::BoxFacetCouplingModel >	Set the default for the grid finite volume geometry
CGridGeometry< TypeTag, TTag::BoxModel >	Set the default for the grid geometry
CGridGeometry< TypeTag, TTag::CCMpfaModel >	Set the default for the grid geometry
CGridGeometry< TypeTag, TTag::CCTpfaModel >	Set the default for the grid geometry
CGridGeometry< TypeTag, TTag::FaceCenteredDiamondModel >	Set the default for the grid geometry
CGridGeometry< TypeTag, TTag::FaceCenteredStaggeredModel >	Set the default for the grid geometry
CGridGeometry< TypeTag, TTag::PoreNetworkModel >	Set the default for the grid geometry
CGridGeometry< TypeTag, TTag::PQ1BubbleModel >	Set the default for the grid geometry
CGridGeometry< TypeTag, TTag::StaggeredFreeFlowModel >	The default grid geometry
CGridVariables< TypeTag, TTag::FaceCenteredDiamondModel >	Set the grid variables (volume, flux and face variables)
CGridVariables< TypeTag, TTag::FaceCenteredStaggeredModel >	Set the grid variables (volume, flux and face variables)
CGridVariables< TypeTag, TTag::FiniteVolumeModel >	The grid variables
CGridVariables< TypeTag, TTag::NonEquilibrium >	The grid variables
CGridVariables< TypeTag, TTag::StaggeredModel >	Set the grid variables (volume, flux and face variables)
CGridVolumeVariables< TypeTag, TTag::BoxModel >	The grid volume variables vector class
CGridVolumeVariables< TypeTag, TTag::CCMpfaModel >	The grid volume variables vector class
CGridVolumeVariables< TypeTag, TTag::CCTpfaModel >	The grid volume variables vector class
CGridVolumeVariables< TypeTag, TTag::FaceCenteredDiamondModel >	The grid volume variables vector class
CGridVolumeVariables< TypeTag, TTag::FaceCenteredStaggeredModel >	The grid volume variables vector class
CGridVolumeVariables< TypeTag, TTag::PQ1BubbleModel >	The grid volume variables vector class
CGridVolumeVariables< TypeTag, TTag::StaggeredFreeFlowModel >	Set the default global volume variables cache vector class
CHeatConductionType< TypeTag, TTag::BoxFacetCouplingModel >	Use the box facet coupling-specific Fourier's law
CHeatConductionType< TypeTag, TTag::CCTpfaFacetCouplingModel >	Use the tpfa facet coupling-specific Ficks's law
CHeatConductionType< TypeTag, TTag::FreeFlow >	Use Fourier's Law as default heat conduction type
CHeatConductionType< TypeTag, TTag::NavierStokesMassOnePNCNI >
CHeatConductionType< TypeTag, TTag::NavierStokesMassOnePNI >
CHeatConductionType< TypeTag, TTag::NavierStokesNCNI >	Use Fourier's Law as default heat conduction type
CHeatConductionType< TypeTag, TTag::NonEquilibrium >
CHeatConductionType< TypeTag, TTag::PNMSolidEnergy >
CHeatConductionType< TypeTag, TTag::PoreNetworkModel >
CHeatConductionType< TypeTag, TTag::PorousMediumFlow >	By default, we use fourier's law as the default for heat conduction fluxes
CHeatConductionType< TypeTag, TTag::RANSNI >	Use Fourier's Law as default heat conduction type
CIOFields< TypeTag, TTag::ExtendedRichards >	Set the vtk output fields specific to this model
CIOFields< TypeTag, TTag::ExtendedRichardsNI >	Set the vtk output fields specific to th non-isothermal model
CIOFields< TypeTag, TTag::KEpsilon >	The specific I/O fields
CIOFields< TypeTag, TTag::KEpsilonNC >	The specific I/O fields
CIOFields< TypeTag, TTag::KEpsilonNCNI >	The specific I/O fields
CIOFields< TypeTag, TTag::KEpsilonNI >	The specific non-isothermal I/O fields
CIOFields< TypeTag, TTag::KOmega >	The specific I/O fields
CIOFields< TypeTag, TTag::KOmegaNC >	The specific I/O fields
CIOFields< TypeTag, TTag::KOmegaNCNI >	The specific I/O fields
CIOFields< TypeTag, TTag::KOmegaNI >	The specific non-isothermal I/O fields
CIOFields< TypeTag, TTag::LowReKEpsilon >	The specific I/O fields
CIOFields< TypeTag, TTag::LowReKEpsilonNC >	The specific I/O fields
CIOFields< TypeTag, TTag::LowReKEpsilonNCNI >	The specific I/O fields
CIOFields< TypeTag, TTag::LowReKEpsilonNI >	The specific non-isothermal I/O fields
CIOFields< TypeTag, TTag::ModelProperties >	Set the default to an implementation throwing a NotImplemented error
CIOFields< TypeTag, TTag::MPNC >	Set the vtk output fields specific to this model
CIOFields< TypeTag, TTag::NavierStokes >	The specific I/O fields
CIOFields< TypeTag, TTag::NavierStokesMassOneP >
CIOFields< TypeTag, TTag::NavierStokesMassOnePNC >
CIOFields< TypeTag, TTag::NavierStokesMassOnePNCNI >	Add temperature to the output
CIOFields< TypeTag, TTag::NavierStokesMassOnePNI >	Add temperature to the output
CIOFields< TypeTag, TTag::NavierStokesNC >	The specific I/O fields
CIOFields< TypeTag, TTag::NavierStokesNCNI >	The non-isothermal I/O fields
CIOFields< TypeTag, TTag::NavierStokesNI >	The specific non-isothermal I/O fields
CIOFields< TypeTag, TTag::NonEquilibrium >	Indices for non-isothermal models
CIOFields< TypeTag, TTag::OneEq >	The specific I/O fields
CIOFields< TypeTag, TTag::OneEqNC >	The specific I/O fields
CIOFields< TypeTag, TTag::OneEqNCNI >	The specific I/O fields
CIOFields< TypeTag, TTag::OneEqNI >	The specific non-isothermal I/O fields
CIOFields< TypeTag, TTag::OneP >	Default I/O fields specific to this model
CIOFields< TypeTag, TTag::OnePNC >	Set the vtk output fields specific to this model
CIOFields< TypeTag, TTag::OnePNCMin >	Use the mineralization vtk output fields
CIOFields< TypeTag, TTag::OnePNCMinNI >	Non-isothermal vtk output
CIOFields< TypeTag, TTag::OnePNCNI >	The non-isothermal vtk output fields
CIOFields< TypeTag, TTag::OnePNI >	Add temperature to the output
CIOFields< TypeTag, TTag::PNMOneP >	Default I/O fields specific to this model
CIOFields< TypeTag, TTag::PNMOnePNC >
CIOFields< TypeTag, TTag::PNMOnePNCNI >
CIOFields< TypeTag, TTag::PNMOnePNI >	Add temperature to the output
CIOFields< TypeTag, TTag::PNMSolidEnergy >	Set the vtk output fields specific to this model
CIOFields< TypeTag, TTag::PNMTwoP >
CIOFields< TypeTag, TTag::PNMTwoPNC >
CIOFields< TypeTag, TTag::PNMTwoPNCNI >	Set non-isothermal output fields
CIOFields< TypeTag, TTag::PNMTwoPNI >	Set the vtk output fields specific to the non-isothermal two-phase model
CIOFields< TypeTag, TTag::PoroElastic >	Default vtk output fields specific to this model
CIOFields< TypeTag, TTag::RANS >	The specific I/O fields
CIOFields< TypeTag, TTag::RANSNI >	The specific non-isothermal I/O fields
CIOFields< TypeTag, TTag::Richards >	Set the vtk output fields specific to this model
CIOFields< TypeTag, TTag::RichardsNC >	Set the vtk output fields specific to this model
CIOFields< TypeTag, TTag::RichardsNI >	Set the vtk output fields specific to th non-isothermal model
CIOFields< TypeTag, TTag::ShallowWater >
CIOFields< TypeTag, TTag::SolidEnergy >	Set the vtk output fields specific to this model
CIOFields< TypeTag, TTag::SST >	The specific I/O fields
CIOFields< TypeTag, TTag::SSTNC >	The specific I/O fields
CIOFields< TypeTag, TTag::SSTNCNI >	The specific I/O fields
CIOFields< TypeTag, TTag::SSTNI >	The specific non-isothermal I/O fields
CIOFields< TypeTag, TTag::ThreeP >	Set the vtk output fields specific to this model
CIOFields< TypeTag, TTag::ThreePNI >	Set non-isothermal output fields
CIOFields< TypeTag, TTag::ThreePThreeC >	Set the vtk output fields specific to this model
CIOFields< TypeTag, TTag::ThreePThreeCNI >	Set the non-isothermal vktoutputfields
CIOFields< TypeTag, TTag::ThreePWaterOilNI >	Set the non-isothermal vkt output fields
CIOFields< TypeTag, TTag::Tracer >	Set the vtk output fields specific to this model
CIOFields< TypeTag, TTag::TwoP >	Set the vtk output fields specific to the twop model
CIOFields< TypeTag, TTag::TwoPNC >	Set the vtk output fields specific to this model
CIOFields< TypeTag, TTag::TwoPNCMin >	Set the vtk output fields specific to this model
CIOFields< TypeTag, TTag::TwoPNCMinNI >	Non-isothermal vtkoutput
CIOFields< TypeTag, TTag::TwoPNCNI >	Set non-isothermal output fields
CIOFields< TypeTag, TTag::TwoPNI >	Set the vtk output fields specific to the non-isothermal twop model
CIOFields< TypeTag, TTag::TwoPOneCNI >	The non-isothermal vtk output fields
CIOFields< TypeTag, TTag::TwoPTwoCNI >	Set non-isothermal output fields
CIOFields< TypeTag, TTag::ZeroEqNC >	The specific I/O fields
CIOFields< TypeTag, TTag::ZeroEqNCNI >	The specific I/O fields
CJacobianMatrix< TypeTag, TTag::FiniteVolumeModel >	Set the type of a global jacobian matrix from the solution types TODO: move to LinearAlgebra traits
CJacobianMatrix< TypeTag, TTag::StaggeredModel >	Set the type of a global jacobian matrix from the solution types TODO: move to LinearAlgebra traits
CKEpsilonModelTraits	Traits for the k-epsilon model
CKEpsilonNCModelTraits	Traits for the low-Reynolds k-epsilon multi-component model states some specifics of the isothermal multi-component low-Reynolds k-epsilon model
CKOmegaModelTraits	Traits for the k-omega model
CKOmegaNCModelTraits	Traits for the k-omega multi-component modelstates some specifics of the isothermal multi-component k-omega model
CLabels	The pore/throat labels
CLabels< TypeTag, TTag::PoreNetworkModel >	The labels
CLocalResidual< TypeTag, Dumux::Detail::HelmholtzOperator::TTag< P > >
CLocalResidual< TypeTag, TTag::Elastic >	Use the local residual of the elastic model
CLocalResidual< TypeTag, TTag::ExtendedRichards >	The local residual operator
CLocalResidual< TypeTag, TTag::Hyperelastic >
CLocalResidual< TypeTag, TTag::KEpsilon >	The local residual
CLocalResidual< TypeTag, TTag::KEpsilonNC >	The local residual
CLocalResidual< TypeTag, TTag::KEpsilonNCNI >	The local residual
CLocalResidual< TypeTag, TTag::KOmega >	The local residual
CLocalResidual< TypeTag, TTag::KOmegaNC >	The local residual
CLocalResidual< TypeTag, TTag::KOmegaNCNI >	The local residual
CLocalResidual< TypeTag, TTag::LowReKEpsilon >	The local residual
CLocalResidual< TypeTag, TTag::LowReKEpsilonNC >	The local residual
CLocalResidual< TypeTag, TTag::LowReKEpsilonNCNI >	The local residual
CLocalResidual< TypeTag, TTag::MPNC >	Use the MpNc local residual for the MpNc model
CLocalResidual< TypeTag, TTag::NavierStokes >	The local residual
CLocalResidual< TypeTag, TTag::NavierStokesMassOneP >	The local residual
CLocalResidual< TypeTag, TTag::NavierStokesMassOnePNC >	The local residual
CLocalResidual< TypeTag, TTag::NavierStokesMomentum >	The local residual
CLocalResidual< TypeTag, TTag::NavierStokesMomentumCVFE >	The local residual
CLocalResidual< TypeTag, TTag::NavierStokesNC >	The local residual
CLocalResidual< TypeTag, TTag::NonEquilibrium >
CLocalResidual< TypeTag, TTag::OneEq >	The local residual
CLocalResidual< TypeTag, TTag::OneEqNC >	The local residual
CLocalResidual< TypeTag, TTag::OneEqNCNI >	The local residual
CLocalResidual< TypeTag, TTag::OneP >	Local residual function
CLocalResidual< TypeTag, TTag::OnePNC >	The local residual function
CLocalResidual< TypeTag, TTag::OnePNCMin >
CLocalResidual< TypeTag, TTag::PoroElastic >	Use the local residual of the poro-elastic model
CLocalResidual< TypeTag, TTag::Richards >	The local residual operator
CLocalResidual< TypeTag, TTag::RichardsNC >	Use the dedicated local residual
CLocalResidual< TypeTag, TTag::ShallowWater >
CLocalResidual< TypeTag, TTag::SolidEnergy >	Set the local residual
CLocalResidual< TypeTag, TTag::SST >	The local residual
CLocalResidual< TypeTag, TTag::SSTNC >	The local residual
CLocalResidual< TypeTag, TTag::SSTNCNI >	The local residual
CLocalResidual< TypeTag, TTag::ThreeP >	The local residual function of the conservation equations
CLocalResidual< TypeTag, TTag::ThreePThreeC >	The local residual function of the conservation equations
CLocalResidual< TypeTag, TTag::ThreePWaterOilNI >	The local residual function of the conservation equations
CLocalResidual< TypeTag, TTag::Tracer >	Use the tracer local residual function for the tracer model
CLocalResidual< TypeTag, TTag::TwoP >	Use the immiscible local residual operator for the 2p model
CLocalResidual< TypeTag, TTag::TwoPNC >	Use the compositional local residual
CLocalResidual< TypeTag, TTag::TwoPNCMin >
CLocalResidual< TypeTag, TTag::TwoPOneCNI >	The specific local residual (i.e. balance equations)
CLowReKEpsilonModelTraits	Traits for the low-Reynolds k-epsilon model
CLowReKEpsilonNCModelTraits	Traits for the low-Reynolds k-epsilon multi-component modelstates some specifics of the isothermal multi-component low-Reynolds k-epsilon model
►CModelTraits< TypeTag, Dumux::Detail::HelmholtzOperator::TTag< P > >
CTraits
CModelTraits< TypeTag, TTag::Elastic >	The model traits of the elastic model
CModelTraits< TypeTag, TTag::ExtendedRichards >	The model traits
CModelTraits< TypeTag, TTag::ExtendedRichardsNI >	Set non-isothermal model traits
CModelTraits< TypeTag, TTag::Hyperelastic >
CModelTraits< TypeTag, TTag::KEpsilon >	< states some specifics of the isothermal k-epsilon model
CModelTraits< TypeTag, TTag::KEpsilonNC >
CModelTraits< TypeTag, TTag::KEpsilonNCNI >	The model traits of the non-isothermal model
CModelTraits< TypeTag, TTag::KEpsilonNI >	The model traits of the non-isothermal model
CModelTraits< TypeTag, TTag::KOmega >	States some specifics of the isothermal k-omega model
CModelTraits< TypeTag, TTag::KOmegaNC >
CModelTraits< TypeTag, TTag::KOmegaNCNI >	The model traits of the non-isothermal model
CModelTraits< TypeTag, TTag::KOmegaNI >	The model traits of the non-isothermal model
CModelTraits< TypeTag, TTag::LowReKEpsilon >	< states some specifics of the isothermal low-Reynolds k-epsilon model
CModelTraits< TypeTag, TTag::LowReKEpsilonNC >
CModelTraits< TypeTag, TTag::LowReKEpsilonNCNI >	The model traits of the non-isothermal model
CModelTraits< TypeTag, TTag::LowReKEpsilonNI >	The model traits of the non-isothermal model
CModelTraits< TypeTag, TTag::MPNC >	Set the model traits property
CModelTraits< TypeTag, TTag::MPNCNI >	Set the non-isothermal model traits
CModelTraits< TypeTag, TTag::MPNCNonequil >
CModelTraits< TypeTag, TTag::NavierStokes >
CModelTraits< TypeTag, TTag::NavierStokesMassOneP >
CModelTraits< TypeTag, TTag::NavierStokesMassOnePNC >
CModelTraits< TypeTag, TTag::NavierStokesMassOnePNCNI >	The model traits of the non-isothermal model
CModelTraits< TypeTag, TTag::NavierStokesMassOnePNI >	The model traits of the non-isothermal model
CModelTraits< TypeTag, TTag::NavierStokesMomentum >
CModelTraits< TypeTag, TTag::NavierStokesMomentumCVFE >	< states some specifics of the Navier-Stokes model
CModelTraits< TypeTag, TTag::NavierStokesNC >	< states some specifics of the free-flow model
CModelTraits< TypeTag, TTag::NavierStokesNCNI >	The model traits of the non-isothermal model
CModelTraits< TypeTag, TTag::NavierStokesNI >	The model traits of the non-isothermal model
CModelTraits< TypeTag, TTag::NonEquilibrium >	Set the model traits
CModelTraits< TypeTag, TTag::OneEq >	< states some specifics of the isothermal Spalart-Allmaras model
CModelTraits< TypeTag, TTag::OneEqNC >
CModelTraits< TypeTag, TTag::OneEqNCNI >	The model traits of the non-isothermal model
CModelTraits< TypeTag, TTag::OneEqNI >	The model traits of the non-isothermal model
CModelTraits< TypeTag, TTag::OneP >	Default the actually used traits to the base traits
CModelTraits< TypeTag, TTag::OnePNC >	Default the actually used traits to the base traits
CModelTraits< TypeTag, TTag::OnePNCMin >	Use non-mineralization model traits with 1pnc traits
CModelTraits< TypeTag, TTag::OnePNCMinNI >	The non-isothermal model traits
CModelTraits< TypeTag, TTag::OnePNCNI >	Model traits of the non-isothermal model
CModelTraits< TypeTag, TTag::OnePNCNonEquil >
CModelTraits< TypeTag, TTag::OnePNI >	The model traits of the non-isothermal model
CModelTraits< TypeTag, TTag::PNMOnePNCNI >	Model traits of the non-isothermal model
CModelTraits< TypeTag, TTag::PNMOnePNI >	The model traits of the non-isothermal model
CModelTraits< TypeTag, TTag::PNMTwoPNCNI >	The model traits of the non-isothermal model
CModelTraits< TypeTag, TTag::PNMTwoPNI >	Model traits of the non-isothermal model
CModelTraits< TypeTag, TTag::PoroElastic >	The default model traits of the poro-elastic model
CModelTraits< TypeTag, TTag::RANS >	The model traits of the isothermal model
CModelTraits< TypeTag, TTag::RANSNI >	The model traits of the non-isothermal model
CModelTraits< TypeTag, TTag::Richards >	The model traits
CModelTraits< TypeTag, TTag::RichardsNC >
CModelTraits< TypeTag, TTag::RichardsNCNI >	Set non-isothermal model traits
CModelTraits< TypeTag, TTag::RichardsNI >	Set non-isothermal model traits
CModelTraits< TypeTag, TTag::ShallowWater >
CModelTraits< TypeTag, TTag::SolidEnergy >	Set the model traits
CModelTraits< TypeTag, TTag::SST >	States some specifics of the isothermal SST model
CModelTraits< TypeTag, TTag::SSTNC >
CModelTraits< TypeTag, TTag::SSTNCNI >	The model traits of the non-isothermal model
CModelTraits< TypeTag, TTag::SSTNI >	The model traits of the non-isothermal model
CModelTraits< TypeTag, TTag::ThreeP >	Set the model traits
CModelTraits< TypeTag, TTag::ThreePNI >	Set non-isothermal model traits
CModelTraits< TypeTag, TTag::ThreePThreeC >
CModelTraits< TypeTag, TTag::ThreePThreeCNI >	Set non-isothermal NumEq
CModelTraits< TypeTag, TTag::ThreePWaterOilNI >	Set the non-isothermal model traits property
CModelTraits< TypeTag, TTag::Tracer >	Set the model traits
CModelTraits< TypeTag, TTag::TwoP >	Default the actually used traits to the base traits
CModelTraits< TypeTag, TTag::TwoPNC >	Default the actually used traits to the base traits
CModelTraits< TypeTag, TTag::TwoPNCMin >	The 2pnc model traits define the non-mineralization part
CModelTraits< TypeTag, TTag::TwoPNCMinNI >	Set non-isothermal model traits
CModelTraits< TypeTag, TTag::TwoPNCNI >	Set the non-isothermal model traits
CModelTraits< TypeTag, TTag::TwoPNI >	The non-isothermal model traits class
CModelTraits< TypeTag, TTag::TwoPOneCNI >	Set the non-isothermal model traits
CModelTraits< TypeTag, TTag::TwoPTwoC >
CModelTraits< TypeTag, TTag::TwoPTwoCNI >	Set the non-isothermal model traits
CModelTraits< TypeTag, TTag::TwoPTwoCNINonEquil >	Set the non-isothermal model traits with the nonequilibrium model traits as isothermal traits
CModelTraits< TypeTag, TTag::TwoPTwoCNonEquil >
CModelTraits< TypeTag, TTag::ZeroEq >
CModelTraits< TypeTag, TTag::ZeroEqNC >	The model traits of the isothermal model
CModelTraits< TypeTag, TTag::ZeroEqNCNI >	The model traits of the non-isothermal model
CModelTraits< TypeTag, TTag::ZeroEqNI >	The model traits of the non-isothermal model
CMolecularDiffusionType< TypeTag, TTag::BoxFacetCouplingModel >	Use the box facet coupling-specific Ficks's law
CMolecularDiffusionType< TypeTag, TTag::CCTpfaFacetCouplingModel >	Use the tpfa facet coupling-specific Ficks's law
CMolecularDiffusionType< TypeTag, TTag::NavierStokesMassOnePNC >	By default, we use fick's law for the diffusive fluxes
CMolecularDiffusionType< TypeTag, TTag::NavierStokesNC >	Use Fick's law for molecular diffusion per default
CMolecularDiffusionType< TypeTag, TTag::PNMOnePNC >	We use fick's law as the default for the diffusive fluxes
CMolecularDiffusionType< TypeTag, TTag::PNMTwoPNC >	We use fick's law as the default for the diffusive fluxes
CMolecularDiffusionType< TypeTag, TTag::PorousMediumFlow >	By default, we use fick's law for the diffusive fluxes
CNormalizePressure< TypeTag, TTag::NavierStokes >	Normalize the pressure term in the momentum balance by default
CNormalizePressure< TypeTag, TTag::NavierStokesMomentum >	Normalize the pressure term in the momentum balance by default
CNormalizePressure< TypeTag, TTag::NavierStokesNC >	Normalize the pressure term in the momentum balance by default
CNumEnergyEqFluid< TypeTag, TTag::NonEquilibrium >
CNumEnergyEqSolid< TypeTag, TTag::NonEquilibrium >	Default values for the number of energy balance equations
CNumEqCellCenter< TypeTag, TTag::StaggeredFreeFlowModel >	For free flow models, we take the number of "physical" equations (e.g. 4 for a 3D NavierStokes problem, 3 velocity components and pressure) and subtract the number of dimensions. This yields the number of equations to be solved on the cell centers. Works also for non-isothermal models
CNumEqFace< TypeTag, TTag::StaggeredFreeFlowModel >	Set the number of equations on the faces to 1. We only consider scalar values because the velocity vector is normal to the face
CNusseltFormulation< TypeTag, TTag::NonEquilibrium >
COneEqModelTraits	Traits for the Spalart-Allmaras model
COneEqNCModelTraits	Traits for the one-equation multi-component modelstates some specifics of the isothermal multi-component one-equation model
COnlyGasPhaseCanDisappear< TypeTag, TTag::ThreePWaterOilNI >	Determines whether a constraint solver should be used explicitly
CPointSource< TypeTag, TTag::GridProperties >	Use the minimal point source implementation as default
CPointSourceHelper< TypeTag, TTag::GridProperties >	Use the point source helper using the bounding box tree as a default
CPressureFormulation< TypeTag, TTag::MPNC >	Set the default pressure formulation to the pressure of the (most) wetting phase
CPrimaryInteractionVolume< TypeTag, TTag::CCMpfaFacetCouplingModel >	Use the facet coupling-specific mpfa-o interaction volume
CPrimaryInteractionVolume< TypeTag, TTag::CCMpfaModel >	Per default, we use the dynamic mpfa-o interaction volume
CPrimaryVariables< TypeTag, Dumux::Detail::HelmholtzOperator::TTag< P > >	Set the default primary variable vector to a vector of size of number of equations
CPrimaryVariables< TypeTag, TTag::ExtendedRichards >	The primary variables vector for the richards model
CPrimaryVariables< TypeTag, TTag::ModelProperties >	Set the default primary variable vector to a vector of size of number of equations
CPrimaryVariables< TypeTag, TTag::PNMTwoPNC >	The primary variables vector for the 2pnc model
CPrimaryVariables< TypeTag, TTag::ThreePThreeC >	The primary variables vector for the 3p3c model
CPrimaryVariables< TypeTag, TTag::ThreePWaterOilNI >	The primary variables vector for the 3p water oil non-isothermal model
CPrimaryVariables< TypeTag, TTag::TwoPNC >	The primary variables vector for the 2pnc model
CPrimaryVariables< TypeTag, TTag::TwoPOneCNI >	The primary variables vector for the 2p1cni model
CProblem< TypeTag, Dumux::Detail::HelmholtzOperator::TTag< P > >
CPropertyAlias	Tag to specify a direct alias for property extraction
CRANSModelTraits	Traits for the Reynolds-averaged Navier-Stokes model
CReplaceCompEqIdx< TypeTag, TTag::MPNC >	Per default, no component mass balance is replaced
CReplaceCompEqIdx< TypeTag, TTag::NavierStokesNC >
CReplaceCompEqIdx< TypeTag, TTag::OnePNC >	Set as default that no component mass balance is replaced by the total mass balance
CReplaceCompEqIdx< TypeTag, TTag::PNMOnePNC >	Set as default that no component mass balance is replaced by the total mass balance
CReplaceCompEqIdx< TypeTag, TTag::RichardsNC >
CReplaceCompEqIdx< TypeTag, TTag::ThreePThreeC >	Set as default that no component mass balance is replaced by the total mass balance
CReplaceCompEqIdx< TypeTag, TTag::ThreePWaterOilNI >	Set as default that no component mass balance is replaced by the total mass balance
CReplaceCompEqIdx< TypeTag, TTag::TwoPNC >	Per default, no component mass balance is replaced
CScalar< TypeTag, Dumux::Detail::HelmholtzOperator::TTag< P > >	Set the default type of scalar values to double
CScalar< TypeTag, TTag::ModelProperties >	Set the default type of scalar values to double
CSecondaryInteractionVolume< TypeTag, TTag::CCMpfaFacetCouplingModel >	Use the facet coupling-specific mpfa-o interaction volume
CSecondaryInteractionVolume< TypeTag, TTag::CCMpfaModel >	Per default, we use the dynamic mpfa-o interaction volume on boundaries
CSetMoleFractionsForFirstPhase< TypeTag, TTag::TwoPNC >	Set the primary variables mole fractions for the wetting or nonwetting phase
CSherwoodFormulation< TypeTag, TTag::NonEquilibrium >	Set the default formulation for the sherwood correlation Other possible parametrizations can be found in the dimensionlessnumbers
CSolidState< TypeTag, TTag::Geomechanics >	The solid state must be inert
CSolidState< TypeTag, TTag::OnePNCMin >	The two-phase model uses the immiscible fluid state
CSolidState< TypeTag, TTag::PorousMediumFlow >	Per default solid state is inert
CSolidState< TypeTag, TTag::TwoPNCMin >	The two-phase model uses the immiscible fluid state
CSolidSystem< TypeTag, TTag::Geomechanics >	Per default we use one constant component in the inert solid system
CSolidSystem< TypeTag, TTag::PorousMediumFlow >
CSolutionDependentAdvection< TypeTag, TTag::PorousMediumFlow >	By default, parameters are solution-dependent
CSolutionDependentHeatConduction< TypeTag, TTag::NavierStokesMassOnePNCNI >
CSolutionDependentHeatConduction< TypeTag, TTag::NavierStokesMassOnePNI >
CSolutionDependentHeatConduction< TypeTag, TTag::PorousMediumFlow >
CSolutionDependentMolecularDiffusion< TypeTag, TTag::NavierStokesMassOnePNC >
CSolutionDependentMolecularDiffusion< TypeTag, TTag::PorousMediumFlow >
CSolutionVector< TypeTag, TTag::FiniteVolumeModel >	The type of a solution for the whole grid at a fixed time TODO: move to LinearAlgebra traits
CSolutionVector< TypeTag, TTag::StaggeredModel >	Default property value for the solution vector only used for monolithic solver TODO: move to LinearAlgebra traits
CSpatialParams< TypeTag, TTag::FreeFlow >
CSpatialParams< TypeTag, TTag::Hyperelastic >
CSpatialParams< TypeTag, TTag::NavierStokesMassOneP >
CSpatialParams< TypeTag, TTag::NavierStokesMassOnePNC >
CSpatialParams< TypeTag, TTag::PNMOneP >
CSpatialParams< TypeTag, TTag::PNMOnePNC >
CSpatialParams< TypeTag, TTag::PNMSolidEnergy >
CSpatialParams< TypeTag, TTag::PNMTwoP >
CSpatialParams< TypeTag, TTag::PNMTwoPNC >
CSSTModelTraits	Traits for the sst model
CSSTNCModelTraits	Traits for the SST multi-component modelstates some specifics of the isothermal multi-component sst model
CStaggeredFaceSolution< TypeTag, TTag::StaggeredModel >	Set the face solution type
CStressType< TypeTag, TTag::Elastic >	By default, we use hooke's law for stress evaluations
CStressType< TypeTag, TTag::PoroElastic >	Per default, we use effective stresses on the basis of Hooke's Law
CThermalConductivityModel< TypeTag, TTag::ExtendedRichardsNI >	Somerton is used as default model to compute the effective thermal heat conductivity
CThermalConductivityModel< TypeTag, TTag::MPNCNI >	Somerton is used as default model to compute the effective thermal heat conductivity
CThermalConductivityModel< TypeTag, TTag::MPNCNonequil >	In case we do not assume full non-equilibrium one needs a thermal conductivity
►CThermalConductivityModel< TypeTag, TTag::NavierStokesMassOnePNCNI >	Use the average for effective conductivities
Ctype
►CThermalConductivityModel< TypeTag, TTag::NavierStokesMassOnePNI >	Use the average for effective conductivities
Ctype
CThermalConductivityModel< TypeTag, TTag::OnePNCMinNI >	Use the average for effective conductivities
CThermalConductivityModel< TypeTag, TTag::OnePNCNI >	Use the average for effective conductivities
CThermalConductivityModel< TypeTag, TTag::OnePNCNonEquil >	In case we do not assume full non-equilibrium one needs a thermal conductivity
CThermalConductivityModel< TypeTag, TTag::OnePNI >	Use the average for effective conductivities
CThermalConductivityModel< TypeTag, TTag::PNMOnePNCNI >	Use the average for effective conductivities
CThermalConductivityModel< TypeTag, TTag::PNMOnePNI >	Use the average for effective conductivities
CThermalConductivityModel< TypeTag, TTag::PNMTwoPNCNI >
CThermalConductivityModel< TypeTag, TTag::PNMTwoPNI >	Use the average for effective conductivities
CThermalConductivityModel< TypeTag, TTag::RichardsNCNI >	Average is used as default model to compute the effective thermal heat conductivity
CThermalConductivityModel< TypeTag, TTag::RichardsNI >	Somerton is used as default model to compute the effective thermal heat conductivity
CThermalConductivityModel< TypeTag, TTag::SolidEnergy >	Use the average for effective conductivities
CThermalConductivityModel< TypeTag, TTag::ThreePNI >	Somerton is used as default model to compute the effective thermal heat conductivity
CThermalConductivityModel< TypeTag, TTag::ThreePThreeCNI >	Somerton is used as default model to compute the effective thermal heat conductivity
CThermalConductivityModel< TypeTag, TTag::ThreePWaterOilNI >	Somerton is used as default model to compute the effective thermal heat conductivity
CThermalConductivityModel< TypeTag, TTag::TwoPNCMinNI >	Use the effective thermal conductivities calculated using the Somerton method
CThermalConductivityModel< TypeTag, TTag::TwoPNCNI >	Somerton is used as default model to compute the effective thermal heat conductivity
CThermalConductivityModel< TypeTag, TTag::TwoPNI >	Somerton is used as default model to compute the effective thermal heat conductivity
CThermalConductivityModel< TypeTag, TTag::TwoPOneCNI >	Somerton is used as default model to compute the effective thermal heat conductivity
CThermalConductivityModel< TypeTag, TTag::TwoPTwoCNI >	Somerton is used as default model to compute the effective thermal heat conductivity
CThermalConductivityModel< TypeTag, TTag::TwoPTwoCNINonEquil >	Somerton is used as default model to compute the effective thermal heat conductivity
CThermalConductivityModel< TypeTag, TTag::TwoPTwoCNonEquil >
CThermalDispersionModel< TypeTag, TTag::PorousMediumFlow >	By default, we use the same dispersion tensor type as the componsitonal dispersion for the thermal disperion tensor
CUndefinedProperty	Tag to mark properties as undefined
CUpwindSchemeOrder< TypeTag, TTag::StaggeredFreeFlowModel >	Set the order of the upwinding scheme to 1 by default
CUseBlockingOfSpuriousFlow	Determines whether blocking of spurious flow is used or not
CUseBlockingOfSpuriousFlow< TypeTag, TTag::TwoPOneCNI >	Do not block spurious flows by default
CUseConstraintSolver< TypeTag, TTag::ThreePThreeC >	Determines whether a constraint solver should be used explicitly
CUseConstraintSolver< TypeTag, TTag::TwoPTwoC >	Determines whether the constraint solver is used
CUseMoles< TypeTag, TTag::MPNC >	Use mole fractions in the balance equations by default
CUseMoles< TypeTag, TTag::NavierStokesNC >	Defines whether molar (true) or mass (false) density is used
CUseMoles< TypeTag, TTag::OnePNC >	Use mole fractions in the balance equations by default
CUseMoles< TypeTag, TTag::PNMOnePNC >
CUseMoles< TypeTag, TTag::RichardsNC >	Define that per default mole fractions are used in the balance equations
CUseMoles< TypeTag, TTag::ThreePThreeC >	Use mole fractions in the balance equations by default
CUseMoles< TypeTag, TTag::ThreePWaterOilNI >
CUseMoles< TypeTag, TTag::Tracer >	Define that mole fractions are used in the balance equations
CUseMoles< TypeTag, TTag::TwoPNC >	Use mole fractions in the balance equations by default
CVelocityOutput< TypeTag, TTag::Geomechanics >	The (currently empty) velocity output
CVelocityOutput< TypeTag, TTag::PoreNetworkModel >
CVelocityOutput< TypeTag, TTag::PorousMediumFlow >	Velocity output
CVelocityOutput< TypeTag, TTag::Richards >
CVelocityOutput< TypeTag, TTag::StaggeredFreeFlowModel >	The velocity output
CViscousFluxType< TypeTag, TTag::ShallowWater >
►CVolumeVariables< TypeTag, Dumux::Detail::HelmholtzOperator::TTag< P > >
CTraits
CVolumeVariables< TypeTag, TTag::Elastic >	Set the volume variables property
CVolumeVariables< TypeTag, TTag::ExtendedRichards >	Set the volume variables property
CVolumeVariables< TypeTag, TTag::ExtendedRichardsNI >	Set the volume variables property
CVolumeVariables< TypeTag, TTag::Hyperelastic >	Set the volume variables property
CVolumeVariables< TypeTag, TTag::KEpsilon >	Set the volume variables property
CVolumeVariables< TypeTag, TTag::KEpsilonNC >	Set the volume variables property
CVolumeVariables< TypeTag, TTag::KEpsilonNCNI >	Set the volume variables property
CVolumeVariables< TypeTag, TTag::KEpsilonNI >	Set the volume variables property
CVolumeVariables< TypeTag, TTag::KOmega >	Set the volume variables property
CVolumeVariables< TypeTag, TTag::KOmegaNC >	Set the volume variables property
CVolumeVariables< TypeTag, TTag::KOmegaNCNI >	Set the volume variables property
CVolumeVariables< TypeTag, TTag::KOmegaNI >	Set the volume variables property
CVolumeVariables< TypeTag, TTag::LowReKEpsilon >	Set the volume variables property
CVolumeVariables< TypeTag, TTag::LowReKEpsilonNC >	Set the volume variables property
CVolumeVariables< TypeTag, TTag::LowReKEpsilonNCNI >	Set the volume variables property
CVolumeVariables< TypeTag, TTag::LowReKEpsilonNI >	Set the volume variables property
CVolumeVariables< TypeTag, TTag::MPNC >	Set the volume variables property
CVolumeVariables< TypeTag, TTag::MPNCNI >	Set the volume variables property
CVolumeVariables< TypeTag, TTag::MPNCNonequil >	Use the mineralization volume variables together with the 2pnc vol vars
CVolumeVariables< TypeTag, TTag::NavierStokes >	Set the volume variables property
CVolumeVariables< TypeTag, TTag::NavierStokesMassOneP >	Set the volume variables property
CVolumeVariables< TypeTag, TTag::NavierStokesMassOnePNC >	Set the volume variables property
CVolumeVariables< TypeTag, TTag::NavierStokesMassOnePNCNI >	Set the volume variables property
CVolumeVariables< TypeTag, TTag::NavierStokesMassOnePNI >	Set the volume variables property
CVolumeVariables< TypeTag, TTag::NavierStokesMomentum >	Set the volume variables property
CVolumeVariables< TypeTag, TTag::NavierStokesMomentumCVFE >	Set the volume variables property
CVolumeVariables< TypeTag, TTag::NavierStokesNC >	Set the volume variables property
CVolumeVariables< TypeTag, TTag::OneEq >	Set the volume variables property
CVolumeVariables< TypeTag, TTag::OneEqNC >	Set the volume variables property
CVolumeVariables< TypeTag, TTag::OneEqNCNI >	Set the volume variables property
CVolumeVariables< TypeTag, TTag::OneEqNI >	Set the volume variables property
CVolumeVariables< TypeTag, TTag::OneP >	Set the volume variables property
CVolumeVariables< TypeTag, TTag::OnePNC >	Set the volume variables property
CVolumeVariables< TypeTag, TTag::OnePNCMin >	Use the mineralization volume variables together with the 1pnc vol vars
CVolumeVariables< TypeTag, TTag::OnePNCMinNI >	Use the mineralization volume variables together with the 1pnc vol vars
CVolumeVariables< TypeTag, TTag::OnePNCNI >
CVolumeVariables< TypeTag, TTag::OnePNCNonEquil >	Use the mineralization volume variables together with the 2pnc vol vars
CVolumeVariables< TypeTag, TTag::OnePNI >	Set the volume variables property
CVolumeVariables< TypeTag, TTag::PNMOneP >	Set the volume variables property
CVolumeVariables< TypeTag, TTag::PNMOnePNC >	Set the volume variables property Set the vtk output fields specific to this model
CVolumeVariables< TypeTag, TTag::PNMOnePNCNI >
CVolumeVariables< TypeTag, TTag::PNMOnePNI >	Set the volume variables property
CVolumeVariables< TypeTag, TTag::PNMSolidEnergy >	Set the volume variables property
CVolumeVariables< TypeTag, TTag::PNMTwoP >	Set the volume variables property
CVolumeVariables< TypeTag, TTag::PNMTwoPNC >	Set the volume variables property
CVolumeVariables< TypeTag, TTag::PNMTwoPNCNI >	Set the volume variables property
CVolumeVariables< TypeTag, TTag::PNMTwoPNI >	Set the volume variables property
CVolumeVariables< TypeTag, TTag::PoroElastic >	Set the volume variables property
CVolumeVariables< TypeTag, TTag::Richards >	Set the volume variables property
CVolumeVariables< TypeTag, TTag::RichardsNC >	Set the volume variables property
CVolumeVariables< TypeTag, TTag::RichardsNCNI >	Set the volume variables property
CVolumeVariables< TypeTag, TTag::RichardsNI >	Set the volume variables property
CVolumeVariables< TypeTag, TTag::ShallowWater >
CVolumeVariables< TypeTag, TTag::SolidEnergy >	Set the volume variables property
CVolumeVariables< TypeTag, TTag::SST >	Set the volume variables property
CVolumeVariables< TypeTag, TTag::SSTNC >	Set the volume variables property
CVolumeVariables< TypeTag, TTag::SSTNCNI >	Set the volume variables property
CVolumeVariables< TypeTag, TTag::SSTNI >	Set the volume variables property
CVolumeVariables< TypeTag, TTag::ThreeP >	Set the volume variables property
CVolumeVariables< TypeTag, TTag::ThreePNI >	Set the volume variables property
CVolumeVariables< TypeTag, TTag::ThreePThreeC >	Set the volume variables property
CVolumeVariables< TypeTag, TTag::ThreePThreeCNI >	Set the volume variables property
CVolumeVariables< TypeTag, TTag::ThreePWaterOilNI >	Set the volume variables property
CVolumeVariables< TypeTag, TTag::Tracer >	Set the volume variables property
CVolumeVariables< TypeTag, TTag::TwoP >	Set the volume variables property
CVolumeVariables< TypeTag, TTag::TwoPNC >	Set the volume variables property
CVolumeVariables< TypeTag, TTag::TwoPNCMin >	Use the mineralization volume variables together with the 2pnc vol vars
CVolumeVariables< TypeTag, TTag::TwoPNCMinNI >	Set the volume variables property
CVolumeVariables< TypeTag, TTag::TwoPNCNI >	Set the volume variables property
CVolumeVariables< TypeTag, TTag::TwoPNI >	Set the volume variables property
CVolumeVariables< TypeTag, TTag::TwoPOneCNI >	Set the volume variables property
CVolumeVariables< TypeTag, TTag::TwoPTwoC >	Use the 2p2c VolumeVariables
CVolumeVariables< TypeTag, TTag::TwoPTwoCCO2 >	Co2 volume variables use the same traits as the 2p2c model
CVolumeVariables< TypeTag, TTag::TwoPTwoCCO2NI >
CVolumeVariables< TypeTag, TTag::TwoPTwoCNI >	Set the volume variables property
CVolumeVariables< TypeTag, TTag::TwoPTwoCNINonEquil >	Use the nonequilibrium volume variables together with the 2p2c vol vars
CVolumeVariables< TypeTag, TTag::TwoPTwoCNonEquil >	Use the nonequilibrium volume variables together with the 2p2c vol vars
CVolumeVariables< TypeTag, TTag::ZeroEq >	Set the volume variables property
CVolumeVariables< TypeTag, TTag::ZeroEqNC >	Set the volume variables property
CVolumeVariables< TypeTag, TTag::ZeroEqNCNI >	Set the volume variables property
CVolumeVariables< TypeTag, TTag::ZeroEqNI >	Set the volume variables property
CZeroEqModelTraits	Traits for the ZeroEq model
CZeroEqNCModelTraits	Traits for the Reynolds-averaged Navier-Stokes 0-Eq. model
►NPython
►NDetail
CCharge
CCriticalPressure
CCriticalTemperature
CDisableStaticAssert	Helper struct to deactivate static assertions in component's base classes
CGasDensity
CGasEnthalpy
CGasHeatCapacity
CGasInternalEnergy
CGasIsCompressible
CGasIsIdeal
CGasMolarDensity
CGasThermalConductivity
CGasViscosity
CLiquidDensity
CLiquidEnthalpy
CLiquidHeatCapacity
CLiquidInternalEnergy
CLiquidIsCompressible
CLiquidMolarDensity
CLiquidThermalConductivity
CLiquidViscosity
CMolarMass
CName
CSolidDensity
CSolidHeatCapacity
CSolidIsCompressible
CSolidThermalConductivity
CVaporPressure
CFVProblem	A C++ wrapper for a Python problem
CFVSpatialParams	The base class for spatial parameters used with finite-volume schemes
CFVSpatialParamsOneP
CPorousMediumFlowProblem	A C++ wrapper for a Python PorousMediumFlow problem
►NShallowWater
CRiemannSolution
►NSolidSystems
CCompositionalSolidPhase	A solid phase consisting of multiple inert solid components
COneCSolid	The simplest solid phase consisting of a single solid component
►NTemp
►NCapabilities
CcanCommunicate
►NTriangulationPolicy
CConvexHullPolicy
CDelaunayPolicy	Delaunay-type triangulations
CMidPointPolicy
►NUtility
CTag	Helper class to create (named and comparable) tagged types Tags any given type. The tagged type is equality comparable and can be written to streams. A custom name can be provided by implementing the name() member function
►NVtk
CField	Struct that can hold any field that fulfills the VTKFunction interface
CVectorP0VTKFunction	VTK function that supports both scalar and vector values for each element
CVectorP1FaceNonConformingVTKFunction	A VTK function that supports both scalar and vector values for each face. This expects the data to be organized by a two-dimensional field storing for each element the element-local nodal values. Used for non-conforming spaces such as Rannacher-Turek and Crouzeix-Raviart
CVectorP1NonConformingVTKFunction	A VTK function that supports both scalar and vector values for each vertex. This expects the data to be organized by a two-dimensional field storing for each element the element-local nodal values. This can be used for the output of fields that are non-conforming due to e.g. constitutive relationships and where no extra degrees of freedom exist to display the discontinuities
CVectorP1VTKFunction	VTK function that supports both scalar and vector values for each vertex
CAABBDistanceField	Class to calculate the closest distance from a point to a given set of geometries describing the domain's boundaries. Internally uses an AABB tree representation of the geometries for logarithmic distance queries
CAdaptiveGridRestart	Indices denoting the different grid types
CAdaptiveGridRestart< Grid, true >	Provides a restart functionality for adaptive grids
CAdvectionCacheChooser
CAdvectionCacheChooser< TypeTag, true >
CAdvectionDataHandle	Data handle for quantities related to advection
CAdvectionDataHandle< MatVecTraits, PhysicsTraits, false >	Process-dependent data handles when related process is disabled
CAdvectiveFlux< NavierStokesEnergyModelTraits< NavierStokesMassOnePModelTraits > >
CAdvectiveFlux< NavierStokesEnergyModelTraits< NavierStokesMassOnePNCModelTraits< nComp, useM, repCompEqIdx > > >
CAdvectiveFlux< NavierStokesMassOnePModelTraits, T >	Helper struct defining the advective fluxes of the single-phase flow Navier-Stokes mass model
CAdvectiveFlux< NavierStokesMassOnePNCModelTraits< nComp, useM, repCompEqIdx > >	Helper struct defining the advective fluxes of the single-phase flow multicomponent Navier-Stokes mass model
CAlwaysFalse	Template which always yields a false value
CAlwaysFalse< Components::Detail::DisableStaticAssert >
CAlwaysFalse< Dumux::Python::Detail::DisableStaticAssert >	Specialization of Dumux::AlwaysFalse for the struct defined above. This is done in order to deactivate the static_assert in the base classes of components. If the base class function is compiled we do not call it (see below)
CBalanceEquationOptions	Traits class to set options used by the local residual when when evaluating the balance equations
CBaseGridGeometry	Base class for all grid geometries
CBaseStaggeredGeometryHelper	Base class for a staggered grid geometry helper
CBasicGridGeometry	An implementation of a grid geometry with some basic features
CBasicVolumeVariables
CBlockDiagAMGBiCGSTABSolver	A simple ilu0 block diagonal preconditioned BiCGSTABSolver
CBlockDiagAMGPreconditioner	A simple ilu0 block diagonal preconditioner
CBlockDiagILU0BiCGSTABSolver	A simple ilu0 block diagonal preconditioned BiCGSTABSolver
CBlockDiagILU0Preconditioner	A simple ilu0 block diagonal preconditioner
CBlockDiagILU0RestartedGMResSolver	A simple ilu0 block diagonal preconditioned RestartedGMResSolver
CBoundaryFlag	Boundary flag to store e.g. in sub control volume faces
CBoundarySegmentIndexFlag	Class for accessing boundary flags
►CBoundaryTypes	Class to specify the type of a boundary
CBoundaryInfo	Use bitfields to minimize the size
CBoundingBoxTree	An axis-aligned bounding box volume tree implementation
CBoundingBoxTreePointSourceHelper	A helper class calculating a sub control volume to point source map This class uses the bounding box tree implementation to identify in which sub control volume(s) a point source falls
CBoxDefaultGridGeometryTraits	The default traits for the box finite volume grid geometry Defines the scv and scvf types and the mapper types
CBoxDefaultScvfGeometryTraits	Default traits class to be used for the sub-control volume faces for the box scheme
CBoxDefaultScvGeometryTraits	Default traits class to be used for the sub-control volumes for the box scheme
CBoxDfmDefaultGridGeometryTraits	The default traits for the box finite volume grid geometry
CBoxDfmDefaultScvfGeometryTraits	Default traits class to be used for the sub-control volume faces for the box discrete fracture scheme
CBoxDfmDefaultScvGeometryTraits	Default traits class to be used for the sub-control volumes for the box discrete fracture scheme
CBoxDfmFluxVariablesCache	We only store discretization-related quantities for the box method. However, we cannot reuse the cache of the standard box method as we have to take into account the scvs that lie on fracture facets
CBoxDfmFVElementGeometry	Base class for the finite volume geometry vector for box discrete fracture model
CBoxDfmFVElementGeometry< GG, false >	Specialization in case the FVElementGeometries are not stored
CBoxDfmFVElementGeometry< GG, true >	Specialization in case the FVElementGeometries are stored
CBoxDfmFVGridGeometry	Base class for the finite volume geometry vector for box schemes
CBoxDfmFVGridGeometry< Scalar, GV, false, Traits >	Base class for the finite volume geometry vector for box schemes This builds up the sub control volumes and sub control volume faces
CBoxDfmFVGridGeometry< Scalar, GV, true, Traits >	Base class for the finite volume geometry vector for box schemes that consider extra connectivity between grid vertices on marked codim one entities
CBoxDfmGeometryHelper	Create sub control volumes and sub control volume face geometries
CBoxDfmGeometryHelper< GridView, 2, ScvType, ScvfType >	A class to create sub control volume and sub control volume face geometries per element
CBoxDfmGeometryHelper< GridView, 3, ScvType, ScvfType >	A class to create sub control volume and sub control volume face geometries per element
►CBoxDfmMLGeometryTraits
CCornerStorage
ChasSingleGeometryType
CBoxDfmSubControlVolume	Sub control volume for the box discrete fracture scheme
CBoxDfmSubControlVolumeFace	Class for a sub control volume face in the box discrete fracture method, i.e a part of the boundary of a sub control volume we compute fluxes on
CBoxDfmVtkOutputModule	A VTK output module to simplify writing dumux simulation data to VTK format
CBoxFacetCouplingDarcysLaw	Darcy's law for the box scheme in the context of coupled models where coupling occurs across the facets of the bulk domain elements with a lower-dimensional domain living on these facets
CBoxFacetCouplingDefaultGridGeometryTraits	The default traits for the finite volume grid geometry of the box scheme with coupling occurring across the element facets. Defines the scv and scvf types and the mapper types
CBoxFacetCouplingFicksLaw	Ficks's law for the box scheme in the context of coupled models where coupling occurs across the facets of the bulk domain elements with a lower-dimensional domain living on these facets
CBoxFacetCouplingFouriersLaw	Fourier's law for the box scheme in the context of coupled models where coupling occurs across the facets of the bulk domain elements with a lower-dimensional domain living on these facets
CBoxFacetCouplingFVElementGeometry	Base class for the element-local finite volume geometry for box models in the context of models considering coupling of different domains across the bulk grid facets. This builds up the sub control volumes and sub control volume faces for an element
CBoxFacetCouplingFVElementGeometry< GG, false >	Specialization in case the geometries are not stored grid-wide
CBoxFacetCouplingFVElementGeometry< GG, true >	Specialization in case the FVElementGeometries are stored
CBoxFacetCouplingFVGridGeometry	Base class for the finite volume geometry vector for box schemes in the context of coupled models where the coupling occurs across the element facets. This builds up the sub control volumes and sub control volume faces
CBoxFacetCouplingFVGridGeometry< Scalar, GV, false, Traits >	Base class for the finite volume geometry vector for box schemes This builds up the sub control volumes and sub control volume faces
CBoxFacetCouplingFVGridGeometry< Scalar, GV, true, Traits >	Base class for the finite volume geometry vector for box schemes in the context of coupled models where the coupling occurs across the element facets. This builds up the sub control volumes and sub control volume faces
CBoxFacetCouplingLocalResidual	The element-wise residual for the box scheme
CBoxFacetCouplingSubControlVolumeFace	Class for a sub control volume face in the box method, i.e a part of the boundary of a sub control volume we compute fluxes on. This is a specialization for models considering coupling of different domains across the bulk grid facets
CBoxFacetCouplingUpwindScheme	The upwind scheme used for the advective fluxes. This is a modified scheme for models involving coupling with a lower-dimensional domain across the element facets
CBoxForchheimersLaw	Forchheimer's law for box scheme
CBoxFVElementGeometry	Base class for the finite volume geometry vector for box models This builds up the sub control volumes and sub control volume faces for each element
CBoxFVElementGeometry< GG, false >	Specialization in case the FVElementGeometries are not stored
CBoxFVElementGeometry< GG, true >	Specialization in case the FVElementGeometries are stored
CBoxFVGridGeometry	Base class for the finite volume geometry vector for box schemes This builds up the sub control volumes and sub control volume faces
CBoxFVGridGeometry< Scalar, GV, false, Traits >	Base class for the finite volume geometry vector for box schemes This builds up the sub control volumes and sub control volume faces
CBoxFVGridGeometry< Scalar, GV, true, Traits >	Base class for the finite volume geometry vector for box schemes This builds up the sub control volumes and sub control volume faces
CBoxGeometryHelper	Create sub control volumes and sub control volume face geometries
CBoxGeometryHelper< GridView, 1, ScvType, ScvfType >	A class to create sub control volume and sub control volume face geometries per element
CBoxGeometryHelper< GridView, 2, ScvType, ScvfType >	A class to create sub control volume and sub control volume face geometries per element
CBoxGeometryHelper< GridView, 3, ScvType, ScvfType >	A class to create sub control volume and sub control volume face geometries per element
CBoxMaterialInterfaces	Class that determines the material with the lowest capillary pressure (under fully water-saturated conditions) around the nodes of a grid
►CBoxMLGeometryTraits	Traits for an efficient corner storage for box method sub control volumes
CCornerStorage
ChasSingleGeometryType
CBoxSubControlVolume	Sub control volume for the box scheme
CBoxSubControlVolumeFace	Class for a sub control volume face in the box method, i.e a part of the boundary of a sub control volume we compute fluxes on. We simply use the base class here
CBrinkmanSpatialParams	Definition of the spatial parameters for the darcy-brinkman problems
CCakeGridManager	Provides a grid manager with a method for creating creating vectors with polar Coordinates and one for creating a Cartesian grid from these polar coordinates
CCCDefaultScvGeometryTraits	Default traits class to be used for the sub-control volumes for the cell-centered finite volume scheme using TPFA
CCCElementBoundaryTypes	Boundary types gathered on an element
CCCElementSolution	The element solution vector
CCCFacetCouplingLocalResidual	Calculates the element-wise residual for cell-centered discretization schemes in models where coupling occurs across the element facets. We only overwrite the function for the computation of a flux across a single sub-control volume face, as we need to additionally check if a boundary face couples to a facet element
CCCFacetCouplingUpwindScheme	The upwind scheme used for the advective fluxes. This is a modified scheme for models involving coupling with a lower-dimensional domain across the element facets
CCCGridVolumeVariables	Base class for the grid volume variables
CCCGridVolumeVariables< Traits, false >	Specialization when the current volume variables are not stored globally
CCCGridVolumeVariables< Traits, true >	Specialization in case of storing the volume variables
CCCLocalAssembler	An assembler for Jacobian and residual contribution per element (cell-centered methods)
CCCLocalAssembler< TypeTag, Assembler, DiffMethod::analytic, false >	Cell-centered scheme local assembler using analytic (hand-coded) differentiation and explicit time discretization
CCCLocalAssembler< TypeTag, Assembler, DiffMethod::analytic, true >	Cell-centered scheme local assembler using analytic (hand-coded) differentiation and implicit time discretization
CCCLocalAssembler< TypeTag, Assembler, DiffMethod::numeric, false >	Cell-centered scheme local assembler using numeric differentiation and explicit time discretization
CCCLocalAssembler< TypeTag, Assembler, DiffMethod::numeric, true >	Cell-centered scheme local assembler using numeric differentiation and implicit time discretization
CCCLocalAssemblerBase	A base class for all local cell-centered assemblers
CCCLocalResidual	Calculates the element-wise residual for the cell-centered discretization schemes
CCCMpfaConnectivityMap	Forward declaration of method specific implementation of the assembly map
CCCMpfaConnectivityMap< GridGeometry, MpfaMethods::oMethod >	The o-method can use the simple (symmetric) assembly map
CCCMpfaDefaultGridFluxVariablesCacheTraits	Data handle physics traits
CCCMpfaDefaultGridVolumeVariablesTraits	Traits for the base class for the grid volume variables
►CCCMpfaDefaultScvfGeometryTraits	Default traits class to be used for the sub-control volume faces for the cell-centered finite volume scheme using MPFA
►CScvfMLGTraits
CCornerStorage
ChasSingleGeometryType
CCCMpfaDualGridIndexSet	Class for the index sets of the dual grid in mpfa schemes
CCCMpfaDualGridNodalIndexSet	Nodal index set for mpfa schemes, constructed around grid vertices
CCCMpfaElementFluxVariablesCache	The flux variables caches for an element
CCCMpfaElementFluxVariablesCache< GFVC, false >	The flux variables caches for an element with caching disabled
CCCMpfaElementFluxVariablesCache< GFVC, true >	The flux variables caches for an element with caching enabled
CCCMpfaElementVolumeVariables	The local (stencil) volume variables class for cell centered mpfa models
CCCMpfaElementVolumeVariables< GVV, false >	The local (stencil) volume variables class for cell centered tpfa models with caching
CCCMpfaElementVolumeVariables< GVV, true >	The local (stencil) volume variables class for cell centered mpfa models with caching
CCCMpfaFVElementGeometry	Stencil-local finite volume geometry (scvs and scvfs) for cell-centered mpfa models This builds up the sub control volumes and sub control volume faces for each element in the local scope we are restricting to, e.g. stencil or element
CCCMpfaFVElementGeometry< GG, false >	Stencil-local finite volume geometry (scvs and scvfs) for cell-centered TPFA models Specialization for grid caching disabled
CCCMpfaFVElementGeometry< GG, true >	Stencil-local finite volume geometry (scvs and scvfs) for cell-centered mpfa models Specialization for grid caching enabled
CCCMpfaFVGridGeometry	The finite volume geometry (scvs and scvfs) for cell-centered mpfa models on a grid view This builds up the sub control volumes and sub control volume faces
CCCMpfaFVGridGeometry< GV, Traits, false >	The finite volume geometry (scvs and scvfs) for cell-centered mpfa models on a grid view This builds up the sub control volumes and sub control volume faces
CCCMpfaFVGridGeometry< GV, Traits, true >	The finite volume geometry (scvs and scvfs) for cell-centered mpfa models on a grid view This builds up the sub control volumes and sub control volume faces
CCCMpfaFVGridGeometryTraits	Traits class to be used for the CCMpfaFVGridGeometry
CCCMpfaGridFluxVariablesCache	Flux variable caches on a gridview
CCCMpfaGridFluxVariablesCache< TheTraits, false >	Flux variable caches on a gridview with grid caching disabled
CCCMpfaGridFluxVariablesCache< TheTraits, true >	Flux variable caches on a gridview with grid caching enabled
CCCMpfaGridInteractionVolumeIndexSets	Class that holds all interaction volume index sets on a grid view
CCCMpfaGridVolumeVariables	Base class for the grid volume variables
CCCMpfaHelper	Helper class to get the required information on an interaction volume
CCCMpfaInteractionVolumeBase	Base class for the interaction volumes of mpfa methods. It defines the interface and actual implementations should derive from this class
CCCMpfaODefaultInteractionVolumeTraits	The default interaction volume traits class for the mpfa-o method. This uses dynamic types types for matrices/vectors in order to work on general grids. For interaction volumes known at compile time use the static interaction volume implementation
CCCMpfaODefaultStaticInteractionVolumeTraits	The default interaction volume traits class for the mpfa-o method with known size of the interaction volumes at compile time. It uses statically sized containers for the iv-local data structures and static matrices and vectors
CCCMpfaOFacetCouplingDefaultInteractionVolumeTraits	The default interaction volume traits class for the mpfa-o method in the context of facet coupling. This uses dynamic types types for matrices/vectors in order to work on general grids
►CCCMpfaOFacetCouplingInteractionVolume	Forward declaration of the facet coupling MPFA-O interaction volume
CInteriorBoundaryData	Define data structure to store which scvfs lie on interior boundaries
CCCMpfaOFacetCouplingInteractionVolumeLocalScv	Class for the interaction volume-local sub-control volume used in the mpfa-o scheme in the context of facet coupling
CCCMpfaOFacetCouplingInteractionVolumeLocalScvf	Class for the interaction volume-local sub-control volume face used in the mpfa-o scheme in the context of facet coupling
►CCCMpfaOInteractionVolume	Forward declaration of the o-method's interaction volume
CDirichletData
CCCMpfaOInteractionVolumeIndexSet	The interaction volume index set class for the mpfa-o scheme
CCCMpfaOInteractionVolumeLocalScv	Class for the interaction volume-local sub-control volume used in the mpfa-o scheme
CCCMpfaOInteractionVolumeLocalScvf	Class for the interaction volume-local sub-control volume face used in the mpfa-o scheme
CCCMpfaOScvGeometryHelper	Helper class providing functionality to compute the geometry of the interaction-volume local sub-control volumes of mpfa-o type
►CCCMpfaOStaticInteractionVolume	Forward declaration of the o-method's static interaction volume
CDirichletData	This does not work on surface grids
CCCMpfaScvGradients	Class providing functionality for the reconstruction of the gradients in the sub-control volumes involved in mpfa schemes
►CCCMpfaSubControlVolumeFace	Class for a sub control volume face in mpfa methods, i.e a part of the boundary of a control volume we compute fluxes on
CFacetInfo
CCCSimpleConnectivityMap	A simple version of the connectivity map for cellcentered schemes. This implementation works for schemes in which for a given cell I only those cells J have to be prepared in whose stencil the cell I appears. This means that for the flux calculations in the cells J (in order to compute the derivatives with respect to cell I), we do not need data on any additional cells J to compute these fluxes. The same holds for scvfs in the cells J, i.e. we need only those scvfs in the cells J in which the cell I is in the stencil
CCCSubControlVolume	Sub control volumes for cell-centered discretization schemes
CCCTpfaDarcysLaw	Darcy's law for cell-centered finite volume schemes with two-point flux approximation
CCCTpfaDarcysLaw< ScalarType, GridGeometry, false >	Specialization of the CCTpfaDarcysLaw grids where dim=dimWorld
CCCTpfaDarcysLaw< ScalarType, GridGeometry, true >	Specialization of the CCTpfaDarcysLaw grids where dim < dimWorld (network/surface grids)
CCCTpfaDefaultGridFVCTraits	Flux variable caches traits
CCCTpfaDefaultGridGeometryTraits	The default traits for the tpfa finite volume grid geometry Defines the scv and scvf types and the mapper types
CCCTpfaDefaultGridVolumeVariablesTraits
►CCCTpfaDefaultScvfGeometryTraits	Default traits class to be used for the sub-control volume faces for the cell-centered finite volume scheme using TPFA
►CScvfMLGTraits
CCornerStorage
CCCTpfaElementFluxVariablesCache	The flux variables caches for an element
CCCTpfaElementFluxVariablesCache< GFVC, false >	The flux variables caches for an element with caching disabled
CCCTpfaElementFluxVariablesCache< GFVC, true >	The flux variables caches for an element with caching enabled
CCCTpfaElementVolumeVariables	The local (stencil) volume variables class for cell centered tpfa models
CCCTpfaElementVolumeVariables< GVV, false >	The local (stencil) volume variables class for cell centered tpfa models with caching
CCCTpfaElementVolumeVariables< GVV, true >	The local (stencil) volume variables class for cell centered tpfa models with caching
CCCTpfaFacetCouplingDarcysLawCache	The cache corresponding to tpfa Darcy's Law with facet coupling
CCCTpfaFacetCouplingDarcysLawCache< AdvectionType, GridGeometry, false >	Specialization of FacetCouplingTpfaDarcysLawCache for non-network grids
CCCTpfaFacetCouplingDarcysLawCache< AdvectionType, GridGeometry, true >	Specialization of FacetCouplingTpfaDarcysLawCache for network grids
CCCTpfaFacetCouplingDarcysLawImpl	Forward declaration of the implementation
CCCTpfaFacetCouplingDarcysLawImpl< ScalarType, GridGeometry, false >	Specialization of CCTpfaFacetCouplingDarcysLawImpl for dim=dimWorld
CCCTpfaFacetCouplingDarcysLawImpl< ScalarType, GridGeometry, true >	Specialization of CCTpfaFacetCouplingDarcysLawImpl for dim<dimWorld
CCCTpfaFacetCouplingFicksLawImpl	Forward declaration of the implementation
CCCTpfaFacetCouplingFicksLawImpl< TypeTag, referenceSystem, false >	Specialization of CCTpfaFacetCouplingFicksLawImpl for dim=dimWorld
CCCTpfaFacetCouplingFicksLawImpl< TypeTag, referenceSystem, true >	Specialization of CCTpfaFacetCouplingFicksLawImpl for dim<dimWorld
CCCTpfaFacetCouplingFouriersLawImpl	Forward declaration of the implementation
CCCTpfaFacetCouplingFouriersLawImpl< TypeTag, false >	Specialization of CCTpfaFacetCouplingFouriersLawImpl for dim=dimWorld
CCCTpfaFacetCouplingFouriersLawImpl< TypeTag, true >	Specialization of CCTpfaFacetCouplingFouriersLawImpl for dim<dimWorld
CCCTpfaForchheimersLaw	Forchheimer's law for cell-centered finite volume schemes with two-point flux approximation
CCCTpfaForchheimersLaw< ScalarType, GridGeometry, ForchheimerVelocity, false >	Specialization of the CCTpfaForchheimersLaw grids where dim=dimWorld
CCCTpfaForchheimersLaw< ScalarType, GridGeometry, ForchheimerVelocity, true >	Specialization of the CCTpfaForchheimersLaw grids where dim<dimWorld
CCCTpfaFVElementGeometry	Stencil-local finite volume geometry (scvs and scvfs) for cell-centered TPFA models This builds up the sub control volumes and sub control volume faces for each element in the local scope we are restricting to, e.g. stencil or element
CCCTpfaFVElementGeometry< GG, false >	Stencil-local finite volume geometry (scvs and scvfs) for cell-centered TPFA models Specialization for grid caching disabled
CCCTpfaFVElementGeometry< GG, true >	Stencil-local finite volume geometry (scvs and scvfs) for cell-centered TPFA models Specialization for grid caching enabled
CCCTpfaFVGridGeometry	The finite volume geometry (scvs and scvfs) for cell-centered TPFA models on a grid view This builds up the sub control volumes and sub control volume faces
CCCTpfaFVGridGeometry< GV, false, Traits >	The finite volume geometry (scvs and scvfs) for cell-centered TPFA models on a grid view This builds up the sub control volumes and sub control volume faces
CCCTpfaFVGridGeometry< GV, true, Traits >	The finite volume geometry (scvs and scvfs) for cell-centered TPFA models on a grid view This builds up the sub control volumes and sub control volume faces
CCCTpfaGridFluxVariablesCache	Flux variable caches on a gridview
CCCTpfaGridFluxVariablesCache< P, FVC, FVCF, false, TheTraits >	Flux variable caches on a gridview with grid caching disabled
CCCTpfaGridFluxVariablesCache< P, FVC, FVCF, true, TheTraits >	Flux variable caches on a gridview with grid caching enabled
CCCTpfaGridVolumeVariables	Base class for the grid volume variables
CCCTpfaSubControlVolumeFace	The sub control volume face
CCellCenterFVGridGeometry	Cell center specific auxiliary FvGridGeometry classes. Required for the Dumux multi-domain framework
CCellCenterGridVariablesView	Cell center specific auxiliary GridVariables classes. Required for the Dumux multi-domain framework
CCheckOverlapSize	Check if the overlap size is valid for a given discretization method
CCheckOverlapSize< DiscretizationMethods::Box >	Specialization for the box method which requires an overlap size of 0
CCheckOverlapSize< DiscretizationMethods::FCStaggered >
CCheckOverlapSize< DiscretizationMethods::FEM >
CCheckPointTimeLoop	A time loop with a check point mechanism
CCircleAveragePointSourceTraits	Point source traits for the circle average coupling mode
CCodimOneGridAdapter	Adapter that allows retrieving information on a d-dimensional grid for entities of a (d-1)-dimensional grid. This lower-dimensional grid is assumed to be facet-conforming to the d-dimensional grid. This class can be used in the context of models where a sub-domain lives on the facets of a bulk grid
CComponentTraits	Component traits, i.e. information extracted from components
CComponentTraits< Components::TabulatedComponent< RawComponent, useVaporPressure > >	Component traits for tabulated component
CCompositionalFlash	Flash calculation routines for compositional sequential models
CCompositionalFluidState	Represents all relevant thermodynamic quantities of a multi-phase, multi-component fluid system assuming thermodynamic equilibrium
CCompositionalLocalResidual	Element-wise calculation of the local residual for problems using compositional fully implicit model
CCompositionalSolidState	Represents all relevant thermodynamic quantities of a compositional solid system
CCompositionFromFugacities	Calculates the chemical equilibrium from the component fugacities $f^{\kappa }$ in the phase $\alpha$
CComputeFromReferencePhase	Computes all quantities of a generic fluid state if a reference phase has been specified
CConformingGridIntersectionMapper	Defines a standard intersection mapper for mapping of global DOFs assigned to faces. It only works for conforming grids, without hanging nodes
CConformingIntersectionWriter	Conforming intersection writer
CConsistentlyOrientedGrid	Helper type to determine whether a grid is guaranteed to be oriented consistently. This means that the intersection indices always correspond to the ones of a reference element or, in other words, the elements are never rotated
CConsistentlyOrientedGrid< Dune::SubGrid< dim, Dune::YaspGrid< dim, Coords >, mapIndexStorage > >
CConsistentlyOrientedGrid< Dune::YaspGrid< dim, Coords > >
CConstants	A central place for various physical constants occurring in some equations
CConvergenceWriterInterface	A convergence writer interface Provide an interface that show the minimal requirements a convergence write passed to a newton method has to fulfill
CCouplingManager	The interface of the coupling manager for multi domain problems
CCouplingManagerSupportsMultithreadedAssembly	Type trait that is specialized for coupling manager supporting multithreaded assembly
CCouplingManagerSupportsMultithreadedAssembly< CVFEFreeFlowCouplingManager< T > >	Whether we support multithreaded assembly
CCouplingManagerSupportsMultithreadedAssembly< Embedded1d3dCouplingManager< MDTraits, Embedded1d3dCouplingMode::Average > >	We support multithreaded assembly
CCouplingManagerSupportsMultithreadedAssembly< Embedded1d3dCouplingManager< MDTraits, Embedded1d3dCouplingMode::Kernel > >	We support multithreaded assembly
CCouplingManagerSupportsMultithreadedAssembly< Embedded1d3dCouplingManager< MDTraits, Embedded1d3dCouplingMode::Line > >	We support multithreaded assembly
CCouplingManagerSupportsMultithreadedAssembly< Embedded1d3dCouplingManager< MDTraits, Embedded1d3dCouplingMode::Projection > >	We support multithreaded assembly
CCouplingManagerSupportsMultithreadedAssembly< Embedded1d3dCouplingManager< MDTraits, Embedded1d3dCouplingMode::Surface > >	We support multithreaded assembly
CCouplingManagerSupportsMultithreadedAssembly< EmbeddedCouplingManager2d3d< MDTraits > >	We support multithreaded assembly
CCouplingManagerSupportsMultithreadedAssembly< FCStaggeredFreeFlowCouplingManager< T > >
CCubicSpline	A simple implementation of a natural cubic spline
CCubicSplineHermiteBasis	The cubic spline hermite basis
CCVFEDarcysLaw	Darcy's law for control-volume finite element schemes
CCVFEDefaultGridFVCTraits	Flux variable caches traits
CCVFEDefaultGridVolumeVariablesTraits
CCVFEElementBoundaryTypes	This class stores an array of BoundaryTypes objects
CCVFEElementFluxVariablesCache	The flux variables caches for an element
CCVFEElementFluxVariablesCache< GFVC, false >	The flux variables caches for an element with caching disabled
CCVFEElementFluxVariablesCache< GFVC, true >	The flux variables caches for an element with caching enabled
CCVFEElementSolution	The element solution vector
CCVFEElementVolumeVariables	The local (stencil) volume variables class for control-volume finite element
CCVFEElementVolumeVariables< GVV, false >	The local (stencil) volume variables class for control-volume finite element without caching
CCVFEElementVolumeVariables< GVV, true >	The local (stencil) volume variables class for control-volume finite element with caching
CCVFEFluxVariablesCache	Flux variables cache class for control-volume finite element schemes. For control-volume finite element schemes, this class does not contain any physics-/process-dependent data. It solely stores disretization-/grid-related data
CCVFEFreeFlowCouplingManager	The interface of the coupling manager for free flow systems
CCVFEGridFluxVariablesCache	Flux variable caches on a gridview
CCVFEGridFluxVariablesCache< P, FVC, false, Traits >	Flux variable caches on a gridview with grid caching disabled
CCVFEGridFluxVariablesCache< P, FVC, true, Traits >	Flux variable caches on a gridview with grid caching enabled
CCVFEGridVolumeVariables	Base class for the grid volume variables
CCVFEGridVolumeVariables< Traits, false >
CCVFEGridVolumeVariables< Traits, true >
CCVFELocalAssembler	An assembler for Jacobian and residual contribution per element (CVFE methods)
CCVFELocalAssembler< TypeTag, Assembler, DiffMethod::analytic, false, Implementation >	Control volume finite element local assembler using analytic differentiation and explicit time discretization
CCVFELocalAssembler< TypeTag, Assembler, DiffMethod::analytic, true, Implementation >	Control volume finite element local assembler using analytic differentiation and implicit time discretization
CCVFELocalAssembler< TypeTag, Assembler, DiffMethod::numeric, false, Implementation >	Control volume finite element local assembler using numeric differentiation and explicit time discretization
CCVFELocalAssembler< TypeTag, Assembler, DiffMethod::numeric, true, Implementation >	Control volume finite element local assembler using numeric differentiation and implicit time discretization
CCVFELocalAssemblerBase	A base class for all local CVFE assemblers
CCVFELocalResidual	The element-wise residual for control-volume finite element schemes
CDarcyDarcyBoundaryCouplingManager	Coupling manager for equal-dimension boundary coupling of darcy models
CDarcyDarcyBoundaryCouplingMapper	Default mapper for conforming equal dimension boundary coupling between two domains (box or cc)
CDarcysLawImplementation	Forward declaration of the method-specific implementation
CDarcysLawImplementation< TypeTag, DiscretizationMethods::CCMpfa >	Darcy's law for cell-centered finite volume schemes with multi-point flux approximation
CDarcysLawImplementation< TypeTag, DiscretizationMethods::CCTpfa >	Darcy's law for cell-centered finite volume schemes with two-point flux approximation
CDarcysLawImplementation< TypeTag, DiscretizationMethods::CVFE< DM > >	Specialization of Darcy's Law for control-volume finite element schemes
CDefaultDynamicHyperelasticSpatialParams
CDefaultFEGridGeometryTraits	Default Traits class for the fem grid geometry
CDefaultHyperelasticSpatialParams
CDefaultIOFields	Adds output fields to a given output module
CDefaultMapperTraits
CDefaultPartialReassembler
CDefaultPointSourceTraits	Default point source traits
CDiamondGeometryHelper	Helper class to construct SCVs and SCVFs for the diamond scheme
CDiffusionCacheChooser
CDiffusionCacheChooser< TypeTag, true >
CDiffusionDataHandle	Data handle for quantities related to diffusion
CDiffusionDataHandle< MatVecTraits, PhysicsTraits, false >
CDiffusivityConstantTortuosity	Relation for the effective diffusion coefficient with constant tortuosity
CDiffusivityMillingtonQuirk	Relation for the effective diffusion coefficient after Millington and Quirk
CDimensionlessNumbers	Collection of functions which calculate dimensionless numbers. Each number has it's own function. All the parameters for the calculation have to be handed over. Rendering this collection generic in the sense that it can be used by any model
CDispersionFluxImplementation
CDispersionFluxImplementation< TypeTag, DiscretizationMethods::Box, referenceSystem >	Specialization of a dispersion flux for the box method
CDispersionFluxImplementation< TypeTag, DiscretizationMethods::CCTpfa, referenceSystem >	Specialization of a Dispersion flux for the cctpfa method
CDofBackend	Class providing operations with primary variable vectors
CDofBackend< Dune::MultiTypeBlockVector< Blocks... >, false >	Specialization providing operations for multitype block vectors
CDofBackend< Scalar, true >	Specialization providing operations for scalar/number types
CDofBackend< Vector, false >	Specialization providing operations for block vectors
CDoubleExponentialIntegrator	Numerical integration in one dimension using the double exponential method of M. Mori
CDumuxMessage	DuMux start and end message
CEffectiveStressLaw	This computes the stress tensor and surface forces resulting from poro-mechanical deformation
CEffectiveStressLaw< StressType, GridGeometry, typename GridGeometry::DiscretizationMethod >	Effective stress law for box scheme
CElasticIndices	The indices for the linear elasticity model
CElasticLocalResidual	Element-wise calculation of the local residual for problems using the elastic model considering linear elasticity
CElasticModelTraits	Specifies a number properties of the elastic model
CElasticVolumeVariables	Contains the quantities which are constant within a finite volume in the elastic model
CElasticVolumeVariablesTraits	Traits class for the volume variables of the elastic model
CElectroChemistry	This class calculates source terms and current densities for fuel cells with the electrochemical models suggested by Ochs (2008) [64] or Acosta et al. (2006) [2]
CElectroChemistryNI	Class calculating source terms and current densities for fuel cells with the electrochemical models suggested by Ochs (2008) [64] or Acosta (2006) [2] for the non-isothermal case
CEmbedded1d3dCouplingManager	Manages the coupling between bulk elements and lower dimensional elements Point sources on each integration point are computed by an AABB tree
CEmbedded1d3dCouplingManager< MDTraits, Embedded1d3dCouplingMode::Average >	Manages the coupling between bulk elements and lower dimensional elements Point sources on each integration point are computed by an AABB tree
CEmbedded1d3dCouplingManager< MDTraits, Embedded1d3dCouplingMode::Kernel >	Manages the coupling between bulk elements and lower dimensional elements Point sources on each integration point are computed by an AABB tree
CEmbedded1d3dCouplingManager< MDTraits, Embedded1d3dCouplingMode::Line >	Manages the coupling between bulk elements and lower dimensional elements Point sources on each integration point are computed by an AABB tree
CEmbedded1d3dCouplingManager< MDTraits, Embedded1d3dCouplingMode::Projection >	Manages the coupling between bulk elements and lower dimensional elements
CEmbedded1d3dCouplingManager< MDTraits, Embedded1d3dCouplingMode::Surface >	Manages the coupling between bulk elements and lower dimensional elements Point sources on each integration point are computed by an AABB tree
CEmbeddedCouplingManager2d3d	Coupling manager for embedded fractures
CEmbeddedCouplingManagerBase	Manages the coupling between bulk elements and lower dimensional elements Point sources on each integration point are computed by an AABB tree
CEmptyDataHandle	Empty data handle class
CEmptyElementSolution
CEnergyCacheChooser
CEnergyCacheChooser< TypeTag, true >
CEnergyIndices	Indices for the non-isothermal two-phase two-component model
CEnergyIOFields	Adds I/O fields specific to non-isothermal models
CEnergyIOFields< void >	Adds I/O fields specific to non-isothermal models
CEnergyLocalResidualImplementation
CEnergyLocalResidualImplementation< TypeTag, false >	Element-wise calculation of the energy residual for isothermal problems
CEnergyLocalResidualImplementation< TypeTag, true >	Element-wise calculation of the energy residual for non-isothermal problems
CEnergyLocalResidualNonEquilibrium	This file contains the parts of the local residual to calculate the heat conservation in the thermal non-equilibrium model
CEnergyLocalResidualNonEquilibrium< TypeTag, 1 >
CEnergyLocalResidualNonEquilibrium< TypeTag, 2 >	TODO docme
CEnergyVolumeVariablesImplementation
CEnergyVolumeVariablesImplementation< IsothermalTraits, Impl, false >	The isothermal base class
CEnergyVolumeVariablesImplementation< Traits, Impl, true >	The non-isothermal implicit volume variables base class
CEnrichedVertexDofMapper	A vertex mapper that allows for enrichment of nodes. Indication on where to enrich the nodes is done on the basis of a grid of codimension one living on the facets of the bulk grid
CEnrichmentIndicator	An indicator class used to mark vertices for enrichment. This implementation marks all vertices of a given grid of codimension one for enrichment, except those that are connected to inmersed boundaries
CEntityMap	A map from indices to entities using grid entity seeds
CExplicitDiagonalSolver	Solver for simple block-diagonal matrices (e.g. from explicit time stepping schemes)
CExtendedRichardsIndices	Index names for the extended Richards model
CExtendedRichardsIOFields	Adds I/O fields specific to the extended Richards model
CExtendedRichardsLocalResidual	Element-wise calculation of the Jacobian matrix for problems using the extended Richards fully implicit models
CExtendedRichardsModelTraits	Specifies a number properties of the extended Richards model
CExtendedRichardsPrimaryVariableSwitch	The primary variable switch controlling the phase presence state variable
CExtendedRichardsVolumeVariables	Volume averaged quantities required by the extended Richards model
CExtendedRichardsVolumeVariablesTraits	Traits class for the Richards model
CExtrusion	Traits extracting the public Extrusion type from T Defaults to NoExtrusion if no such type is found
CFaceCenteredDefaultScvfGeometryTraits	Default traits class to be used for the sub-control volume face for the face-centered staggered finite volume scheme
CFaceCenteredDefaultScvGeometryTraits	Default traits class to be used for the sub-control volumes for the face-centered staggered scheme
CFaceCenteredDiamondDefaultGridGeometryTraits	The default traits for the face-centered diamond finite volume grid geometry Defines the scv and scvf types and the mapper types
CFaceCenteredDiamondFVElementGeometry	Element-wise grid geometry (local view)
CFaceCenteredDiamondFVElementGeometry< GG, true >	Element-wise grid geometry (local view)
CFaceCenteredDiamondFVGridGeometry	Grid geometry for the diamond discretization
CFaceCenteredDiamondScvfGeometryTraits	Default traits class to be used for the sub-control volumes for the cell-centered finite volume scheme using TPFA
CFaceCenteredDiamondScvGeometryTraits	Default traits class to be used for the sub-control volumes
CFaceCenteredDiamondSubControlVolume	Face centered diamond subcontrolvolume face
CFaceCenteredDiamondSubControlVolumeFace	The SCVF implementation for diamond
CFaceCenteredLocalAssembler	An assembler for Jacobian and residual contribution per element (Face-centered methods)
CFaceCenteredLocalAssembler< TypeTag, Assembler, DiffMethod::analytic, false, Implementation >	TODO docme
CFaceCenteredLocalAssembler< TypeTag, Assembler, DiffMethod::analytic, true, Implementation >	TODO docme
CFaceCenteredLocalAssembler< TypeTag, Assembler, DiffMethod::numeric, false, Implementation >	TODO docme
CFaceCenteredLocalAssembler< TypeTag, Assembler, DiffMethod::numeric, true, Implementation >	Face-centered scheme local assembler using numeric differentiation and implicit time discretization
CFaceCenteredLocalAssemblerBase	A base class for all local cell-centered assemblers
CFaceCenteredLocalResidual	The element-wise residual for the box scheme
CFaceCenteredStaggeredConnectivityMap	Stores the dof indices corresponding to the neighboring scvs that contribute to the derivative calculation
CFaceCenteredStaggeredDefaultGridFVCTraits	Flux variable caches traits
►CFaceCenteredStaggeredDefaultGridGeometryTraits	The default traits for the face-center staggered finite volume grid geometry Defines the scv and scvf types and the mapper types
CStaticInfo
CFaceCenteredStaggeredDefaultGridVolumeVariablesTraits
CFaceCenteredStaggeredElementBoundaryTypes	This class stores an array of BoundaryTypes objects
CFaceCenteredStaggeredElementFluxVariablesCache	The flux variables caches for an element
CFaceCenteredStaggeredElementFluxVariablesCache< GFVC, false >	The flux variables caches for an element with caching disabled
CFaceCenteredStaggeredElementFluxVariablesCache< GFVC, true >	The flux variables caches for an element with caching enabled
CFaceCenteredStaggeredElementSolution	The global face variables class for staggered models
CFaceCenteredStaggeredElementVolumeVariables	Base class for the face variables vector
CFaceCenteredStaggeredElementVolumeVariables< GVV, false >	Class for the face variables vector. Specialization for the case of not storing the face variables globally
CFaceCenteredStaggeredElementVolumeVariables< GVV, true >	Class for the face variables vector. Specialization for the case of storing the face variables globally
CFaceCenteredStaggeredFVElementGeometry
CFaceCenteredStaggeredFVElementGeometry< GG, false >	Stencil-local finite volume geometry (scvs and scvfs) for face-centered staggered models Specialization for grid caching disabled
CFaceCenteredStaggeredFVElementGeometry< GG, true >	Stencil-local finite volume geometry (scvs and scvfs) for face-centered staggered models Specialization for grid caching enabled
CFaceCenteredStaggeredFVGridGeometry	Base class for the finite volume geometry vector for face-centered staggered models This builds up the sub control volumes and sub control volume faces for each element
CFaceCenteredStaggeredFVGridGeometry< GV, false, Traits >	Base class for the finite volume geometry vector for face-centered staggered models This builds up the sub control volumes and sub control volume faces for each element. Specialization in case the FVElementGeometries are stored
CFaceCenteredStaggeredFVGridGeometry< GV, true, Traits >	Base class for the finite volume geometry vector for staggered models This builds up the sub control volumes and sub control volume faces for each element. Specialization in case the FVElementGeometries are stored
CFaceCenteredStaggeredGeometryHelper	Face centered staggered geometry helper
CFaceCenteredStaggeredGridFluxVariablesCache	Flux variable caches on a gridview
CFaceCenteredStaggeredGridFluxVariablesCache< P, FVC, FVCF, false, Traits >	Flux variable caches on a gridview with grid caching disabled
CFaceCenteredStaggeredGridFluxVariablesCache< P, FVC, FVCF, true, Traits >	Flux variable caches on a gridview with grid caching enabled
CFaceCenteredStaggeredGridVolumeVariables	Base class for the grid volume variables
CFaceCenteredStaggeredGridVolumeVariables< Traits, false >	Specialization when the current volume variables are not stored globally
CFaceCenteredStaggeredGridVolumeVariables< Traits, true >	Specialization in case of storing the volume variables
CFaceCenteredStaggeredSubControlVolume	Face centered staggered sub control volume
CFaceCenteredStaggeredSubControlVolumeFace	Face centered staggered sub control volume face
CFaceFVGridGeometry	Face specific auxiliary FvGridGeometry classes. Required for the Dumux multi-domain framework
CFaceGridVariablesView	Face specific auxiliary GridVariables classes. Required for the Dumux multi-domain framework
CFacetCouplingEmbeddings	Contains the embeddings between grids with codimension one among the grid hierarchy. All these embedments are given in insertion indices as they are read directly from the grid. Therefore, this class furthermore allows access to the insertion indices of entities. Additionally, it gives access to the grid views of the different grids on the hierarchy
CFacetCouplingGmshReader	Reads gmsh files where (n-1)-dimensional grids are defined on the faces or edges of n-dimensional grids
CFacetCouplingGridDataWrapper	Grid data object to store element and boundary segment markers for all grids of the hierarchy
CFacetCouplingGridManager	Creates the grids in the context of hybrid-dimensional coupled models, where the (n-1)-dimensional domains live on the element facets of the n-dimensional domains
CFacetCouplingManager	Implementation for the coupling manager between two domains of dimension d and (d-1) for models considering coupling across the bulk domain element facets. The implementations are specificto the discretization method used in the bulk domain, which is extracted automatically from the grid geometry corresponding to the provided bulk domain id. Implementations for the different methods have to be provided and included at the end of this file
CFacetCouplingManager< MDTraits, CouplingMapper, bulkDomainId, lowDimDomainId, DiscretizationMethods::Box >	Manages the coupling between bulk elements and lower dimensional elements where the coupling occurs across the facets of the bulk grid. This implementation is to be used in conjunction with models using the box scheme in the bulk domain
CFacetCouplingManager< MDTraits, CouplingMapper, bulkDomainId, lowDimDomainId, DiscretizationMethods::CCMpfa >	Manages the coupling between bulk elements and lower dimensional elements where the coupling occurs across the facets of the bulk grid. This implementation is to be used in conjunction with models using the cell-centered mpfa scheme
CFacetCouplingManager< MDTraits, CouplingMapper, bulkDomainId, lowDimDomainId, DiscretizationMethods::CCTpfa >	Manages the coupling between bulk elements and lower dimensional elements where the coupling occurs across the facets of the bulk grid. This implementation is to be used in conjunction with models using the cell-centered tpfa scheme
CFacetCouplingMapper	Implementation for the coupling mapper that sets up and stores the coupling maps between two domains of dimension d and (d-1). The implementations are specific to the discretization method used in the bulk domain, which is extracted automatically from the bulk grid geometry. Implementations for the different methods have to be provided and included at the end of this file
CFacetCouplingMapper< BulkFVG, LowDimFVG, bulkId, lowDimId, DiscretizationMethods::Box >	Base class for the coupling mapper that sets up and stores the coupling maps between two domains of dimension d and (d-1). This specialization is for the bulk domain using the box scheme
CFacetCouplingMapper< BulkFVG, LowDimFVG, bulkId, lowDimId, DiscretizationMethods::CCMpfa >	Base class for the coupling mapper that sets up and stores the coupling maps between two domains of dimension d and (d-1). This specialization is for the bulk domain using the cell-centered scheme with multi-point flux approximation
CFacetCouplingMapper< BulkFVG, LowDimFVG, bulkId, lowDimId, DiscretizationMethods::CCTpfa >	Base class for the coupling mapper that sets up and stores the coupling maps between two domains of dimension d and (d-1). This specialization is for the bulk domain using the cell-centered scheme with two-point flux approximation
CFacetCouplingMapperBase	Base class for the coupling mapper that sets up and stores the coupling maps between two domains of dimension d and (d-1)
CFacetCouplingThreeDomainManager	Class that handles the coupling between three sub-domains in models where the coupling between the two occurs across the facets of the d- and (d-1)- dimensional domains
CFacetCouplingThreeDomainMapper	Specialization of the mapper class for the case of three domains with the grid dimensions d, (d-1) & (d-2)
CFacetGridManager	Grid manager for grids living on the facets of a host grid
►CFCDiamondMLGeometryTraits	Traits for an efficient corner storage for fc diamond method
CCornerStorage
CFCStaggeredFreeFlowCouplingManager	The interface of the coupling manager for free flow systems
CFEElementGeometry	Grid geometry local view, which is a wrapper around a finite element basis local view
CFEGridGeometry	The grid geometry class for models using finite element schemes. This is basically a wrapper around a function space basis
CFFMassPMCouplingManagerStaggeredCCTpfa	Coupling manager for Stokes and Darcy domains with equal dimension. Specialization for staggered-cctpfa coupling
CFFMomentumPMCouplingManagerStaggeredCCTpfa	Coupling manager for Stokes and Darcy domains with equal dimension specialization for staggered-cctpfa coupling
CFFMomentumPMCouplingMapperStaggeredCCTpfa	Default mapper for conforming equal dimension boundary coupling between two domains (box or cc)
CFFPMCouplingConditionsStaggeredCCTpfaImpl
CFFPMCouplingConditionsStaggeredCCTpfaImpl< MDTraits, CouplingManager, enableEnergyBalance, false >	Coupling data specialization for non-compositional models
CFFPMCouplingConditionsStaggeredCCTpfaImplBase	A base class which provides some common methods used for Stokes-Darcy coupling
CFickianDiffusionCoefficients	Container storing the diffusion coefficients required by Fick's law. Uses the minimal possible container size and provides unified access
CFicksLawImplementation	Forward declaration of the method-specific implementation
CFicksLawImplementation< TypeTag, DiscretizationMethods::Box, referenceSystem >	Specialization of Fick's Law for the box method
CFicksLawImplementation< TypeTag, DiscretizationMethods::CCMpfa, referenceSystem >	Fick's law for cell-centered finite volume schemes with multi-point flux approximation
CFicksLawImplementation< TypeTag, DiscretizationMethods::CCTpfa, referenceSystem >	Fick's law for cell-centered finite volume schemes with two-point flux approximation
CFicksLawImplementation< TypeTag, DiscretizationMethods::Staggered, referenceSystem >	Specialization of Fick's Law for the staggered free flow method
CFixedSizeGeometriesEntitySet	An interface for a fixed-size set of geometric entities
CFluidMatrixInteraction	Wrapper type to combine an arbitrary number of different laws for fluid-matrix interaction (e.g., pc-Sw-curves)
CFluidSolidInterfacialAreaShiWang	Description of a interfacial area between solid and fluid phase
CFluidStateAdapter	Adapter class for fluid states with different indices
CFluxOverAxisAlignedSurface	Class used to calculate fluxes over axis-aligned surfaces
CFluxOverSurface	Class used to calculate fluxes over surfaces. This only works for the staggered grid discretization
CFluxStencil	The flux stencil specialized for different discretization schemes
CFluxStencil< FVElementGeometry, DiscretizationMethods::CCMpfa >
CFluxStencil< FVElementGeometry, DiscretizationMethods::CCTpfa >
CFluxTraits	Traits of a flux variables type
CFluxVariablesBase	Base class for the flux variables living on a sub control volume face
CForchheimersLawImplementation	Forward declare
CForchheimersLawImplementation< TypeTag, ForchheimerVelocity, DiscretizationMethods::Box >	Forchheimer's law for box scheme
CForchheimersLawImplementation< TypeTag, ForchheimerVelocity, DiscretizationMethods::CCTpfa >	Forchheimer's law for cell-centered finite volume schemes with two-point flux approximation
CForchheimerVelocity	Forchheimer's law For a detailed description see dumux/flow/forchheimerslaw.hh
CFouriersLawImplementation	Forward declaration of the method-specific implementation
CFouriersLawImplementation< TypeTag, DiscretizationMethods::Box >	Specialization of Fourier's Law for the box method
CFouriersLawImplementation< TypeTag, DiscretizationMethods::CCMpfa >	Fourier's law for cell-centered finite volume schemes with multi-point flux approximation
CFouriersLawImplementation< TypeTag, DiscretizationMethods::CCTpfa >	Fourier's law for cell-centered finite volume schemes with two-point flux approximation
CFouriersLawImplementation< TypeTag, DiscretizationMethods::Staggered >	Specialization of Fourier's Law for the staggered free flow method
CFouriersLawNonEquilibriumImplementation
CFouriersLawNonEquilibriumImplementation< TypeTag, DiscretizationMethods::Box >	Specialization of Fourier's Law for the box method for thermal nonequilibrium models
CFouriersLawNonEquilibriumImplementation< TypeTag, DiscretizationMethods::CCTpfa >	Fourier's law for cell-centered finite volume schemes with two-point flux approximation
CFreeFlowDefaultSpatialParams	Definition of the spatial parameters for the freeflow problems
CFreeFlowEnergyLocalResidualImplementation
CFreeFlowEnergyLocalResidualImplementation< GridGeometry, FluxVariables, DiscretizationMethod, false, isCompositional >	Specialization for isothermal models, does nothing
CFreeFlowEnergyLocalResidualImplementation< GridGeometry, FluxVariables, DiscretizationMethods::Staggered, true, false >	Specialization for staggered one-phase, non-isothermal models
CFreeFlowEnergyLocalResidualImplementation< GridGeometry, FluxVariables, DiscretizationMethods::Staggered, true, true >	Specialization for staggered compositional, non-isothermal models
CFreeFlowMassPoreNetworkCouplingManager	Coupling manager for free-flow mass and pore-network models
CFreeFlowMomentumPoreNetworkCouplingManager	Coupling manager for free-flow momentum and pore-network models
CFreeflowNCFluxVariablesImpl	The flux variables class for the multi-component free-flow model using the staggered grid discretization
CFreeflowNCFluxVariablesImpl< TypeTag, DiscretizationMethods::Staggered >
CFreeflowNCIOFields	Adds I/O fields specific to the FreeflowNC model
CFreeflowNCResidualImpl	Element-wise calculation of the multi-component free-flow residual for models using the staggered discretization
CFreeflowNCResidualImpl< TypeTag, DiscretizationMethods::Staggered >
CFreeflowNCVolumeVariables	Volume variables for the single-phase, multi-component free-flow model
CFreeflowNIModelTraits	Specifies a number properties of non-isothermal free-flow flow models based on the specifics of a given isothermal model
CFreeflowNonIsothermalIndices	Indices for the non-isothermal Navier-Stokes model
CFreeflowNonIsothermalIOFields	Adds I/O fields specific to non-isothermal free-flow models
CFreeFlowPoreNetworkCouplingConditionsImplementation
CFreeFlowPoreNetworkCouplingConditionsImplementation< MDTraits, CouplingManager, enableEnergyBalance, false >	Coupling conditions specialization for non-compositional models
CFreeFlowPoreNetworkCouplingConditionsImplementation< MDTraits, CouplingManager, enableEnergyBalance, true >	Coupling conditions specialization for compositional models
CFreeFlowPoreNetworkCouplingConditionsImplementationBase	A base class which provides some common methods used for free-flow/pore-network coupling
CFreeFlowPoreNetworkCouplingManager	Coupling manager for coupling freeflow and pore-network models
CFreeFlowPorousMediumCouplingManagerBase	Base coupling manager for coupling freeflow and porous medium flow models
CFreeFlowPorousMediumCouplingManagerStaggeredCCTpfa	Coupling manager for coupling freeflow and porous medium flow models specialization for staggered-cctpfa coupling
CFreeFlowPorousMediumCouplingOptions	This structs holds a set of options which allow to modify the Stokes-Darcy coupling mechanism during runtime
CFreeFlowScalarFluxVariablesCacheFillerImplementation
CFreeFlowScalarFluxVariablesCacheFillerImplementation< Problem, ModelTraits, diffusionIsSolDependent, heatConductionIsSolDependent, DiscretizationMethods::CCTpfa >	Specialization of the flux variables cache filler for the cell centered tpfa method
CFreeFlowSpatialParams	Definition of the spatial parameters for the freeflow problems
CFreeFlowStaggeredDefaultScvfGeometryTraits	Default traits class to be used for the sub-control volume faces for the free-flow staggered finite volume scheme
CFreeFlowStaggeredGeometryHelper	Helper class constructing the dual grid finite volume geometries for the free flow staggered discretization method
►CFreeflowStaggeredSCV
CTraits
►CFreeflowStaggeredSCVF
CTraits
CFreeFlowStaggeredSubControlVolumeFace	Class for a sub control volume face in the staggered method, i.e a part of the boundary of a sub control volume we compute fluxes on. This is a specialization for free flow models
CFreeFlowVolumeVariablesImplementation
CFreeFlowVolumeVariablesImplementation< Traits, Impl, false >	Volume variables for isothermal free-flow models
CFreeFlowVolumeVariablesImplementation< Traits, Impl, true >	Volume variables for the non-isothermal free-flow models
CFrictionLaw	Implementation of the abstract base class for friction laws
CFrictionLawManning	Implementation of the friction law after Manning
CFrictionLawNikuradse	Implementation of the friction law after Nikuradse
CFrictionLawNoFriction	A pseudo friction law with no bottom friction
CFrictionLawViscousNoSlip	Implementation of a viscous no-slip bottom friction law
CFullDispersionTensor	Full dispersion tensor
CFunctionFromStringExpression	Evaluating string math expressions containing named variables
CFVAssembler	A linear system assembler (residual and Jacobian) for finite volume schemes (box, tpfa, mpfa, ...)
CFVElasticSpatialParams	The base class for spatial parameters of linear elastic geomechanical problems
CFVFacetGridMapper	Maps between entities of finite-volume discretizations and a grid defined on the facets of the discretization
CFVGridVariables	The grid variable class for finite volume schemes storing variables on scv and scvf (volume and flux variables)
CFVLocalAssemblerBase	A base class for all local assemblers
CFVLocalResidual	The element-wise residual for finite volume schemes
CFVPoroElasticSpatialParams	The base class for spatial parameters of poro-elastic geomechanical problems
CFVPorousMediumFlowSpatialParams	The base class for spatial parameters of porous-medium-flow problems
CFVPorousMediumFlowSpatialParamsMP	The base class for spatial parameters of multi-phase problems
CFVPorousMediumFlowSpatialParamsNonEquilibrium	Definition of the spatial parameters for non-equilibrium
CFVPorousMediumFlowSpatialParamsOneP	The base class for spatial parameters of single-phase problems
CFVPorousMediumFlowSpatialParamsOnePConstant	A spatial params implementation for 1p problem with constant properties
CFVPorousMediumSpatialParams	The base class for spatial parameters of porous-medium problems
►CFVProblem	Base class for all finite-volume problems
CTraits	Export traits of this problem
CFVProblemWithSpatialParams	Base class for all finite-volume problems using spatial parameters
CFVSpatialParams	The base class for spatial parameters used with finite-volume schemes
CGeomechanicsFVProblem	Base class for all geomechanical problems
CGeomechanicsVelocityOutput	Velocity output for geomechanical models. This class could be used to compute the temporal derivative of the displacement. Currently this is not implemented and we simply define this here in order to be able to reuse the VtkOutputModule which expects a VelocityOutput class
CGeometriesEntitySet	An interface for a set of geometric entities
CGeometryIntersection	A class for geometry collision detection and intersection calculation The class can be specialized for combinations of dimworld, dim1, dim2, where dimworld is the world dimension embedding a grid of dim1 and a grid of dim2
CGeometryIntersection< Geometry1, Geometry2, Policy, 2, 1, 1 >	A class for segment–segment intersection in 2d space
CGeometryIntersection< Geometry1, Geometry2, Policy, 2, 1, 2 >	A class for segment–polygon intersection in 2d space
CGeometryIntersection< Geometry1, Geometry2, Policy, 2, 2, 1 >	A class for polygon–segment intersection in 2d space
CGeometryIntersection< Geometry1, Geometry2, Policy, 2, 2, 2 >	A class for polygon–polygon intersection in 2d space
CGeometryIntersection< Geometry1, Geometry2, Policy, 3, 1, 1 >	A class for segment–segment intersection in 3d space
CGeometryIntersection< Geometry1, Geometry2, Policy, 3, 1, 2 >	A class for segment–polygon intersection in 3d space
CGeometryIntersection< Geometry1, Geometry2, Policy, 3, 1, 3 >	A class for segment–polyhedron intersection in 3d space
CGeometryIntersection< Geometry1, Geometry2, Policy, 3, 2, 1 >	A class for polygon–segment intersection in 3d space
CGeometryIntersection< Geometry1, Geometry2, Policy, 3, 2, 2 >	A class for polygon–polygon intersections in 3d space
CGeometryIntersection< Geometry1, Geometry2, Policy, 3, 2, 3 >	A class for polygon–polyhedron intersection in 3d space
CGeometryIntersection< Geometry1, Geometry2, Policy, 3, 3, 1 >	A class for polyhedron–segment intersection in 3d space
CGeometryIntersection< Geometry1, Geometry2, Policy, 3, 3, 2 >	A class for polyhedron–polygon intersection in 3d space
CGeometryIntersection< Geometry1, Geometry2, Policy, 3, 3, 3 >	A class for polyhedron–polyhedron intersection in 3d space
CGmshGridDataHandle	A data handle for commucating grid data for gmsh grids
CGnuplotInterface	Interface for passing data sets to a file and plotting them, if gnuplot is installed
CGridAdaptInitializationIndicator	Class defining an initialization indicator for grid adaption. Refines at sources and boundaries. Use before computing on the grid
CGridData	Class for grid data attached to dgf or gmsh grid files
CGridDataTransfer	Interface to be used by classes transferring grid data on adaptive grids
CGridGeometryView	Base class for cell center of face specific auxiliary FvGridGeometry classes. Provides a common interface and a pointer to the actual gridGeometry
CGridManager	The grid manager (this is the class used by the user) for all supported grid managers that constructs a grid from information in the input file and handles the data
CGridManager< Dune::OneDGrid >	Provides a grid manager for OneDGrids from information in the input file
CGridManager< Dune::YaspGrid< dim, Coordinates > >	Provides a grid manager for YaspGrids from information in the input file
CGridManager< Dune::YaspGrid< dim, Dune::TensorProductCoordinates< ctype, dim > > >	Provides a grid manager for YaspGrids with different zones and grading
CGridManagerBase	The grid manager base interface (public) and methods common to most grid manager specializations (protected)
CGridSupportsConcaveCorners	Type trait to determine if a grid supports concave corners (e.g. by cutting out a hole from the domain interior)
CGridSupportsConcaveCorners< Dune::YaspGrid< dim, Coords > >
CGridViewGeometricEntitySet	An interface for a set of geometric entities based on a GridView
CGstatRandomField	Creating random fields using gstat
CHasStationaryVelocityField	Trait of an advection type stating whether it implements a stationary velocity field
CHasStationaryVelocityField< StationaryVelocityField< Scalar > >	Set stationary velocity field to true in the FluxTraits
ChasVertexColor	Helper struct to determine whether the an engine class has vertex colors
CHeatConductionDataHandle	Data handle for quantities related to heat conduction
CHeatConductionDataHandle< MatVecTraits, PhysicsTraits, false >
CHookesLaw	This computes the stress tensor and surface forces resulting from mechanical deformation
CHookesLaw< ScalarType, GridGeometry, typename GridGeometry::DiscretizationMethod >	Hooke's law for box scheme
CHyperelasticIndices
CHyperelasticLocalResidual	Local residual for the hyperelastic model
CHyperelasticModelTraits	HyperelasticModelTraits
CHyperelasticVolumeVariables	Volume variables for the hyperelasticity model
CHyperelasticVolumeVariablesTraits
CIdealGas	Relations valid for an ideal gas
CIdPointSource	A point source class with an identifier to attach data
CImmiscibleFlash	Determines the pressures and saturations of all fluid phases given the total mass of all components
CImmiscibleFluidState	Represents all relevant thermodynamic quantities of a multi-phase fluid system assuming immiscibility and thermodynamic equilibrium
CImmiscibleLocalResidual	Element-wise calculation of the residual for problems using the n-phase immiscible fully implicit models
CImplementsAuxiliaryFluxNavierStokesMassOneP	Traits class to be specialized for problems to add auxiliary fluxes
CIndexHelper	Helper struct to choose the correct index for phases and components. This is need if the porous-medium-flow model features more fluid phases than the free-flow model
CIndexHelper< stokesIdx, darcyIdx, FFFS, false >	Helper struct to choose the correct index for phases and components. This is need if the porous-medium-flow model features more fluid phases than the free-flow model. Specialization for the case that no adapter is used
CIndexHelper< stokesIdx, darcyIdx, FFFS, true >	Helper struct to choose the correct index for phases and components. This is need if the porous-medium-flow model features more fluid phases than the free-flow model. Specialization for the case that a adapter is used
CIndexTraits	Structure to define the index types used for grid and local indices
CInertSolidState	Represents all relevant thermodynamic quantities of a inert solid system
CIntegrationPointSource	An integration point source class with an identifier to attach data and a quadrature weight and integration element
CIntegrationPointSourceHelper	A helper class calculating a DOF-index to point source map
CInteractionVolumeAssemblerBase	Defines the general interface of the local assembler classes for the assembly of the interaction volume-local transmissibility matrix. Specializations have to be provided for the available interaction volume implementations. these should derive from this base class
CInteractionVolumeAssemblerHelper	A class that contains helper functions as well as functionality which is common to different mpfa schemes and which solely operate on the interaction volume
CInteractionVolumeDataHandle	Class for the interaction volume data handle
CInteractionVolumeDataStorage	Structure to store interaction volumes and data handles
CInteractionVolumeLocalFaceData	General implementation of a data structure holding interaction volume-local information for a grid sub-control volume face embedded in it
CIntersectionEntitySet	A class representing the intersection entities two geometric entity sets
CIntersectionInfo	An intersection object resulting from the intersection of two primitives in an entity set
CIntersectionMapper	Defines an intersection mapper for mapping of global DOFs assigned to faces which also works for adaptive grids
CisBCRSMatrix	Helper type to determine whether a given type is a Dune::BCRSMatrix
CisBCRSMatrix< Dune::BCRSMatrix< B, A > >
CIsFicksLaw	This structs indicates that Fick's law is not used for diffusion
CIsFicksLaw< FicksLawImplementation< T, DiscretizationMethod, referenceSystem > >	This structs indicates that Fick's law is used for diffusion
CisMultiTypeBlockMatrix	Helper type to determine whether a given type is a Dune::MultiTypeBlockMatrix
CisMultiTypeBlockMatrix< Dune::MultiTypeBlockMatrix< Args... > >
CisMultiTypeBlockVector	Helper type to determine whether a given type is a Dune::MultiTypeBlockVector
CisMultiTypeBlockVector< Dune::MultiTypeBlockVector< T... > >	Helper type to determine whether a given type is a Dune::MultiTypeBlockVector
CIsothermalImmiscibleFluidState	Represents all relevant thermodynamic quantities of a multi-phase fluid system assuming immiscibility and thermodynamic equilibrium
CIsSameFluidSystem	This structs helps to check if the two sub models use the same fluidsystem. Specialization for the case of using an adapter only for the free-flow model
CIsSameFluidSystem< FS, FS >	This structs helps to check if the two sub models use the same fluidsystem
CIstlSolverFactoryBackend	A linear solver using the dune-istl solver factory to choose the solver and preconditioner at runtime
CIterativePreconditionedSolverImpl	A general solver backend allowing arbitrary preconditioners and solvers
CIvDataHandlePhysicsTraits	Data handle physics traits
CKEpsilonFluxVariablesImpl	The flux variables class for the k-epsilon model using the staggered grid discretization
CKEpsilonFluxVariablesImpl< TypeTag, BaseFluxVariables, DiscretizationMethods::Staggered >
CKEpsilonIOFields	Adds I/O fields for the k-epsilon turbulence model
CKEpsilonResidualImpl	Element-wise calculation of the residual for k-epsilon models using the staggered discretization
CKEpsilonResidualImpl< TypeTag, BaseLocalResidual, DiscretizationMethods::Staggered >
CKEpsilonVolumeVariables	Volume variables for the isothermal single-phase k-epsilon model
CKOmegaFluxVariablesImpl	The flux variables class for the k-omega model using the staggered grid discretization
CKOmegaFluxVariablesImpl< TypeTag, BaseFluxVariables, DiscretizationMethods::Staggered >
CKOmegaIOFields	Adds I/O fields for the Reynolds-Averaged Navier-Stokes model
CKOmegaResidualImpl	Element-wise calculation of the residual for k-omega models using the staggered discretization
CKOmegaResidualImpl< TypeTag, BaseLocalResidual, DiscretizationMethods::Staggered >
CKOmegaVolumeVariables	Volume variables for the isothermal single-phase k-omega 2-Eq model
CLameParams	Structure encapsulating the lame parameters
CLinearAlgebraTraits
CLinearPDESolver	An implementation of a linear PDE solver
CLinearSolver	Base class for linear solvers
CLinearSolverParameters	Generates a parameter tree required for the linear solvers and precondioners of the Dune ISTL
CLinearSolverTraitsBase
CLinearSolverTraitsImpl	The implementation is specialized for the different discretizations
CLinearSolverTraitsImpl< GridGeometry, DiscretizationMethods::Box >	Box: use overlapping or non-overlapping model depending on the grid
CLinearSolverTraitsImpl< GridGeometry, DiscretizationMethods::CCMpfa >	Cell-centered mpfa: use overlapping model
CLinearSolverTraitsImpl< GridGeometry, DiscretizationMethods::CCTpfa >	Cell-centered tpfa: use overlapping model
CLinearSolverTraitsImpl< GridGeometry, DiscretizationMethods::FCDiamond >	Face-centered diamond scheme: use overlapping or non-overlapping model depending on the grid
►CLinearSolverTraitsImpl< GridGeometry, DiscretizationMethods::FCStaggered >	Face-centered staggered: use overlapping model
CDofMapper
CLinearSolverTraitsImpl< GridGeometry, DiscretizationMethods::PQ1Bubble >
CLinearSolverTraitsImpl< GridGeometry, DiscretizationMethods::Staggered >	Staggered: use overlapping model
CLoadSolutionDataHandle	Data handle to communicate the solution on ghosts and overlaps when reading from vtk file in parallel
CLocalRefinementSimplexQuadrature	A quadrature rule using local refinement to approximate partitioned elements
CLoggingParameterTree	A parameter tree that logs which parameters have been used
CLowReKEpsilonFluxVariablesImpl	The flux variables class for the low-Reynolds k-epsilon model using the staggered grid discretization
CLowReKEpsilonFluxVariablesImpl< TypeTag, BaseFluxVariables, DiscretizationMethods::Staggered >
CLowReKEpsilonIOFields	Adds I/O fields for the low-Re k-epsilon turbulence model
CLowReKEpsilonResidualImpl	Element-wise calculation of the residual for low-Reynolds k-epsilon models using the staggered discretization
CLowReKEpsilonResidualImpl< TypeTag, BaseLocalResidual, DiscretizationMethods::Staggered >
CLowReKEpsilonVolumeVariables	Volume variables for the isothermal single-phase low-Re k-epsilons model
CmakeFromIndexedType
CmakeFromIndexedType< Variadic, Indexed, std::index_sequence< IndexSeq... > >
CMatrixConverter	A helper class that converts a Dune::MultiTypeBlockMatrix into a plain Dune::BCRSMatrix TODO: allow block sizes for BCRSMatrix other than 1x1 ?
CMaxwellStefanDiffusionCoefficients	Container storing the diffusion coefficients required by the Maxwell- Stefan diffusion law. Uses the minimal possible container size and provides unified access
CMaxwellStefansLawImplementation
CMaxwellStefansLawImplementation< TypeTag, DiscretizationMethods::Box, referenceSystem >	Specialization of Maxwell Stefan's Law for the Box method
CMaxwellStefansLawImplementation< TypeTag, DiscretizationMethods::CCTpfa, referenceSystem >	Specialization of Maxwell Stefan's Law for the CCTpfa method
CMaxwellStefansLawImplementation< TypeTag, DiscretizationMethods::Staggered, referenceSystem >	Specialization of Maxwell Stefan's Law for the Staggered method
CMineralizationIOFields	Adds I/O fields specific to a NCMin model
CMineralizationLocalResidual	Element-wise calculation of the local residual for problems using a one/two-phase n-component mineralization model
CMineralizationModelTraits	Specifies a number properties of models that consider mineralization processes
CMineralizationVolumeVariables	Contains the quantities which are are constant within a sub-control volume of the finite volume grid in an m-phase, n-component, mineralization model
CMiscibleMultiPhaseComposition	Computes the composition of all phases of a N-phase, N-component fluid system assuming that all N phases are present
CMonotoneCubicSpline	A monotone cubic spline
CMpfaDimensionHelper	Dimension-specific helper class to get data required for mpfa scheme
CMpfaDimensionHelper< GridGeometry, 2, 2 >	Dimension-specific mpfa helper class for dim == 2 & dimWorld == 2
CMpfaDimensionHelper< GridGeometry, 2, 3 >	Dimension-specific mpfa helper class for dim == 2 & dimWorld == 3. Reuses some functionality of the specialization for dim = dimWorld = 2
CMpfaDimensionHelper< GridGeometry, 3, 3 >	Dimension-specific mpfa helper class for dim == 3 & dimWorld == 3
CMpfaOFacetCouplingInteractionVolumeAssembler	Specialization of the interaction volume-local assembler class for the schemes using an mpfa-o type assembly in the context of facet coupling
CMpfaOInteractionVolumeAssembler	Specialization of the interaction volume-local assembler class for the schemes using an mpfa-o type assembly
CMPNCIndices	The primary variable and equation indices for the MpNc model
CMPNCInitialConditionHelper
CMPNCIOFields	Adds I/O fields specific to the mpnc model
CMPNCLocalResidual	MpNc specific details needed to approximately calculate the local defect in the fully implicit scheme
CMPNCModelTraits	Specifies a number properties of the m-phase n-component model
CMPNCNonequilibriumModelTraits	Specifies a number properties of the m-phase n-component model in conjunction with non-equilibrium. This is necessary because the mpnc indices are affected by the non-equilibrium which can thus not be plugged on top of it that easily
CMPNCVolumeVariablesImplementation
CMPNCVolumeVariablesImplementation< Traits, false >
CMPNCVolumeVariablesImplementation< Traits, true >
CMPNCVolumeVariablesTraits	Traits class for the mpnc volume variables
CMultiBinaryCouplingManager	Coupling manager that combines an arbitrary number of binary coupling manager (coupling two domains each)
CMultiDomainAssemblerSubDomainView	Subdomain-specific view on a multidomain assembler. Allows retrieval of sub-domain specific objects w/o passing a domain id
CMultiDomainFVAssembler	A linear system assembler (residual and Jacobian) for finite volume schemes (box, tpfa, mpfa, ...) with multiple domains
CMultiDomainFVGridGeometry	A multidomain wrapper for multiple grid geometries
CMultiDomainFVGridVariables	A multidomain wrapper for multiple grid variables
CMultiDomainFVProblem	A multidomain wrapper for multiple problems
CMultiDomainNewtonConvergenceWriter	Writes the intermediate solutions for every Newton iteration
CMultiDomainNewtonSolver	Newton solver for coupled problems
►CMultiDomainTraits
CSubDomain
CMultiDomainVtkOutputModule	A multidomain wrapper for multiple vtk output modules
►CNavierStokesBoundaryTypes	Class to specify the type of a boundary condition for the Navier-Stokes model
CNavierStokesBoundaryInfo	Use bitfields to minimize the size
CNavierStokesEnergyIndices	Indices for the non-isothermal Navier-Stokes model
CNavierStokesEnergyIOFields	Adds I/O fields specific to non-isothermal free-flow models
CNavierStokesEnergyModelTraits	Specifies a number properties of non-isothermal free-flow flow models based on the specifics of a given isothermal model
CNavierStokesEnergyVolumeVariables	The isothermal base class
CNavierStokesFluxVariablesImpl	The flux variables class for the Navier-Stokes model using the staggered grid discretization
CNavierStokesFluxVariablesImpl< TypeTag, DiscretizationMethods::Staggered >
CNavierStokesIndices	The common indices for the isothermal Navier-Stokes model
CNavierStokesIOFields	Adds I/O fields for the Navier-Stokes model
CNavierStokesMassOnePFluxVariables	The flux variables class for the single-phase flow Navier-Stokes model
CNavierStokesMassOnePIndices	The common indices for the isothermal Navier-Stokes mass conservation model
CNavierStokesMassOnePLocalResidual	Element-wise calculation of the Navier-Stokes residual for single-phase flow
CNavierStokesMassOnePModelTraits	Traits for the single-phase flow Navier-Stokes mass model
CNavierStokesMassOnePNCFluxVariables	The flux variables class for the single-phase flow, multi-component Navier-Stokes model
CNavierStokesMassOnePNCIndices	The common indices for the isothermal Navier-Stokes mass conservation model
CNavierStokesMassOnePNCIOFields	Adds I/O fields specific to the FreeflowNC model
CNavierStokesMassOnePNCLocalResidual	Element-wise calculation of the Navier-Stokes residual for multicomponent single-phase flow
CNavierStokesMassOnePNCModelTraits	Traits for the Navier-Stokes model
CNavierStokesMassOnePNCVolumeVariables	Volume variables for the single-phase Navier-Stokes model
CNavierStokesMassOnePNCVolumeVariablesTraits	Traits class for the volume variables of the Navier-Stokes model
CNavierStokesMassOnePVolumeVariables	Volume variables for the single-phase Navier-Stokes model
CNavierStokesMassOnePVolumeVariablesTraits	Traits class for the volume variables of the Navier-Stokes model
CNavierStokesMassProblemImpl
CNavierStokesModelTraits	Traits for the Navier-Stokes model
CNavierStokesMomentumBoundaryFlux	Class to compute the boundary flux for the momentum balance of the Navier-Stokes model This helper class is typically used in the Neumann function of the momentum problem
CNavierStokesMomentumBoundaryFlux< DiscretizationMethods::FCStaggered, SlipVelocityPolicy >	Class to compute the boundary flux for the momentum balance of the Navier-Stokes model This helper class is typically used in the Neumann function of the momentum problem
►CNavierStokesMomentumBoundaryTypes	Class to specify the type of a boundary condition for the Navier-Stokes model
CNavierStokesBoundaryInfo	Use bitfields to minimize the size
CNavierStokesMomentumCVFEIndices	The common indices for the isothermal Navier-Stokes model
CNavierStokesMomentumCVFELocalResidual	Element-wise calculation of the Navier-Stokes residual for models using CVFE discretizations
CNavierStokesMomentumCVFEModelTraits	Traits for the Navier-Stokes model
CNavierStokesMomentumCVFEVolumeVariables	Volume variables for the single-phase Navier-Stokes model
CNavierStokesMomentumCVFEVolumeVariablesTraits	Traits class for the volume variables of the Navier-Stokes model
CNavierStokesMomentumFluxContext	Context for computing fluxes
CNavierStokesMomentumFluxCVFE	The flux variables class for the Navier-Stokes model using control-volume finite element schemes
CNavierStokesMomentumFluxVariables	The flux variables class for the Navier-Stokes model using the staggered grid discretization
CNavierStokesMomentumIndices	The common indices for the isothermal Navier-Stokes model
CNavierStokesMomentumModelTraits	Traits for the Navier-Stokes model
CNavierStokesMomentumProblemImpl
CNavierStokesMomentumProblemImpl< TypeTag, DiscretizationMethods::CVFE< DM > >	Navier-Stokes default problem implementation for CVFE discretizations
CNavierStokesMomentumProblemImpl< TypeTag, DiscretizationMethods::FCStaggered >
CNavierStokesMomentumResidual	Element-wise calculation of the Navier-Stokes residual for models using the staggered discretization
CNavierStokesMomentumVolumeVariables	Volume variables for the single-phase Navier-Stokes model
CNavierStokesMomentumVolumeVariablesTraits	Traits class for the volume variables of the Navier-Stokes model
CNavierStokesNCModelTraits	Traits for the multi-component free-flow model
CNavierStokesResidualImpl	Element-wise calculation of the Navier-Stokes residual for models using the staggered discretization
CNavierStokesResidualImpl< TypeTag, DiscretizationMethods::Staggered >
CNavierStokesScalarBoundaryFluxHelper	Navier Stokes scalar boundary flux helper
►CNavierStokesScalarConservationModelFluxVariables	The flux variables base class for scalar quantities balanced in the Navier-Stokes model
CAdvectionType
CNavierStokesScalarConservationModelVolumeVariables	Volume variables for the single-phase Navier-Stokes model
CNavierStokesSlipVelocity	Navier Stokes slip velocity policy
CNavierStokesSlipVelocity< DiscretizationMethods::FCStaggered, SlipCondition >	Navier Stokes slip velocity helper for fcstaggered discretization
CNavierStokesStaggeredProblem	Navier-Stokes staggered problem base class
CNavierStokesVelocityOutput	Velocity output for staggered free-flow models
CNavierStokesVolumeVariables	Volume variables for the single-phase Navier-Stokes model
CNavierStokesVolumeVariablesTraits	Traits class for the volume variables of the Navier-Stokes model
CNcpFlash	Determines the phase compositions, pressures and saturations given the total mass of all components
CNetPBMReader	A simple reader class for the Netpbm format (https://en.wikipedia.org/wiki/Netpbm_format). So far, only black and white (*.pbm) and grayscale (*pgm) images are supported
CNetPBMWriter	A simple reader class for the Netpbm format (https://en.wikipedia.org/wiki/Netpbm_format). So far, only black and white (*.pbm) and grayscale (*pgm) images are supported
CNewtonConvergenceWriter	Writes the intermediate solutions for every Newton iteration
CNewtonSolver	An implementation of a Newton solver
CNodalIndexSetDefaultTraits	Default traits to be used in conjunction with the dual grid nodal index set
CNoExtrusion	Default implementation that performs no extrusion (extrusion with identity)
CNonconformingFECache
CNonConformingGridIntersectionMapper	Defines an intersection mapper for mapping of global DOFs assigned to faces which also works for non-conforming grids and corner-point grids
CNonEquilbriumIndices	The primary variable and equation indices for the MpNc model
CNonEquilibriumFluidState	Represents all relevant thermodynamic quantities of a multi-phase, multi-component fluid system without using any assumptions
CNonEquilibriumGridVariables	This class stores the velocities which are used to compute Reynolds numbers for the source terms of non-equilibrium models
CNonEquilibriumIOFieldsImplementation
CNonEquilibriumIOFieldsImplementation< ModelTraits, EquilibriumIOFields, false >
CNonEquilibriumIOFieldsImplementation< ModelTraits, EquilibriumIOFields, true >	Adds I/O fields specific to non-equilibrium models with chemical and thermal nonequilbirum or thermal non-equilibrium only
CNonEquilibriumLocalResidualImplementation
CNonEquilibriumLocalResidualImplementation< TypeTag, false >	The local residual for a model without chemical non-equilibrium but potentially with thermal non-equilibrium
CNonEquilibriumLocalResidualImplementation< TypeTag, true >	The local residual for a model assuming chemical non-equilibrium and potentially thermal non-equilibrium
CNonEquilibriumMassFluidState	Represents all relevant thermodynamic quantities of a multi-phase, multi-component fluid system
CNonEquilibriumModelTraits	Specifies a number properties of porous-medium flow non-equilibrium models
CNonEquilibriumNewtonSolver	A nonequilibrium specific newton solver
CNonEquilibriumVolumeVariablesImplementation	This class contains the volume variables required for the modules which require the specific interfacial area between fluid phases
CNonEquilibriumVolumeVariablesImplementation< Traits, EquilibriumVolumeVariables, false, true, 1 >
CNonEquilibriumVolumeVariablesImplementation< Traits, EquilibriumVolumeVariables, false, true, 2 >
CNonEquilibriumVolumeVariablesImplementation< Traits, EquilibriumVolumeVariables, true, false, 0 >
CNonEquilibriumVolumeVariablesImplementation< Traits, EquilibriumVolumeVariables, true, true, 2 >
CNonoverlappingSolverTraits
CNoPrimaryVariableSwitch	Empty class for models without pri var switch
CNullParameterCache	The a parameter cache which does nothing
CNumEqVectorTraits
CNumEqVectorTraits< SwitchablePrimaryVariables< PrimaryVariables, StateType > >	The corresponding NumEqVectorTraits for the primary variables with switchable state
CNumericalProblem	Exception thrown if a fixable numerical problem occurs
CNumericDifferentiation	A class for numeric differentiation with respect to a scalar parameter
CNumericEpsilon	A helper class for local assemblers using numeric differentiation to determine the epsilon
COneEqFluxVariablesImpl	The flux variables class for the one-equation model by Spalart-Allmaras using the staggered grid discretization
COneEqFluxVariablesImpl< TypeTag, BaseFluxVariables, DiscretizationMethods::Staggered >
COneEqIndices	The common indices for the isothermal one-equation turbulence model by Spalart-Allmaras
COneEqIOFields	Adds I/O fields for the one-equation turbulence model by Spalart-Allmaras
COneEqResidualImpl	Element-wise calculation of the residual for one-equation turbulence models using the staggered discretization
COneEqResidualImpl< TypeTag, BaseLocalResidual, DiscretizationMethods::Staggered >
COneEqVolumeVariables	Volume variables for the isothermal single-phase one-equation turbulence model by Spalart-Allmaras
COnePIncompressibleLocalResidual	Element-wise calculation of the residual and its derivatives for a single-phase, incompressible, test problem
COnePIndices	Indices for the one-phase model
COnePIOFields	Adds I/O fields specific to the one phase model
COnePModelTraits	Specifies a number properties of single-phase models
COnePNCIndices	The indices for the isothermal one-phase n-component model
COnePNCIOFields	Adds I/O fields specific to the OnePNC model
COnePNCModelTraits	Specifies a number properties of models that consider a single-phase with multiple components
COnePNCUnconstrainedModelTraits
COnePNCVolumeVariables	Contains the quantities which are are constant within a finite volume in the one-phase, n-component model
COnePVolumeVariables	Contains the quantities which are constant within a sub-control volume in the one-phase model
COnePVolumeVariablesTraits	Traits class for the volume variables of the single-phase model
COptionalScalar	A type for an optional scalar (contains either a valid number or NaN)
COverlappingSolverTraits
CParallelMatrixHelper	Helper class for adding up matrix entries for border entities
CParallelMultiTypeMatrixAdapter	Adapter to turn a multi-type matrix into a thread-parallel linear operator. Adapts a matrix to the assembled linear operator interface
CParallelMultiTypeScalarProduct	A scalar product for multi-type vectors
CParallelVectorHelper
CParameterCacheBase	The base class of the parameter cache classes for fluid systems
CParameterException	Exception thrown if a run-time parameter is not specified correctly
CParameters	Parameter class managing runtime input parameters
CParMTJac	Multi-threaded Jacobi preconditioner
CParMTSOR	Multi-threaded SOR preconditioner using coloring
CParMTSSOR	Multithreaded SSOR preconditioner using coloring
CPartialReassembler	Detects which entries in the Jacobian have to be recomputed
CPartialReassemblerEngine	Partial reassembler engine specialized for discretization methods
CPartialReassemblerEngine< Assembler, DiscretizationMethods::Box >	The partial reassembler engine specialized for the box method
CPartialReassemblerEngine< Assembler, DiscretizationMethods::CCMpfa >	The partial reassembler engine specialized for the cellcentered MPFA method
CPartialReassemblerEngine< Assembler, DiscretizationMethods::CCTpfa >	The partial reassembler engine specialized for the cellcentered TPFA method
CPDESolver	A high-level interface for a PDESolver
CPengRobinson	Implements the Peng-Robinson equation of state for liquids and gases
CPengRobinsonMixture	Implements the Peng-Robinson equation of state for a mixture
CPengRobinsonParams	Stores and provides access to the Peng-Robinson parameters
CPengRobinsonParamsMixture	The mixing rule for the oil and the gas phases of the SPE5 problem
CPermeabilityKozenyCarman	The Kozeny-Carman relationship for the calculation of a porosity-dependent permeability. When the porosity is implemented as solution-independent, using this relationship for the permeability leads to unnecessary overhead
CPlotEffectiveDiffusivityModel	Interface for plotting the multi-component-matrix-interaction laws
CPlotMaterialLaw	Interface for plotting the three-phase fluid-matrix-interaction laws TODO: add theta head pressure plot (porosity and density is needed)
CPlotThermalConductivityModel	Interface for plotting the non-isothermal two-phase fluid-matrix-interaction laws
CPointCloudVtkWriter	A VTK output module to simplify writing dumux simulation data to VTK format
CPointSource	A point source base class
CPointSourceData	A point source data class used for integration in multidimensional models
CPointSourceDataCircleAverage	A point source data class used for integration in multidimensional models
CPoroElasticIOFields	Adds I/O fields specific to the poro-elastic model
CPoroElasticLocalResidual	Element-wise calculation of the local residual for problems using the poroelastic model
CPoroElasticModelTraits	Specifies a number properties of the poroelastic model
CPoroElasticVolumeVariables	Contains the quantities which are constant within a finite volume in the poroelastic model
CPoroMechanicsCouplingManager	Coupling manager for porous medium flow problems coupled to a poro-mechanical problem
CPorosityDeformation	A relationship for the porosity of a porous medium under mechanical deformation
CPorosityPrecipitation	Calculates the porosity depending on the volume fractions of precipitated minerals
CPorousMediumFlowNIModelTraits	Specifies a number properties of non-isothermal porous medium flow models based on the specifics of a given isothermal model
CPorousMediumFlowProblem	Base class for all fully implicit porous media problems
CPorousMediumFlowVelocity	Velocity computation for implicit (porous media) models
CPorousMediumFlowVelocityOutput	Velocity output policy for implicit (porous media) models
CPorousMediumFlowVolumeVariables	The isothermal base class
CPorousMediumFluxVariables	The porous medium flux variables class that computes advective / convective, molecular diffusive and heat conduction fluxes
CPorousMediumFluxVariablesCacheFillerImplementation
CPorousMediumFluxVariablesCacheFillerImplementation< TypeTag, DiscretizationMethods::CCMpfa >	Specialization of the flux variables cache filler for the cell centered mpfa method
CPorousMediumFluxVariablesCacheFillerImplementation< TypeTag, DiscretizationMethods::CCTpfa >	Specialization of the flux variables cache filler for the cell centered tpfa method
CPorousMediumFluxVariablesCacheImplementation
CPorousMediumFluxVariablesCacheImplementation< TypeTag, DiscretizationMethods::CCMpfa >
CPorousMediumFluxVariablesCacheImplementation< TypeTag, DiscretizationMethods::CCTpfa >
CPorousMediumFluxVariablesCacheImplementation< TypeTag, DiscretizationMethods::CVFE< DM > >
CPQ1BubbleDefaultGridGeometryTraits	The default traits for the pq1bubble finite volume grid geometry Defines the scv and scvf types and the mapper types
CPQ1BubbleDefaultScvfGeometryTraits	Default traits class to be used for the sub-control volume faces for the cvfe scheme
CPQ1BubbleDefaultScvGeometryTraits	Default traits class to be used for the sub-control volumes for the pq1bubble scheme
CPQ1BubbleFECache
CPQ1BubbleFVElementGeometry	Base class for the finite volume geometry vector for pq1bubble models This builds up the sub control volumes and sub control volume faces for each element
CPQ1BubbleFVElementGeometry< GG, true >	Specialization in case the FVElementGeometries are stored
CPQ1BubbleFVGridGeometry	Base class for the finite volume geometry vector for pq1bubble schemes This builds up the sub control volumes and sub control volume faces
CPQ1BubbleGeometryHelper	A class to create sub control volume and sub control volume face geometries per element
CPQ1BubbleLocalFiniteElement	P1/Q1 + Bubble finite element
CPQ1BubbleMapperTraits
►CPQ1BubbleMLGeometryTraits	Traits for an efficient corner storage for the PQ1Bubble method
CCornerStorage
CPQ1BubbleSubControlVolume	Sub control volume for the pq1bubble scheme
CPQ1BubbleSubControlVolumeFace	Class for a sub control volume face in the cvfe method, i.e a part of the boundary of a sub control volume we compute fluxes on. We simply use the base class here
CPressureOverlayFluidState	This is a fluid state which allows to set the fluid pressures and takes all other quantities from an other fluid state
CPrimaryVariableSwitch	The primary variable switch controlling the phase presence state variable
CPrimaryVariableSwitchAdapter	An adapter for the Newton to manage models with primary variable switch
CPrimaryVariableSwitchAdapter< Variables, false >	An empty adapter for the Newton for models without primary variable switch
CProblemTraits	Type traits for problem classes
►CProjector	Does an L2-projection from one discrete function space into another. The convenience functions makeProjectorPair or makeProjector can be used to create such a projection
CParams	Parameters that can be passed to project()
CProjectorTraits	Traits class stating the type of projector between to bases
CPseudoOnePTwoCFluidState	Container for compositional variables in a 1p2c situation
CRANSBoundaryTypes	Class to specify the type of a boundary condition for the RANS extension to the Navier-Stokes model
CRANSIOFields	Adds I/O fields for the Reynolds-Averaged Navier-Stokes model
CRANSProblemBase	Reynolds-Averaged Navier-Stokes problem base class
CRANSProblemImpl	Forward declare
CRANSProblemImpl< TypeTag, TurbulenceModel::kepsilon >	K-epsilon turbulence problem base class
CRANSProblemImpl< TypeTag, TurbulenceModel::komega >	K-Omega turbulence model problem base class
CRANSProblemImpl< TypeTag, TurbulenceModel::lowrekepsilon >	Low-Re k-epsilon turbulence problem base class
CRANSProblemImpl< TypeTag, TurbulenceModel::oneeq >	One-equation turbulence problem base class
CRANSProblemImpl< TypeTag, TurbulenceModel::sst >	SST turbulence model problem base class
CRANSProblemImpl< TypeTag, TurbulenceModel::zeroeq >	Zero-equation turbulence problem base class
CRANSTwoEqIndices	The common indices for isothermal two-equation RANS models
CRANSVolumeVariables	Volume variables for the isothermal single-phase Reynolds-Averaged Navier-Stokes models
CRefinementQuadratureRule	A "quadrature" based on virtual refinement
CReservedBlockVector	A arithmetic block vector type based on DUNE's reserved vector
CRestart	Load or save a state of a model to/from the harddisk
CRichardsBalanceEquationOptions	Traits class to set options used by the local residual when when evaluating the balance equations
CRichardsIndices	Index names for the Richards model
CRichardsIOFields	Adds I/O fields specific to the Richards model
CRichardsLocalResidual	Element-wise calculation of the Jacobian matrix for problems using the Richards fully implicit models
CRichardsModelTraits	Specifies a number properties of the Richards model
CRichardsNCIndices	The indices for the isothermal Richards, n-component model
CRichardsNCIOFields	Adds I/O fields specific to the Richards model
CRichardsNCModelTraits	Specifies a number properties of the Richards n-components model
CRichardsNCVolumeVariables	Contains the quantities which are constant within a finite volume in the Richards, n-component model
CRichardsNCVolumeVariablesTraits	Traits class for the Richards n-components model
CRichardsNewtonSolver	A Richards model specific Newton solver
CRichardsVelocityOutput	Velocity output policy for the Richards model
CRichardsVolumeVariables	Volume averaged quantities required by the Richards model
CRichardsVolumeVariablesTraits	Traits class for the Richards model
CRotationalExtrusion	Rotation symmetric extrusion policy for rotating about an external axis
CSaturationOverlayFluidState	This is a fluid state which allows to set the fluid saturations and takes all other quantities from an other fluid state
CScheideggersDispersionTensor	Scheidegger's dispersion tensor
CScotchBackend	A reordering backend using the scotch library
CScotchPartitioner	A reordering backend using the scotch library
CScvfIterator	Iterators over sub control volume faces of an fv geometry
CScvfToScvBoundaryTypes	Convert intersection boundary types to vertex boundary types
CScvIterator	Iterators over sub control volumes
CSeqLinearSolverTraits
CSequentialSolverTraits	Sequential solver traits
CSeqUzawa	A preconditioner based on the Uzawa algorithm for saddle-point problems of the form $\left(\begin{array}{cc}A& B\\ C& D\end{array}\right)\left(\begin{array}{c}u\\ p\end{array}\right)=\left(\begin{array}{c}f\\ g\end{array}\right)$
CShallowWaterFlux	Prepare and compute the shallow water advective flux
CShallowWaterFluxVariables	The flux variables class for the shallow water model
CShallowWaterIndices	The common indices for the shallow water equations model
CShallowWaterIOFields	Adds vtk output fields for the shallow water model
CShallowWaterModelTraits	Specifies a number properties of shallow water models
CShallowWaterProblem	Shallow water problem base class
CShallowWaterResidual	Element-wise calculation of the residual for the shallow water equations
CShallowWaterViscousFlux	Compute the shallow water viscous momentum flux due to viscosity
CShallowWaterVolumeVariables	Volume variables for the shallow water equations model
CShallowWaterVolumeVariablesTraits	Traits class for the volume variables of the shallow water model
CShomateMethod	The Shomate method to compute enthalpy and heat capacity
CSimpleLogNormalDistribution	A simple log-normal distribution
CSimpleNormalDistribution	A simple normal distribution based on a biased uniform number generator and the Box-Mueller transform
CSimpleUniformDistribution	A simple uniform distribution based on a biased uniform number generator
CSingleGeometryEntitySet	An interface for a geometric entity set with a single geometry
CSkippingScvfIterator	Iterators over sub control volume faces of an fv geometry and a given sub control volume
CSolDependentPointSource	A point source class for time dependent point sources
CSolidEnergyIndices	The indices
CSolidEnergyLocalResidual	Element-wise calculation of the residual
CSolidEnergyModelTraits	The energy balance equation for a porous solid
CSolidEnergyVolumeVariables	Class for computation of all volume averaged quantities
CSolidEnergyVolumeVariablesTraits	The volume variable traits
CSpe5ParameterCache	Specifies the parameters required by the SPE5 problem which are despondent on the thermodynamic state
CSphere	A simple sphere type
CSphericalExtrusion	Rotation symmetric extrusion policy for spherical rotation
CSpline	A 3rd order polynomial spline
CSpline< Scalar, -1 >	Specialization of a spline with the number of sampling points only known at run time
CSpline< Scalar, 0 >	Do not allow splines with zero sampling points
CSpline< Scalar, 1 >	Do not allow splines with one sampling point
CSpline< Scalar, 2 >	Spline for two sampling points
CSSTFluxVariablesImpl	The flux variables class for the SST model using the staggered grid discretization
CSSTFluxVariablesImpl< TypeTag, BaseFluxVariables, DiscretizationMethods::Staggered >
CSSTIOFields	Adds I/O fields for the Reynolds-Averaged Navier-Stokes model
CSSTResidualImpl	Element-wise calculation of the residual for SST models using the staggered discretization
CSSTResidualImpl< TypeTag, BaseLocalResidual, DiscretizationMethods::Staggered >
CSSTVolumeVariables	Volume variables for the isothermal single-phase SST 2-Eq model
CStaggeredCouplingManager	Base coupling manager for the staggered discretization
CStaggeredDefaultGridFaceVariablesTraits	Traits class to be used for the StaggeredGridFaceVariables
CStaggeredDefaultGridFluxVariablesCacheTraits	Traits class to be used for the StaggeredGridVFluxVariablesCache
CStaggeredDefaultScvfGeometryTraits	Default traits class to be used for the sub-control volume faces for the staggered finite volume scheme
CStaggeredElementFaceVariables	Base class for the face variables vector
CStaggeredElementFaceVariables< GFV, false >	Class for the face variables vector. Specialization for the case of not storing the face variables globally
CStaggeredElementFaceVariables< GFV, true >	Class for the face variables vector. Specialization for the case of storing the face variables globally
CStaggeredElementFluxVariablesCache	Base class for the stencil local flux variables cache for the staggered model
CStaggeredElementFluxVariablesCache< GFVC, false >	Class for the stencil local flux variables cache for the staggered model. Specialization for the case of not storing the fluxvars cache globally
CStaggeredElementFluxVariablesCache< GFVC, true >	Class for the stencil local flux variables cache for the staggered model. Specialization for the case of storing the fluxvars cache globally
CStaggeredElementVolumeVariables	Base class for the element volume variables vector for the staggered model
CStaggeredElementVolumeVariables< GVV, false >	Class for the element volume variables vector for the staggered model. Specialization in case the volume variables are not stored globally
CStaggeredElementVolumeVariables< GVV, true >	Class for the element volume variables vector for the staggered model. Specialization in case the volume variables are stored globally
CStaggeredFaceSolution	The global face variables class for staggered models
CStaggeredFaceVariables	The face variables class for free flow staggered grid models. Contains all relevant velocities for the assembly of the momentum balance. When the upwindSchemeOrder is set to 2, additional velocities located at Dofs further from the central stencil will be added and used when calculating the advective term. When the order remains at 1, these velocities will not be provided
CStaggeredFreeFlowConnectivityMap	Stores the dof indices corresponding to the neighboring cell centers and faces that contribute to the derivative calculation. Specialization for the staggered free flow model
►CStaggeredFreeFlowDefaultFVGridGeometryTraits	Default traits for the finite volume grid geometry
CDofTypeIndices
CPublicTraits
CStaggeredFreeFlowPoreNetworkCouplingMapper	Coupling mapper for staggered free-flow and pore-network models
CStaggeredFreeFlowVelocityOutput	Velocity output for staggered free-flow models
CStaggeredFVAssembler	A linear system assembler (residual and Jacobian) for staggered finite volume schemes. This is basically just a wrapper for the MultiDomainFVAssembler which simplifies the set-up of uncoupled problems using the staggered scheme
CStaggeredFVElementGeometry	Stencil-local finite volume geometry (scvs and scvfs) for staggered models This builds up the sub control volumes and sub control volume faces for each element in the local scope we are restricting to, e.g. stencil or element
CStaggeredFVElementGeometry< GG, false >	Base class for the finite volume geometry vector for staggered models This locally builds up the sub control volumes and sub control volume faces for each element. Specialization for grid caching disabled
CStaggeredFVElementGeometry< GG, true >	Base class for the finite volume geometry vector for staggered models This locally builds up the sub control volumes and sub control volume faces for each element. Specialization for grid caching enabled
CStaggeredFVGridGeometry	Base class for the finite volume geometry vector for staggered models This builds up the sub control volumes and sub control volume faces for each element
CStaggeredFVGridGeometry< GV, false, T >	Base class for the finite volume geometry vector for staggered models This builds up the sub control volumes and sub control volume faces for each element. Specialization in case the FVElementGeometries are stored
CStaggeredFVGridGeometry< GV, true, T >	Base class for the finite volume geometry vector for staggered models This builds up the sub control volumes and sub control volume faces for each element. Specialization in case the FVElementGeometries are stored
CStaggeredFVProblem	Base class for all staggered finite-volume problems
CStaggeredGridDefaultGridVolumeVariablesTraits
CStaggeredGridFaceVariables	Face variables cache class for staggered models
CStaggeredGridFaceVariables< P, FV, false, Traits >	Face variables cache class for staggered models. Specialization in case of not storing the face variables
CStaggeredGridFaceVariables< P, FV, true, Traits >	Face variables cache class for staggered models. Specialization in case of storing the face variables
CStaggeredGridFluxVariablesCache	Flux variables cache class for staggered models
CStaggeredGridFluxVariablesCache< P, FVC, FVCF, false, upwindSchemeOrder, TheTraits >	Flux variables cache class for staggered models. Specialization in case of not storing the flux cache
CStaggeredGridFluxVariablesCache< P, FVC, FVCF, true, upwindSchemeOrder, TheTraits >	Flux variables cache class for staggered models. Specialization in case of storing the flux cache
CStaggeredGridVariables	Class storing data associated to scvs and scvfs
CStaggeredGridVariablesView	Base class for cell center of face specific auxiliary GridVariables classes. Provides a common interface and a pointer to the actual grid variables
CStaggeredGridVolumeVariables	Grid volume variables class for staggered models
CStaggeredGridVolumeVariables< Traits, false >	Grid volume variables class for staggered models. Specialization in case of not storing the volume variables
CStaggeredGridVolumeVariables< Traits, true >	Grid volume variables class for staggered models. Specialization in case of storing the volume variables
CStaggeredLocalResidual	Calculates the element-wise residual for the staggered FV scheme
►CStaggeredMultiDomainTraits
CSubDomain
CStaggeredNewtonConvergenceWriter	Writes the intermediate solutions for every Newton iteration (for staggered grid scheme)
CStaggeredSubControlVolumeFace	Class for a sub control volume face in the staggered method, i.e a part of the boundary of a sub control volume we compute fluxes on
CStaggeredUpwindHelper	The upwinding variables class for the Navier-Stokes model using the staggered grid discretization
CStaggeredUpwindMethods	This file contains different higher order methods for approximating the velocity
CStaggeredVelocityGradients	Helper class for calculating the velocity gradients for the Navier-Stokes model using the staggered grid discretization
CStaggeredVelocityReconstruction	Helper class for reconstructing the velocity
CStaggeredVtkOutputModule	A VTK output module to simplify writing dumux simulation data to VTK format Specialization for staggered grids with dofs on faces
CStationaryVelocityField	Evaluates a user given velocity field
CStokesDarcyCouplingDataImplementation
CStokesDarcyCouplingDataImplementation< MDTraits, CouplingManager, enableEnergyBalance, false >	Coupling data specialization for non-compositional models
CStokesDarcyCouplingDataImplementation< MDTraits, CouplingManager, enableEnergyBalance, true >	Coupling data specialization for compositional models
CStokesDarcyCouplingDataImplementationBase	A base class which provides some common methods used for Stokes-Darcy coupling
CStokesDarcyCouplingManager	Coupling manager for Stokes and Darcy domains with equal dimension
CStokesDarcyCouplingMapper	Coupling mapper for Stokes and Darcy domains with equal dimension
CStokesDarcyCouplingOptions	This structs holds a set of options which allow to modify the Stokes-Darcy coupling mechanism during runtime
CStokesSolver	Preconditioned iterative solver for the incompressible Stokes problem
CStressVariablesCache	The stress variables cache classes for models involving geomechanics. Store data required for stress calculation
CStressVariablesCache< Scalar, GridGeometry, DiscretizationMethods::Box >	We only store discretization-related quantities for the box method
CStressVariablesCache< Scalar, GridGeometry, DiscretizationMethods::CCMpfa >
CStressVariablesCache< Scalar, GridGeometry, DiscretizationMethods::CCTpfa >
CSubControlVolumeBase	Base class for a sub control volume, i.e a part of the control volume we are making the balance for. Defines the general interface
CSubControlVolumeFaceBase	Base class for a sub control volume face, i.e a part of the boundary of a sub control volume we computing a flux on
CSubDomainCCLocalAssembler	The cell-centered scheme multidomain local assembler
CSubDomainCCLocalAssembler< id, TypeTag, Assembler, DiffMethod::analytic, true >	Cell-centered scheme local assembler using analytic differentiation and implicit time discretization
CSubDomainCCLocalAssembler< id, TypeTag, Assembler, DiffMethod::numeric, false >	Cell-centered scheme multidomain local assembler using numeric differentiation and explicit time discretization
CSubDomainCCLocalAssembler< id, TypeTag, Assembler, DiffMethod::numeric, true >	Cell-centered scheme multidomain local assembler using numeric differentiation and implicit time discretization
CSubDomainCCLocalAssemblerBase	A base class for all multidomain local assemblers
CSubDomainCVFELocalAssembler	The CVFE scheme multidomain local assembler
CSubDomainCVFELocalAssembler< id, TypeTag, Assembler, DiffMethod::numeric, false >	CVFE scheme multi domain local assembler using numeric differentiation and explicit time discretization
CSubDomainCVFELocalAssembler< id, TypeTag, Assembler, DiffMethod::numeric, true >	CVFE scheme multi domain local assembler using numeric differentiation and implicit time discretization
CSubDomainCVFELocalAssemblerBase	A base class for all CVFE subdomain local assemblers
CSubDomainFaceCenteredLocalAssembler	The face-centered staggered scheme multidomain local assembler
CSubDomainFaceCenteredLocalAssembler< id, TypeTag, Assembler, DiffMethod::numeric, false >	Face-centered staggered scheme multi domain local assembler using numeric differentiation and explicit time discretization
CSubDomainFaceCenteredLocalAssembler< id, TypeTag, Assembler, DiffMethod::numeric, true >	Face-centered staggered scheme multi domain local assembler using numeric differentiation and implicit time discretization
CSubDomainFaceCenteredLocalAssemblerBase	A base class for all face-centered staggered local assemblers
CSubDomainStaggeredLocalAssembler	The staggered multidomain local assembler
CSubDomainStaggeredLocalAssembler< id, TypeTag, Assembler, DiffMethod::numeric, true >	Staggered scheme local assembler using numeric differentiation and implicit time discretization
CSubDomainStaggeredLocalAssemblerBase	A base class for all multidomain local assemblers (staggered)
CSubDomainStaggeredLocalAssemblerImplicitBase	A base class for all implicit multidomain local assemblers (staggered)
CSupportsColoring	Traits specifying if a given discretization tag supports coloring
CSupportsColoring< DiscretizationMethods::Box >
CSupportsColoring< DiscretizationMethods::CCMpfa >
CSupportsColoring< DiscretizationMethods::CCTpfa >
CSupportsColoring< DiscretizationMethods::FCDiamond >
CSupportsColoring< DiscretizationMethods::FCStaggered >
CSupportsColoring< DiscretizationMethods::PQ1Bubble >
CSwitchablePrimaryVariables	A primary variable vector with a state to allow variable switches
CTabulated2DFunction	Implements tabulation for a two-dimensional function
CTemperatureOverlayFluidState	This is a fluid state which allows to set the fluid temperatures and takes all other quantities from an other fluid state
CThermalConductivityAverage	Effective thermal conductivity based on weighted arithmetic average
CThermalConductivityJohansen	Relation for the saturation-dependent effective thermal conductivity
CThermalConductivitySolidEnergy
CThermalConductivitySomertonThreeP	Effective thermal conductivity after Somerton
CThermalConductivitySomertonTwoP	Effective thermal conductivity after Somerton
CThreePIndices	The common indices for the isothermal three-phase model
CThreePIOFields	Adds I/O fields specific to the three-phase model
CThreePModelTraits	Specifies a number properties of three-phase models
CThreePThreeCIndices	The indices for the isothermal three-phase three-component model
CThreePThreeCIOFields	Adds I/O fields specific to the three-phase three-component model
CThreePThreeCLocalResidual	Element-wise calculation of the Jacobian matrix for problems using the three-phase three-component fully implicit model
CThreePThreeCModelTraits	Specifies a number properties of two-phase models
CThreePThreeCPrimaryVariableSwitch	The primary variable switch controlling the phase presence state variable
CThreePThreeCVolumeVariables	Contains the quantities which are are constant within a finite volume in the three-phase three-component model
CThreePVolumeVariables	Contains the quantities which are constant within a finite volume in the three-phase model
CThreePVolumeVariablesTraits	Traits class for the two-phase model
CThreePWaterOilIndices	The indices for the isothermal 3p2cni model
CThreePWaterOilIOFields	Adds I/O fields specific to the three-phase three-component model
CThreePWaterOilLocalResidual	Element-wise calculation of the local residual for problems using the ThreePWaterOil fully implicit model
CThreePWaterOilModelTraits	Specifies a number properties of the three-phase two-component model
CThreePWaterOilPrimaryVariableSwitch	The primary variable switch controlling the phase presence state variable
CThreePWaterOilVolumeVariables	Contains the quantities which are are constant within a finite volume in the three-phase, two-component model
CTimeLoop	The default time loop for instationary simulations
CTimeLoopBase	Manages the handling of time dependent problems
CTpfaDarcysLawCache	The cache corresponding to tpfa Darcy's Law
CTpfaDarcysLawCacheFiller	Class that fills the cache corresponding to tpfa Darcy's Law
CTpfaForchheimersLawCache	The cache corresponding to tpfa Forchheimer's Law
CTpfaForchheimersLawCacheFiller	Class that fills the cache corresponding to tpfa Forchheimer's Law
CTracerIndices	Defines the primary variable and equation indices used by the isothermal tracer model
CTracerIOFields	Adds I/O fields specific to the tracer model
CTracerLocalResidual	Element-wise calculation of the local residual for problems using fully implicit tracer model
CTracerModelTraits	Specifies a number properties of the Richards n-components model
CTracerVolumeVariables	Contains the quantities which are constant within a finite volume for the tracer model
CTracerVolumeVariablesTraits	Traits class for the volume variables of the single-phase model
CTurbulenceProperties	This class contains different functions for estimating turbulence properties
CTwoPGridAdaptIndicator	Class defining a standard, saturation dependent indicator for grid adaptation
CTwoPGridDataTransfer	Class performing the transfer of data on a grid from before to after adaptation
CTwoPIncompressibleLocalResidual	Element-wise calculation of the residual and its derivatives for a two-phase, incompressible test problem
CTwoPIndices	Defines the indices required for the two-phase fully implicit model
CTwoPIOFields	Adds I/O fields specific to the two-phase model
CTwoPModelTraits	Specifies a number properties of two-phase models
CTwoPNCIndices	The indices for the isothermal two-phase n-component model
CTwoPNCIOFields	Adds I/O fields specific to the TwoPNC model
CTwoPNCModelTraits	Specifies a number properties of two-phase n-component models
CTwoPNCPrimaryVariableSwitch	The primary variable switch controlling the phase presence state variable
CTwoPNCVolumeVariables	Contains the quantities which are are constant within a finite volume in the two-phase, n-component model
CTwoPOneCDarcysLaw	Specialization of Darcy's Law for the two-phase one-component model, including a the possibility to block spurious fluxes of cold water into the steam zone, which can improve the model's convergence behavior (Gudbjerg et al., 2005) [45]
CTwoPOneCIndices	The indices for the two-phase one-component model
CTwoPOneCIOFields	Adds I/O fields specific to two-phase one-component model
CTwoPOneCLocalResidual	Element-wise calculation of the residual for the fully implicit two-phase one-component flow model
CTwoPOneCNIModelTraits	Specifies a number properties of models considering two phases with water as a single component
CTwoPOneCPrimaryVariableSwitch	The primary variable switch for the two-phase one-component model
CTwoPOneCVolumeVariables	The volume variables (i.e. secondary variables) for the two-phase one-component model
CTwoPOneCVolumeVariablesTraits	Traits class for the two-phase model
CTwoPScvSaturationReconstruction	Class that computes the nonwetting saturation in an scv from the saturation at the global degree of freedom
CTwoPScvSaturationReconstruction< DiscretizationMethods::Box, true >	Specialization for the box scheme with the interface solver enabled
CTwoPTwoCCO2PrimaryVariableSwitch	The primary variable switch for the 2p2c-CO2 model controlling the phase presence state variable
CTwoPTwoCCO2VolumeVariables	Contains the quantities which are are constant within a finite volume in the CO2 model
CTwoPTwoCUnconstrainedModelTraits
CTwoPTwoCVolumeVariablesBase	Contains the quantities which are constant within a finite volume in the two-phase two-component model. This is the base class for a 2p2c model with and without chemical nonequilibrium
CTwoPTwoCVolumeVariablesImplementation
CTwoPTwoCVolumeVariablesImplementation< Traits, false, useConstraintSolver >	Contains the quantities which are constant within a finite volume in the two-phase two-component model. Specialization for chemical equilibrium
CTwoPTwoCVolumeVariablesImplementation< Traits, true, useConstraintSolver >	Contains the quantities which are constant within a finite volume in the two-phase two-component model. Specialization for chemical non-equilibrium. The equilibrium mole fraction is calculated using Henry's and Raoult's law
CTwoPVolumeVariables	Contains the quantities which are are constant within a finite volume in the two-phase model
CTwoPVolumeVariablesTraits	Traits class for the two-phase model
CUpwindSchemeImpl	Forward declaration of the upwind scheme implementation
CUpwindSchemeImpl< GridGeometry, DiscretizationMethods::CCMpfa >	Upwind scheme for cell-centered mpfa schemes
CUpwindSchemeImpl< GridGeometry, DiscretizationMethods::CCTpfa >	Upwind scheme for the cell-centered tpfa scheme
CUpwindSchemeImpl< GridGeometry, DiscretizationMethods::CVFE< DM > >	Upwind scheme for control-volume finite element methods (uses the standard scheme)
CUzawaBiCGSTABBackend	A Uzawa preconditioned BiCGSTAB solver for saddle-point problems
CVectorCommDataHandle	A data handle class to exchange entries of a vector
CVectorConverter	A helper class that converts a Dune::MultiTypeBlockVector into a plain Dune::BlockVector and transfers back values
CVelocityOutput	Velocity output for implicit (porous media) models
CVertexEnrichmentHelper	Specialization of the enrichment helper class for 2d grids. In this case, we look for two-dimensional bulk grid elements that are enclosed by (lie in between) two 1-dimensional facet grid elements
CVtkGridDataHandle	A data handle for communicating grid data for VTK grids
CVtkOutputModule	A VTK output module to simplify writing dumux simulation data to VTK format
CVtkOutputModuleBase	A VTK output module to simplify writing dumux simulation data to VTK format
CVTKReader	A vtk file reader using tinyxml2 as xml backend
CVTKSequenceWriter	Base class to write pvd-files which contains a list of all collected vtk-files. This is a modified version of DUNE's pvd writer which takes a VTKWriter as template argument making it more general
CWallDistance	Class to calculate the wall distance at every element or vertex of a grid
CZeroEqVolumeVariables	Volume variables for the single-phase 0-Eq. model
►NDune
►NAmg
CConstructionTraits< Dumux::ParMTJac< M, X, Y, l > >
CConstructionTraits< Dumux::ParMTSOR< M, X, Y, l > >
CConstructionTraits< Dumux::ParMTSSOR< M, X, Y, l > >
CSmootherApplier< Dumux::ParMTSOR< M, X, Y, l > >
CBCRSMatrix
CFieldTraits< Dumux::SwitchablePrimaryVariables< PrimaryVariables, StateType > >
CMultiTypeBlockMatrix
CMultiTypeBlockVector
CSPGrid
CSubGrid
CYaspGrid