Contains the quantities which are constant within a coarse-level finite volume in the two-phase VE model. More...

#include <dumux/porousmediumflow/2pve/volumevariables.hh>

Inheritance diagram for Dumux::TwoPVEVolumeVariables< Traits >:

Description

template<class Traits>
class Dumux::TwoPVEVolumeVariables< Traits >

The coarse-level mobilities are the permeability-weighted vertical averages of the reconstructed fine-level mobilities. Permeability [m^2] and dimensionless porosity are column averages; extrusion supplies the column height.

Public Types
using	PrimaryVariables = typename Traits::PrimaryVariables
	Export the type used for the primary variables.
using	FluidSystem = typename Traits::FluidSystem
	Export type of fluid system.
using	FluidState = typename Traits::FluidState
	Export type of fluid state.
using	Indices = typename ModelTraits::Indices
	Export the indices.

Public Member Functions
template<class ElemSol, class Problem, class Element, class Scv>
void	update (const ElemSol &elemSol, const Problem &problem, const Element &element, const Scv &scv)
	Updates all quantities for a given control volume, these volume variables refer to the coarse level of the VE scheme.
template<class ElemSol, class Problem, class Element, class Scv>
void	completeFluidStateCoarse (const ElemSol &elemSol, const Problem &problemCoarse, const Element &element, const Scv &scv, FluidState &fluidState, Scalar temperature, Scalar pcCoarse, Scalar gasPlumeDist)
	Sets complete fluid state. This function is used for the coarse-level elements.
const FluidState &	fluidState () const
	Returns the phase state for the control volume.
Scalar	saturation (int phaseIdx) const
	Returns the saturation of a given phase within the control volume in \([-]\).
Scalar	density (int phaseIdx) const
	Returns the mass density of a given phase within the control volume in \([kg/m^3]\).
Scalar	pressure (int phaseIdx) const
	Returns the effective pressure of a given phase within the control volume in \([kg/(m*s^2)=N/m^2=Pa]\).
Scalar	capillaryPressure () const
	Returns the capillary pressure within the control volume in \([kg/(m*s^2)=N/m^2=Pa]\).
Scalar	temperature () const
	Returns temperature inside the sub-control volume in \([K]\).
Scalar	viscosity (int phaseIdx) const
	Returns the dynamic viscosity of the fluid within the control volume in \(\mathrm{[Pa s]}\).
Scalar	mobility (int phaseIdx) const
	Returns the effective mobility of a given phase within the control volume in \([s*m/kg]\).
Scalar	porosity () const
	Returns the dimensionless column-average porosity.
const PermeabilityType &	permeability () const
	Returns the column-average intrinsic permeability in \([m^2]\).
Scalar	porosityIntegral () const
	Vertical integral of porosity [m].
PermeabilityType	permeabilityIntegral () const
	Vertical integral of permeability [m^3].
int	wettingPhase () const
	Returns the wetting phase index.
Scalar	gasPlumeDist () const
	Returns the gas plume distance within a coarse-level element.
Scalar	columnHeight () const
	Height of the reconstructed column [m].
const PrimaryVariables &	priVars () const
	Returns the vector of primary variables.
Scalar	priVar (const int pvIdx) const
	Returns a component of primary variable vector.
Scalar	extrusionFactor () const
	Returns how much the sub-control volume is extruded.

Static Public Member Functions
static constexpr int	numFluidPhases ()
	Return number of phases considered by the model.
static constexpr int	numFluidComponents ()
	Return number of components considered by the model.

Protected Attributes
FluidState	fluidState_

Member Typedef Documentation

◆ FluidState

template<class Traits>

using Dumux::TwoPVEVolumeVariables< Traits >::FluidState = typename Traits::FluidState

◆ FluidSystem

template<class Traits>

using Dumux::TwoPVEVolumeVariables< Traits >::FluidSystem = typename Traits::FluidSystem

◆ Indices

template<class Traits>

using Dumux::TwoPVEVolumeVariables< Traits >::Indices = typename ModelTraits::Indices

◆ PrimaryVariables

template<class Traits>

using Dumux::TwoPVEVolumeVariables< Traits >::PrimaryVariables = typename Traits::PrimaryVariables

Member Function Documentation

◆ capillaryPressure()

template<class Traits>

Scalar Dumux::TwoPVEVolumeVariables< Traits >::capillaryPressure ( ) const

inline

◆ columnHeight()

template<class Traits>

Scalar Dumux::TwoPVEVolumeVariables< Traits >::columnHeight ( ) const

inline

◆ completeFluidStateCoarse()

template<class Traits>

template<class ElemSol, class Problem, class Element, class Scv>

void Dumux::TwoPVEVolumeVariables< Traits >::completeFluidStateCoarse	(	const ElemSol &	elemSol,
		const Problem &	problemCoarse,
		const Element &	element,
		const Scv &	scv,
		FluidState &	fluidState,
		Scalar	temperature,
		Scalar	pcCoarse,
		Scalar	gasPlumeDist )

inline

Parameters

elemSol	a vector containing all primary variables connected to the element
problemCoarse	the object specifying the coarse-level problem which ought to be simulated
element	an element which contains part of the control volume
scv	the sub-control volume
fluidState	a container with the current (physical) state of the fluid
temperature	prescribed column temperature
pcCoarse	coarsened capillary pressure of coarse-level element
gasPlumeDist	gas plume distance/height belonging to the coarse-level element

Set temperature, saturations, capillary pressures, viscosities, densities.

◆ density()

template<class Traits>

Scalar Dumux::TwoPVEVolumeVariables< Traits >::density ( int phaseIdx ) const

inline

Parameters

phaseIdx the phase index

◆ extrusionFactor()

template<class Traits>

Scalar Dumux::PorousMediumFlowVolumeVariables< Traits >::extrusionFactor ( ) const

inlineinherited

This means the factor by which a lower-dimensional (1D or 2D) entity needs to be expanded to get a full dimensional cell. The default is 1.0 which means that 1D problems are actually thought as pipes with a cross section of 1 m^2 and 2D problems are assumed to extend 1 m to the back.

◆ fluidState()

template<class Traits>

const FluidState & Dumux::TwoPVEVolumeVariables< Traits >::fluidState ( ) const

inline

◆ gasPlumeDist()

template<class Traits>

Scalar Dumux::TwoPVEVolumeVariables< Traits >::gasPlumeDist ( ) const

inline

◆ mobility()

template<class Traits>

Scalar Dumux::TwoPVEVolumeVariables< Traits >::mobility ( int phaseIdx ) const

inline

Parameters

phaseIdx the phase index

◆ numFluidComponents()

template<class Traits>

constexpr int Dumux::PorousMediumFlowVolumeVariables< Traits >::numFluidComponents ( )

inlinestaticconstexprinherited

◆ numFluidPhases()

template<class Traits>

constexpr int Dumux::PorousMediumFlowVolumeVariables< Traits >::numFluidPhases ( )

inlinestaticconstexprinherited

◆ permeability()

template<class Traits>

const PermeabilityType & Dumux::TwoPVEVolumeVariables< Traits >::permeability ( ) const

inline

◆ permeabilityIntegral()

template<class Traits>

PermeabilityType Dumux::TwoPVEVolumeVariables< Traits >::permeabilityIntegral ( ) const

inline

◆ porosity()

template<class Traits>

Scalar Dumux::TwoPVEVolumeVariables< Traits >::porosity ( ) const

inline

◆ porosityIntegral()

template<class Traits>

Scalar Dumux::TwoPVEVolumeVariables< Traits >::porosityIntegral ( ) const

inline

◆ pressure()

template<class Traits>

Scalar Dumux::TwoPVEVolumeVariables< Traits >::pressure ( int phaseIdx ) const

inline

Parameters

phaseIdx the phase index

◆ priVar()

template<class Traits>

Scalar Dumux::PorousMediumFlowVolumeVariables< Traits >::priVar ( const int pvIdx ) const

inlineinherited

Parameters

pvIdx The index of the primary variable of interest

◆ priVars()

template<class Traits>

const PrimaryVariables & Dumux::PorousMediumFlowVolumeVariables< Traits >::priVars ( ) const

inlineinherited

◆ saturation()

template<class Traits>

Scalar Dumux::TwoPVEVolumeVariables< Traits >::saturation ( int phaseIdx ) const

inline

Parameters

phaseIdx the phase index

◆ temperature()

template<class Traits>

Scalar Dumux::TwoPVEVolumeVariables< Traits >::temperature ( ) const

inline

Note that we assume thermodynamic equilibrium, i.e. the temperature of the rock matrix and of all fluid phases are identical.

◆ update()

template<class Traits>

template<class ElemSol, class Problem, class Element, class Scv>

void Dumux::TwoPVEVolumeVariables< Traits >::update	(	const ElemSol &	elemSol,
		const Problem &	problem,
		const Element &	element,
		const Scv &	scv )

inline

Parameters

elemSol	a vector containing all primary variables connected to the element
problem	the object specifying the problem which ought to be simulated
element	an element which contains part of the control volume
scv	the sub control volume

◆ viscosity()

template<class Traits>

Scalar Dumux::TwoPVEVolumeVariables< Traits >::viscosity ( int phaseIdx ) const

inline

Parameters

phaseIdx the phase index

◆ wettingPhase()

template<class Traits>

int Dumux::TwoPVEVolumeVariables< Traits >::wettingPhase ( ) const

inline

Member Data Documentation

◆ fluidState_

template<class Traits>

FluidState Dumux::TwoPVEVolumeVariables< Traits >::fluidState_

protected

The documentation for this class was generated from the following file:

porousmediumflow/2pve/volumevariables.hh

Description

Public Types

Public Member Functions

Static Public Member Functions

Protected Attributes

Member Typedef Documentation

◆ FluidState

◆ FluidSystem

◆ Indices

◆ PrimaryVariables

Member Function Documentation

◆ capillaryPressure()

◆ columnHeight()

◆ completeFluidStateCoarse()

◆ density()

◆ extrusionFactor()

◆ fluidState()

◆ gasPlumeDist()

◆ mobility()

◆ numFluidComponents()

◆ numFluidPhases()

◆ permeability()

◆ permeabilityIntegral()

◆ porosity()

◆ porosityIntegral()

◆ pressure()

◆ priVar()

◆ priVars()

◆ saturation()

◆ temperature()

◆ update()

◆ viscosity()

◆ wettingPhase()

Member Data Documentation

◆ fluidState_