Dumux::Properties Namespace Reference

The energy balance equation for a porous solid. More...

Description

The energy balance is described by the following equation:

\[ \frac{ \partial n c_p \varrho T}{\partial t} - \nabla \cdot \left\lbrace \lambda_\text{pm} \nabla T \right\rbrace = q, \]

where \(n\) is the volume fraction of the conducting material, \(c_p\) its specific heat capacity, \(\varrho\) its density, \(T\) the temperature, and \(\lambda\) the heat conductivity of the porous solid.

Namespaces
namespace	Transition
namespace	TTag
	Type tag for numeric models.

Classes
struct	PointSource< TypeTag, TTag::GridProperties >
	Use the minimal point source implementation as default. More...
struct	PointSourceHelper< TypeTag, TTag::GridProperties >
	Use the point source helper using the bounding box tree as a default. More...
struct	Scalar< TypeTag, TTag::ModelProperties >
	Set the default type of scalar values to double. More...
struct	PrimaryVariables< TypeTag, TTag::ModelProperties >
	Set the default primary variable vector to a vector of size of number of equations. More...
struct	IOFields< TypeTag, TTag::ModelProperties >
	Set the default to an implementation throwing a NotImplemented error. More...
struct	BalanceEqOpts< TypeTag, TTag::ModelProperties >
	Set the default class for the balance equation options. More...
struct	UndefinedProperty
	a tag to mark properties as undefined More...
struct	PropertyAlias
	a tag to specify a direct alias for property extraction More...
struct	DualGridNodalIndexSet< TypeTag, TTag::CCMpfaModel >
	Set the index set type used on the dual grid nodes. More...
struct	PrimaryInteractionVolume< TypeTag, TTag::CCMpfaModel >
	Per default, we use the dynamic mpfa-o interaction volume. More...
struct	SecondaryInteractionVolume< TypeTag, TTag::CCMpfaModel >
	Per default, we use the dynamic mpfa-o interaction volume on boundaries. More...
struct	GridGeometry< TypeTag, TTag::CCMpfaModel >
	Set the default for the grid geometry. More...
struct	GridVolumeVariables< TypeTag, TTag::CCMpfaModel >
	The grid volume variables vector class. More...
struct	GridFluxVariablesCache< TypeTag, TTag::CCMpfaModel >
	The grid volume variables vector class. More...
struct	ElementBoundaryTypes< TypeTag, TTag::CCMpfaModel >
	Set the default for the ElementBoundaryTypes. More...
struct	GridGeometry< TypeTag, TTag::CCTpfaModel >
	Set the default for the grid geometry. More...
struct	GridVolumeVariables< TypeTag, TTag::CCTpfaModel >
	The grid volume variables vector class. More...
struct	GridFluxVariablesCache< TypeTag, TTag::CCTpfaModel >
	The grid flux variables cache vector class. More...
struct	ElementBoundaryTypes< TypeTag, TTag::CCTpfaModel >
	Set the default for the ElementBoundaryTypes. More...
struct	GridGeometry< TypeTag, TTag::FaceCenteredStaggeredModel >
	Set the default for the grid geometry. More...
struct	GridVolumeVariables< TypeTag, TTag::FaceCenteredStaggeredModel >
	The grid volume variables vector class. More...
struct	GridFluxVariablesCache< TypeTag, TTag::FaceCenteredStaggeredModel >
	Set the global flux variables cache vector class. More...
struct	GridVariables< TypeTag, TTag::FaceCenteredStaggeredModel >
	Set the grid variables (volume, flux and face variables). More...
struct	ElementBoundaryTypes< TypeTag, TTag::FaceCenteredStaggeredModel >
	Set the default for the ElementBoundaryTypes. More...
struct	GridVariables< TypeTag, TTag::FiniteVolumeModel >
	The grid variables. More...
struct	EnableGridGeometryCache< TypeTag, TTag::FiniteVolumeModel >
	We do not store the FVGeometry by default. More...
struct	EnableGridVolumeVariablesCache< TypeTag, TTag::FiniteVolumeModel >
	We do not store the volume variables by default. More...
struct	EnableGridFluxVariablesCache< TypeTag, TTag::FiniteVolumeModel >
	disable flux variables data caching by default More...
struct	SolutionVector< TypeTag, TTag::FiniteVolumeModel >
	The type of a solution for the whole grid at a fixed time TODO: move to LinearAlgebra traits. More...
struct	JacobianMatrix< TypeTag, TTag::FiniteVolumeModel >
	Set the type of a global jacobian matrix from the solution types TODO: move to LinearAlgebra traits. More...
struct	GridGeometry< TypeTag, TTag::PQ1FVModel >
	Set the default for the grid geometry. More...
struct	GridVolumeVariables< TypeTag, TTag::PQ1FVModel >
	The grid volume variables vector class. More...
struct	GridFluxVariablesCache< TypeTag, TTag::PQ1FVModel >
	The grid flux variables cache vector class. More...
struct	GridVariables< TypeTag, TTag::PQ1FVModel >
	The grid variables for the volume variables, or for the variables per local dof if the type tag sets Transition::UseVariables. More...
struct	FluxVariablesCache< TypeTag, TTag::PQ1FVModel >
	The flux variables cache type. More...
struct	ElementBoundaryTypes< TypeTag, TTag::PQ1FVModel >
	Set the default for the ElementBoundaryTypes. More...
struct	GridGeometry< TypeTag, TTag::PQ1FEModel >
	Set the default FE grid discretization for PQ1FEModel. More...
struct	GridVariables< TypeTag, TTag::PQ1FEModel >
struct	ElementBoundaryTypes< TypeTag, TTag::PQ1FEModel >
	Set the default for the ElementBoundaryTypes for PQ1FEModel. More...
struct	EnableGridVolumeVariablesCache< TypeTag, TTag::PQ1FEModel >
	TODO: Replace property. More...
struct	SolutionVector< TypeTag, TTag::PQ1FEModel >
	TODO: Replace and move to LinearAlgebra traits. More...
struct	JacobianMatrix< TypeTag, TTag::PQ1FEModel >
	TODO: Replace and move to LinearAlgebra traits. More...
struct	GridGeometry< TypeTag, TTag::PQ1BubbleModel >
	Set the default for the grid geometry. More...
struct	GridGeometry< TypeTag, TTag::PQ1BubbleHybridModel >
	Set the default for the grid geometry for hybrid model. More...
struct	GridGeometry< TypeTag, TTag::PQ1BubbleFEModel >
	Set the default FE grid discretization. More...
struct	GridVariables< TypeTag, TTag::PQ1BubbleFEModel >
struct	EnableGridVolumeVariablesCache< TypeTag, TTag::PQ1BubbleFEModel >
	TODO: Replace property. More...
struct	SolutionVector< TypeTag, TTag::PQ1BubbleFEModel >
	TODO: Replace and move to LinearAlgebra traits. More...
struct	JacobianMatrix< TypeTag, TTag::PQ1BubbleFEModel >
	TODO: Replace and move to LinearAlgebra traits. More...
struct	GridVolumeVariables< TypeTag, TTag::PQ1BubbleFVBase >
	The grid volume variables vector class. More...
struct	GridVariables< TypeTag, TTag::PQ1BubbleFVBase >
	The grid variables for the volume variables, or for the variables per local dof if the type tag sets Transition::UseVariables. More...
struct	FluxVariablesCache< TypeTag, TTag::PQ1BubbleModel >
	The flux variables cache class. More...
struct	GridFluxVariablesCache< TypeTag, TTag::PQ1BubbleModel >
	The grid flux variables cache vector class. More...
struct	GridVariables< TypeTag, TTag::PQ1BubbleHybridModel >
	The grid variables for the hybrid model. More...
struct	EnableGridGeometryCache< TypeTag, TTag::PQ1BubbleHybridModel >
	TODO: Replace property. More...
struct	EnableGridVolumeVariablesCache< TypeTag, TTag::PQ1BubbleHybridModel >
	TODO: Replace property. More...
struct	SolutionVector< TypeTag, TTag::PQ1BubbleHybridModel >
	TODO: Replace and move to LinearAlgebra traits. More...
struct	JacobianMatrix< TypeTag, TTag::PQ1BubbleHybridModel >
	TODO: Replace and move to LinearAlgebra traits. More...
struct	ElementBoundaryTypes< TypeTag, TTag::PQ1BubbleBase >
	Set the default for the ElementBoundaryTypes. More...
struct	GridGeometry< TypeTag, TTag::PQ1NonconformingFVModel >
	Set the default for the grid geometry. More...
struct	GridVolumeVariables< TypeTag, TTag::PQ1NonconformingFVModel >
	The grid volume variables vector class (shared by all FV diamond models). More...
struct	GridFluxVariablesCache< TypeTag, TTag::PQ1NonconformingFVModel >
	Set the global flux variables cache vector class. More...
struct	GridVariables< TypeTag, TTag::PQ1NonconformingFVModel >
	The grid variables for the volume variables, or for the variables per local dof if the type tag sets Transition::UseVariables. More...
struct	FluxVariablesCache< TypeTag, TTag::PQ1NonconformingFVModel >
	The flux variables cache type. More...
struct	ElementBoundaryTypes< TypeTag, TTag::PQ1NonconformingBase >
	Set the default for the ElementBoundaryTypes (shared by FV and FE diamond models). More...
struct	GridGeometry< TypeTag, TTag::PQ1NonconformingFEModel >
	Set the default for the FE grid geometry. More...
struct	GridVariables< TypeTag, TTag::PQ1NonconformingFEModel >
struct	EnableGridVolumeVariablesCache< TypeTag, TTag::PQ1NonconformingFEModel >
	TODO: Replace property. More...
struct	SolutionVector< TypeTag, TTag::PQ1NonconformingFEModel >
	TODO: Replace and move to LinearAlgebra traits. More...
struct	JacobianMatrix< TypeTag, TTag::PQ1NonconformingFEModel >
	TODO: Replace and move to LinearAlgebra traits. More...
struct	GridGeometry< TypeTag, TTag::PQ2HybridModel >
	Set the default for the grid geometry. More...
struct	GridVariables< TypeTag, TTag::PQ2HybridModel >
	The grid variables for the hybrid model. More...
struct	EnableGridGeometryCache< TypeTag, TTag::PQ2HybridModel >
	TODO: Replace property. More...
struct	EnableGridVolumeVariablesCache< TypeTag, TTag::PQ2HybridModel >
	TODO: Replace property. More...
struct	SolutionVector< TypeTag, TTag::PQ2HybridModel >
	TODO: Replace and move to LinearAlgebra traits. More...
struct	JacobianMatrix< TypeTag, TTag::PQ2HybridModel >
	TODO: Replace and move to LinearAlgebra traits. More...
struct	ElementBoundaryTypes< TypeTag, TTag::PQ2Base >
	Set the default for the ElementBoundaryTypes. More...
struct	GridGeometry< TypeTag, TTag::PQ2FEModel >
	Set the default FE grid discretization. More...
struct	GridVariables< TypeTag, TTag::PQ2FEModel >
struct	EnableGridVolumeVariablesCache< TypeTag, TTag::PQ2FEModel >
	TODO: Replace property. More...
struct	SolutionVector< TypeTag, TTag::PQ2FEModel >
	TODO: Replace and move to LinearAlgebra traits. More...
struct	JacobianMatrix< TypeTag, TTag::PQ2FEModel >
	TODO: Replace and move to LinearAlgebra traits. More...
struct	GridGeometry< TypeTag, TTag::PQ3HybridModel >
struct	GridVariables< TypeTag, TTag::PQ3HybridModel >
	The grid variables for the hybrid model. More...
struct	EnableGridGeometryCache< TypeTag, TTag::PQ3HybridModel >
	TODO: Replace property. More...
struct	EnableGridVolumeVariablesCache< TypeTag, TTag::PQ3HybridModel >
	TODO: Replace property. More...
struct	SolutionVector< TypeTag, TTag::PQ3HybridModel >
	TODO: Replace and move to LinearAlgebra traits. More...
struct	JacobianMatrix< TypeTag, TTag::PQ3HybridModel >
	TODO: Replace and move to LinearAlgebra traits. More...
struct	ElementBoundaryTypes< TypeTag, TTag::PQ3Base >
struct	GridGeometry< TypeTag, TTag::PQ3FEModel >
	Set the default FE grid discretization. More...
struct	GridVariables< TypeTag, TTag::PQ3FEModel >
struct	EnableGridVolumeVariablesCache< TypeTag, TTag::PQ3FEModel >
	TODO: Replace property. More...
struct	SolutionVector< TypeTag, TTag::PQ3FEModel >
	TODO: Replace and move to LinearAlgebra traits. More...
struct	JacobianMatrix< TypeTag, TTag::PQ3FEModel >
	TODO: Replace and move to LinearAlgebra traits. More...
struct	ModelTraits< TypeTag, TTag::NavierStokesMassOneP >
struct	FluidState< TypeTag, TTag::NavierStokesMassOneP >
	The fluid state which is used by the volume variables to store the thermodynamic state. This should be chosen appropriately for the model ((non-)isothermal, equilibrium, ...). This can be done in the problem. More...
struct	LocalResidual< TypeTag, TTag::NavierStokesMassOneP >
	The local residual. More...
struct	LocalResidual< TypeTag, TTag::NavierStokesMassOnePFE >
	The local residual of the finite element variant. More...
struct	VolumeVariables< TypeTag, TTag::NavierStokesMassOneP >
	Set the volume variables property. More...
struct	Variables< TypeTag, TTag::NavierStokesMassOneP >
	The variables per local dof. More...
struct	SpatialParams< TypeTag, TTag::NavierStokesMassOnePFE >
struct	VolumeVariables< TypeTag, TTag::NavierStokesMassOnePFE >
	The variables of the finite element variant, which are defined per local dof. More...
struct	FluxVariables< TypeTag, TTag::NavierStokesMassOneP >
	The flux variables. More...
struct	IOFields< TypeTag, TTag::NavierStokesMassOneP >
struct	CouplingManager< TypeTag, TTag::NavierStokesMassOneP >
struct	SpatialParams< TypeTag, TTag::NavierStokesMassOneP >
struct	IOFields< TypeTag, TTag::NavierStokesMassOnePNI >
	Add temperature to the output. More...
struct	ModelTraits< TypeTag, TTag::NavierStokesMassOnePNI >
	The model traits of the non-isothermal model. More...
struct	VolumeVariables< TypeTag, TTag::NavierStokesMassOnePNI >
	Set the volume variables property. More...
struct	ThermalConductivityModel< TypeTag, TTag::NavierStokesMassOnePNI >
	Use the average for effective conductivities. More...
struct	HeatConductionType< TypeTag, TTag::NavierStokesMassOnePNI >
struct	FluxVariables< TypeTag, TTag::NavierStokesMassOnePNI >
	The flux variables. More...
struct	FluxVariablesCache< TypeTag, TTag::NavierStokesMassOnePNI >
struct	FluxVariablesCacheFiller< TypeTag, TTag::NavierStokesMassOnePNI >
struct	SolutionDependentHeatConduction< TypeTag, TTag::NavierStokesMassOnePNI >
struct	BaseModelTraits< TypeTag, TTag::NavierStokesMassOnePNC >
	The base model traits. Per default, we use the number of components of the fluid system.states some specifics of the Navier-Stokes model. More...
struct	ModelTraits< TypeTag, TTag::NavierStokesMassOnePNC >
struct	FluidState< TypeTag, TTag::NavierStokesMassOnePNC >
	The fluid state which is used by the volume variables to store the thermodynamic state. This should be chosen appropriately for the model ((non-)isothermal, equilibrium, ...). This can be done in the problem. More...
struct	LocalResidual< TypeTag, TTag::NavierStokesMassOnePNC >
	The local residual. More...
struct	VolumeVariables< TypeTag, TTag::NavierStokesMassOnePNC >
	Set the volume variables property. More...
struct	MolecularDiffusionType< TypeTag, TTag::NavierStokesMassOnePNC >
	By default, we use fick's law for the diffusive fluxes. More...
struct	EffectiveDiffusivityModel< TypeTag, TTag::NavierStokesMassOnePNC >
	Use the model after Millington (1961) for the effective diffusivity. More...
struct	FluxVariables< TypeTag, TTag::NavierStokesMassOnePNC >
	The flux variables. More...
struct	SolutionDependentMolecularDiffusion< TypeTag, TTag::NavierStokesMassOnePNC >
struct	FluxVariablesCache< TypeTag, TTag::NavierStokesMassOnePNC >
struct	FluxVariablesCacheFiller< TypeTag, TTag::NavierStokesMassOnePNC >
struct	IOFields< TypeTag, TTag::NavierStokesMassOnePNC >
struct	CouplingManager< TypeTag, TTag::NavierStokesMassOnePNC >
struct	SpatialParams< TypeTag, TTag::NavierStokesMassOnePNC >
struct	IOFields< TypeTag, TTag::NavierStokesMassOnePNCNI >
	Add temperature to the output. More...
struct	ModelTraits< TypeTag, TTag::NavierStokesMassOnePNCNI >
	The model traits of the non-isothermal model. More...
struct	VolumeVariables< TypeTag, TTag::NavierStokesMassOnePNCNI >
	Set the volume variables property. More...
struct	ThermalConductivityModel< TypeTag, TTag::NavierStokesMassOnePNCNI >
	Use the average for effective conductivities. More...
struct	HeatConductionType< TypeTag, TTag::NavierStokesMassOnePNCNI >
struct	FluxVariables< TypeTag, TTag::NavierStokesMassOnePNCNI >
	The flux variables. More...
struct	FluxVariablesCache< TypeTag, TTag::NavierStokesMassOnePNCNI >
struct	FluxVariablesCacheFiller< TypeTag, TTag::NavierStokesMassOnePNCNI >
struct	SolutionDependentHeatConduction< TypeTag, TTag::NavierStokesMassOnePNCNI >
struct	ModelTraits< TypeTag, TTag::NavierStokesMomentumCVFEBase >
	< states some specifics of the Navier-Stokes model More...
struct	FluidState< TypeTag, TTag::NavierStokesMomentumCVFEBase >
	The fluid state which is used by the volume variables to store the thermodynamic state. This should be chosen appropriately for the model ((non-)isothermal, equilibrium, ...). This can be done in the problem. More...
struct	LocalResidual< TypeTag, TTag::NavierStokesMomentumCVFE >
	The local residual. More...
struct	LocalResidual< TypeTag, TTag::NavierStokesMomentumFE >
	The local residual. More...
struct	SpatialParams< TypeTag, TTag::NavierStokesMomentumFE >
struct	VolumeVariables< TypeTag, TTag::NavierStokesMomentumCVFEBase >
	Set the volume variables property. More...
struct	Variables< TypeTag, TTag::NavierStokesMomentumCVFEBase >
	The variables per local dof. More...
struct	CouplingManager< TypeTag, TTag::NavierStokesMomentumCVFEBase >
struct	NormalizePressure< TypeTag, TTag::NavierStokesMomentum >
	Normalize the pressure term in the momentum balance by default. More...
struct	ModelTraits< TypeTag, TTag::NavierStokesMomentum >
struct	FluidState< TypeTag, TTag::NavierStokesMomentum >
	The fluid state which is used by the volume variables to store the thermodynamic state. This should be chosen appropriately for the model ((non-)isothermal, equilibrium, ...). This can be done in the problem. More...
struct	LocalResidual< TypeTag, TTag::NavierStokesMomentum >
	The local residual. More...
struct	VolumeVariables< TypeTag, TTag::NavierStokesMomentum >
	Set the volume variables property. More...
struct	FluxVariables< TypeTag, TTag::NavierStokesMomentum >
	The flux variables. More...
struct	PointSource< TypeTag, TTag::NavierStokesMomentum >
	The point source. More...
struct	CouplingManager< TypeTag, TTag::NavierStokesMomentum >
struct	HeatConductionType< TypeTag, TTag::FreeFlow >
	Use Fourier's Law as default heat conduction type. More...
struct	SpatialParams< TypeTag, TTag::FreeFlow >
struct	ModelTraits< TypeTag, TTag::ShallowWater >
struct	LocalResidual< TypeTag, TTag::ShallowWater >
struct	FluxVariables< TypeTag, TTag::ShallowWater >
struct	VolumeVariables< TypeTag, TTag::ShallowWater >
struct	IOFields< TypeTag, TTag::ShallowWater >
struct	AdvectionType< TypeTag, TTag::ShallowWater >
struct	ViscousFluxType< TypeTag, TTag::ShallowWater >
struct	FluidSystem< TypeTag, TTag::ShallowWater >
struct	Scalar< TypeTag, Dumux::Detail::HelmholtzOperator::TTag< P > >
	Set the default type of scalar values to double. More...
struct	PrimaryVariables< TypeTag, Dumux::Detail::HelmholtzOperator::TTag< P > >
	Set the default primary variable vector to a vector of size of number of equations. More...
struct	ModelTraits< TypeTag, Dumux::Detail::HelmholtzOperator::TTag< P > >
struct	LocalResidual< TypeTag, Dumux::Detail::HelmholtzOperator::TTag< P > >
struct	Problem< TypeTag, Dumux::Detail::HelmholtzOperator::TTag< P > >
struct	VolumeVariables< TypeTag, Dumux::Detail::HelmholtzOperator::TTag< P > >
struct	EnableGridVolumeVariablesCache< TypeTag, Dumux::Detail::HelmholtzOperator::TTag< P > >
struct	EnableGridFluxVariablesCache< TypeTag, Dumux::Detail::HelmholtzOperator::TTag< P > >
struct	EnableGridGeometryCache< TypeTag, Dumux::Detail::HelmholtzOperator::TTag< P > >
struct	Grid< TypeTag, Dumux::Detail::HelmholtzOperator::TTag< P > >
struct	AdvectionType< TypeTag, TTag::BoxFacetCouplingModel >
	Use the box facet coupling-specific Darcy's law. More...
struct	MolecularDiffusionType< TypeTag, TTag::BoxFacetCouplingModel >
	Use the box facet coupling-specific Ficks's law. More...
struct	HeatConductionType< TypeTag, TTag::BoxFacetCouplingModel >
	Use the box facet coupling-specific Fourier's law. More...
struct	FluxVariables< TypeTag, TTag::BoxFacetCouplingModel >
	Per default, use the porous medium flow flux variables with the modified upwind scheme. More...
struct	GridGeometry< TypeTag, TTag::BoxFacetCouplingModel >
	Set the default for the grid finite volume geometry. More...
struct	PrimaryInteractionVolume< TypeTag, TTag::CCMpfaFacetCouplingModel >
	Use the facet coupling-specific mpfa-o interaction volume. More...
struct	SecondaryInteractionVolume< TypeTag, TTag::CCMpfaFacetCouplingModel >
	Use the facet coupling-specific mpfa-o interaction volume. More...
struct	FluxVariables< TypeTag, TTag::CCMpfaFacetCouplingModel >
	Per default, use the porous medium flow flux variables with the modified upwind scheme. More...
struct	AdvectionType< TypeTag, TTag::CCTpfaFacetCouplingModel >
	Use the tpfa facet coupling-specific Darcy's law. More...
struct	MolecularDiffusionType< TypeTag, TTag::CCTpfaFacetCouplingModel >
	Use the tpfa facet coupling-specific Ficks's law. More...
struct	HeatConductionType< TypeTag, TTag::CCTpfaFacetCouplingModel >
	Use the tpfa facet coupling-specific Ficks's law. More...
struct	FluxVariables< TypeTag, TTag::CCTpfaFacetCouplingModel >
	Per default, use the porous medium flow flux variables with the modified upwind scheme. More...
struct	VolumeVariables< TypeTag, TTag::PNMOneP >
	Set the volume variables property. More...
struct	SpatialParams< TypeTag, TTag::PNMOneP >
struct	FluxVariablesCache< TypeTag, TTag::PoreNetworkModel >
	The flux variables cache. More...
struct	IOFields< TypeTag, TTag::PNMOneP >
	Default I/O fields specific to this model. More...
struct	AdvectionType< TypeTag, TTag::PNMOneP >
	The advection type. More...
struct	VolumeVariables< TypeTag, TTag::PNMOnePNI >
	Set the volume variables property. More...
struct	IOFields< TypeTag, TTag::PNMOnePNI >
	Add temperature to the output. More...
struct	ModelTraits< TypeTag, TTag::PNMOnePNI >
	The model traits of the non-isothermal model. More...
struct	ThermalConductivityModel< TypeTag, TTag::PNMOnePNI >
	Use the average for effective conductivities. More...
struct	SpatialParams< TypeTag, TTag::PNMOnePNC >
struct	AdvectionType< TypeTag, TTag::PNMOnePNC >
	The advection type. More...
struct	ReplaceCompEqIdx< TypeTag, TTag::PNMOnePNC >
	Set as default that no component mass balance is replaced by the total mass balance. More...
struct	MolecularDiffusionType< TypeTag, TTag::PNMOnePNC >
	We use fick's law as the default for the diffusive fluxes. More...
struct	VolumeVariables< TypeTag, TTag::PNMOnePNC >
	Set the volume variables propertySet the vtk output fields specific to this model. More...
struct	IOFields< TypeTag, TTag::PNMOnePNC >
struct	UseMoles< TypeTag, TTag::PNMOnePNC >
struct	ModelTraits< TypeTag, TTag::PNMOnePNCNI >
	model traits of the non-isothermal model. More...
struct	VolumeVariables< TypeTag, TTag::PNMOnePNCNI >
struct	IOFields< TypeTag, TTag::PNMOnePNCNI >
struct	ThermalConductivityModel< TypeTag, TTag::PNMOnePNCNI >
	Use the average for effective conductivities. More...
struct	VolumeVariables< TypeTag, TTag::PNMTwoP >
	Set the volume variables property. More...
struct	FluxVariablesCache< TypeTag, TTag::PNMTwoP >
	The flux variables cache. More...
struct	GridFluxVariablesCache< TypeTag, TTag::PNMTwoP >
	The grid flux variables cache vector class. More...
struct	SpatialParams< TypeTag, TTag::PNMTwoP >
struct	AdvectionType< TypeTag, TTag::PNMTwoP >
	The advection type. More...
struct	EnergyLocalResidual< TypeTag, TTag::PNMTwoP >
struct	IOFields< TypeTag, TTag::PNMTwoP >
struct	ModelTraits< TypeTag, TTag::PNMTwoPNI >
	model traits of the non-isothermal model. More...
struct	VolumeVariables< TypeTag, TTag::PNMTwoPNI >
	Set the volume variables property. More...
struct	IOFields< TypeTag, TTag::PNMTwoPNI >
	Set the vtk output fields specific to the non-isothermal two-phase model. More...
struct	ThermalConductivityModel< TypeTag, TTag::PNMTwoPNI >
	Use the average for effective conductivities. More...
struct	VolumeVariables< TypeTag, TTag::PNMTwoPNC >
	Set the volume variables property. More...
struct	PrimaryVariables< TypeTag, TTag::PNMTwoPNC >
	The primary variables vector for the 2pnc model. More...
struct	SpatialParams< TypeTag, TTag::PNMTwoPNC >
struct	AdvectionType< TypeTag, TTag::PNMTwoPNC >
	The advection type. More...
struct	IOFields< TypeTag, TTag::PNMTwoPNC >
struct	GridFluxVariablesCache< TypeTag, TTag::PNMTwoPNC >
	The grid flux variables cache vector class. More...
struct	FluxVariablesCache< TypeTag, TTag::PNMTwoPNC >
	The flux variables cache. More...
struct	MolecularDiffusionType< TypeTag, TTag::PNMTwoPNC >
	We use fick's law as the default for the diffusive fluxes. More...
struct	ModelTraits< TypeTag, TTag::PNMTwoPNCNI >
	The model traits of the non-isothermal model. More...
struct	VolumeVariables< TypeTag, TTag::PNMTwoPNCNI >
	Set the volume variables property. More...
struct	IOFields< TypeTag, TTag::PNMTwoPNCNI >
	Set non-isothermal output fields. More...
struct	ThermalConductivityModel< TypeTag, TTag::PNMTwoPNCNI >
struct	Labels
	The pore/throat labels. More...
struct	GridGeometry< TypeTag, TTag::PoreNetworkModel >
	Set the default for the grid geometry. More...
struct	HeatConductionType< TypeTag, TTag::PoreNetworkModel >
struct	Labels< TypeTag, TTag::PoreNetworkModel >
	The labels. More...
struct	VelocityOutput< TypeTag, TTag::PoreNetworkModel >
struct	EnableThermalNonEquilibrium< TypeTag, TTag::PoreNetworkModel >
struct	VolumeVariables< TypeTag, TTag::PNMSolidEnergy >
	Set the volume variables property. More...
struct	HeatConductionType< TypeTag, TTag::PNMSolidEnergy >
struct	SpatialParams< TypeTag, TTag::PNMSolidEnergy >
struct	FluxVariablesCache< TypeTag, TTag::PNMSolidEnergy >
	The flux variables cache. More...
struct	IOFields< TypeTag, TTag::PNMSolidEnergy >
	Set the vtk output fields specific to this model. More...
struct	LocalResidual< TypeTag, TTag::PoroElastic >
	Use the local residual of the poro-elastic model. More...
struct	IOFields< TypeTag, TTag::PoroElastic >
	default vtk output fields specific to this model More...
struct	ModelTraits< TypeTag, TTag::PoroElastic >
	The default model traits of the poro-elastic model. More...
struct	VolumeVariables< TypeTag, TTag::PoroElastic >
	Set the volume variables property. More...
struct	StressType< TypeTag, TTag::PoroElastic >
	Per default, we use effective stresses on the basis of Hooke's Law. More...
struct	ModelTraits< TypeTag, TTag::PoroElasticLargeDefMomentumModel >
struct	LocalResidual< TypeTag, TTag::PoroElasticLargeDefMomentumModel >
struct	Variables< TypeTag, TTag::PoroElasticLargeDefMomentumModel >
struct	VolumeVariables< TypeTag, TTag::PoroElasticLargeDefMomentumModel >
	Code asking for the volume variables gets the variables per local dof. More...
struct	GridVariables< TypeTag, TTag::PoroElasticLargeDefMomentumModel >
	The grid variables, with the cache selected depending on the discretization scheme. More...
struct	ModelTraits< TypeTag, TTag::PoroElasticLargeDefSolidPressureModel >
struct	LocalResidual< TypeTag, TTag::PoroElasticLargeDefSolidPressureModel >
struct	Variables< TypeTag, TTag::PoroElasticLargeDefSolidPressureModel >
struct	VolumeVariables< TypeTag, TTag::PoroElasticLargeDefSolidPressureModel >
	Code asking for the volume variables gets the variables per local dof. More...
struct	GridVariables< TypeTag, TTag::PoroElasticLargeDefSolidPressureModel >
	The grid variables, with the cache selected depending on the discretization scheme. More...
struct	ModelTraits< TypeTag, TTag::PoroElasticLargeDefFluidPressureModel >
struct	LocalResidual< TypeTag, TTag::PoroElasticLargeDefFluidPressureModel >
struct	Variables< TypeTag, TTag::PoroElasticLargeDefFluidPressureModel >
struct	VolumeVariables< TypeTag, TTag::PoroElasticLargeDefFluidPressureModel >
	Code asking for the volume variables gets the variables per local dof. More...
struct	GridVariables< TypeTag, TTag::PoroElasticLargeDefFluidPressureModel >
	The grid variables, with the cache selected depending on the discretization scheme. More...
struct	IOFields< TypeTag, TTag::OneP >
struct	LocalResidual< TypeTag, TTag::OneP >
	the local residual function, at the integration points of the scheme for the variables per local dof More...
struct	BaseModelTraits< TypeTag, TTag::OneP >
	states some specifics of the one-phase model More...
struct	ModelTraits< TypeTag, TTag::OneP >
	default the actually used traits to the base traits More...
struct	VolumeVariables< TypeTag, TTag::OneP >
	Set the volume variables property. More...
struct	Variables< TypeTag, TTag::OneP >
	The variables per local dof. More...
struct	AdvectionType< TypeTag, TTag::OneP >
	Darcy's law, at the integration points of the scheme for the variables per local dof. More...
struct	FluidState< TypeTag, TTag::OneP >
	The fluid state which is used by the volume variables to store the thermodynamic state. More...
struct	IOFields< TypeTag, TTag::OnePNI >
	Add temperature to the output. More...
struct	ModelTraits< TypeTag, TTag::OnePNI >
	The model traits of the non-isothermal model. More...
struct	VolumeVariables< TypeTag, TTag::OnePNI >
	Set the volume variables property. More...
struct	ThermalConductivityModel< TypeTag, TTag::OnePNI >
	Use the average for effective conductivities. More...
struct	ReplaceCompEqIdx< TypeTag, TTag::OnePNC >
	Set as default that no component mass balance is replaced by the total mass balance. More...
struct	BaseModelTraits< TypeTag, TTag::OnePNC >
	The base model traits. Per default, we use the number of components of the fluid system. More...
struct	ModelTraits< TypeTag, TTag::OnePNC >
	default the actually used traits to the base traits More...
struct	FluidState< TypeTag, TTag::OnePNC >
	The fluid state which is used by the volume variables to store the thermodynamic state. More...
struct	EffectiveDiffusivityModel< TypeTag, TTag::OnePNC >
	Use the model after Millington (1961) for the effective diffusivity. More...
struct	UseMoles< TypeTag, TTag::OnePNC >
	Use mole fractions in the balance equations by default. More...
struct	LocalResidual< TypeTag, TTag::OnePNC >
	The local residual function. More...
struct	VolumeVariables< TypeTag, TTag::OnePNC >
	Set the volume variables property. More...
struct	IOFields< TypeTag, TTag::OnePNC >
	Set the vtk output fields specific to this model. More...
struct	IOFields< TypeTag, TTag::OnePNCNI >
	The non-isothermal vtk output fields. More...
struct	ThermalConductivityModel< TypeTag, TTag::OnePNCNI >
	Use the average for effective conductivities. More...
struct	ModelTraits< TypeTag, TTag::OnePNCNI >
	Model traits of the non-isothermal model. More...
struct	VolumeVariables< TypeTag, TTag::OnePNCNI >
struct	EquilibriumLocalResidual< TypeTag, TTag::OnePNCNonEquil >
struct	EquilibriumIOFields< TypeTag, TTag::OnePNCNonEquil >
	Set the vtk output fields specific to this model. More...
struct	ModelTraits< TypeTag, TTag::OnePNCNonEquil >
struct	EnableChemicalNonEquilibrium< TypeTag, TTag::OnePNCNonEquil >
struct	EquilibriumModelTraits< TypeTag, TTag::OnePNCNonEquil >
	Set equilibrium model traits. More...
struct	ThermalConductivityModel< TypeTag, TTag::OnePNCNonEquil >
	In case we do not assume full non-equilibrium one needs a thermal conductivity. More...
struct	VolumeVariables< TypeTag, TTag::OnePNCNonEquil >
	Use the mineralization volume variables together with the 2pnc vol vars. More...
struct	VolumeVariables< TypeTag, TTag::OnePNCMin >
	use the mineralization volume variables together with the 1pnc vol vars More...
struct	LocalResidual< TypeTag, TTag::OnePNCMin >
struct	ModelTraits< TypeTag, TTag::OnePNCMin >
	Use non-mineralization model traits with 1pnc traits. More...
struct	SolidState< TypeTag, TTag::OnePNCMin >
	The two-phase model uses the immiscible fluid state. More...
struct	IOFields< TypeTag, TTag::OnePNCMin >
	Use the mineralization vtk output fields. More...
struct	IOFields< TypeTag, TTag::OnePNCMinNI >
	Non-isothermal vtk output. More...
struct	ModelTraits< TypeTag, TTag::OnePNCMinNI >
	The non-isothermal model traits. More...
struct	VolumeVariables< TypeTag, TTag::OnePNCMinNI >
	use the mineralization volume variables together with the 1pnc vol vars More...
struct	ThermalConductivityModel< TypeTag, TTag::OnePNCMinNI >
	Use the average for effective conductivities. More...
struct	Formulation< TypeTag, TTag::TwoP >
	< Set the default formulation to pwsn More...
struct	LocalResidual< TypeTag, TTag::TwoP >
	Use the immiscible local residual operator for the 2p model. More...
struct	BaseModelTraits< TypeTag, TTag::TwoP >
	The base model traits class. More...
struct	ModelTraits< TypeTag, TTag::TwoP >
	default the actually used traits to the base traits More...
struct	IOFields< TypeTag, TTag::TwoP >
	Set the vtk output fields specific to the twop model. More...
struct	VolumeVariables< TypeTag, TTag::TwoP >
	Set the volume variables property. More...
struct	FluidState< TypeTag, TTag::TwoP >
	The two-phase model uses the immiscible fluid state. More...
struct	ModelTraits< TypeTag, TTag::TwoPNI >
	The non-isothermal model traits class. More...
struct	VolumeVariables< TypeTag, TTag::TwoPNI >
	Set the volume variables property. More...
struct	IOFields< TypeTag, TTag::TwoPNI >
	Set the vtk output fields specific to the non-isothermal twop model. More...
struct	ThermalConductivityModel< TypeTag, TTag::TwoPNI >
	Somerton is used as default model to compute the effective thermal heat conductivity. More...
struct	UseBlockingOfSpuriousFlow
	Determines whether blocking of spurious flow is used or not. More...
struct	FluidState< TypeTag, TTag::TwoPOneCNI >
	The fluid state which is used by the volume variables to store the thermodynamic state. This should be chosen appropriately for the model ((non-)isothermal, equilibrium, ...). This can be done in the problem. More...
struct	Formulation< TypeTag, TTag::TwoPOneCNI >
	Set the default formulation to pw-sn. More...
struct	UseBlockingOfSpuriousFlow< TypeTag, TTag::TwoPOneCNI >
	Do not block spurious flows by default. More...
struct	LocalResidual< TypeTag, TTag::TwoPOneCNI >
	The specific local residual (i.e. balance equations). More...
struct	AdvectionType< TypeTag, TTag::TwoPOneCNI >
	Use a modified version of Darcy's law which allows for blocking of spurious flows. More...
struct	VolumeVariables< TypeTag, TTag::TwoPOneCNI >
	Set the volume variables property. More...
struct	PrimaryVariables< TypeTag, TTag::TwoPOneCNI >
	The primary variables vector for the 2p1cni model. More...
struct	ThermalConductivityModel< TypeTag, TTag::TwoPOneCNI >
	Somerton is used as default model to compute the effective thermal heat conductivity. More...
struct	ModelTraits< TypeTag, TTag::TwoPOneCNI >
	Set the non-isothermal model traits. More...
struct	IOFields< TypeTag, TTag::TwoPOneCNI >
	The non-isothermal vtk output fields. More...
struct	BaseModelTraits< TypeTag, TTag::TwoPTwoC >
	Set the model traits property. More...
struct	ModelTraits< TypeTag, TTag::TwoPTwoC >
struct	VolumeVariables< TypeTag, TTag::TwoPTwoC >
	Use the 2p2c VolumeVariables. More...
struct	UseConstraintSolver< TypeTag, TTag::TwoPTwoC >
	Determines whether the constraint solver is used. More...
struct	ModelTraits< TypeTag, TTag::TwoPTwoCNI >
	Set the non-isothermal model traits. More...
struct	VolumeVariables< TypeTag, TTag::TwoPTwoCNI >
	Set the volume variables property. More...
struct	IOFields< TypeTag, TTag::TwoPTwoCNI >
	Set non-isothermal output fields. More...
struct	ThermalConductivityModel< TypeTag, TTag::TwoPTwoCNI >
	Somerton is used as default model to compute the effective thermal heat conductivity. More...
struct	EquilibriumLocalResidual< TypeTag, TTag::TwoPTwoCNonEquil >
struct	EquilibriumIOFields< TypeTag, TTag::TwoPTwoCNonEquil >
	Set the vtk output fields specific to this model. More...
struct	ModelTraits< TypeTag, TTag::TwoPTwoCNonEquil >
struct	EquilibriumModelTraits< TypeTag, TTag::TwoPTwoCNonEquil >
	Set equilibrium model traits. More...
struct	ThermalConductivityModel< TypeTag, TTag::TwoPTwoCNonEquil >
struct	VolumeVariables< TypeTag, TTag::TwoPTwoCNonEquil >
	Use the nonequilibrium volume variables together with the 2p2c vol vars. More...
struct	ModelTraits< TypeTag, TTag::TwoPTwoCNINonEquil >
	Set the non-isothermal model traits with the nonequilibrium model traits as isothermal traits. More...
struct	EquilibriumIOFields< TypeTag, TTag::TwoPTwoCNINonEquil >
	Set the equilibrium IO fields which are in that case the nonisothermal io fields. More...
struct	VolumeVariables< TypeTag, TTag::TwoPTwoCNINonEquil >
	Use the nonequilibrium volume variables together with the 2p2c vol vars. More...
struct	ThermalConductivityModel< TypeTag, TTag::TwoPTwoCNINonEquil >
	Somerton is used as default model to compute the effective thermal heat conductivity. More...
struct	PrimaryVariables< TypeTag, TTag::TwoPNC >
	The primary variables vector for the 2pnc model. More...
struct	VolumeVariables< TypeTag, TTag::TwoPNC >
	Set the volume variables property. More...
struct	BaseModelTraits< TypeTag, TTag::TwoPNC >
	Set the base model traits. More...
struct	ModelTraits< TypeTag, TTag::TwoPNC >
	default the actually used traits to the base traits More...
struct	IOFields< TypeTag, TTag::TwoPNC >
	Set the vtk output fields specific to this model. More...
struct	LocalResidual< TypeTag, TTag::TwoPNC >
	Use the compositional local residual. More...
struct	ReplaceCompEqIdx< TypeTag, TTag::TwoPNC >
	Per default, no component mass balance is replaced. More...
struct	Formulation< TypeTag, TTag::TwoPNC >
	Default formulation is pw-Sn, overwrite if necessary. More...
struct	SetMoleFractionsForFirstPhase< TypeTag, TTag::TwoPNC >
	Set the primary variables mole fractions for the wetting or nonwetting phase. More...
struct	UseMoles< TypeTag, TTag::TwoPNC >
	Use mole fractions in the balance equations by default. More...
struct	EffectiveDiffusivityModel< TypeTag, TTag::TwoPNC >
	Use the model after Millington (1961) for the effective diffusivity. More...
struct	FluidState< TypeTag, TTag::TwoPNC >
	This model uses the compositional fluid state. More...
struct	ModelTraits< TypeTag, TTag::TwoPNCNI >
	Set the non-isothermal model traits. More...
struct	VolumeVariables< TypeTag, TTag::TwoPNCNI >
	Set the volume variables property. More...
struct	IOFields< TypeTag, TTag::TwoPNCNI >
	Set non-isothermal output fields. More...
struct	ThermalConductivityModel< TypeTag, TTag::TwoPNCNI >
	Somerton is used as default model to compute the effective thermal heat conductivity. More...
struct	LocalResidual< TypeTag, TTag::TwoPNCMin >
struct	VolumeVariables< TypeTag, TTag::TwoPNCMin >
	use the mineralization volume variables together with the 2pnc vol vars More...
struct	IOFields< TypeTag, TTag::TwoPNCMin >
	Set the vtk output fields specific to this model. More...
struct	ModelTraits< TypeTag, TTag::TwoPNCMin >
	The 2pnc model traits define the non-mineralization part. More...
struct	SolidState< TypeTag, TTag::TwoPNCMin >
	The two-phase model uses the immiscible fluid state. More...
struct	ModelTraits< TypeTag, TTag::TwoPNCMinNI >
	Set non-isothermal model traits. More...
struct	VolumeVariables< TypeTag, TTag::TwoPNCMinNI >
	Set the volume variables property. More...
struct	IOFields< TypeTag, TTag::TwoPNCMinNI >
	Non-isothermal vtkoutput. More...
struct	ThermalConductivityModel< TypeTag, TTag::TwoPNCMinNI >
	Use the effective thermal conductivities calculated using the Somerton method. More...
struct	FineGrid
	Full-dimensional grid used only for the vertical reconstruction. More...
struct	FineGridGeometry
	Finite-volume geometry of the reconstruction grid. More...
struct	VolumeVariables< TypeTag, TTag::TwoPVE >
	Set the VE volume variables. More...
struct	ModelTraits< TypeTag, TTag::ThreeP >
	Set the model traits. More...
struct	LocalResidual< TypeTag, TTag::ThreeP >
	The local residual function of the conservation equations. More...
struct	VolumeVariables< TypeTag, TTag::ThreeP >
	Set the volume variables property. More...
struct	FluidState< TypeTag, TTag::ThreeP >
	The fluid state which is used by the volume variables to store the thermodynamic state. More...
struct	IOFields< TypeTag, TTag::ThreeP >
	Set the vtk output fields specific to this model. More...
struct	ThermalConductivityModel< TypeTag, TTag::ThreePNI >
	Somerton is used as default model to compute the effective thermal heat conductivity. More...
struct	IOFields< TypeTag, TTag::ThreePNI >
	Set non-isothermal output fields. More...
struct	ModelTraits< TypeTag, TTag::ThreePNI >
	Set non-isothermal model traits. More...
struct	VolumeVariables< TypeTag, TTag::ThreePNI >
	Set the volume variables property. More...
struct	BaseModelTraits< TypeTag, TTag::ThreePThreeC >
	Set the model traits. More...
struct	ModelTraits< TypeTag, TTag::ThreePThreeC >
struct	UseConstraintSolver< TypeTag, TTag::ThreePThreeC >
	Determines whether a constraint solver should be used explicitly. More...
struct	ReplaceCompEqIdx< TypeTag, TTag::ThreePThreeC >
	Set as default that no component mass balance is replaced by the total mass balance. More...
struct	FluidState< TypeTag, TTag::ThreePThreeC >
	The fluid state which is used by the volume variables to store the thermodynamic state. This should be chosen appropriately for the model ((non-)isothermal, equilibrium, ...). This can be done in the problem. More...
struct	LocalResidual< TypeTag, TTag::ThreePThreeC >
	The local residual function of the conservation equations. More...
struct	PrimaryVariables< TypeTag, TTag::ThreePThreeC >
	The primary variables vector for the 3p3c model. More...
struct	VolumeVariables< TypeTag, TTag::ThreePThreeC >
	Set the volume variables property. More...
struct	EffectiveDiffusivityModel< TypeTag, TTag::ThreePThreeC >
	The model after Millington (1961) is used for the effective diffusivity. More...
struct	IOFields< TypeTag, TTag::ThreePThreeC >
	Set the vtk output fields specific to this model. More...
struct	UseMoles< TypeTag, TTag::ThreePThreeC >
	Use mole fractions in the balance equations by default. More...
struct	ModelTraits< TypeTag, TTag::ThreePThreeCNI >
	Set non-isothermal NumEq. More...
struct	VolumeVariables< TypeTag, TTag::ThreePThreeCNI >
	Set the volume variables property. More...
struct	IOFields< TypeTag, TTag::ThreePThreeCNI >
	Set the non-isothermal vktoutputfields. More...
struct	ThermalConductivityModel< TypeTag, TTag::ThreePThreeCNI >
	Somerton is used as default model to compute the effective thermal heat conductivity. More...
struct	ModelTraits< TypeTag, TTag::ThreePWaterOilNI >
	Set the non-isothermal model traits property. More...
struct	FluidState< TypeTag, TTag::ThreePWaterOilNI >
	The fluid state which is used by the volume variables to store the thermodynamic state. This should be chosen appropriately for the model ((non-)isothermal, equilibrium, ...). This can be done in the problem. More...
struct	LocalResidual< TypeTag, TTag::ThreePWaterOilNI >
	The local residual function of the conservation equations. More...
struct	ReplaceCompEqIdx< TypeTag, TTag::ThreePWaterOilNI >
	Set as default that no component mass balance is replaced by the total mass balance. More...
struct	PrimaryVariables< TypeTag, TTag::ThreePWaterOilNI >
	The primary variables vector for the 3p water oil non-isothermal model. More...
struct	OnlyGasPhaseCanDisappear< TypeTag, TTag::ThreePWaterOilNI >
	Determines whether a constraint solver should be used explicitly. More...
struct	VolumeVariables< TypeTag, TTag::ThreePWaterOilNI >
	Set the volume variables property. More...
struct	EffectiveDiffusivityModel< TypeTag, TTag::ThreePWaterOilNI >
	Use the model after Millington (1961) for the effective diffusivity. More...
struct	UseMoles< TypeTag, TTag::ThreePWaterOilNI >
struct	ThermalConductivityModel< TypeTag, TTag::ThreePWaterOilNI >
	Somerton is used as default model to compute the effective thermal heat conductivity. More...
struct	IOFields< TypeTag, TTag::ThreePWaterOilNI >
	Set the non-isothermal vkt output fields. More...
struct	GridGeometry< TypeTag, TTag::BoxDfmModel >
	Set the default for the grid geometry. More...
struct	FluxVariablesCache< TypeTag, TTag::BoxDfmModel >
	The flux variables cache class specific to box-dfm porous medium flow models. More...
struct	VolumeVariables< TypeTag, TTag::TwoPTwoCCO2 >
	the co2 volume variables use the same traits as the 2p2c model More...
struct	VolumeVariables< TypeTag, TTag::TwoPTwoCCO2NI >
struct	LocalResidual< TypeTag, TTag::MPNC >
	Use the MpNc local residual for the MpNc model. More...
struct	ModelTraits< TypeTag, TTag::MPNC >
	Set the model traits property. More...
struct	FluidState< TypeTag, TTag::MPNC >
	This model uses the compositional fluid state. More...
struct	VolumeVariables< TypeTag, TTag::MPNC >
	Set the volume variables property. More...
struct	ReplaceCompEqIdx< TypeTag, TTag::MPNC >
	Per default, no component mass balance is replaced. More...
struct	UseMoles< TypeTag, TTag::MPNC >
	Use mole fractions in the balance equations by default. More...
struct	EffectiveDiffusivityModel< TypeTag, TTag::MPNC >
	Use the model after Millington (1961) for the effective diffusivity. More...
struct	PressureFormulation< TypeTag, TTag::MPNC >
	Set the default pressure formulation to the pressure of the (most) wetting phase. More...
struct	IOFields< TypeTag, TTag::MPNC >
	Set the vtk output fields specific to this model. More...
struct	ModelTraits< TypeTag, TTag::MPNCNI >
	set the non-isothermal model traits More...
struct	VolumeVariables< TypeTag, TTag::MPNCNI >
	Set the volume variables property. More...
struct	ThermalConductivityModel< TypeTag, TTag::MPNCNI >
	Somerton is used as default model to compute the effective thermal heat conductivity. More...
struct	EquilibriumLocalResidual< TypeTag, TTag::MPNCNonequil >
struct	EquilibriumIOFields< TypeTag, TTag::MPNCNonequil >
	Set the vtk output fields specific to this model. More...
struct	ModelTraits< TypeTag, TTag::MPNCNonequil >
struct	EquilibriumModelTraits< TypeTag, TTag::MPNCNonequil >
	set equilibrium model traits More...
struct	ThermalConductivityModel< TypeTag, TTag::MPNCNonequil >
	in case we do not assume full non-equilibrium one needs a thermal conductivity More...
struct	VolumeVariables< TypeTag, TTag::MPNCNonequil >
	use the mineralization volume variables together with the 2pnc vol vars More...
struct	ModelTraits< TypeTag, TTag::NonEquilibrium >
	Set the model traits. More...
struct	EnableThermalNonEquilibrium< TypeTag, TTag::NonEquilibrium >
	Per default, we consider both thermal and chemical non-equilibrium. More...
struct	EnableChemicalNonEquilibrium< TypeTag, TTag::NonEquilibrium >
struct	NumEnergyEqSolid< TypeTag, TTag::NonEquilibrium >
	Default values for the number of energy balance equations. More...
struct	NumEnergyEqFluid< TypeTag, TTag::NonEquilibrium >
struct	EnergyLocalResidual< TypeTag, TTag::NonEquilibrium >
struct	LocalResidual< TypeTag, TTag::NonEquilibrium >
struct	HeatConductionType< TypeTag, TTag::NonEquilibrium >
struct	FluidState< TypeTag, TTag::NonEquilibrium >
struct	GridVariables< TypeTag, TTag::NonEquilibrium >
	The grid variables. More...
struct	IOFields< TypeTag, TTag::NonEquilibrium >
	indices for non-isothermal models More...
struct	NusseltFormulation< TypeTag, TTag::NonEquilibrium >
struct	SherwoodFormulation< TypeTag, TTag::NonEquilibrium >
	Set the default formulation for the sherwood correlation Other possible parametrizations can be found in the dimensionlessnumbers. More...
struct	FluxVariables< TypeTag, TTag::PorousMediumFlow >
	The flux variables for models involving flow in porous media. More...
struct	FluxVariablesCache< TypeTag, TTag::PorousMediumFlow >
	The flux variables cache class for models involving flow in porous media. More...
struct	FluxVariablesCacheFiller< TypeTag, TTag::PorousMediumFlow >
struct	AdvectionType< TypeTag, TTag::PorousMediumFlow >
	By default, we use darcy's law for the advective fluxes. More...
struct	MolecularDiffusionType< TypeTag, TTag::PorousMediumFlow >
	By default, we use fick's law for the diffusive fluxes. More...
struct	EnableCompositionalDispersion< TypeTag, TTag::PorousMediumFlow >
	Per default, we do not include compositional dispersion effects. More...
struct	EnableThermalDispersion< TypeTag, TTag::PorousMediumFlow >
	Per default, we do not include thermal dispersion effects. More...
struct	DispersionFluxType< TypeTag, TTag::PorousMediumFlow >
	By default, we use a diffusive flux for the dispersive fluxes. More...
struct	CompositionalDispersionModel< TypeTag, TTag::PorousMediumFlow >
	By default, we use Scheideggers's law for the dispersive tensor calculation. More...
struct	ThermalDispersionModel< TypeTag, TTag::PorousMediumFlow >
	By default, we use the same dispersion tensor type as the componsitonal dispersion for the thermal disperion tensor. More...
struct	HeatConductionType< TypeTag, TTag::PorousMediumFlow >
	By default, we use fourier's law as the default for heat conduction fluxes. More...
struct	SolutionDependentAdvection< TypeTag, TTag::PorousMediumFlow >
	By default, parameters are solution-dependent. More...
struct	SolutionDependentMolecularDiffusion< TypeTag, TTag::PorousMediumFlow >
struct	SolutionDependentHeatConduction< TypeTag, TTag::PorousMediumFlow >
struct	EnergyLocalResidual< TypeTag, TTag::PorousMediumFlow >
	The default implementation of the energy balance equation for flow problems in porous media. More...
struct	VelocityOutput< TypeTag, TTag::PorousMediumFlow >
	Velocity output. More...
struct	EnableThermalNonEquilibrium< TypeTag, TTag::PorousMediumFlow >
struct	EnableBoxInterfaceSolver< TypeTag, TTag::PorousMediumFlow >
	Per default, we disable the box interface solver. More...
struct	SolidState< TypeTag, TTag::PorousMediumFlow >
	per default solid state is inert More...
struct	SolidSystem< TypeTag, TTag::PorousMediumFlow >
struct	LocalResidual< TypeTag, TTag::Richards >
	The local residual operator. More...
struct	IOFields< TypeTag, TTag::Richards >
	Set the vtk output fields specific to this model. More...
struct	VelocityOutput< TypeTag, TTag::Richards >
struct	ModelTraits< TypeTag, TTag::Richards >
	The model traits. More...
struct	VolumeVariables< TypeTag, TTag::Richards >
	Set the volume variables property. More...
struct	EffectiveDiffusivityModel< TypeTag, TTag::Richards >
	Use the model after Millington (1961) for the effective diffusivity. More...
struct	FluidSystem< TypeTag, TTag::Richards >
	The fluid system used by the model. More...
struct	FluidState< TypeTag, TTag::Richards >
	The fluid state which is used by the volume variables to store the thermodynamic state. This should be chosen appropriately for the model ((non-)isothermal, equilibrium, ...). This can be done in the problem. More...
struct	BalanceEqOpts< TypeTag, TTag::Richards >
	Set a richards specific class for the balance equation options. More...
struct	ThermalConductivityModel< TypeTag, TTag::RichardsNI >
	Somerton is used as default model to compute the effective thermal heat conductivity. More...
struct	ModelTraits< TypeTag, TTag::RichardsNI >
	set non-isothermal model traits More...
struct	IOFields< TypeTag, TTag::RichardsNI >
	Set the vtk output fields specific to th non-isothermal model. More...
struct	VolumeVariables< TypeTag, TTag::RichardsNI >
	Set the volume variables property. More...
struct	LocalResidual< TypeTag, TTag::ExtendedRichards >
	The local residual operator. More...
struct	IOFields< TypeTag, TTag::ExtendedRichards >
	Set the vtk output fields specific to this model. More...
struct	ModelTraits< TypeTag, TTag::ExtendedRichards >
	The model traits. More...
struct	VolumeVariables< TypeTag, TTag::ExtendedRichards >
	Set the volume variables property. More...
struct	EffectiveDiffusivityModel< TypeTag, TTag::ExtendedRichards >
	Use the model after Millington (1961) for the effective diffusivity. More...
struct	PrimaryVariables< TypeTag, TTag::ExtendedRichards >
	The primary variables vector for the richards model. More...
struct	ModelTraits< TypeTag, TTag::ExtendedRichardsNI >
	set non-isothermal model traits More...
struct	IOFields< TypeTag, TTag::ExtendedRichardsNI >
	Set the vtk output fields specific to th non-isothermal model. More...
struct	VolumeVariables< TypeTag, TTag::ExtendedRichardsNI >
	Set the volume variables property. More...
struct	ThermalConductivityModel< TypeTag, TTag::ExtendedRichardsNI >
	Somerton is used as default model to compute the effective thermal heat conductivity. More...
struct	BaseModelTraits< TypeTag, TTag::RichardsNC >
	Set the model traits class. More...
struct	ModelTraits< TypeTag, TTag::RichardsNC >
struct	UseMoles< TypeTag, TTag::RichardsNC >
	Define that per default mole fractions are used in the balance equations. More...
struct	LocalResidual< TypeTag, TTag::RichardsNC >
	Use the dedicated local residual. More...
struct	ReplaceCompEqIdx< TypeTag, TTag::RichardsNC >
struct	VolumeVariables< TypeTag, TTag::RichardsNC >
	Set the volume variables property. More...
struct	FluidSystem< TypeTag, TTag::RichardsNC >
	The fluid system used by the model. More...
struct	FluidState< TypeTag, TTag::RichardsNC >
	The fluid state which is used by the volume variables to store the thermodynamic state. This should be chosen appropriately for the model ((non-)isothermal, equilibrium, ...). This can be done in the problem. More...
struct	IOFields< TypeTag, TTag::RichardsNC >
	Set the vtk output fields specific to this model. More...
struct	EffectiveDiffusivityModel< TypeTag, TTag::RichardsNC >
	The model after Millington (1961) is used for the effective diffusivity. More...
struct	ThermalConductivityModel< TypeTag, TTag::RichardsNCNI >
	average is used as default model to compute the effective thermal heat conductivity More...
struct	ModelTraits< TypeTag, TTag::RichardsNCNI >
	set non-isothermal model traits More...
struct	VolumeVariables< TypeTag, TTag::RichardsNCNI >
	Set the volume variables property. More...
struct	ModelTraits< TypeTag, TTag::SolidEnergy >
	set the model traits More...
struct	LocalResidual< TypeTag, TTag::SolidEnergy >
	set the local residual More...
struct	IOFields< TypeTag, TTag::SolidEnergy >
	Set the vtk output fields specific to this model. More...
struct	VolumeVariables< TypeTag, TTag::SolidEnergy >
	Set the volume variables property. More...
struct	ThermalConductivityModel< TypeTag, TTag::SolidEnergy >
	Use the average for effective conductivities. More...
struct	UseMoles< TypeTag, TTag::Tracer >
	Define that mole fractions are used in the balance equations. More...
struct	ModelTraits< TypeTag, TTag::Tracer >
	set the model traits More...
struct	LocalResidual< TypeTag, TTag::Tracer >
	Use the tracer local residual function for the tracer model. More...
struct	IOFields< TypeTag, TTag::Tracer >
	Set the vtk output fields specific to this model. More...
struct	VolumeVariables< TypeTag, TTag::Tracer >
	Set the volume variables property. More...
struct	AdvectionType< TypeTag, TTag::Tracer >
	We use darcy's law as the default for the advective fluxes. More...
struct	EffectiveDiffusivityModel< TypeTag, TTag::Tracer >
	Use simple model with constant tortuosity as pm diffusivity model. More...
struct	LocalResidual< TypeTag, TTag::Elastic >
	Use the local residual of the elastic model. More...
struct	ModelTraits< TypeTag, TTag::Elastic >
	The model traits of the elastic model. More...
struct	VolumeVariables< TypeTag, TTag::Elastic >
	Set the volume variables property. More...
struct	Variables< TypeTag, TTag::Elastic >
	The variables per local dof. More...
struct	StressType< TypeTag, TTag::Elastic >
	By default, we use hooke's law for stress evaluations. More...
struct	FluxVariablesCache< TypeTag, TTag::Elastic >
	The flux variables cache class for models involving flow in porous media. More...
struct	SolidState< TypeTag, TTag::Elastic >
	The solid state must be inert. More...
struct	SolidSystem< TypeTag, TTag::Elastic >
	Per default we use one constant component in the inert solid system. More...
struct	ModelTraits< TypeTag, TTag::Hyperelastic >
struct	LocalResidual< TypeTag, TTag::Hyperelastic >
struct	Variables< TypeTag, TTag::Hyperelastic >
struct	VolumeVariables< TypeTag, TTag::Hyperelastic >
	Code asking for the volume variables gets the variables per local dof. More...
struct	GridVariables< TypeTag, TTag::Hyperelastic >
	The general grid variables, with the cache selected depending on the discretization scheme. More...
struct	SpatialParams< TypeTag, TTag::Hyperelastic >
struct	ModelTraits< TypeTag, TTag::HyperelasticVolIsoMomentumModel >
struct	LocalResidual< TypeTag, TTag::HyperelasticVolIsoMomentumModel >
struct	Variables< TypeTag, TTag::HyperelasticVolIsoMomentumModel >
struct	VolumeVariables< TypeTag, TTag::HyperelasticVolIsoMomentumModel >
	Code asking for the volume variables gets the variables per local dof. More...
struct	GridVariables< TypeTag, TTag::HyperelasticVolIsoMomentumModel >
	The grid variables, with the cache selected depending on the discretization scheme. More...
struct	ModelTraits< TypeTag, TTag::HyperelasticVolIsoPressureModel >
struct	LocalResidual< TypeTag, TTag::HyperelasticVolIsoPressureModel >
struct	Variables< TypeTag, TTag::HyperelasticVolIsoPressureModel >
struct	VolumeVariables< TypeTag, TTag::HyperelasticVolIsoPressureModel >
	Code asking for the volume variables gets the variables per local dof. More...
struct	GridVariables< TypeTag, TTag::HyperelasticVolIsoPressureModel >
	The grid variables, with the cache selected depending on the discretization scheme. More...
struct	ModelTraits< TypeTag, TTag::KirchhoffLovePlateDeformation >
struct	LocalResidual< TypeTag, TTag::KirchhoffLovePlateDeformation >
struct	VolumeVariables< TypeTag, TTag::KirchhoffLovePlateDeformation >
	Set the volume variables property. More...
struct	ModelTraits< TypeTag, TTag::KirchhoffLovePlateRotation >
struct	LocalResidual< TypeTag, TTag::KirchhoffLovePlateRotation >
struct	VolumeVariables< TypeTag, TTag::KirchhoffLovePlateRotation >
	Set the volume variables property. More...
struct	ModelTraits< TypeTag, TTag::MembranePlate >
struct	LocalResidual< TypeTag, TTag::MembranePlate >
struct	VolumeVariables< TypeTag, TTag::MembranePlate >
struct	SpatialParams< TypeTag, TTag::MembranePlate >
struct	ModelTraits< TypeTag, TTag::MindlinReissnerPlateDeformation >
struct	LocalResidual< TypeTag, TTag::MindlinReissnerPlateDeformation >
struct	VolumeVariables< TypeTag, TTag::MindlinReissnerPlateDeformation >
	Set the volume variables property. More...
struct	ModelTraits< TypeTag, TTag::MindlinReissnerPlateRotation >
struct	LocalResidual< TypeTag, TTag::MindlinReissnerPlateRotation >
struct	VolumeVariables< TypeTag, TTag::MindlinReissnerPlateRotation >
	Set the volume variables property. More...

Functions
template<class TypeTag, template< class, class > class Property>
constexpr bool	hasDefinedType ()
	whether the property is defined/specialized for TypeTag
template<class ParentTypeTag, class TypeTag>
constexpr bool	inheritsFrom ()
	Return true if the given type tag inherits from the given parent type tag.