 |
3.2-git
DUNE for Multi-{Phase, Component, Scale, Physics, ...} flow and transport in porous media
|
Loading...
Searching...
No Matches
| |
3.2-git
DUNE for Multi-{Phase, Component, Scale, Physics, ...} flow and transport in porous media
|
Namespaces | |
| namespace | TTag |
| Type tag for numeric models. | |
| namespace | Detail |
| implementation details for template meta programming | |
Classes | |
| struct | Scalar |
| Property to specify the type of scalar values. More... | |
| struct | ModelDefaultParameters |
| Property which defines the group that is queried for parameters by default. More... | |
| struct | Grid |
| The DUNE grid type. More... | |
| struct | PrimaryVariables |
| A vector of primary variables. More... | |
| struct | NumEqVector |
| A vector of size number equations that can be used for Neumann fluxes, sources, residuals, ... More... | |
| struct | GridView |
| The type of the grid view according to the grid type. More... | |
| struct | ModelTraits |
| Traits class encapsulating model specifications. More... | |
| struct | BaseModelTraits |
| Model traits to be used as a base for nonisothermal, mineralization ... models. More... | |
| struct | Problem |
| Property to specify the type of a problem which has to be solved. More... | |
| struct | PointSource |
| Property defining the type of point source used. More... | |
| struct | PointSourceHelper |
| Property defining the class that computes which sub control volume point sources belong to. More... | |
| struct | IOFields |
| A class helping models to define input and output fields. More... | |
| struct | BaseLocalResidual |
| The type of the base class of the local residual (specific to a discretization scheme). More... | |
| struct | JacobianMatrix |
| Type of the global jacobian matrix. More... | |
| struct | SolutionVector |
| Vector containing all primary variable vector of the grid. More... | |
| struct | BoundaryTypes |
| Stores the boundary types of a single degree of freedom. More... | |
| struct | LocalResidual |
| struct | LinearSolver |
| TODO: Remove this property as soon as the decoupled models are integrated. More... | |
| struct | UseMoles |
| Property whether to use moles or kg as amount unit for balance equations. More... | |
| struct | ReplaceCompEqIdx |
| The component balance index that should be replaced by the total mass/mole balance. More... | |
| struct | BalanceEqOpts |
| A class that collects options for the evaluation of the balance equations. More... | |
| struct | ElementBoundaryTypes |
| Stores the boundary types on an element. More... | |
| struct | GridGeometry |
| struct | EnableGridGeometryCache |
| struct | VolumeVariables |
| The secondary variables within a sub-control volume. More... | |
| struct | GridVolumeVariables |
| The type for a global container for the volume variables. More... | |
| struct | EnableGridVolumeVariablesCache |
| If disabled, the volume variables are not stored (reduces memory, but is slower). More... | |
| struct | FluxVariables |
| Container storing the different types of flux variables. More... | |
| struct | FluxVariablesCache |
| Stores data associated with flux vars. More... | |
| struct | FluxVariablesCacheFiller |
| The engine behind the global flux cache (how to fill caches for the stencil). More... | |
| struct | GridFluxVariablesCache |
| The global vector of flux variable containers. More... | |
| struct | EnableGridFluxVariablesCache |
| specifies if data on flux vars should be saved (faster, but more memory consuming) More... | |
| struct | GridVariables |
| The grid variables object managing variable data on the grid (volvars/fluxvars cache). More... | |
| struct | PrimaryInteractionVolume |
| The primary interaction volume type. More... | |
| struct | SecondaryInteractionVolume |
| The secondary interaction volume type used e.g. on the boundaries. More... | |
| struct | DualGridNodalIndexSet |
| The type used for the nodal index sets of the dual grid. More... | |
| struct | EnergyLocalResidual |
| The local residual of the energy equation. More... | |
| struct | AdvectionType |
| The type for the calculation the advective fluxes. More... | |
| struct | SolutionDependentAdvection |
| specifies if the parameters for the advective fluxes depend on the solution More... | |
| struct | MolecularDiffusionType |
| The type for the calculation of the molecular diffusion fluxes. More... | |
| struct | SolutionDependentMolecularDiffusion |
| specifies if the parameters for the diffusive fluxes depend on the solution More... | |
| struct | HeatConductionType |
| The type for the calculation of the heat conduction fluxes. More... | |
| struct | SolutionDependentHeatConduction |
| specifies if the parameters for the heat conduction fluxes depend on the solution More... | |
| struct | SpatialParams |
| The type of the spatial parameters object. More... | |
| struct | FluidSystem |
| The type of the fluid system to use. More... | |
| struct | FluidState |
| The type of the fluid state to use. More... | |
| struct | SolidSystem |
| The type of the solid system to use. More... | |
| struct | SolidState |
| The type of the solid state to use. More... | |
| struct | EffectiveDiffusivityModel |
| The employed model for the computation of the effective diffusivity. More... | |
| struct | ThermalConductivityModel |
| Model to be used for the calculation of the effective conductivity. More... | |
| struct | VelocityOutput |
| specifies the velocity calculation module to be used More... | |
| struct | Formulation |
| The formulation of the model. More... | |
| struct | UseConstraintSolver |
| Whether to use a contraint solver for computing the secondary variables. More... | |
| struct | EnableBoxInterfaceSolver |
| struct | Chemistry |
| The chemistry class with which solves equlibrium reactions. More... | |
| struct | SetMoleFractionsForFirstPhase |
| Set the mole fraction in the wetting or non-wetting phase. More... | |
| struct | EnableWaterDiffusionInAir |
| Property for turning Richards into extended Richards. More... | |
| struct | OnlyGasPhaseCanDisappear |
| reduces the phasestates to threePhases and wnPhaseOnly More... | |
| struct | StressType |
| The type used for the evaluation of stress tensors and forces. More... | |
| struct | NumEqCellCenter |
| The number of equations for cell-centered dofs. More... | |
| struct | NumEqFace |
| The number of equations for face dofs. More... | |
| struct | CellCenterSolutionVector |
| The solution vector type for cell-centered dofs. More... | |
| struct | FaceSolutionVector |
| The solution vector type for face dofs. More... | |
| struct | GridFaceVariables |
| Global vector containing face-related data. More... | |
| struct | CellCenterPrimaryVariables |
| The primary variables container type for cell-centered dofs. More... | |
| struct | FacePrimaryVariables |
| The primary variables container type for face dofs. More... | |
| struct | IntersectionMapper |
| Specifies the intersection mapper. More... | |
| struct | StaggeredPrimaryVariables |
| The hybrid primary variables container type. More... | |
| struct | BaseEpsilon |
| A base epsilon for numerical differentiation, can contain multiple values. More... | |
| struct | FaceVariables |
| Class containing local face-related data. More... | |
| struct | BoundaryValues |
| Class containing local boundary data. More... | |
| struct | StaggeredFaceSolution |
| A vector containing the solution for a face (similar to ElementSolution). More... | |
| struct | EnableGridFaceVariablesCache |
| Switch on/off caching of face variables. More... | |
| struct | UpwindSchemeOrder |
| Specifies the order of the upwinding scheme (1 == first order, 2 == second order(tvd methods)). More... | |
| struct | PressureFormulation |
| struct | EquilibriumModelTraits |
| the formulation of the pressure e.g most wetting first More... | |
| struct | EquilibriumLocalResidual |
| struct | EquilibriumIndices |
| struct | EquilibriumIOFields |
| struct | NumEqBalance |
| struct | EnableThermalNonEquilibrium |
| struct | EnableChemicalNonEquilibrium |
| struct | NumEnergyEqFluid |
| struct | NumEnergyEqSolid |
| struct | NusseltFormulation |
| struct | SherwoodFormulation |
| struct | NormalizePressure |
| Returns whether to normalize the pressure term in the momentum balance or not. More... | |
| struct | CouplingManager |
| struct | TimeManager |
| struct | GridView< TypeTag, TTag::GridProperties > |
| Use the leaf grid view if not defined otherwise. More... | |
| struct | PointSource< TypeTag, TTag::GridProperties > |
| Use the minimal point source implementation as default. More... | |
| struct | PointSourceHelper< TypeTag, TTag::GridProperties > |
| Use the point source helper using the bounding box tree as a default. More... | |
| struct | Scalar< TypeTag, TTag::ModelProperties > |
| Set the default type of scalar values to double. More... | |
| struct | NumEqVector< TypeTag, TTag::ModelProperties > |
| Set the default vector with size number of equations to a field vector. More... | |
| struct | PrimaryVariables< TypeTag, TTag::ModelProperties > |
| Set the default primary variable vector to a vector of size of number of equations. More... | |
| struct | ModelDefaultParameters< TypeTag, TTag::ModelProperties > |
| do not specific any model-specific default parameters here More... | |
| struct | IOFields< TypeTag, TTag::ModelProperties > |
| Set the default to an implementation throwing a NotImplemented error. More... | |
| struct | BalanceEqOpts< TypeTag, TTag::ModelProperties > |
| Set the default class for the balance equation options. More... | |
| struct | UndefinedProperty |
| a tag to mark properties as undefined More... | |
| struct | ReverseTupleImpl |
| struct | ReverseTupleImpl< Tuple, std::index_sequence< I... > > |
| struct | GridGeometry< TypeTag, TTag::BoxModel > |
| Set the default for the grid geometry. More... | |
| struct | GridVolumeVariables< TypeTag, TTag::BoxModel > |
| The grid volume variables vector class. More... | |
| struct | GridFluxVariablesCache< TypeTag, TTag::BoxModel > |
| The grid flux variables cache vector class. More... | |
| struct | ElementBoundaryTypes< TypeTag, TTag::BoxModel > |
| Set the default for the ElementBoundaryTypes. More... | |
| struct | BaseLocalResidual< TypeTag, TTag::BoxModel > |
| Set the BaseLocalResidual to BoxLocalResidual. More... | |
| struct | DualGridNodalIndexSet< TypeTag, TTag::CCMpfaModel > |
| Set the index set type used on the dual grid nodes. More... | |
| struct | PrimaryInteractionVolume< TypeTag, TTag::CCMpfaModel > |
| Per default, we use the dynamic mpfa-o interaction volume. More... | |
| struct | SecondaryInteractionVolume< TypeTag, TTag::CCMpfaModel > |
| Per default, we use the dynamic mpfa-o interaction volume on boundaries. More... | |
| struct | GridGeometry< TypeTag, TTag::CCMpfaModel > |
| Set the default for the grid geometry. More... | |
| struct | GridVolumeVariables< TypeTag, TTag::CCMpfaModel > |
| The grid volume variables vector class. More... | |
| struct | GridFluxVariablesCache< TypeTag, TTag::CCMpfaModel > |
| The grid volume variables vector class. More... | |
| struct | ElementBoundaryTypes< TypeTag, TTag::CCMpfaModel > |
| Set the default for the ElementBoundaryTypes. More... | |
| struct | BaseLocalResidual< TypeTag, TTag::CCMpfaModel > |
| Set the BaseLocalResidual to CCLocalResidual. More... | |
| struct | GridGeometry< TypeTag, TTag::CCTpfaModel > |
| Set the default for the grid geometry. More... | |
| struct | GridVolumeVariables< TypeTag, TTag::CCTpfaModel > |
| The grid volume variables vector class. More... | |
| struct | GridFluxVariablesCache< TypeTag, TTag::CCTpfaModel > |
| The grid flux variables cache vector class. More... | |
| struct | ElementBoundaryTypes< TypeTag, TTag::CCTpfaModel > |
| Set the default for the ElementBoundaryTypes. More... | |
| struct | BaseLocalResidual< TypeTag, TTag::CCTpfaModel > |
| Set the BaseLocalResidual to CCLocalResidual. More... | |
| struct | GridVariables< TypeTag, TTag::FiniteVolumeModel > |
| The grid variables. More... | |
| struct | EnableGridGeometryCache< TypeTag, TTag::FiniteVolumeModel > |
| We do not store the FVGeometry by default. More... | |
| struct | EnableGridVolumeVariablesCache< TypeTag, TTag::FiniteVolumeModel > |
| We do not store the volume variables by default. More... | |
| struct | EnableGridFluxVariablesCache< TypeTag, TTag::FiniteVolumeModel > |
| disable flux variables data caching by default More... | |
| struct | BoundaryTypes< TypeTag, TTag::FiniteVolumeModel > |
| Boundary types at a single degree of freedom. More... | |
| struct | SolutionVector< TypeTag, TTag::FiniteVolumeModel > |
| The type of a solution for the whole grid at a fixed time TODO: move to LinearAlgebra traits. More... | |
| struct | JacobianMatrix< TypeTag, TTag::FiniteVolumeModel > |
| Set the type of a global jacobian matrix from the solution types TODO: move to LinearAlgebra traits. More... | |
| struct | GridFaceVariables< TypeTag, TTag::StaggeredModel > |
| Set the default global face variables cache vector class. More... | |
| struct | EnableGridFaceVariablesCache< TypeTag, TTag::StaggeredModel > |
| Cache the face variables per default. More... | |
| struct | GridFluxVariablesCache< TypeTag, TTag::StaggeredModel > |
| Set the global flux variables cache vector class. More... | |
| struct | StaggeredFaceSolution< TypeTag, TTag::StaggeredModel > |
| Set the face solution type. More... | |
| struct | GridVariables< TypeTag, TTag::StaggeredModel > |
| Set the grid variables (volume, flux and face variables). More... | |
| struct | ElementBoundaryTypes< TypeTag, TTag::StaggeredModel > |
| Use the cell center element boundary types per default. More... | |
| struct | BaseLocalResidual< TypeTag, TTag::StaggeredModel > |
| Set the BaseLocalResidual to StaggeredLocalResidual. More... | |
| struct | CellCenterPrimaryVariables< TypeTag, TTag::StaggeredModel > |
| The cell center primary variables. More... | |
| struct | FacePrimaryVariables< TypeTag, TTag::StaggeredModel > |
| The face primary variables. More... | |
| struct | BoundaryTypes< TypeTag, TTag::StaggeredModel > |
| Boundary types at a single degree of freedom. More... | |
| struct | CellCenterSolutionVector< TypeTag, TTag::StaggeredModel > |
| The type of a solution for the whole grid at a fixed time TODO: move to LinearAlgebra traits. More... | |
| struct | FaceSolutionVector< TypeTag, TTag::StaggeredModel > |
| The type of a solution for the whole grid at a fixed time TODO: move to LinearAlgebra traits. More... | |
| struct | SolutionVector< TypeTag, TTag::StaggeredModel > |
| default property value for the solution vector only used for monolithic solver TODO: move to LinearAlgebra traits More... | |
| struct | JacobianMatrix< TypeTag, TTag::StaggeredModel > |
| Set the type of a global jacobian matrix from the solution types TODO: move to LinearAlgebra traits. More... | |
| struct | NumEqFace< TypeTag, TTag::StaggeredFreeFlowModel > |
| Set the number of equations on the faces to 1. We only consider scalar values because the velocity vector is normal to the face. More... | |
| struct | NumEqCellCenter< TypeTag, TTag::StaggeredFreeFlowModel > |
| For free flow models, we take the number of "physical" equations (e.g. 4 for a 3D NavierStokes problem, 3 velocity components and pressure) and substract the number of dimensions. This yields the number of equations to be solved on the cell centers. Works also for non-isothermal models. More... | |
| struct | GridGeometry< TypeTag, TTag::StaggeredFreeFlowModel > |
| The default grid geometry. More... | |
| struct | FaceVariables< TypeTag, TTag::StaggeredFreeFlowModel > |
| The variables living on the faces. More... | |
| struct | GridVolumeVariables< TypeTag, TTag::StaggeredFreeFlowModel > |
| Set the default global volume variables cache vector class. More... | |
| struct | BoundaryTypes< TypeTag, TTag::StaggeredFreeFlowModel > |
| Boundary types at a single degree of freedom. More... | |
| struct | VelocityOutput< TypeTag, TTag::StaggeredFreeFlowModel > |
| The velocity output. More... | |
| struct | UpwindSchemeOrder< TypeTag, TTag::StaggeredFreeFlowModel > |
| Set the order of the upwinding scheme to 1 by default. More... | |
| struct | KEpsilonNCModelTraits |
| Traits for the low-Reynolds k-epsilon multi-component modelstates some specifics of the isothermal multi-component low-Reynolds k-epsilon model. More... | |
| struct | ModelTraits< TypeTag, TTag::KEpsilonNC > |
| struct | VolumeVariables< TypeTag, TTag::KEpsilonNC > |
| Set the volume variables property. More... | |
| struct | LocalResidual< TypeTag, TTag::KEpsilonNC > |
| The local residual. More... | |
| struct | FluxVariables< TypeTag, TTag::KEpsilonNC > |
| The flux variables. More... | |
| struct | IOFields< TypeTag, TTag::KEpsilonNC > |
| The specific I/O fields. More... | |
| struct | ModelTraits< TypeTag, TTag::KEpsilonNCNI > |
| The model traits of the non-isothermal model. More... | |
| struct | VolumeVariables< TypeTag, TTag::KEpsilonNCNI > |
| Set the volume variables property. More... | |
| struct | LocalResidual< TypeTag, TTag::KEpsilonNCNI > |
| The local residual. More... | |
| struct | FluxVariables< TypeTag, TTag::KEpsilonNCNI > |
| The flux variables. More... | |
| struct | IOFields< TypeTag, TTag::KEpsilonNCNI > |
| The specific I/O fields. More... | |
| struct | KOmegaNCModelTraits |
| Traits for the k-omega multi-component modelstates some specifics of the isothermal multi-component k-omega model. More... | |
| struct | ModelTraits< TypeTag, TTag::KOmegaNC > |
| struct | VolumeVariables< TypeTag, TTag::KOmegaNC > |
| Set the volume variables property. More... | |
| struct | LocalResidual< TypeTag, TTag::KOmegaNC > |
| The local residual. More... | |
| struct | FluxVariables< TypeTag, TTag::KOmegaNC > |
| The flux variables. More... | |
| struct | IOFields< TypeTag, TTag::KOmegaNC > |
| The specific I/O fields. More... | |
| struct | ModelTraits< TypeTag, TTag::KOmegaNCNI > |
| The model traits of the non-isothermal model. More... | |
| struct | VolumeVariables< TypeTag, TTag::KOmegaNCNI > |
| Set the volume variables property. More... | |
| struct | LocalResidual< TypeTag, TTag::KOmegaNCNI > |
| The local residual. More... | |
| struct | FluxVariables< TypeTag, TTag::KOmegaNCNI > |
| The flux variables. More... | |
| struct | IOFields< TypeTag, TTag::KOmegaNCNI > |
| The specific I/O fields. More... | |
| struct | LowReKEpsilonNCModelTraits |
| Traits for the low-Reynolds k-epsilon multi-component modelstates some specifics of the isothermal multi-component low-Reynolds k-epsilon model. More... | |
| struct | ModelTraits< TypeTag, TTag::LowReKEpsilonNC > |
| struct | VolumeVariables< TypeTag, TTag::LowReKEpsilonNC > |
| Set the volume variables property. More... | |
| struct | LocalResidual< TypeTag, TTag::LowReKEpsilonNC > |
| The local residual. More... | |
| struct | FluxVariables< TypeTag, TTag::LowReKEpsilonNC > |
| The flux variables. More... | |
| struct | IOFields< TypeTag, TTag::LowReKEpsilonNC > |
| The specific I/O fields. More... | |
| struct | ModelTraits< TypeTag, TTag::LowReKEpsilonNCNI > |
| The model traits of the non-isothermal model. More... | |
| struct | VolumeVariables< TypeTag, TTag::LowReKEpsilonNCNI > |
| Set the volume variables property. More... | |
| struct | LocalResidual< TypeTag, TTag::LowReKEpsilonNCNI > |
| The local residual. More... | |
| struct | FluxVariables< TypeTag, TTag::LowReKEpsilonNCNI > |
| The flux variables. More... | |
| struct | IOFields< TypeTag, TTag::LowReKEpsilonNCNI > |
| The specific I/O fields. More... | |
| struct | ModelTraits< TypeTag, TTag::NavierStokesNC > |
| < states some specifics of the free-flow model More... | |
| struct | UseMoles< TypeTag, TTag::NavierStokesNC > |
| Defines whether molar (true) or mass (false) density is used. More... | |
| struct | ReplaceCompEqIdx< TypeTag, TTag::NavierStokesNC > |
| struct | NormalizePressure< TypeTag, TTag::NavierStokesNC > |
| Normalize the pressure term in the momentum balance by default. More... | |
| struct | LocalResidual< TypeTag, TTag::NavierStokesNC > |
| The local residual. More... | |
| struct | MolecularDiffusionType< TypeTag, TTag::NavierStokesNC > |
| Use Fick's law for molecular diffusion per default. More... | |
| struct | VolumeVariables< TypeTag, TTag::NavierStokesNC > |
| Set the volume variables property. More... | |
| struct | FluxVariables< TypeTag, TTag::NavierStokesNC > |
| The flux variables. More... | |
| struct | IOFields< TypeTag, TTag::NavierStokesNC > |
| The specific I/O fields. More... | |
| struct | FluidState< TypeTag, TTag::NavierStokesNC > |
| The fluid state which is used by the volume variables to store the thermodynamic state. This should be chosen appropriately for the model ((non-)isothermal, equilibrium, ...). This can be done in the problem. More... | |
| struct | ModelTraits< TypeTag, TTag::NavierStokesNCNI > |
| The model traits of the non-isothermal model. More... | |
| struct | IOFields< TypeTag, TTag::NavierStokesNCNI > |
| The non-isothermal I/O fields. More... | |
| struct | HeatConductionType< TypeTag, TTag::NavierStokesNCNI > |
| Use Fourier's Law as default heat conduction type. More... | |
| struct | OneEqNCModelTraits |
| Traits for the one-equation multi-component modelstates some specifics of the isothermal multi-component one-equation model. More... | |
| struct | ModelTraits< TypeTag, TTag::OneEqNC > |
| struct | VolumeVariables< TypeTag, TTag::OneEqNC > |
| Set the volume variables property. More... | |
| struct | LocalResidual< TypeTag, TTag::OneEqNC > |
| The local residual. More... | |
| struct | FluxVariables< TypeTag, TTag::OneEqNC > |
| The flux variables. More... | |
| struct | IOFields< TypeTag, TTag::OneEqNC > |
| The specific I/O fields. More... | |
| struct | ModelTraits< TypeTag, TTag::OneEqNCNI > |
| The model traits of the non-isothermal model. More... | |
| struct | VolumeVariables< TypeTag, TTag::OneEqNCNI > |
| Set the volume variables property. More... | |
| struct | LocalResidual< TypeTag, TTag::OneEqNCNI > |
| The local residual. More... | |
| struct | FluxVariables< TypeTag, TTag::OneEqNCNI > |
| The flux variables. More... | |
| struct | IOFields< TypeTag, TTag::OneEqNCNI > |
| The specific I/O fields. More... | |
| struct | ZeroEqNCModelTraits |
| Traits for the Reynolds-averaged Navier-Stokes 0-Eq. model. More... | |
| struct | ModelTraits< TypeTag, TTag::ZeroEqNC > |
| The model traits of the isothermal model. More... | |
| struct | VolumeVariables< TypeTag, TTag::ZeroEqNC > |
| Set the volume variables property. More... | |
| struct | IOFields< TypeTag, TTag::ZeroEqNC > |
| The specific I/O fields. More... | |
| struct | ModelTraits< TypeTag, TTag::ZeroEqNCNI > |
| The model traits of the non-isothermal model. More... | |
| struct | VolumeVariables< TypeTag, TTag::ZeroEqNCNI > |
| Set the volume variables property. More... | |
| struct | IOFields< TypeTag, TTag::ZeroEqNCNI > |
| The specific I/O fields. More... | |
| struct | NormalizePressure< TypeTag, TTag::NavierStokes > |
| Normalize the pressure term in the momentum balance by default. More... | |
| struct | ModelTraits< TypeTag, TTag::NavierStokes > |
| struct | FluidState< TypeTag, TTag::NavierStokes > |
| The fluid state which is used by the volume variables to store the thermodynamic state. This should be chosen appropriately for the model ((non-)isothermal, equilibrium, ...). This can be done in the problem. More... | |
| struct | LocalResidual< TypeTag, TTag::NavierStokes > |
| The local residual. More... | |
| struct | VolumeVariables< TypeTag, TTag::NavierStokes > |
| Set the volume variables property. More... | |
| struct | FluxVariables< TypeTag, TTag::NavierStokes > |
| The flux variables. More... | |
| struct | IOFields< TypeTag, TTag::NavierStokes > |
| The specific I/O fields. More... | |
| struct | ModelTraits< TypeTag, TTag::NavierStokesNI > |
| The model traits of the non-isothermal model. More... | |
| struct | IOFields< TypeTag, TTag::NavierStokesNI > |
| The specific non-isothermal I/O fields. More... | |
| struct | FluxVariablesCache< TypeTag, TTag::FreeFlow > |
| The flux variables cache class, by default the one for free flow. More... | |
| struct | FluxVariablesCacheFiller< TypeTag, TTag::FreeFlow > |
| struct | HeatConductionType< TypeTag, TTag::FreeFlow > |
| Use Fourier's Law as default heat conduction type. More... | |
| struct | RANSModelTraits |
| Traits for the Reynolds-averaged Navier-Stokes model. More... | |
| struct | ModelTraits< TypeTag, TTag::RANS > |
| The model traits of the isothermal model. More... | |
| struct | IOFields< TypeTag, TTag::RANS > |
| The specific I/O fields. More... | |
| struct | ModelTraits< TypeTag, TTag::RANSNI > |
| The model traits of the non-isothermal model. More... | |
| struct | IOFields< TypeTag, TTag::RANSNI > |
| The specific non-isothermal I/O fields. More... | |
| struct | HeatConductionType< TypeTag, TTag::RANSNI > |
| Use Fourier's Law as default heat conduction type. More... | |
| struct | OneEqModelTraits |
| Traits for the Spalart-Allmaras model. More... | |
| struct | ModelTraits< TypeTag, TTag::OneEq > |
| < states some specifics of the isothermal Spalart-Allmaras model More... | |
| struct | FluxVariables< TypeTag, TTag::OneEq > |
| The flux variables. More... | |
| struct | LocalResidual< TypeTag, TTag::OneEq > |
| The local residual. More... | |
| struct | VolumeVariables< TypeTag, TTag::OneEq > |
| Set the volume variables property. More... | |
| struct | IOFields< TypeTag, TTag::OneEq > |
| The specific I/O fields. More... | |
| struct | ModelTraits< TypeTag, TTag::OneEqNI > |
| The model traits of the non-isothermal model. More... | |
| struct | VolumeVariables< TypeTag, TTag::OneEqNI > |
| Set the volume variables property. More... | |
| struct | IOFields< TypeTag, TTag::OneEqNI > |
| The specific non-isothermal I/O fields. More... | |
| struct | KEpsilonModelTraits |
| Traits for the k-epsilon model. More... | |
| struct | ModelTraits< TypeTag, TTag::KEpsilon > |
| < states some specifics of the isothermal k-epsilon model More... | |
| struct | FluxVariables< TypeTag, TTag::KEpsilon > |
| The flux variables. More... | |
| struct | LocalResidual< TypeTag, TTag::KEpsilon > |
| The local residual. More... | |
| struct | VolumeVariables< TypeTag, TTag::KEpsilon > |
| Set the volume variables property. More... | |
| struct | IOFields< TypeTag, TTag::KEpsilon > |
| The specific I/O fields. More... | |
| struct | ModelTraits< TypeTag, TTag::KEpsilonNI > |
| The model traits of the non-isothermal model. More... | |
| struct | VolumeVariables< TypeTag, TTag::KEpsilonNI > |
| Set the volume variables property. More... | |
| struct | IOFields< TypeTag, TTag::KEpsilonNI > |
| The specific non-isothermal I/O fields. More... | |
| struct | KOmegaModelTraits |
| Traits for the k-omega model. More... | |
| struct | ModelTraits< TypeTag, TTag::KOmega > |
| states some specifics of the isothermal k-omega model More... | |
| struct | FluxVariables< TypeTag, TTag::KOmega > |
| The flux variables. More... | |
| struct | LocalResidual< TypeTag, TTag::KOmega > |
| The local residual. More... | |
| struct | VolumeVariables< TypeTag, TTag::KOmega > |
| Set the volume variables property. More... | |
| struct | IOFields< TypeTag, TTag::KOmega > |
| The specific I/O fields. More... | |
| struct | ModelTraits< TypeTag, TTag::KOmegaNI > |
| The model traits of the non-isothermal model. More... | |
| struct | VolumeVariables< TypeTag, TTag::KOmegaNI > |
| Set the volume variables property. More... | |
| struct | IOFields< TypeTag, TTag::KOmegaNI > |
| The specific non-isothermal I/O fields. More... | |
| struct | LowReKEpsilonModelTraits |
| Traits for the low-Reynolds k-epsilon model. More... | |
| struct | ModelTraits< TypeTag, TTag::LowReKEpsilon > |
| < states some specifics of the isothermal low-Reynolds k-epsilon model More... | |
| struct | FluxVariables< TypeTag, TTag::LowReKEpsilon > |
| The flux variables. More... | |
| struct | LocalResidual< TypeTag, TTag::LowReKEpsilon > |
| The local residual. More... | |
| struct | VolumeVariables< TypeTag, TTag::LowReKEpsilon > |
| Set the volume variables property. More... | |
| struct | IOFields< TypeTag, TTag::LowReKEpsilon > |
| The specific I/O fields. More... | |
| struct | ModelTraits< TypeTag, TTag::LowReKEpsilonNI > |
| The model traits of the non-isothermal model. More... | |
| struct | VolumeVariables< TypeTag, TTag::LowReKEpsilonNI > |
| Set the volume variables property. More... | |
| struct | IOFields< TypeTag, TTag::LowReKEpsilonNI > |
| The specific non-isothermal I/O fields. More... | |
| struct | ZeroEqModelTraits |
| Traits for the ZeroEq model. More... | |
| struct | ModelTraits< TypeTag, TTag::ZeroEq > |
| struct | VolumeVariables< TypeTag, TTag::ZeroEq > |
| Set the volume variables property. More... | |
| struct | ModelTraits< TypeTag, TTag::ZeroEqNI > |
| The model traits of the non-isothermal model. More... | |
| struct | VolumeVariables< TypeTag, TTag::ZeroEqNI > |
| Set the volume variables property. More... | |
| struct | ModelTraits< TypeTag, TTag::ShallowWater > |
| struct | LocalResidual< TypeTag, TTag::ShallowWater > |
| struct | FluxVariables< TypeTag, TTag::ShallowWater > |
| struct | VolumeVariables< TypeTag, TTag::ShallowWater > |
| struct | FluxVariablesCache< TypeTag, TTag::ShallowWater > |
| struct | FluxVariablesCacheFiller< TypeTag, TTag::ShallowWater > |
| struct | IOFields< TypeTag, TTag::ShallowWater > |
| struct | AdvectionType< TypeTag, TTag::ShallowWater > |
| struct | LocalResidual< TypeTag, TTag::Elastic > |
| Use the local residual of the elastic model. More... | |
| struct | ModelTraits< TypeTag, TTag::Elastic > |
| The model traits of the elastic model. More... | |
| struct | VolumeVariables< TypeTag, TTag::Elastic > |
| Set the volume variables property. More... | |
| struct | StressType< TypeTag, TTag::Elastic > |
| By default, we use hooke's law for stress evaluations. More... | |
| struct | LocalResidual< TypeTag, TTag::PoroElastic > |
| Use the local residual of the poro-elastic model. More... | |
| struct | IOFields< TypeTag, TTag::PoroElastic > |
| default vtk output fields specific to this model More... | |
| struct | ModelTraits< TypeTag, TTag::PoroElastic > |
| The deault model traits of the poro-elastic model. More... | |
| struct | VolumeVariables< TypeTag, TTag::PoroElastic > |
| Set the volume variables property. More... | |
| struct | StressType< TypeTag, TTag::PoroElastic > |
| Per default, we use effective stresses on the basis of Hooke's Law. More... | |
| struct | FluxVariablesCache< TypeTag, TTag::Geomechanics > |
| The flux variables cache class for models involving flow in porous media. More... | |
| struct | VelocityOutput< TypeTag, TTag::Geomechanics > |
| The (currently empty) velocity output. More... | |
| struct | SolidState< TypeTag, TTag::Geomechanics > |
| The solid state must be inert. More... | |
| struct | SolidSystem< TypeTag, TTag::Geomechanics > |
| Per default we use one constant component in the inert solid system. More... | |
| struct | MaterialLaw |
| struct | BaseLocalResidual< TypeTag, TTag::BoxFacetCouplingModel > |
| Use the box local residual for models with facet coupling. More... | |
| struct | AdvectionType< TypeTag, TTag::BoxFacetCouplingModel > |
| Use the box facet coupling-specific Darcy's law. More... | |
| struct | MolecularDiffusionType< TypeTag, TTag::BoxFacetCouplingModel > |
| Use the box facet coupling-specific Ficks's law. More... | |
| struct | HeatConductionType< TypeTag, TTag::BoxFacetCouplingModel > |
| Use the box facet coupling-specific Fourier's law. More... | |
| struct | FluxVariables< TypeTag, TTag::BoxFacetCouplingModel > |
| Per default, use the porous medium flow flux variables with the modified upwind scheme. More... | |
| struct | ElementBoundaryTypes< TypeTag, TTag::BoxFacetCouplingModel > |
| Per default, use the porous medium flow flux variables with the modified upwind scheme. More... | |
| struct | GridGeometry< TypeTag, TTag::BoxFacetCouplingModel > |
| Set the default for the grid finite volume geometry. More... | |
| struct | BaseLocalResidual< TypeTag, TTag::CCMpfaFacetCouplingModel > |
| Use the cc local residual for models with facet coupling. More... | |
| struct | PrimaryInteractionVolume< TypeTag, TTag::CCMpfaFacetCouplingModel > |
| Use the facet coupling-specific mpfa-o interaction volume. More... | |
| struct | SecondaryInteractionVolume< TypeTag, TTag::CCMpfaFacetCouplingModel > |
| Use the facet coupling-specific mpfa-o interaction volume. More... | |
| struct | FluxVariables< TypeTag, TTag::CCMpfaFacetCouplingModel > |
| Per default, use the porous medium flow flux variables with the modified upwind scheme. More... | |
| struct | AdvectionType< TypeTag, TTag::CCTpfaFacetCouplingModel > |
| Use the tpfa facet coupling-specific Darcy's law. More... | |
| struct | MolecularDiffusionType< TypeTag, TTag::CCTpfaFacetCouplingModel > |
| Use the tpfa facet coupling-specific Ficks's law. More... | |
| struct | HeatConductionType< TypeTag, TTag::CCTpfaFacetCouplingModel > |
| Use the tpfa facet coupling-specific Ficks's law. More... | |
| struct | BaseLocalResidual< TypeTag, TTag::CCTpfaFacetCouplingModel > |
| Use the cc local residual for models with facet coupling. More... | |
| struct | FluxVariables< TypeTag, TTag::CCTpfaFacetCouplingModel > |
| Per default, use the porous medium flow flux variables with the modified upwind scheme. More... | |
| struct | IOFields< TypeTag, TTag::OneP > |
| default I/O fields specific to this model More... | |
| struct | LocalResidual< TypeTag, TTag::OneP > |
| the local residual function More... | |
| struct | BaseModelTraits< TypeTag, TTag::OneP > |
| states some specifics of the one-phase model More... | |
| struct | ModelTraits< TypeTag, TTag::OneP > |
| default the actually used traits to the base traits More... | |
| struct | VolumeVariables< TypeTag, TTag::OneP > |
| Set the volume variables property. More... | |
| struct | FluidState< TypeTag, TTag::OneP > |
| The fluid state which is used by the volume variables to store the thermodynamic state. More... | |
| struct | IOFields< TypeTag, TTag::OnePNI > |
| Add temperature to the output. More... | |
| struct | ModelTraits< TypeTag, TTag::OnePNI > |
| The model traits of the non-isothermal model. More... | |
| struct | VolumeVariables< TypeTag, TTag::OnePNI > |
| Set the volume variables property. More... | |
| struct | ThermalConductivityModel< TypeTag, TTag::OnePNI > |
| Use the average for effective conductivities. More... | |
| struct | Velocity< TypeTag, TTag::FVPressureOneP > |
| Set velocity reconstruction implementation standard cell centered finite volume schemes as default. More... | |
| struct | PressureModel< TypeTag, TTag::FVPressureOneP > |
| Set finite volume implementation of the one-phase pressure equation as default pressure model. More... | |
| struct | VisitFacesOnlyOnce< TypeTag, TTag::FVPressureOneP > |
| Allow assembling algorithm for the pressure matrix to assemble only from one side of a cell-cell interface. More... | |
| struct | Model< TypeTag, TTag::PressureOneP > |
| struct | Fluid |
| struct | NumEq< TypeTag, TTag::SequentialOneP > |
| Set number of equations to 1 for isothermal one-phase models. More... | |
| struct | NumPhases< TypeTag, TTag::SequentialOneP > |
| Set number of phases to 1 for one-phase models. More... | |
| struct | NumComponents< TypeTag, TTag::SequentialOneP > |
| Each phase consists of 1 pure component. More... | |
| struct | Indices< TypeTag, TTag::SequentialOneP > |
| Chose the set of indices for the one-phase formulation. More... | |
| struct | Variables< TypeTag, TTag::SequentialOneP > |
| Set general sequential VariableClass as default. More... | |
| struct | CellData< TypeTag, TTag::SequentialOneP > |
| Set standart CellData of immiscible one-phase models as default. More... | |
| struct | SpatialParams< TypeTag, TTag::SequentialOneP > |
| The spatial parameters to be employed. Use BoxSpatialParams by default. More... | |
| struct | ReplaceCompEqIdx< TypeTag, TTag::OnePNC > |
| Set as default that no component mass balance is replaced by the total mass balance. More... | |
| struct | BaseModelTraits< TypeTag, TTag::OnePNC > |
| The base model traits. Per default, we use the number of components of the fluid system. More... | |
| struct | ModelTraits< TypeTag, TTag::OnePNC > |
| default the actually used traits to the base traits More... | |
| struct | FluidState< TypeTag, TTag::OnePNC > |
| The fluid state which is used by the volume variables to store the thermodynamic state. More... | |
| struct | EffectiveDiffusivityModel< TypeTag, TTag::OnePNC > |
| Use the model after Millington (1961) for the effective diffusivity. More... | |
| struct | UseMoles< TypeTag, TTag::OnePNC > |
| Use mole fractions in the balance equations by default. More... | |
| struct | LocalResidual< TypeTag, TTag::OnePNC > |
| The local residual function. More... | |
| struct | VolumeVariables< TypeTag, TTag::OnePNC > |
| Set the volume variables property. More... | |
| struct | IOFields< TypeTag, TTag::OnePNC > |
| Set the vtk output fields specific to this model. More... | |
| struct | IOFields< TypeTag, TTag::OnePNCNI > |
| The non-isothermal vtk output fields. More... | |
| struct | ThermalConductivityModel< TypeTag, TTag::OnePNCNI > |
| Use the average for effective conductivities. More... | |
| struct | ModelTraits< TypeTag, TTag::OnePNCNI > |
| Model traits of the non-isothermal model. More... | |
| struct | VolumeVariables< TypeTag, TTag::OnePNCNI > |
| struct | EquilibriumLocalResidual< TypeTag, TTag::OnePNCNonEquil > |
| struct | EquilibriumIOFields< TypeTag, TTag::OnePNCNonEquil > |
| Set the vtk output fields specific to this model. More... | |
| struct | ModelTraits< TypeTag, TTag::OnePNCNonEquil > |
| struct | EnableChemicalNonEquilibrium< TypeTag, TTag::OnePNCNonEquil > |
| struct | EquilibriumModelTraits< TypeTag, TTag::OnePNCNonEquil > |
| Set equilibrium model traits. More... | |
| struct | ThermalConductivityModel< TypeTag, TTag::OnePNCNonEquil > |
| In case we do not assume full non-equilibrium one needs a thermal conductivity. More... | |
| struct | VolumeVariables< TypeTag, TTag::OnePNCNonEquil > |
| Use the mineralization volume variables together with the 2pnc vol vars. More... | |
| struct | VolumeVariables< TypeTag, TTag::OnePNCMin > |
| use the mineralization volume variables together with the 1pnc vol vars More... | |
| struct | LocalResidual< TypeTag, TTag::OnePNCMin > |
| struct | ModelTraits< TypeTag, TTag::OnePNCMin > |
| Use non-mineralization model traits with 1pnc traits. More... | |
| struct | SolidState< TypeTag, TTag::OnePNCMin > |
| The two-phase model uses the immiscible fluid state. More... | |
| struct | IOFields< TypeTag, TTag::OnePNCMin > |
| Use the mineralization vtk output fields. More... | |
| struct | IOFields< TypeTag, TTag::OnePNCMinNI > |
| Non-isothermal vtk output. More... | |
| struct | ModelTraits< TypeTag, TTag::OnePNCMinNI > |
| The non-isothermal model traits. More... | |
| struct | VolumeVariables< TypeTag, TTag::OnePNCMinNI > |
| use the mineralization volume variables together with the 1pnc vol vars More... | |
| struct | ThermalConductivityModel< TypeTag, TTag::OnePNCMinNI > |
| Use the average for effective conductivities. More... | |
| struct | Formulation< TypeTag, TTag::TwoP > |
| < Set the default formulation to pwsn More... | |
| struct | LocalResidual< TypeTag, TTag::TwoP > |
| Use the immiscible local residual operator for the 2p model. More... | |
| struct | BaseModelTraits< TypeTag, TTag::TwoP > |
| The base model traits class. More... | |
| struct | ModelTraits< TypeTag, TTag::TwoP > |
| default the actually used traits to the base traits More... | |
| struct | IOFields< TypeTag, TTag::TwoP > |
| Set the vtk output fields specific to the twop model. More... | |
| struct | VolumeVariables< TypeTag, TTag::TwoP > |
| Set the volume variables property. More... | |
| struct | FluidState< TypeTag, TTag::TwoP > |
| The two-phase model uses the immiscible fluid state. More... | |
| struct | ModelTraits< TypeTag, TTag::TwoPNI > |
| The non-isothermal model traits class. More... | |
| struct | VolumeVariables< TypeTag, TTag::TwoPNI > |
| Set the volume variables property. More... | |
| struct | IOFields< TypeTag, TTag::TwoPNI > |
| Set the vtk output fields specific to the non-isothermal twop model. More... | |
| struct | ThermalConductivityModel< TypeTag, TTag::TwoPNI > |
| Somerton is used as default model to compute the effective thermal heat conductivity. More... | |
| struct | Velocity< TypeTag, TTag::FVPressureTwoP > |
| Set velocity reconstruction implementation standard cell centered finite volume schemes as default. More... | |
| struct | PressureModel< TypeTag, TTag::FVPressureTwoP > |
| Set finite volume implementation of the two-phase pressure equation as default pressure model. More... | |
| struct | VisitFacesOnlyOnce< TypeTag, TTag::FVPressureTwoP > |
| Allow assembling algorithm for the pressure matrix to assemble only from one side of a cell-cell interface. More... | |
| struct | Velocity< TypeTag, TTag::FVPressureTwoPAdaptive > |
| Set velocity reconstruction implementation for grid-adaptive cell centered finite volume schemes as default. More... | |
| struct | PressureModel< TypeTag, TTag::FVPressureTwoPAdaptive > |
| Set finite volume implementation of the two-phase pressure equation which allows hanging nodes as default pressure model. More... | |
| struct | VisitFacesOnlyOnce< TypeTag, TTag::FVPressureTwoPAdaptive > |
| Allow assembling algorithm for the pressure matrix to assemble only from one side of a cell-cell interface. More... | |
| struct | PressureModel< TypeTag, TTag::MimeticPressureTwoP > |
| struct | LocalStiffness< TypeTag, TTag::MimeticPressureTwoP > |
| struct | PressureModel< TypeTag, TTag::MimeticPressureTwoPAdaptive > |
| struct | LocalStiffness< TypeTag, TTag::MimeticPressureTwoPAdaptive > |
| struct | PressureModel< TypeTag, TTag::FvMpfaL2dPressureTwoP > |
| struct | Velocity< TypeTag, TTag::FvMpfaL2dPressureTwoP > |
| Set velocity reconstruction implementation standard cell centered finite volume schemes as default. More... | |
| struct | PressureModel< TypeTag, TTag::FvMpfaL2dPressureTwoPAdaptive > |
| struct | Velocity< TypeTag, TTag::FvMpfaL2dPressureTwoPAdaptive > |
| Set velocity reconstruction implementation standard cell centered finite volume schemes as default. More... | |
| struct | MPFAInteractionVolume< TypeTag, TTag::FvMpfaL3dPressureTwoP > |
| struct | MPFAInteractionVolumeContainer< TypeTag, TTag::FvMpfaL3dPressureTwoP > |
| struct | PressureModel< TypeTag, TTag::FvMpfaL3dPressureTwoP > |
| struct | Velocity< TypeTag, TTag::FvMpfaL3dPressureTwoP > |
| struct | MPFAInteractionVolume< TypeTag, TTag::FvMpfaL3dPressureTwoPAdaptive > |
| struct | MPFAInteractionVolumeContainer< TypeTag, TTag::FvMpfaL3dPressureTwoPAdaptive > |
| struct | PressureModel< TypeTag, TTag::FvMpfaL3dPressureTwoPAdaptive > |
| struct | Velocity< TypeTag, TTag::FvMpfaL3dPressureTwoPAdaptive > |
| struct | PressureModel< TypeTag, TTag::FvMpfaO2dPressureTwoP > |
| struct | Velocity< TypeTag, TTag::FvMpfaO2dPressureTwoP > |
| Set velocity reconstruction implementation standard cell centered finite volume schemes as default. More... | |
| struct | Model< TypeTag, TTag::PressureTwoP > |
| struct | AdaptiveGrid< TypeTag, TTag::IMPESTwoPAdaptive > |
| Enable adaptive grid. More... | |
| struct | Variables< TypeTag, TTag::IMPESTwoPAdaptive > |
| Set variable class for adaptive impet schemes. More... | |
| struct | CellData< TypeTag, TTag::IMPESTwoPAdaptive > |
| Set cell data class for adaptive two-phase IMPES schemes. More... | |
| struct | AdaptionIndicator< TypeTag, TTag::IMPESTwoPAdaptive > |
| Set the standard indicator class of two-phase models for adaption or coarsening. More... | |
| struct | AdaptionInitializationIndicator< TypeTag, TTag::IMPESTwoPAdaptive > |
| Set default class for adaptation initialization indicator. More... | |
| struct | SaturationFormulation |
| The formulation of the saturation model. More... | |
| struct | VelocityFormulation |
| The type of velocity reconstructed for the transport model. More... | |
| struct | EnableCompressibility |
| Returns whether compressibility is allowed. More... | |
| struct | NumEq< TypeTag, TTag::SequentialTwoP > |
| Set number of equations to 2 for isothermal two-phase models. More... | |
| struct | NumPhases< TypeTag, TTag::SequentialTwoP > |
| Set number of phases to 2 for two-phase modelsThe number of phases in the 2p model is 2. More... | |
| struct | NumComponents< TypeTag, TTag::SequentialTwoP > |
| Set number of components to 1 for immiscible two-phase modelsEach phase consists of 1 pure component. More... | |
| struct | Formulation< TypeTag, TTag::SequentialTwoP > |
| Set \(p_w\)- \(S_w\) formulation as default two-phase formulation. More... | |
| struct | Indices< TypeTag, TTag::SequentialTwoP > |
| Chose the set of indices depending on the chosen formulation. More... | |
| struct | PressureFormulation< TypeTag, TTag::SequentialTwoP > |
| Set the default pressure formulation according to the chosen two-phase formulation. More... | |
| struct | SaturationFormulation< TypeTag, TTag::SequentialTwoP > |
| Set the default saturation formulation according to the chosen two-phase formulation. More... | |
| struct | VelocityFormulation< TypeTag, TTag::SequentialTwoP > |
| Set the default velocity formulation according to the chosen two-phase formulation. More... | |
| struct | EnableCompressibility< TypeTag, TTag::SequentialTwoP > |
| Disable compressibility by default. More... | |
| struct | Variables< TypeTag, TTag::SequentialTwoP > |
| Set general sequential VariableClass as default. More... | |
| struct | CellData< TypeTag, TTag::SequentialTwoP > |
| Set standart CellData of immiscible two-phase models as default. More... | |
| struct | FluidState< TypeTag, TTag::SequentialTwoP > |
| Set default fluid state. More... | |
| struct | SpatialParams< TypeTag, TTag::SequentialTwoP > |
| The spatial parameters to be employed. Use SequentialFVSpatialParams by default. More... | |
| struct | PrecomputedConstRels |
| struct | EvalCflFluxFunction< TypeTag, TTag::FVTransportTwoP > |
| Set the default implementation of the cfl-condition. More... | |
| struct | CapillaryFlux< TypeTag, TTag::FVTransportTwoP > |
| Set the default implementation of a diffusive flux -> diffusive flux dissabled. More... | |
| struct | GravityFlux< TypeTag, TTag::FVTransportTwoP > |
| Set the default implementation of an additional convective flux -> additional convective flux dissabled. More... | |
| struct | PrecomputedConstRels< TypeTag, TTag::FVTransportTwoP > |
| Set PrecomputedConstRels flag true as default. More... | |
| struct | TransportModel< TypeTag, TTag::FVTransportTwoP > |
| Set finite volume implementation of the two-phase saturation equation as default saturation model. More... | |
| struct | Model< TypeTag, TTag::TransportTwoP > |
| struct | Velocity< TypeTag, TTag::TransportTwoP > |
| struct | CapillaryFlux |
| The type of the diffusive part in a transport equation. More... | |
| struct | GravityFlux |
| The type of a convective part in a transport equation. More... | |
| struct | UseBlockingOfSpuriousFlow |
| Determines whether blocking of spurious flow is used or not. More... | |
| struct | FluidState< TypeTag, TTag::TwoPOneCNI > |
| The fluid state which is used by the volume variables to store the thermodynamic state. This should be chosen appropriately for the model ((non-)isothermal, equilibrium, ...). This can be done in the problem. More... | |
| struct | Formulation< TypeTag, TTag::TwoPOneCNI > |
| Set the default formulation to pw-sn. More... | |
| struct | UseBlockingOfSpuriousFlow< TypeTag, TTag::TwoPOneCNI > |
| Do not block spurious flows by default. More... | |
| struct | LocalResidual< TypeTag, TTag::TwoPOneCNI > |
| The specific local residual (i.e. balance equations). More... | |
| struct | AdvectionType< TypeTag, TTag::TwoPOneCNI > |
| Use a modified version of Darcy's law which allows for blocking of spurious flows. More... | |
| struct | VolumeVariables< TypeTag, TTag::TwoPOneCNI > |
| Set the volume variables property. More... | |
| struct | PrimaryVariables< TypeTag, TTag::TwoPOneCNI > |
| The primary variables vector for the 2p1cni model. More... | |
| struct | ThermalConductivityModel< TypeTag, TTag::TwoPOneCNI > |
| Somerton is used as default model to compute the effective thermal heat conductivity. More... | |
| struct | ModelTraits< TypeTag, TTag::TwoPOneCNI > |
| Set the non-isothermal model traits. More... | |
| struct | IOFields< TypeTag, TTag::TwoPOneCNI > |
| The non-isothermal vtk output fields. More... | |
| struct | BaseModelTraits< TypeTag, TTag::TwoPTwoC > |
| Set the model traits property. More... | |
| struct | ModelTraits< TypeTag, TTag::TwoPTwoC > |
| struct | VolumeVariables< TypeTag, TTag::TwoPTwoC > |
| Use the 2p2c VolumeVariables. More... | |
| struct | UseConstraintSolver< TypeTag, TTag::TwoPTwoC > |
| Determines whether the constraint solver is used. More... | |
| struct | ModelTraits< TypeTag, TTag::TwoPTwoCNI > |
| Set the non-isothermal model traits. More... | |
| struct | VolumeVariables< TypeTag, TTag::TwoPTwoCNI > |
| Set the volume variables property. More... | |
| struct | IOFields< TypeTag, TTag::TwoPTwoCNI > |
| Set non-isothermal output fields. More... | |
| struct | ThermalConductivityModel< TypeTag, TTag::TwoPTwoCNI > |
| Somerton is used as default model to compute the effective thermal heat conductivity. More... | |
| struct | EquilibriumLocalResidual< TypeTag, TTag::TwoPTwoCNonEquil > |
| struct | EquilibriumIOFields< TypeTag, TTag::TwoPTwoCNonEquil > |
| Set the vtk output fields specific to this model. More... | |
| struct | ModelTraits< TypeTag, TTag::TwoPTwoCNonEquil > |
| struct | EquilibriumModelTraits< TypeTag, TTag::TwoPTwoCNonEquil > |
| Set equilibrium model traits. More... | |
| struct | ThermalConductivityModel< TypeTag, TTag::TwoPTwoCNonEquil > |
| struct | VolumeVariables< TypeTag, TTag::TwoPTwoCNonEquil > |
| Use the nonequilibrium volume variables together with the 2p2c vol vars. More... | |
| struct | ModelTraits< TypeTag, TTag::TwoPTwoCNINonEquil > |
| Set the non-isothermal model traits with the nonequilibrium model traits as isothermal traits. More... | |
| struct | EquilibriumIOFields< TypeTag, TTag::TwoPTwoCNINonEquil > |
| Set the equilibrium IO fields which are in that case the nonisothermal io fields. More... | |
| struct | VolumeVariables< TypeTag, TTag::TwoPTwoCNINonEquil > |
| Use the nonequilibrium volume variables together with the 2p2c vol vars. More... | |
| struct | ThermalConductivityModel< TypeTag, TTag::TwoPTwoCNINonEquil > |
| Somerton is used as default model to compute the effective thermal heat conductivity. More... | |
| struct | AdaptiveGrid< TypeTag, TTag::SequentialTwoPTwoCAdaptive > |
| struct | GridTypeIndices< TypeTag, TTag::SequentialTwoPTwoCAdaptive > |
| Property not used but default necessary for mpfa2p. More... | |
| struct | CellData< TypeTag, TTag::SequentialTwoPTwoCAdaptive > |
| struct | Variables< TypeTag, TTag::SequentialTwoPTwoCAdaptive > |
| struct | Indices< TypeTag, TTag::SequentialTwoPTwoCAdaptive > |
| struct | TransportModel< TypeTag, TTag::SequentialTwoPTwoCAdaptive > |
| struct | PressureModel< TypeTag, TTag::SequentialTwoPTwoCAdaptive > |
| struct | MPFAInteractionVolume< TypeTag, TTag::SequentialTwoPTwoCAdaptive > |
| struct | MPFAInteractionVolumeContainer< TypeTag, TTag::SequentialTwoPTwoCAdaptive > |
| struct | EnableCapillarity |
| Returns whether capillarity is regarded. More... | |
| struct | BoundaryMobility |
| struct | RegulateBoundaryPermeability |
| A minimum permeability can be assigned via the runtime-Parameter SpatialParams.minBoundaryPermeability. More... | |
| struct | Indices< TypeTag, TTag::SequentialTwoPTwoC > |
| struct | NumEq< TypeTag, TTag::SequentialTwoPTwoC > |
| struct | NumPhases< TypeTag, TTag::SequentialTwoPTwoC > |
| < The number of phases in the 2p2c model is 2 More... | |
| struct | NumComponents< TypeTag, TTag::SequentialTwoPTwoC > |
| < The number of components in the 2p2c model is 2 More... | |
| struct | PressureFormulation< TypeTag, TTag::SequentialTwoPTwoC > |
| Set the default formulationCompositional models are very likely compressible. More... | |
| struct | SaturationFormulation< TypeTag, TTag::SequentialTwoPTwoC > |
| Compositional models are very likely compressible. More... | |
| struct | VelocityFormulation< TypeTag, TTag::SequentialTwoPTwoC > |
| Compositional models are very likely compressible. More... | |
| struct | TransportSolutionType< TypeTag, TTag::SequentialTwoPTwoC > |
| struct | EnableCompressibility< TypeTag, TTag::SequentialTwoPTwoC > |
| Compositional models are very likely compressible. More... | |
| struct | VisitFacesOnlyOnce< TypeTag, TTag::SequentialTwoPTwoC > |
| Faces are regarded from both sides. More... | |
| struct | EnableCapillarity< TypeTag, TTag::SequentialTwoPTwoC > |
| Capillarity is enabled. More... | |
| struct | BoundaryMobility< TypeTag, TTag::SequentialTwoPTwoC > |
| < Saturation scales flux on Dirichlet B.C. More... | |
| struct | Variables< TypeTag, TTag::SequentialTwoPTwoC > |
| struct | CellData< TypeTag, TTag::SequentialTwoPTwoC > |
| struct | FluidState< TypeTag, TTag::SequentialTwoPTwoC > |
| struct | SpatialParams< TypeTag, TTag::SequentialTwoPTwoC > |
| The spatial parameters to be employed. More... | |
| struct | RegulateBoundaryPermeability< TypeTag, TTag::SequentialTwoPTwoC > |
| Switch off permeability regularization at Dirichlet boundaries by default. More... | |
| struct | PrimaryVariables< TypeTag, TTag::TwoPNC > |
| The primary variables vector for the 2pnc model. More... | |
| struct | VolumeVariables< TypeTag, TTag::TwoPNC > |
| Set the volume variables property. More... | |
| struct | BaseModelTraits< TypeTag, TTag::TwoPNC > |
| Set the base model traits. More... | |
| struct | ModelTraits< TypeTag, TTag::TwoPNC > |
| default the actually used traits to the base traits More... | |
| struct | IOFields< TypeTag, TTag::TwoPNC > |
| Set the vtk output fields specific to this model. More... | |
| struct | LocalResidual< TypeTag, TTag::TwoPNC > |
| Use the compositional local residual. More... | |
| struct | ReplaceCompEqIdx< TypeTag, TTag::TwoPNC > |
| Per default, no component mass balance is replaced. More... | |
| struct | Formulation< TypeTag, TTag::TwoPNC > |
| Default formulation is pw-Sn, overwrite if necessary. More... | |
| struct | SetMoleFractionsForFirstPhase< TypeTag, TTag::TwoPNC > |
| Set the primary variables mole fractions for the wetting or non-wetting phase. More... | |
| struct | UseMoles< TypeTag, TTag::TwoPNC > |
| Use mole fractions in the balance equations by default. More... | |
| struct | EffectiveDiffusivityModel< TypeTag, TTag::TwoPNC > |
| Use the model after Millington (1961) for the effective diffusivity. More... | |
| struct | FluidState< TypeTag, TTag::TwoPNC > |
| This model uses the compositional fluid state. More... | |
| struct | ModelTraits< TypeTag, TTag::TwoPNCNI > |
| Set the non-isothermal model traits. More... | |
| struct | VolumeVariables< TypeTag, TTag::TwoPNCNI > |
| Set the volume variables property. More... | |
| struct | IOFields< TypeTag, TTag::TwoPNCNI > |
| Set non-isothermal output fields. More... | |
| struct | ThermalConductivityModel< TypeTag, TTag::TwoPNCNI > |
| Somerton is used as default model to compute the effective thermal heat conductivity. More... | |
| struct | LocalResidual< TypeTag, TTag::TwoPNCMin > |
| struct | VolumeVariables< TypeTag, TTag::TwoPNCMin > |
| use the mineralization volume variables together with the 2pnc vol vars More... | |
| struct | IOFields< TypeTag, TTag::TwoPNCMin > |
| Set the vtk output fields specific to this model. More... | |
| struct | ModelTraits< TypeTag, TTag::TwoPNCMin > |
| The 2pnc model traits define the non-mineralization part. More... | |
| struct | SolidState< TypeTag, TTag::TwoPNCMin > |
| The two-phase model uses the immiscible fluid state. More... | |
| struct | ModelTraits< TypeTag, TTag::TwoPNCMinNI > |
| Set non-isothermal model traits. More... | |
| struct | VolumeVariables< TypeTag, TTag::TwoPNCMinNI > |
| Set the volume variables property. More... | |
| struct | IOFields< TypeTag, TTag::TwoPNCMinNI > |
| Non-isothermal vtkoutput. More... | |
| struct | ThermalConductivityModel< TypeTag, TTag::TwoPNCMinNI > |
| Use the effective thermal conductivities calculated using the Somerton method. More... | |
| struct | ModelTraits< TypeTag, TTag::ThreeP > |
| Set the model traits. More... | |
| struct | LocalResidual< TypeTag, TTag::ThreeP > |
| The local residual function of the conservation equations. More... | |
| struct | VolumeVariables< TypeTag, TTag::ThreeP > |
| Set the volume variables property. More... | |
| struct | FluidState< TypeTag, TTag::ThreeP > |
| The fluid state which is used by the volume variables to store the thermodynamic state. More... | |
| struct | IOFields< TypeTag, TTag::ThreeP > |
| Set the vtk output fields specific to this model. More... | |
| struct | ThermalConductivityModel< TypeTag, TTag::ThreePNI > |
| Somerton is used as default model to compute the effective thermal heat conductivity. More... | |
| struct | IOFields< TypeTag, TTag::ThreePNI > |
| Set non-isothermal output fields. More... | |
| struct | ModelTraits< TypeTag, TTag::ThreePNI > |
| Set non-isothermal model traits. More... | |
| struct | VolumeVariables< TypeTag, TTag::ThreePNI > |
| Set the volume variables property. More... | |
| struct | BaseModelTraits< TypeTag, TTag::ThreePThreeC > |
| Set the model traits. More... | |
| struct | ModelTraits< TypeTag, TTag::ThreePThreeC > |
| struct | UseConstraintSolver< TypeTag, TTag::ThreePThreeC > |
| Determines whether a constraint solver should be used explicitly. More... | |
| struct | ReplaceCompEqIdx< TypeTag, TTag::ThreePThreeC > |
| Set as default that no component mass balance is replaced by the total mass balance. More... | |
| struct | FluidState< TypeTag, TTag::ThreePThreeC > |
| The fluid state which is used by the volume variables to store the thermodynamic state. This should be chosen appropriately for the model ((non-)isothermal, equilibrium, ...). This can be done in the problem. More... | |
| struct | LocalResidual< TypeTag, TTag::ThreePThreeC > |
| The local residual function of the conservation equations. More... | |
| struct | PrimaryVariables< TypeTag, TTag::ThreePThreeC > |
| The primary variables vector for the 3p3c model. More... | |
| struct | VolumeVariables< TypeTag, TTag::ThreePThreeC > |
| Set the volume variables property. More... | |
| struct | EffectiveDiffusivityModel< TypeTag, TTag::ThreePThreeC > |
| The model after Millington (1961) is used for the effective diffusivity. More... | |
| struct | IOFields< TypeTag, TTag::ThreePThreeC > |
| Set the vtk output fields specific to this model. More... | |
| struct | UseMoles< TypeTag, TTag::ThreePThreeC > |
| Use mole fractions in the balance equations by default. More... | |
| struct | ModelTraits< TypeTag, TTag::ThreePThreeCNI > |
| Set non-isothermal NumEq. More... | |
| struct | VolumeVariables< TypeTag, TTag::ThreePThreeCNI > |
| Set the volume variables property. More... | |
| struct | IOFields< TypeTag, TTag::ThreePThreeCNI > |
| Set the non-isothermal vktoutputfields. More... | |
| struct | ThermalConductivityModel< TypeTag, TTag::ThreePThreeCNI > |
| Somerton is used as default model to compute the effective thermal heat conductivity. More... | |
| struct | ModelTraits< TypeTag, TTag::ThreePWaterOilNI > |
| Set the non-isothermal model traits property. More... | |
| struct | FluidState< TypeTag, TTag::ThreePWaterOilNI > |
| The fluid state which is used by the volume variables to store the thermodynamic state. This should be chosen appropriately for the model ((non-)isothermal, equilibrium, ...). This can be done in the problem. More... | |
| struct | LocalResidual< TypeTag, TTag::ThreePWaterOilNI > |
| The local residual function of the conservation equations. More... | |
| struct | ReplaceCompEqIdx< TypeTag, TTag::ThreePWaterOilNI > |
| Set as default that no component mass balance is replaced by the total mass balance. More... | |
| struct | PrimaryVariables< TypeTag, TTag::ThreePWaterOilNI > |
| The primary variables vector for the 3p3c model. More... | |
| struct | OnlyGasPhaseCanDisappear< TypeTag, TTag::ThreePWaterOilNI > |
| Determines whether a constraint solver should be used explicitly. More... | |
| struct | VolumeVariables< TypeTag, TTag::ThreePWaterOilNI > |
| Set the volume variables property. More... | |
| struct | EffectiveDiffusivityModel< TypeTag, TTag::ThreePWaterOilNI > |
| Use the model after Millington (1961) for the effective diffusivity. More... | |
| struct | UseMoles< TypeTag, TTag::ThreePWaterOilNI > |
| struct | ThermalConductivityModel< TypeTag, TTag::ThreePWaterOilNI > |
| Somerton is used as default model to compute the effective thermal heat conductivity. More... | |
| struct | IOFields< TypeTag, TTag::ThreePWaterOilNI > |
| Set the non-isothermal vkt output fields. More... | |
| struct | GridGeometry< TypeTag, TTag::BoxDfmModel > |
| Set the default for the grid geometry. More... | |
| struct | FluxVariablesCache< TypeTag, TTag::BoxDfmModel > |
| The flux variables cache class specific to box-dfm porous medium flow models. More... | |
| struct | VolumeVariables< TypeTag, TTag::TwoPTwoCCO2 > |
| the co2 volume variables use the same traits as the 2p2c model More... | |
| struct | VolumeVariables< TypeTag, TTag::TwoPTwoCCO2NI > |
| struct | LocalResidual< TypeTag, TTag::MPNC > |
| Use the MpNc local residual for the MpNc model. More... | |
| struct | ModelTraits< TypeTag, TTag::MPNC > |
| Set the model traits property. More... | |
| struct | FluidState< TypeTag, TTag::MPNC > |
| This model uses the compositional fluid state. More... | |
| struct | VolumeVariables< TypeTag, TTag::MPNC > |
| Set the volume variables property. More... | |
| struct | ReplaceCompEqIdx< TypeTag, TTag::MPNC > |
| Per default, no component mass balance is replaced. More... | |
| struct | UseMoles< TypeTag, TTag::MPNC > |
| Use mole fractions in the balance equations by default. More... | |
| struct | EffectiveDiffusivityModel< TypeTag, TTag::MPNC > |
| Use the model after Millington (1961) for the effective diffusivity. More... | |
| struct | PressureFormulation< TypeTag, TTag::MPNC > |
| Set the default pressure formulation to the pressure of the (most) wetting phase. More... | |
| struct | IOFields< TypeTag, TTag::MPNC > |
| Set the vtk output fields specific to this model. More... | |
| struct | ModelTraits< TypeTag, TTag::MPNCNI > |
| set the non-isothermal model traits More... | |
| struct | VolumeVariables< TypeTag, TTag::MPNCNI > |
| Set the volume variables property. More... | |
| struct | ThermalConductivityModel< TypeTag, TTag::MPNCNI > |
| Somerton is used as default model to compute the effective thermal heat conductivity. More... | |
| struct | EquilibriumLocalResidual< TypeTag, TTag::MPNCNonequil > |
| struct | EquilibriumIOFields< TypeTag, TTag::MPNCNonequil > |
| Set the vtk output fields specific to this model. More... | |
| struct | ModelTraits< TypeTag, TTag::MPNCNonequil > |
| struct | EquilibriumModelTraits< TypeTag, TTag::MPNCNonequil > |
| set equilibrium model traits More... | |
| struct | ThermalConductivityModel< TypeTag, TTag::MPNCNonequil > |
| in case we do not assume full non-equilibrium one needs a thermal conductivity More... | |
| struct | VolumeVariables< TypeTag, TTag::MPNCNonequil > |
| use the mineralization volume variables together with the 2pnc vol vars More... | |
| struct | ModelTraits< TypeTag, TTag::NonEquilibrium > |
| Set the model traits. More... | |
| struct | EnableThermalNonEquilibrium< TypeTag, TTag::NonEquilibrium > |
| Per default, we consider both thermal and chemical non-equilibrium. More... | |
| struct | EnableChemicalNonEquilibrium< TypeTag, TTag::NonEquilibrium > |
| struct | NumEnergyEqSolid< TypeTag, TTag::NonEquilibrium > |
| Default values for the number of energy balance equations. More... | |
| struct | NumEnergyEqFluid< TypeTag, TTag::NonEquilibrium > |
| struct | EnergyLocalResidual< TypeTag, TTag::NonEquilibrium > |
| struct | LocalResidual< TypeTag, TTag::NonEquilibrium > |
| struct | HeatConductionType< TypeTag, TTag::NonEquilibrium > |
| struct | FluidState< TypeTag, TTag::NonEquilibrium > |
| struct | GridVariables< TypeTag, TTag::NonEquilibrium > |
| The grid variables. More... | |
| struct | IOFields< TypeTag, TTag::NonEquilibrium > |
| indices for non-isothermal models More... | |
| struct | NusseltFormulation< TypeTag, TTag::NonEquilibrium > |
| struct | SherwoodFormulation< TypeTag, TTag::NonEquilibrium > |
| Set the default formulation for the sherwood correlation Other possible parametrizations can be found in the dimensionlessnumbers. More... | |
| struct | FluxVariables< TypeTag, TTag::PorousMediumFlow > |
| The flux variables for models involving flow in porous media. More... | |
| struct | FluxVariablesCache< TypeTag, TTag::PorousMediumFlow > |
| The flux variables cache class for models involving flow in porous media. More... | |
| struct | FluxVariablesCacheFiller< TypeTag, TTag::PorousMediumFlow > |
| struct | AdvectionType< TypeTag, TTag::PorousMediumFlow > |
| By default, we use darcy's law for the advective fluxes. More... | |
| struct | MolecularDiffusionType< TypeTag, TTag::PorousMediumFlow > |
| By default, we use fick's law for the diffusive fluxes. More... | |
| struct | HeatConductionType< TypeTag, TTag::PorousMediumFlow > |
| By default, we use fourier's law as the default for heat conduction fluxes. More... | |
| struct | SolutionDependentAdvection< TypeTag, TTag::PorousMediumFlow > |
| By default, parameters are solution-dependent. More... | |
| struct | SolutionDependentMolecularDiffusion< TypeTag, TTag::PorousMediumFlow > |
| struct | SolutionDependentHeatConduction< TypeTag, TTag::PorousMediumFlow > |
| struct | EnergyLocalResidual< TypeTag, TTag::PorousMediumFlow > |
| The default implementation of the energy balance equation for flow problems in porous media. More... | |
| struct | VelocityOutput< TypeTag, TTag::PorousMediumFlow > |
| Velocity output. More... | |
| struct | EnableThermalNonEquilibrium< TypeTag, TTag::PorousMediumFlow > |
| struct | EnableBoxInterfaceSolver< TypeTag, TTag::PorousMediumFlow > |
| Per default, we disable the box interface solver. More... | |
| struct | SolidState< TypeTag, TTag::PorousMediumFlow > |
| per default solid state is inert More... | |
| struct | SolidSystem< TypeTag, TTag::PorousMediumFlow > |
| struct | LocalResidual< TypeTag, TTag::Richards > |
| The local residual operator. More... | |
| struct | IOFields< TypeTag, TTag::Richards > |
| Set the vtk output fields specific to this model. More... | |
| struct | ModelTraits< TypeTag, TTag::Richards > |
| The model traits. More... | |
| struct | VolumeVariables< TypeTag, TTag::Richards > |
| Set the volume variables property. More... | |
| struct | EnableWaterDiffusionInAir< TypeTag, TTag::Richards > |
| struct | EffectiveDiffusivityModel< TypeTag, TTag::Richards > |
| Use the model after Millington (1961) for the effective diffusivity. More... | |
| struct | PrimaryVariables< TypeTag, TTag::Richards > |
| The primary variables vector for the richards model. More... | |
| struct | FluidSystem< TypeTag, TTag::Richards > |
| The fluid system used by the model. More... | |
| struct | FluidState< TypeTag, TTag::Richards > |
| The fluid state which is used by the volume variables to store the thermodynamic state. This should be chosen appropriately for the model ((non-)isothermal, equilibrium, ...). This can be done in the problem. More... | |
| struct | ThermalConductivityModel< TypeTag, TTag::RichardsNI > |
| Somerton is used as default model to compute the effective thermal heat conductivity. More... | |
| struct | ModelTraits< TypeTag, TTag::RichardsNI > |
| set non-isothermal model traits More... | |
| struct | IOFields< TypeTag, TTag::RichardsNI > |
| Set the vtk output fields specific to th non-isothermal model. More... | |
| struct | VolumeVariables< TypeTag, TTag::RichardsNI > |
| Set the volume variables property. More... | |
| struct | BaseModelTraits< TypeTag, TTag::RichardsNC > |
| Set the model traits class. More... | |
| struct | ModelTraits< TypeTag, TTag::RichardsNC > |
| struct | UseMoles< TypeTag, TTag::RichardsNC > |
| Define that per default mole fractions are used in the balance equations. More... | |
| struct | LocalResidual< TypeTag, TTag::RichardsNC > |
| Use the dedicated local residual. More... | |
| struct | ReplaceCompEqIdx< TypeTag, TTag::RichardsNC > |
| struct | VolumeVariables< TypeTag, TTag::RichardsNC > |
| Set the volume variables property. More... | |
| struct | EnableWaterDiffusionInAir< TypeTag, TTag::RichardsNC > |
| struct | FluidSystem< TypeTag, TTag::RichardsNC > |
| The fluid system used by the model. More... | |
| struct | FluidState< TypeTag, TTag::RichardsNC > |
| The fluid state which is used by the volume variables to store the thermodynamic state. This should be chosen appropriately for the model ((non-)isothermal, equilibrium, ...). This can be done in the problem. More... | |
| struct | IOFields< TypeTag, TTag::RichardsNC > |
| Set the vtk output fields specific to this model. More... | |
| struct | EffectiveDiffusivityModel< TypeTag, TTag::RichardsNC > |
| The model after Millington (1961) is used for the effective diffusivity. More... | |
| struct | ThermalConductivityModel< TypeTag, TTag::RichardsNCNI > |
| average is used as default model to compute the effective thermal heat conductivity More... | |
| struct | ModelTraits< TypeTag, TTag::RichardsNCNI > |
| set non-isothermal model traits More... | |
| struct | VolumeVariables< TypeTag, TTag::RichardsNCNI > |
| Set the volume variables property. More... | |
| struct | GridTypeIndices |
| The grid type indices to decide which grid is used. More... | |
| struct | GridImplementation |
| Gives kind of grid implementation in form of a GridType. More... | |
| struct | MPFAInteractionVolume |
| Type of the data container for one interaction volume. More... | |
| struct | MPFAInteractionVolumeContainer |
| Type of the data container for one interaction volume. More... | |
| struct | MPFATransmissibilityCalculator |
| Type defining the transmissibility calculation. More... | |
| struct | GridTypeIndices< TypeTag, TTag::MPFAProperties > |
| Set grid type indices. More... | |
| struct | AdaptiveGrid |
| Defines if the grid is h-adaptive. More... | |
| struct | GridAdaptModel |
| The type of grid adaptation. More... | |
| struct | AdaptionIndicator |
| Class defining the refinement/coarsening indicator. More... | |
| struct | AdaptionInitializationIndicator |
| Class defining the refinement/coarsening indicator for grid initialization. More... | |
| struct | GridAdaptRefineThreshold |
| Tolerance for refinement. More... | |
| struct | GridAdaptCoarsenThreshold |
| Tolerance for coarsening. More... | |
| struct | AdaptiveGrid< TypeTag, TTag::GridAdapt > |
| struct | AdaptionInitializationIndicator< TypeTag, TTag::GridAdapt > |
| struct | GridAdaptModel< TypeTag, TTag::GridAdapt > |
| struct | GridAdaptRefineThreshold< TypeTag, TTag::GridAdapt > |
| struct | GridAdaptCoarsenThreshold< TypeTag, TTag::GridAdapt > |
| struct | Model< TypeTag, TTag::IMPET > |
| struct | LocalStiffness |
| struct | PressureRHSVector |
| Type of the right hand side vector given to the linear solver. More... | |
| struct | PressureSolutionVector |
| struct | VisitFacesOnlyOnce |
| Type of solution vector or pressure systemIndicates if faces are only regarded from one side. More... | |
| struct | VisitFacesOnlyOnce< TypeTag, TTag::Pressure > |
| Faces are only regarded from one side and not from both cells. More... | |
| struct | PressureCoefficientMatrix< TypeTag, TTag::Pressure > |
| struct | PressureRHSVector< TypeTag, TTag::Pressure > |
| struct | PressureSolutionVector< TypeTag, TTag::Pressure > |
| struct | LinearSolver< TypeTag, TTag::Pressure > |
| struct | Velocity< TypeTag, TTag::Pressure > |
| struct | SolutionTypes |
| struct | Indices |
| struct | Model |
| The type of the mode. More... | |
| struct | DiscretizationMethod |
| The type of discretization method. More... | |
| struct | PressureModel |
| The type of the discretization of a pressure model. More... | |
| struct | TransportModel |
| The type of the discretization of a transport model. More... | |
| struct | Velocity |
| The type velocity reconstruction. More... | |
| struct | NumEq |
| Number of equations in the system of PDEs. More... | |
| struct | NumPhases |
| Number of phases in the system. More... | |
| struct | NumComponents |
| Number of components in the system. More... | |
| struct | Variables |
| The type of the container of global variables. More... | |
| struct | CellData |
| Defines data object to be stored. More... | |
| struct | MaxIntersections |
| Gives maximum number of intersections of an element and neighboring elements. More... | |
| struct | PressureCoefficientMatrix |
| Gives maximum number of intersections of an element and neighboring elements. More... | |
| struct | JacobianMatrix< TypeTag, TTag::SequentialModel > |
| Type of the jacobian matrix needed for compatibility with implicit models for the amg backend. More... | |
| struct | ModelTraits< TypeTag, TTag::SequentialModel > |
| struct | GridView< TypeTag, TTag::SequentialModel > |
| Use the leaf grid view if not defined otherwise. More... | |
| struct | MaxIntersections< TypeTag, TTag::SequentialModel > |
| Default number of intersections for quadrilaterals. More... | |
| struct | GridGeometry< TypeTag, TTag::SequentialModel > |
| A simplified grid geometry for compatibility with new style models. More... | |
| struct | SolutionVector< TypeTag, TTag::SequentialModel > |
| For compatibility with new style models we need a solution vector type. More... | |
| struct | SolutionTypes< TypeTag, TTag::SequentialModel > |
| Specifies the types which are assoicated with a solution. More... | |
| struct | Variables< TypeTag, TTag::SequentialModel > |
| struct | PrimaryVariables< TypeTag, TTag::SequentialModel > |
| struct | TimeManager< TypeTag, TTag::SequentialModel > |
| Set the default type for the time manager. More... | |
| struct | BoundaryTypes< TypeTag, TTag::SequentialModel > |
| Boundary types at a single degree of freedom. More... | |
| struct | ModelDefaultParameters< TypeTag, TTag::SequentialModel > |
| do not specific any model-specific default parameters here More... | |
| struct | TransportSolutionType |
| struct | EvalCflFluxFunction |
| Type of the evaluation of the CFL-condition. More... | |
| struct | TransportSolutionType< TypeTag, TTag::Transport > |
| Default implementation for the Vector of the transportet quantity. More... | |
| struct | ModelTraits< TypeTag, TTag::SolidEnergy > |
| set the model traits More... | |
| struct | LocalResidual< TypeTag, TTag::SolidEnergy > |
| set the local residual More... | |
| struct | IOFields< TypeTag, TTag::SolidEnergy > |
| Set the vtk output fields specific to this model. More... | |
| struct | VolumeVariables< TypeTag, TTag::SolidEnergy > |
| Set the volume variables property. More... | |
| struct | ThermalConductivityModel< TypeTag, TTag::SolidEnergy > |
| Use the average for effective conductivities. More... | |
| struct | UseMoles< TypeTag, TTag::Tracer > |
| Define that mole fractions are used in the balance equations. More... | |
| struct | ModelTraits< TypeTag, TTag::Tracer > |
| set the model traits More... | |
| struct | LocalResidual< TypeTag, TTag::Tracer > |
| Use the tracer local residual function for the tracer model. More... | |
| struct | IOFields< TypeTag, TTag::Tracer > |
| Set the vtk output fields specific to this model. More... | |
| struct | VolumeVariables< TypeTag, TTag::Tracer > |
| Set the volume variables property. More... | |
| struct | AdvectionType< TypeTag, TTag::Tracer > |
| We use darcy's law as the default for the advective fluxes. More... | |
| struct | EffectiveDiffusivityModel< TypeTag, TTag::Tracer > |
| Use simple model with constant tortuosity as pm diffusivity model. More... | |
Typedefs | |
| template<class Tuple> | |
| using | ReverseTuple = typename ReverseTupleImpl<Tuple, std::make_index_sequence<std::tuple_size<Tuple>::value>>::type |
| using Dumux::Properties::ReverseTuple = typename ReverseTupleImpl<Tuple, std::make_index_sequence<std::tuple_size<Tuple>::value>>::type |
1.16.1