Newton sover for coupled problems. More...

#include <dumux/multidomain/newtonsolver.hh>

Inheritance diagram for Dumux::MultiDomainNewtonSolver< Assembler, LinearSolver, CouplingManager, Reassembler, Comm >:

Description

template<class Assembler, class LinearSolver, class CouplingManager, class Reassembler = DefaultPartialReassembler, class Comm = Dune::Communication<Dune::MPIHelper::MPICommunicator>>
class Dumux::MultiDomainNewtonSolver< Assembler, LinearSolver, CouplingManager, Reassembler, Comm >

Newton sover for coupled problems.

Public Types
using	Communication = Dune::Communication< Dune::MPIHelper::MPICommunicator >

using	Assembler = Assembler
	export the assembler and linear solver types More...

using	LinearSolver = LinearSolver

using	Variables = Detail::AssemblerVariables< Assembler >
	export the type of variables that represent a numerical solution More...

Public Member Functions
	MultiDomainNewtonSolver (std::shared_ptr< Assembler > assembler, std::shared_ptr< LinearSolver > linearSolver, std::shared_ptr< CouplingManager > couplingManager, const Comm &comm=Dune::MPIHelper::getCommunication(), const std::string &paramGroup="")
	The constructor. More...

void	newtonBeginStep (const Variables &varsCurrentIter) override
	Indicates the beginning of a Newton iteration. More...

void	newtonBegin (Variables &vars) override
	Called before the Newton method is applied to an non-linear system of equations. More...

bool	newtonConverged () const override
	Returns true if the error of the solution is below the tolerance. More...

void	newtonEndStep (Variables &varsCurrentIter, const SolutionVector &uLastIter) override
	Indicates that one Newton iteration was finished. More...

const Communication &	comm () const
	the communicator for parallel runs More...

void	setMaxRelativeShift (Scalar tolerance)
	Set the maximum acceptable difference of any primary variable between two iterations for declaring convergence. More...

void	setMaxAbsoluteResidual (Scalar tolerance)
	Set the maximum acceptable absolute residual for declaring convergence. More...

void	setResidualReduction (Scalar tolerance)
	Set the maximum acceptable residual norm reduction. More...

void	setTargetSteps (int targetSteps)
	Set the number of iterations at which the Newton method should aim at. More...

void	setMinSteps (int minSteps)
	Set the number of minimum iterations for the Newton method. More...

void	setMaxSteps (int maxSteps)
	Set the number of iterations after which the Newton method gives up. More...

void	solve (Variables &vars, TimeLoop &timeLoop) override
	Run the Newton method to solve a non-linear system. Does time step control when the Newton fails to converge. More...

void	solve (Variables &vars) override
	Run the Newton method to solve a non-linear system. The solver is responsible for all the strategic decisions. More...

virtual bool	newtonProceed (const Variables &varsCurrentIter, bool converged)
	Returns true if another iteration should be done. More...

virtual void	assembleLinearSystem (const Variables &vars)
	Assemble the linear system of equations \(\mathbf{A}x - b = 0\). More...

void	solveLinearSystem (SolutionVector &deltaU)
	Solve the linear system of equations \(\mathbf{A}x - b = 0\). More...

void	newtonUpdate (Variables &vars, const SolutionVector &uLastIter, const SolutionVector &deltaU)
	Update the current solution with a delta vector. More...

virtual void	newtonEnd ()
	Called if the Newton method ended (not known yet if we failed or succeeded) More...

virtual void	newtonFail (Variables &u)
	Called if the Newton method broke down. This method is called after newtonEnd() More...

virtual void	newtonSucceed ()
	Called if the Newton method ended successfully This method is called after newtonEnd() More...

void	report (std::ostream &sout=std::cout) const
	output statistics / report More...

void	resetReport ()
	reset the statistics More...

void	reportParams (std::ostream &sout=std::cout) const
	Report the options and parameters this Newton is configured with. More...

Scalar	suggestTimeStepSize (Scalar oldTimeStep) const
	Suggest a new time-step size based on the old time-step size. More...

void	setVerbosity (int val)
	Specifies the verbosity level. More...

int	verbosity () const
	Return the verbosity level. More...

const std::string &	paramGroup () const
	Returns the parameter group. More...

void	attachConvergenceWriter (std::shared_ptr< ConvergenceWriter > convWriter)
	Attach a convergence writer to write out intermediate results after each iteration. More...

void	detachConvergenceWriter ()
	Detach the convergence writer to stop the output. More...

Scalar	retryTimeStepReductionFactor () const
	Return the factor for reducing the time step after a Newton iteration has failed. More...

void	setRetryTimeStepReductionFactor (const Scalar factor)
	Set the factor for reducing the time step after a Newton iteration has failed. More...

const Assembler &	assembler () const
	Access the assembler. More...

Assembler &	assembler ()
	Access the assembler. More...

const LinearSolver &	linearSolver () const
	Access the linear solver. More...

Protected Member Functions
void	solutionChanged_ (Variables &vars, const SolutionVector &uCurrentIter) override
	Update solution-depended quantities like grid variables after the solution has changed. More...

void	computeResidualReduction_ (const Variables &vars)

bool	enableResidualCriterion () const

LinearSolver &	linearSolver ()
	Access the linear solver. More...

bool	checkSizesOfSubMatrices (const Dune::MultiTypeBlockMatrix< FirstRow, Args... > &matrix) const
	Helper function to assure the MultiTypeBlockMatrix's sub-blocks have the correct sizes. More...

Protected Attributes
int	targetSteps_
	optimal number of iterations we want to achieve More...

int	minSteps_
	minimum number of iterations we do More...

int	maxSteps_
	maximum number of iterations we do before giving up More...

int	numSteps_
	actual number of steps done so far More...

Scalar	reduction_

Scalar	residualNorm_

Scalar	lastReduction_

Scalar	initialResidual_

Scalar	shift_

Scalar	lastShift_

std::ostringstream	endIterMsgStream_
	message stream to be displayed at the end of iterations More...

Member Typedef Documentation

◆ Assembler

using Dumux::PDESolver< Assembler , LinearSolver >::Assembler = Assembler

inherited

export the assembler and linear solver types

◆ Communication

using Dumux::NewtonSolver< Assembler, LinearSolver, DefaultPartialReassembler , Dune::Communication< Dune::MPIHelper::MPICommunicator > >::Communication = Dune::Communication< Dune::MPIHelper::MPICommunicator >

inherited

◆ LinearSolver

using Dumux::PDESolver< Assembler , LinearSolver >::LinearSolver = LinearSolver

inherited

◆ Variables

using Dumux::PDESolver< Assembler , LinearSolver >::Variables = Detail::AssemblerVariables<Assembler>

inherited

export the type of variables that represent a numerical solution

Constructor & Destructor Documentation

◆ MultiDomainNewtonSolver()

template<class Assembler , class LinearSolver , class CouplingManager , class Reassembler = DefaultPartialReassembler, class Comm = Dune::Communication<Dune::MPIHelper::MPICommunicator>>

Dumux::MultiDomainNewtonSolver< Assembler, LinearSolver, CouplingManager, Reassembler, Comm >::MultiDomainNewtonSolver	(	std::shared_ptr< Assembler >	assembler,
		std::shared_ptr< LinearSolver >	linearSolver,
		std::shared_ptr< CouplingManager >	couplingManager,
		const Comm &	comm = `Dune::MPIHelper::getCommunication()`,
		const std::string &	paramGroup = `""`
	)

inline

The constructor.

Member Function Documentation

◆ assembleLinearSystem()

virtual void Dumux::NewtonSolver< Assembler, LinearSolver, DefaultPartialReassembler , Dune::Communication< Dune::MPIHelper::MPICommunicator > >::assembleLinearSystem ( const Variables & vars )

inlinevirtualinherited

Assemble the linear system of equations \(\mathbf{A}x - b = 0\).

Parameters

vars	The current iteration's variables

◆ assembler() [1/2]

Assembler & Dumux::PDESolver< Assembler , LinearSolver >::assembler ( )

inlineinherited

Access the assembler.

◆ assembler() [2/2]

const Assembler & Dumux::PDESolver< Assembler , LinearSolver >::assembler ( ) const

inlineinherited

Access the assembler.

◆ attachConvergenceWriter()

void Dumux::NewtonSolver< Assembler, LinearSolver, DefaultPartialReassembler , Dune::Communication< Dune::MPIHelper::MPICommunicator > >::attachConvergenceWriter ( std::shared_ptr< ConvergenceWriter > convWriter )

inlineinherited

Attach a convergence writer to write out intermediate results after each iteration.

◆ checkSizesOfSubMatrices()

bool Dumux::PDESolver< Assembler , LinearSolver >::checkSizesOfSubMatrices ( const Dune::MultiTypeBlockMatrix< FirstRow, Args... > & matrix ) const

inlineprotectedinherited

Helper function to assure the MultiTypeBlockMatrix's sub-blocks have the correct sizes.

◆ comm()

const Communication & Dumux::NewtonSolver< Assembler, LinearSolver, DefaultPartialReassembler , Dune::Communication< Dune::MPIHelper::MPICommunicator > >::comm ( ) const

inlineinherited

the communicator for parallel runs

◆ computeResidualReduction_()

void Dumux::NewtonSolver< Assembler, LinearSolver, DefaultPartialReassembler , Dune::Communication< Dune::MPIHelper::MPICommunicator > >::computeResidualReduction_ ( const Variables & vars )

inlineprotectedinherited

◆ detachConvergenceWriter()

void Dumux::NewtonSolver< Assembler, LinearSolver, DefaultPartialReassembler , Dune::Communication< Dune::MPIHelper::MPICommunicator > >::detachConvergenceWriter ( )

inlineinherited

Detach the convergence writer to stop the output.

◆ enableResidualCriterion()

bool Dumux::NewtonSolver< Assembler, LinearSolver, DefaultPartialReassembler , Dune::Communication< Dune::MPIHelper::MPICommunicator > >::enableResidualCriterion ( ) const

inlineprotectedinherited

◆ linearSolver() [1/2]

LinearSolver & Dumux::PDESolver< Assembler , LinearSolver >::linearSolver ( )

inlineprotectedinherited

Access the linear solver.

◆ linearSolver() [2/2]

const LinearSolver & Dumux::PDESolver< Assembler , LinearSolver >::linearSolver ( ) const

inlineinherited

Access the linear solver.

◆ newtonBegin()

template<class Assembler , class LinearSolver , class CouplingManager , class Reassembler = DefaultPartialReassembler, class Comm = Dune::Communication<Dune::MPIHelper::MPICommunicator>>

void Dumux::MultiDomainNewtonSolver< Assembler, LinearSolver, CouplingManager, Reassembler, Comm >::newtonBegin ( Variables & vars )

inlineoverridevirtual

Called before the Newton method is applied to an non-linear system of equations.

Parameters

vars	The variables representing the initial solution

Reimplemented from Dumux::NewtonSolver< Assembler, LinearSolver, DefaultPartialReassembler, Dune::Communication< Dune::MPIHelper::MPICommunicator > >.

◆ newtonBeginStep()

template<class Assembler , class LinearSolver , class CouplingManager , class Reassembler = DefaultPartialReassembler, class Comm = Dune::Communication<Dune::MPIHelper::MPICommunicator>>

void Dumux::MultiDomainNewtonSolver< Assembler, LinearSolver, CouplingManager, Reassembler, Comm >::newtonBeginStep ( const Variables & varsCurrentIter )

inlineoverridevirtual

Indicates the beginning of a Newton iteration.

Reimplemented from Dumux::NewtonSolver< Assembler, LinearSolver, DefaultPartialReassembler, Dune::Communication< Dune::MPIHelper::MPICommunicator > >.

◆ newtonConverged()

template<class Assembler , class LinearSolver , class CouplingManager , class Reassembler = DefaultPartialReassembler, class Comm = Dune::Communication<Dune::MPIHelper::MPICommunicator>>

bool Dumux::MultiDomainNewtonSolver< Assembler, LinearSolver, CouplingManager, Reassembler, Comm >::newtonConverged ( ) const

inlineoverridevirtual

Returns true if the error of the solution is below the tolerance.

Reimplemented from Dumux::NewtonSolver< Assembler, LinearSolver, DefaultPartialReassembler, Dune::Communication< Dune::MPIHelper::MPICommunicator > >.

◆ newtonEnd()

virtual void Dumux::NewtonSolver< Assembler, LinearSolver, DefaultPartialReassembler , Dune::Communication< Dune::MPIHelper::MPICommunicator > >::newtonEnd ( )

inlinevirtualinherited

Called if the Newton method ended (not known yet if we failed or succeeded)

◆ newtonEndStep()

template<class Assembler , class LinearSolver , class CouplingManager , class Reassembler = DefaultPartialReassembler, class Comm = Dune::Communication<Dune::MPIHelper::MPICommunicator>>

void Dumux::MultiDomainNewtonSolver< Assembler, LinearSolver, CouplingManager, Reassembler, Comm >::newtonEndStep	(	Variables &	varsCurrentIter,
		const SolutionVector &	uLastIter
	)

inlineoverridevirtual

Indicates that one Newton iteration was finished.

Parameters

varsCurrentIter	The variables after the current Newton iteration
uLastIter	The solution at the beginning of the current Newton iteration

Reimplemented from Dumux::NewtonSolver< Assembler, LinearSolver, DefaultPartialReassembler, Dune::Communication< Dune::MPIHelper::MPICommunicator > >.

◆ newtonFail()

virtual void Dumux::NewtonSolver< Assembler, LinearSolver, DefaultPartialReassembler , Dune::Communication< Dune::MPIHelper::MPICommunicator > >::newtonFail ( Variables & u )

inlinevirtualinherited

Called if the Newton method broke down. This method is called after newtonEnd()

◆ newtonProceed()

virtual bool Dumux::NewtonSolver< Assembler, LinearSolver, DefaultPartialReassembler , Dune::Communication< Dune::MPIHelper::MPICommunicator > >::newtonProceed	(	const Variables &	varsCurrentIter,
		bool	converged
	)

inlinevirtualinherited

Returns true if another iteration should be done.

Parameters

varsCurrentIter	The variables of the current Newton iteration
converged	if the Newton method's convergence criterion was met in this step

◆ newtonSucceed()

virtual void Dumux::NewtonSolver< Assembler, LinearSolver, DefaultPartialReassembler , Dune::Communication< Dune::MPIHelper::MPICommunicator > >::newtonSucceed ( )

inlinevirtualinherited

Called if the Newton method ended successfully This method is called after newtonEnd()

◆ newtonUpdate()

void Dumux::NewtonSolver< Assembler, LinearSolver, DefaultPartialReassembler , Dune::Communication< Dune::MPIHelper::MPICommunicator > >::newtonUpdate	(	Variables &	vars,
		const SolutionVector &	uLastIter,
		const SolutionVector &	deltaU
	)

inlineinherited

Update the current solution with a delta vector.

The error estimates required for the newtonConverged() and newtonProceed() methods should be updated inside this method.

Different update strategies, such as line search and chopped updates can be implemented. The default behavior is just to subtract deltaU from uLastIter, i.e.

\[ u^{k+1} = u^k - \Delta u^k \]

Parameters

vars	The variables after the current iteration
uLastIter	The solution vector after the last iteration
deltaU	The delta as calculated from solving the linear system of equations. This parameter also stores the updated solution.

◆ paramGroup()

const std::string & Dumux::NewtonSolver< Assembler, LinearSolver, DefaultPartialReassembler , Dune::Communication< Dune::MPIHelper::MPICommunicator > >::paramGroup ( ) const

inlineinherited

Returns the parameter group.

◆ report()

void Dumux::NewtonSolver< Assembler, LinearSolver, DefaultPartialReassembler , Dune::Communication< Dune::MPIHelper::MPICommunicator > >::report ( std::ostream & sout = std::cout ) const

inlineinherited

output statistics / report

◆ reportParams()

void Dumux::NewtonSolver< Assembler, LinearSolver, DefaultPartialReassembler , Dune::Communication< Dune::MPIHelper::MPICommunicator > >::reportParams ( std::ostream & sout = std::cout ) const

inlineinherited

Report the options and parameters this Newton is configured with.

◆ resetReport()

void Dumux::NewtonSolver< Assembler, LinearSolver, DefaultPartialReassembler , Dune::Communication< Dune::MPIHelper::MPICommunicator > >::resetReport ( )

inlineinherited

reset the statistics

◆ retryTimeStepReductionFactor()

Scalar Dumux::NewtonSolver< Assembler, LinearSolver, DefaultPartialReassembler , Dune::Communication< Dune::MPIHelper::MPICommunicator > >::retryTimeStepReductionFactor ( ) const

inlineinherited

Return the factor for reducing the time step after a Newton iteration has failed.

◆ setMaxAbsoluteResidual()

void Dumux::NewtonSolver< Assembler, LinearSolver, DefaultPartialReassembler , Dune::Communication< Dune::MPIHelper::MPICommunicator > >::setMaxAbsoluteResidual ( Scalar tolerance )

inlineinherited

Set the maximum acceptable absolute residual for declaring convergence.

Parameters

tolerance The maximum absolute residual at which the scheme is considered finished

◆ setMaxRelativeShift()

void Dumux::NewtonSolver< Assembler, LinearSolver, DefaultPartialReassembler , Dune::Communication< Dune::MPIHelper::MPICommunicator > >::setMaxRelativeShift ( Scalar tolerance )

inlineinherited

Set the maximum acceptable difference of any primary variable between two iterations for declaring convergence.

Parameters

tolerance The maximum relative shift between two Newton iterations at which the scheme is considered finished

◆ setMaxSteps()

void Dumux::NewtonSolver< Assembler, LinearSolver, DefaultPartialReassembler , Dune::Communication< Dune::MPIHelper::MPICommunicator > >::setMaxSteps ( int maxSteps )

inlineinherited

Set the number of iterations after which the Newton method gives up.

Parameters

maxSteps Number of iterations after we give up

◆ setMinSteps()

void Dumux::NewtonSolver< Assembler, LinearSolver, DefaultPartialReassembler , Dune::Communication< Dune::MPIHelper::MPICommunicator > >::setMinSteps ( int minSteps )

inlineinherited

Set the number of minimum iterations for the Newton method.

Parameters

minSteps Minimum number of iterations

◆ setResidualReduction()

void Dumux::NewtonSolver< Assembler, LinearSolver, DefaultPartialReassembler , Dune::Communication< Dune::MPIHelper::MPICommunicator > >::setResidualReduction ( Scalar tolerance )

inlineinherited

Set the maximum acceptable residual norm reduction.

Parameters

tolerance The maximum reduction of the residual norm at which the scheme is considered finished

◆ setRetryTimeStepReductionFactor()

void Dumux::NewtonSolver< Assembler, LinearSolver, DefaultPartialReassembler , Dune::Communication< Dune::MPIHelper::MPICommunicator > >::setRetryTimeStepReductionFactor ( const Scalar factor )

inlineinherited

Set the factor for reducing the time step after a Newton iteration has failed.

◆ setTargetSteps()

void Dumux::NewtonSolver< Assembler, LinearSolver, DefaultPartialReassembler , Dune::Communication< Dune::MPIHelper::MPICommunicator > >::setTargetSteps ( int targetSteps )

inlineinherited

Set the number of iterations at which the Newton method should aim at.

This is used to control the time-step size. The heuristic used is to scale the last time-step size by the deviation of the number of iterations used from the target steps.

Parameters

targetSteps Number of iterations which are considered "optimal"

◆ setVerbosity()

void Dumux::NewtonSolver< Assembler, LinearSolver, DefaultPartialReassembler , Dune::Communication< Dune::MPIHelper::MPICommunicator > >::setVerbosity ( int val )

inlineinherited

Specifies the verbosity level.

◆ solutionChanged_()

template<class Assembler , class LinearSolver , class CouplingManager , class Reassembler = DefaultPartialReassembler, class Comm = Dune::Communication<Dune::MPIHelper::MPICommunicator>>

void Dumux::MultiDomainNewtonSolver< Assembler, LinearSolver, CouplingManager, Reassembler, Comm >::solutionChanged_	(	Variables &	vars,
		const SolutionVector &	uCurrentIter
	)

inlineoverrideprotectedvirtual

Update solution-depended quantities like grid variables after the solution has changed.

Reimplemented from Dumux::NewtonSolver< Assembler, LinearSolver, DefaultPartialReassembler, Dune::Communication< Dune::MPIHelper::MPICommunicator > >.

◆ solve() [1/2]

void Dumux::NewtonSolver< Assembler, LinearSolver, DefaultPartialReassembler , Dune::Communication< Dune::MPIHelper::MPICommunicator > >::solve ( Variables & vars )

inlineoverridevirtualinherited

Run the Newton method to solve a non-linear system. The solver is responsible for all the strategic decisions.

Parameters

vars	The variables object representing the current state of the numerical solution (primary and possibly secondary variables).

Implements Dumux::PDESolver< Assembler, LinearSolver >.

◆ solve() [2/2]

void Dumux::NewtonSolver< Assembler, LinearSolver, DefaultPartialReassembler , Dune::Communication< Dune::MPIHelper::MPICommunicator > >::solve	(	Variables &	vars,
		TimeLoop &	timeLoop
	)

inlineoverridevirtualinherited

Run the Newton method to solve a non-linear system. Does time step control when the Newton fails to converge.

Parameters

vars	The variables object representing the current state of the numerical solution (primary and possibly secondary variables).
timeLoop	The time loop.

Reimplemented from Dumux::PDESolver< Assembler, LinearSolver >.

◆ solveLinearSystem()

void Dumux::NewtonSolver< Assembler, LinearSolver, DefaultPartialReassembler , Dune::Communication< Dune::MPIHelper::MPICommunicator > >::solveLinearSystem ( SolutionVector & deltaU )

inlineinherited

Solve the linear system of equations \(\mathbf{A}x - b = 0\).

Throws Dumux::NumericalProblem if the linear solver didn't converge.

If the linear solver doesn't accept multitype matrices we copy the matrix into a 1x1 block BCRS matrix for solving.

Parameters

deltaU The difference between the current and the next solution

◆ suggestTimeStepSize()

Scalar Dumux::NewtonSolver< Assembler, LinearSolver, DefaultPartialReassembler , Dune::Communication< Dune::MPIHelper::MPICommunicator > >::suggestTimeStepSize ( Scalar oldTimeStep ) const

inlineinherited

Suggest a new time-step size based on the old time-step size.

The default behavior is to suggest the old time-step size scaled by the ratio between the target iterations and the iterations required to actually solve the last time-step.

◆ verbosity()

int Dumux::NewtonSolver< Assembler, LinearSolver, DefaultPartialReassembler , Dune::Communication< Dune::MPIHelper::MPICommunicator > >::verbosity ( ) const

inlineinherited

Return the verbosity level.

Member Data Documentation

◆ endIterMsgStream_

std::ostringstream Dumux::NewtonSolver< Assembler, LinearSolver, DefaultPartialReassembler , Dune::Communication< Dune::MPIHelper::MPICommunicator > >::endIterMsgStream_

protectedinherited

message stream to be displayed at the end of iterations

◆ initialResidual_

Scalar Dumux::NewtonSolver< Assembler, LinearSolver, DefaultPartialReassembler , Dune::Communication< Dune::MPIHelper::MPICommunicator > >::initialResidual_

protectedinherited

◆ lastReduction_

Scalar Dumux::NewtonSolver< Assembler, LinearSolver, DefaultPartialReassembler , Dune::Communication< Dune::MPIHelper::MPICommunicator > >::lastReduction_

protectedinherited

◆ lastShift_

Scalar Dumux::NewtonSolver< Assembler, LinearSolver, DefaultPartialReassembler , Dune::Communication< Dune::MPIHelper::MPICommunicator > >::lastShift_

protectedinherited

◆ maxSteps_

int Dumux::NewtonSolver< Assembler, LinearSolver, DefaultPartialReassembler , Dune::Communication< Dune::MPIHelper::MPICommunicator > >::maxSteps_

protectedinherited

maximum number of iterations we do before giving up

◆ minSteps_

int Dumux::NewtonSolver< Assembler, LinearSolver, DefaultPartialReassembler , Dune::Communication< Dune::MPIHelper::MPICommunicator > >::minSteps_

protectedinherited

minimum number of iterations we do

◆ numSteps_

int Dumux::NewtonSolver< Assembler, LinearSolver, DefaultPartialReassembler , Dune::Communication< Dune::MPIHelper::MPICommunicator > >::numSteps_

protectedinherited

actual number of steps done so far

◆ reduction_

Scalar Dumux::NewtonSolver< Assembler, LinearSolver, DefaultPartialReassembler , Dune::Communication< Dune::MPIHelper::MPICommunicator > >::reduction_

protectedinherited

◆ residualNorm_

Scalar Dumux::NewtonSolver< Assembler, LinearSolver, DefaultPartialReassembler , Dune::Communication< Dune::MPIHelper::MPICommunicator > >::residualNorm_

protectedinherited

◆ shift_

Scalar Dumux::NewtonSolver< Assembler, LinearSolver, DefaultPartialReassembler , Dune::Communication< Dune::MPIHelper::MPICommunicator > >::shift_

protectedinherited

◆ targetSteps_

int Dumux::NewtonSolver< Assembler, LinearSolver, DefaultPartialReassembler , Dune::Communication< Dune::MPIHelper::MPICommunicator > >::targetSteps_

protectedinherited

optimal number of iterations we want to achieve

The documentation for this class was generated from the following file:

multidomain/newtonsolver.hh

Description

Public Types

Public Member Functions

Protected Member Functions

Protected Attributes

Member Typedef Documentation

◆ Assembler

◆ Communication

◆ LinearSolver

◆ Variables

Constructor & Destructor Documentation

◆ MultiDomainNewtonSolver()

Member Function Documentation

◆ assembleLinearSystem()

◆ assembler() [1/2]

◆ assembler() [2/2]

◆ attachConvergenceWriter()

◆ checkSizesOfSubMatrices()

◆ comm()

◆ computeResidualReduction_()

◆ detachConvergenceWriter()

◆ enableResidualCriterion()

◆ linearSolver() [1/2]

◆ linearSolver() [2/2]

◆ newtonBegin()

◆ newtonBeginStep()

◆ newtonConverged()

◆ newtonEnd()

◆ newtonEndStep()

◆ newtonFail()

◆ newtonProceed()

◆ newtonSucceed()

◆ newtonUpdate()

◆ paramGroup()

◆ report()

◆ reportParams()

◆ resetReport()

◆ retryTimeStepReductionFactor()

◆ setMaxAbsoluteResidual()

◆ setMaxRelativeShift()

◆ setMaxSteps()

◆ setMinSteps()

◆ setResidualReduction()

◆ setRetryTimeStepReductionFactor()

◆ setTargetSteps()

◆ setVerbosity()

◆ solutionChanged_()

◆ solve() [1/2]

◆ solve() [2/2]

◆ solveLinearSystem()

◆ suggestTimeStepSize()

◆ verbosity()

Member Data Documentation

◆ endIterMsgStream_

◆ initialResidual_

◆ lastReduction_

◆ lastShift_

◆ maxSteps_

◆ minSteps_

◆ numSteps_

◆ reduction_

◆ residualNorm_

◆ shift_

◆ targetSteps_