Base class for all staggered finite-volume problems. More...

#include <dumux/common/staggeredfvproblem.hh>

Inheritance diagram for Dumux::StaggeredFVProblem< TypeTag >:

Description

template<class TypeTag>
class Dumux::StaggeredFVProblem< TypeTag >

Base class for all staggered finite-volume problems.

Note: All quantities (regarding the units) are specified assuming a three-dimensional world. Problems discretized using 2D grids are assumed to be extruded by \(1 m\) and 1D grids are assumed to have a cross section of \(1m \times 1m\).

Public Types
using	SpatialParams = GetPropType< TypeTag, Properties::SpatialParams >

Public Member Functions
	StaggeredFVProblem (std::shared_ptr< const GridGeometry > gridGeometry, const std::string &paramGroup="")
	Constructor. More...

bool	isDirichletCell (const Element &element, const FVElementGeometry &fvGeometry, const SubControlVolume &scv, int pvIdx) const
	Returns whether a fixed Dirichlet value shall be used at a given cell. More...

template<class ElementVolumeVariables , class ElementFaceVariables , class Entity >
NumEqVector	source (const Element &element, const FVElementGeometry &fvGeometry, const ElementVolumeVariables &elemVolVars, const ElementFaceVariables &elementFaceVars, const Entity &e) const
	Evaluate the source term for all phases within a given sub-control-volume (-face). More...

NumEqVector	neumann (const Element &element, const FVElementGeometry &fvGeometry, const ElementVolumeVariables &elemVolVars, const ElementFaceVariables &elemFaceVars, const SubControlVolumeFace &scvf) const
	Evaluate the boundary conditions for a neumann boundary segment. More...

template<class Entity >
PrimaryVariables	initial (const Entity &entity) const
	Evaluate the initial value for an element (for cell-centered primary variables) or face (for velocities) More...

template<class SolutionVector >
void	applyInitialSolution (SolutionVector &sol) const
	Applies the initial solution for all degrees of freedom of the grid. More...

template<class SolutionVector >
void	applyInitialCellCenterSolution (SolutionVector &sol, const SubControlVolume &scv, const PrimaryVariables &initSol) const
	Applys the initial cell center solution. More...

template<class SolutionVector >
void	applyInitialFaceSolution (SolutionVector &sol, const SubControlVolumeFace &scvf, const PrimaryVariables &initSol) const
	Applys the initial face solution. More...

const SpatialParams &	spatialParams () const
	Return a reference to the underlying spatial parameters. More...

SpatialParams &	spatialParams ()
	Return a reference to the underlying spatial parameters. More...

const std::string &	name () const
	The problem name. More...

void	setName (const std::string &newName)
	Set the problem name. More...

Boundary conditions and sources defining the problem
auto	boundaryTypes (const Element &element, const SubControlVolume &scv) const
	Specifies which kind of boundary condition should be used for which equation on a given boundary segment. More...

auto	boundaryTypes (const Element &element, const SubControlVolumeFace &scvf) const
	Specifies which kind of boundary condition should be used for which equation on a given boundary segment. More...

BoundaryTypes	boundaryTypesAtPos (const GlobalPosition &globalPos) const
	Specifies which kind of boundary condition should be used for which equation on a given boundary segment. More...

PrimaryVariables	dirichlet (const Element &element, const SubControlVolumeFace &scvf) const
	Evaluate the boundary conditions for a dirichlet control volume face. More...

PrimaryVariables	dirichlet (const Element &element, const SubControlVolume &scv) const
	Evaluate the boundary conditions for a dirichlet control volume. More...

PrimaryVariables	dirichletAtPos (const GlobalPosition &globalPos) const
	Evaluate the boundary conditions for a dirichlet control volume. More...

template<class ElementVolumeVariables , class ElementFluxVariablesCache >
NumEqVector	neumann (const Element &element, const FVElementGeometry &fvGeometry, const ElementVolumeVariables &elemVolVars, const ElementFluxVariablesCache &elemFluxVarsCache, const SubControlVolumeFace &scvf) const
	Evaluate the boundary conditions for a neumann boundary segment. More...

NumEqVector	neumannAtPos (const GlobalPosition &globalPos) const
	Evaluate the boundary conditions for a neumann boundary segment. More...

template<class ElementVolumeVariables >
NumEqVector	source (const Element &element, const FVElementGeometry &fvGeometry, const ElementVolumeVariables &elemVolVars, const SubControlVolume &scv) const
	Evaluate the source term for all phases within a given sub-control-volume. More...

NumEqVector	sourceAtPos (const GlobalPosition &globalPos) const
	Evaluate the source term for all phases within a given sub-control-volume. More...

void	addPointSources (std::vector< PointSource > &pointSources) const
	Applies a vector of point sources. The point sources are possibly solution dependent. More...

template<class ElementVolumeVariables >
void	pointSource (PointSource &source, const Element &element, const FVElementGeometry &fvGeometry, const ElementVolumeVariables &elemVolVars, const SubControlVolume &scv) const
	Evaluate the point sources (added by addPointSources) for all phases within a given sub-control-volume. More...

void	pointSourceAtPos (PointSource &pointSource, const GlobalPosition &globalPos) const
	Evaluate the point sources (added by addPointSources) for all phases within a given sub-control-volume. More...

template<class MatrixBlock , class VolumeVariables >
void	addSourceDerivatives (MatrixBlock &block, const Element &element, const FVElementGeometry &fvGeometry, const VolumeVariables &volVars, const SubControlVolume &scv) const
	Add source term derivative to the Jacobian. More...

template<class ElementVolumeVariables >
NumEqVector	scvPointSources (const Element &element, const FVElementGeometry &fvGeometry, const ElementVolumeVariables &elemVolVars, const SubControlVolume &scv) const
	Adds contribution of point sources for a specific sub control volume to the values. Caution: Only overload this method in the implementation if you know what you are doing. More...

void	computePointSourceMap ()
	Compute the point source map, i.e. which scvs have point source contributions. More...

const PointSourceMap &	pointSourceMap () const
	Get the point source map. It stores the point sources per scv. More...

PrimaryVariables	initialAtPos (const GlobalPosition &globalPos) const
	Evaluate the initial value for a control volume. More...

template<class ElementSolution >
Scalar	extrusionFactor (const Element &element, const SubControlVolume &scv, const ElementSolution &elemSol, double defaultValue=1.0) const
	Return how much the domain is extruded at a given sub-control volume. More...

Scalar	extrusionFactorAtPos (const GlobalPosition &globalPos, double defaultValue=1.0) const
	Return how much the domain is extruded at a given position. More...

const GridGeometry &	gridGeometry () const
	The finite volume grid geometry. More...

const std::string &	paramGroup () const
	The parameter group in which to retrieve runtime parameters. More...

static constexpr bool	enableInternalDirichletConstraints ()
	If internal Dirichlet contraints are enabled Enables / disables internal (non-boundary) Dirichlet constraints. If this is overloaded to return true, the assembler calls problem.hasInternalDirichletConstraint(element, scv). This means you have to implement the following member function. More...

Implementation &	asImp_ ()
	Returns the implementation of the problem (i.e. static polymorphism) More...

const Implementation &	asImp_ () const
	Returns the implementation of the problem (i.e. static polymorphism) More...

Member Typedef Documentation

◆ SpatialParams

template<class TypeTag >

using Dumux::FVProblemWithSpatialParams< TypeTag >::SpatialParams = GetPropType<TypeTag, Properties::SpatialParams>

inherited

Constructor & Destructor Documentation

◆ StaggeredFVProblem()

template<class TypeTag >

Dumux::StaggeredFVProblem< TypeTag >::StaggeredFVProblem	(	std::shared_ptr< const GridGeometry >	gridGeometry,
		const std::string &	paramGroup = `""`
	)

inline

Constructor.

Parameters

gridGeometry	The finite volume grid geometry
paramGroup	The parameter group in which to look for runtime parameters first (default is "")

Member Function Documentation

◆ addPointSources()

template<class TypeTag >

void Dumux::FVProblem< TypeTag >::addPointSources ( std::vector< PointSource > & pointSources ) const

inlineinherited

Applies a vector of point sources. The point sources are possibly solution dependent.

Parameters

pointSources A vector of PointSource s that contain source values for all phases and space positions.

For this method, the values method of the point source has to return the absolute rate values in units \( [ \textnormal{unit of conserved quantity} / s ] \). Positive values mean that the conserved quantity is created, negative ones mean that it vanishes. E.g. for the mass balance that would be a mass rate in \( [ kg / s ] \).

◆ addSourceDerivatives()

template<class TypeTag >

template<class MatrixBlock , class VolumeVariables >

void Dumux::FVProblem< TypeTag >::addSourceDerivatives	(	MatrixBlock &	block,
		const Element &	element,
		const FVElementGeometry &	fvGeometry,
		const VolumeVariables &	volVars,
		const SubControlVolume &	scv
	)		const

inlineinherited

Add source term derivative to the Jacobian.

Note: Only needed in case of analytic differentiation and solution dependent sources

◆ applyInitialCellCenterSolution()

template<class TypeTag >

template<class SolutionVector >

void Dumux::StaggeredFVProblem< TypeTag >::applyInitialCellCenterSolution	(	SolutionVector &	sol,
		const SubControlVolume &	scv,
		const PrimaryVariables &	initSol
	)		const

inline

Applys the initial cell center solution.

◆ applyInitialFaceSolution()

template<class TypeTag >

template<class SolutionVector >

void Dumux::StaggeredFVProblem< TypeTag >::applyInitialFaceSolution	(	SolutionVector &	sol,
		const SubControlVolumeFace &	scvf,
		const PrimaryVariables &	initSol
	)		const

inline

Applys the initial face solution.

◆ applyInitialSolution()

template<class TypeTag >

template<class SolutionVector >

void Dumux::StaggeredFVProblem< TypeTag >::applyInitialSolution ( SolutionVector & sol ) const

inline

Applies the initial solution for all degrees of freedom of the grid.

◆ asImp_() [1/2]

template<class TypeTag >

Implementation & Dumux::FVProblem< TypeTag >::asImp_ ( )

inlineprotectedinherited

Returns the implementation of the problem (i.e. static polymorphism)

◆ asImp_() [2/2]

template<class TypeTag >

const Implementation & Dumux::FVProblem< TypeTag >::asImp_ ( ) const

inlineprotectedinherited

Returns the implementation of the problem (i.e. static polymorphism)

◆ boundaryTypes() [1/2]

template<class TypeTag >

auto Dumux::FVProblem< TypeTag >::boundaryTypes	(	const Element &	element,
		const SubControlVolume &	scv
	)		const

inlineinherited

Specifies which kind of boundary condition should be used for which equation on a given boundary segment.

Parameters

element	The finite element
scv	The sub control volume

◆ boundaryTypes() [2/2]

template<class TypeTag >

auto Dumux::FVProblem< TypeTag >::boundaryTypes	(	const Element &	element,
		const SubControlVolumeFace &	scvf
	)		const

inlineinherited

Specifies which kind of boundary condition should be used for which equation on a given boundary segment.

Parameters

element	The finite element
scvf	The sub control volume face

◆ boundaryTypesAtPos()

template<class TypeTag >

BoundaryTypes Dumux::FVProblem< TypeTag >::boundaryTypesAtPos ( const GlobalPosition & globalPos ) const

inlineinherited

Specifies which kind of boundary condition should be used for which equation on a given boundary segment.

Parameters

globalPos The position of the finite volume in global coordinates

As a default, i.e. if the user's problem does not overload any boundaryTypes method set Dirichlet boundary conditions everywhere for all primary variables

◆ computePointSourceMap()

template<class TypeTag >

void Dumux::FVProblem< TypeTag >::computePointSourceMap ( )

inlineinherited

Compute the point source map, i.e. which scvs have point source contributions.

Note: Call this on the problem before assembly if you want to enable point sources set via the addPointSources member function.

◆ dirichlet() [1/2]

template<class TypeTag >

PrimaryVariables Dumux::FVProblem< TypeTag >::dirichlet	(	const Element &	element,
		const SubControlVolume &	scv
	)		const

inlineinherited

Evaluate the boundary conditions for a dirichlet control volume.

Parameters

element	The finite element
scv	the sub control volume

Note: used for cell-centered discretization schemes

◆ dirichlet() [2/2]

template<class TypeTag >

PrimaryVariables Dumux::FVProblem< TypeTag >::dirichlet	(	const Element &	element,
		const SubControlVolumeFace &	scvf
	)		const

inlineinherited

Evaluate the boundary conditions for a dirichlet control volume face.

Parameters

element	The finite element
scvf	the sub control volume face

Note: used for cell-centered discretization schemes

◆ dirichletAtPos()

template<class TypeTag >

PrimaryVariables Dumux::FVProblem< TypeTag >::dirichletAtPos ( const GlobalPosition & globalPos ) const

inlineinherited

Evaluate the boundary conditions for a dirichlet control volume.

Parameters

globalPos The position of the center of the finite volume for which the dirichlet condition ought to be set in global coordinates

◆ enableInternalDirichletConstraints()

template<class TypeTag >

static constexpr bool Dumux::FVProblem< TypeTag >::enableInternalDirichletConstraints ( )

inlinestaticconstexprinherited

If internal Dirichlet contraints are enabled Enables / disables internal (non-boundary) Dirichlet constraints. If this is overloaded to return true, the assembler calls problem.hasInternalDirichletConstraint(element, scv). This means you have to implement the following member function.

bool hasInternalDirichletConstraint(const Element& element, const SubControlVolume& scv) const;

which returns an indexable container of booleans defining for each equation if the corresponding dof associated with the element/scv pair is constraint. If true is returned for a dof, the assembler calls problem.internalDirichlet(element, scv). This means you have to additionally implement the following member function

PrimaryVariables internalDirichlet(const Element& element, const SubControlVolume& scv) const;

which returns the enforced Dirichlet values the dof associated with the element/scv pair.

◆ extrusionFactor()

template<class TypeTag >

template<class ElementSolution >

Scalar Dumux::FVProblem< TypeTag >::extrusionFactor	(	const Element &	element,
		const SubControlVolume &	scv,
		const ElementSolution &	elemSol,
		double	defaultValue = `1.0`
	)		const

inlineinherited

Return how much the domain is extruded at a given sub-control volume.

This means the factor by which a lower-dimensional (1D or 2D) entity needs to be expanded to get a full dimensional cell. The default is 1.0 which means that 1D problems are actually thought as pipes with a cross section of 1 m^2 and 2D problems are assumed to extend 1 m to the back.

Note: The default value was introduced to make the deprecation phase easier

◆ extrusionFactorAtPos()

template<class TypeTag >

Scalar Dumux::FVProblem< TypeTag >::extrusionFactorAtPos	(	const GlobalPosition &	globalPos,
		double	defaultValue = `1.0`
	)		const

inlineinherited

Return how much the domain is extruded at a given position.

This means the factor by which a lower-dimensional (1D or 2D) entity needs to be expanded to get a full dimensional cell. The default is 1.0 which means that 1D problems are actually thought as pipes with a cross section of 1 m^2 and 2D problems are assumed to extend 1 m to the back.

Note: The default value was introduced to make the deprecation phase easier

◆ gridGeometry()

template<class TypeTag >

const GridGeometry & Dumux::FVProblem< TypeTag >::gridGeometry ( ) const

inlineinherited

The finite volume grid geometry.

◆ initial()

template<class TypeTag >

template<class Entity >

PrimaryVariables Dumux::StaggeredFVProblem< TypeTag >::initial ( const Entity & entity ) const

inline

Evaluate the initial value for an element (for cell-centered primary variables) or face (for velocities)

Parameters

entity The dof entity (element or vertex)

◆ initialAtPos()

template<class TypeTag >

PrimaryVariables Dumux::FVProblem< TypeTag >::initialAtPos ( const GlobalPosition & globalPos ) const

inlineinherited

Evaluate the initial value for a control volume.

Parameters

globalPos The global position

◆ isDirichletCell()

template<class TypeTag >

bool Dumux::StaggeredFVProblem< TypeTag >::isDirichletCell	(	const Element &	element,
		const FVElementGeometry &	fvGeometry,
		const SubControlVolume &	scv,
		int	pvIdx
	)		const

inline

Returns whether a fixed Dirichlet value shall be used at a given cell.

Parameters

element	The finite element
fvGeometry	The finite-volume geometry
scv	The sub control volume
pvIdx	The primary variable index

◆ name()

template<class TypeTag >

const std::string & Dumux::FVProblem< TypeTag >::name ( ) const

inlineinherited

The problem name.

This is used as a prefix for files generated by the simulation. It could be either overwritten by the problem files, or simply declared over the setName() function in the application file.

◆ neumann() [1/2]

template<class TypeTag >

NumEqVector Dumux::StaggeredFVProblem< TypeTag >::neumann	(	const Element &	element,
		const FVElementGeometry &	fvGeometry,
		const ElementVolumeVariables &	elemVolVars,
		const ElementFaceVariables &	elemFaceVars,
		const SubControlVolumeFace &	scvf
	)		const

inline

Evaluate the boundary conditions for a neumann boundary segment.

This is the method for the case where the Neumann condition is potentially solution dependent

Parameters

element	The finite element
fvGeometry	The finite-volume geometry
elemVolVars	All volume variables for the element
elemFaceVars	All face variables for the element
scvf	The sub control volume face

Negative values mean influx. E.g. for the mass balance that would the mass flux in \( [ kg / (m^2 \cdot s)] \).

◆ neumann() [2/2]

template<class TypeTag >

template<class ElementVolumeVariables , class ElementFluxVariablesCache >

NumEqVector Dumux::FVProblem< TypeTag >::neumann	(	const Element &	element,
		const FVElementGeometry &	fvGeometry,
		const ElementVolumeVariables &	elemVolVars,
		const ElementFluxVariablesCache &	elemFluxVarsCache,
		const SubControlVolumeFace &	scvf
	)		const

inlineinherited

Evaluate the boundary conditions for a neumann boundary segment.

This is the method for the case where the Neumann condition is potentially solution dependent

Parameters

element	The finite element
fvGeometry	The finite-volume geometry
elemVolVars	All volume variables for the element
elemFluxVarsCache	Flux variables caches for all faces in stencil
scvf	The sub control volume face

Negative values mean influx. E.g. for the mass balance that would be the mass flux in \( [ kg / (m^2 \cdot s)] \).

◆ neumannAtPos()

template<class TypeTag >

NumEqVector Dumux::FVProblem< TypeTag >::neumannAtPos ( const GlobalPosition & globalPos ) const

inlineinherited

Evaluate the boundary conditions for a neumann boundary segment.

Parameters

globalPos The position of the boundary face's integration point in global coordinates

Negative values mean influx. E.g. for the mass balance that would be the mass flux in \( [ kg / (m^2 \cdot s)] \).

As a default, i.e. if the user's problem does not overload any neumann method return no-flow Neumann boundary conditions at all Neumann boundaries

◆ paramGroup()

template<class TypeTag >

const std::string & Dumux::FVProblem< TypeTag >::paramGroup ( ) const

inlineinherited

The parameter group in which to retrieve runtime parameters.

◆ pointSource()

template<class TypeTag >

template<class ElementVolumeVariables >

void Dumux::FVProblem< TypeTag >::pointSource	(	PointSource &	source,
		const Element &	element,
		const FVElementGeometry &	fvGeometry,
		const ElementVolumeVariables &	elemVolVars,
		const SubControlVolume &	scv
	)		const

inlineinherited

Evaluate the point sources (added by addPointSources) for all phases within a given sub-control-volume.

This is the method for the case where the point source is solution dependent

Parameters

source	A single point source
element	The finite element
fvGeometry	The finite-volume geometry
elemVolVars	All volume variables for the element
scv	The sub control volume

For this method, the values() method of the point sources returns the absolute conserved quantity rate generated or annihilate in units \( [ \textnormal{unit of conserved quantity} / s ] \). Positive values mean that the conserved quantity is created, negative ones mean that it vanishes. E.g. for the mass balance that would be a mass rate in \( [ kg / s ] \).

◆ pointSourceAtPos()

template<class TypeTag >

void Dumux::FVProblem< TypeTag >::pointSourceAtPos	(	PointSource &	pointSource,
		const GlobalPosition &	globalPos
	)		const

inlineinherited

Evaluate the point sources (added by addPointSources) for all phases within a given sub-control-volume.

This is the method for the case where the point source is space dependent

Parameters

pointSource	A single point source
globalPos	The point source position in global coordinates

For this method, the values() method of the point sources returns the absolute conserved quantity rate generated or annihilate in units \( [ \textnormal{unit of conserved quantity} / s ] \). Positive values mean that the conserved quantity is created, negative ones mean that it vanishes. E.g. for the mass balance that would be a mass rate in \( [ kg / s ] \).

◆ pointSourceMap()

template<class TypeTag >

const PointSourceMap & Dumux::FVProblem< TypeTag >::pointSourceMap ( ) const

inlineinherited

Get the point source map. It stores the point sources per scv.

◆ scvPointSources()

template<class TypeTag >

template<class ElementVolumeVariables >

NumEqVector Dumux::FVProblem< TypeTag >::scvPointSources	(	const Element &	element,
		const FVElementGeometry &	fvGeometry,
		const ElementVolumeVariables &	elemVolVars,
		const SubControlVolume &	scv
	)		const

inlineinherited

Adds contribution of point sources for a specific sub control volume to the values. Caution: Only overload this method in the implementation if you know what you are doing.

◆ setName()

template<class TypeTag >

void Dumux::FVProblem< TypeTag >::setName ( const std::string & newName )

inlineinherited

Set the problem name.

This static method sets the simulation name, which should be called before the application problem is declared! If not, the default name "sim" will be used.

Parameters

newName The problem's name

◆ source() [1/2]

template<class TypeTag >

template<class ElementVolumeVariables , class ElementFaceVariables , class Entity >

NumEqVector Dumux::StaggeredFVProblem< TypeTag >::source	(	const Element &	element,
		const FVElementGeometry &	fvGeometry,
		const ElementVolumeVariables &	elemVolVars,
		const ElementFaceVariables &	elementFaceVars,
		const Entity &	e
	)		const

inline

Evaluate the source term for all phases within a given sub-control-volume (-face).

This is the method for the case where the source term is potentially solution dependent and requires some quantities that are specific to the fully-implicit method.

Parameters

element	The finite element
fvGeometry	The finite-volume geometry
elemVolVars	All volume variables for the element
elementFaceVars	All face variables for the element
e	The geometrical entity on which the source shall be applied (scv or scvf)

For this method, the return parameter stores the conserved quantity rate generated or annihilate per volume unit. Positive values mean that the conserved quantity is created, negative ones mean that it vanishes.

◆ source() [2/2]

template<class TypeTag >

template<class ElementVolumeVariables >

NumEqVector Dumux::FVProblem< TypeTag >::source	(	const Element &	element,
		const FVElementGeometry &	fvGeometry,
		const ElementVolumeVariables &	elemVolVars,
		const SubControlVolume &	scv
	)		const

inlineinherited

Evaluate the source term for all phases within a given sub-control-volume.

This is the method for the case where the source term is potentially solution dependent and requires some quantities that are specific to the fully-implicit method.

Parameters

element	The finite element
fvGeometry	The finite-volume geometry
elemVolVars	All volume variables for the element
scv	The sub control volume

For this method, the return parameter stores the conserved quantity rate generated or annihilate per volume unit. Positive values mean that the conserved quantity is created, negative ones mean that it vanishes. E.g. for the mass balance that would be a mass rate in \( [ kg / (m^3 \cdot s)] \).

◆ sourceAtPos()

template<class TypeTag >

NumEqVector Dumux::FVProblem< TypeTag >::sourceAtPos ( const GlobalPosition & globalPos ) const

inlineinherited

Evaluate the source term for all phases within a given sub-control-volume.

Parameters

globalPos The position of the center of the finite volume for which the source term ought to be specified in global coordinates

For this method, the values parameter stores the conserved quantity rate generated or annihilate per volume unit. Positive values mean that the conserved quantity is created, negative ones mean that it vanishes. E.g. for the mass balance that would be a mass rate in \( [ kg / (m^3 \cdot s)] \).

As a default, i.e. if the user's problem does not overload any source method return 0.0 (no source terms)

◆ spatialParams() [1/2]

template<class TypeTag >

SpatialParams & Dumux::FVProblemWithSpatialParams< TypeTag >::spatialParams ( )

inlineinherited

Return a reference to the underlying spatial parameters.

◆ spatialParams() [2/2]

template<class TypeTag >

const SpatialParams & Dumux::FVProblemWithSpatialParams< TypeTag >::spatialParams ( ) const

inlineinherited

Return a reference to the underlying spatial parameters.

The documentation for this class was generated from the following file:

staggeredfvproblem.hh

Description

Public Types

Public Member Functions

Boundary conditions and sources defining the problem

Member Typedef Documentation

◆ SpatialParams

Constructor & Destructor Documentation

◆ StaggeredFVProblem()

Member Function Documentation

◆ addPointSources()

◆ addSourceDerivatives()

◆ applyInitialCellCenterSolution()

◆ applyInitialFaceSolution()

◆ applyInitialSolution()

◆ asImp_() [1/2]

◆ asImp_() [2/2]

◆ boundaryTypes() [1/2]

◆ boundaryTypes() [2/2]

◆ boundaryTypesAtPos()

◆ computePointSourceMap()

◆ dirichlet() [1/2]

◆ dirichlet() [2/2]

◆ dirichletAtPos()

◆ enableInternalDirichletConstraints()

◆ extrusionFactor()

◆ extrusionFactorAtPos()

◆ gridGeometry()

◆ initial()

◆ initialAtPos()

◆ isDirichletCell()

◆ name()

◆ neumann() [1/2]

◆ neumann() [2/2]

◆ neumannAtPos()

◆ paramGroup()

◆ pointSource()

◆ pointSourceAtPos()

◆ pointSourceMap()

◆ scvPointSources()

◆ setName()

◆ source() [1/2]

◆ source() [2/2]

◆ sourceAtPos()

◆ spatialParams() [1/2]

◆ spatialParams() [2/2]