Class for the calculation of 3d velocities from the pressure solution of an IMPES scheme using a grid adaptive MPFA L-method. More...

#include <dumux/porousmediumflow/2p/sequential/diffusion/mpfa/lmethod/3dpressurevelocityadaptive.hh>

Inheritance diagram for Dumux::FvMpfaL3dPressureVelocity2pAdaptive< TypeTag >:

Description

template<class TypeTag>
class Dumux::FvMpfaL3dPressureVelocity2pAdaptive< TypeTag >

Class for the calculation of 3d velocities from the pressure solution of an IMPES scheme using a grid adaptive MPFA L-method.

Can be used for calculating the complete velocity field before the solution of the transport equation (more efficient), or for face-wise velocity calculation directly in the transport solution (less efficient).

Remark1: only for 3-D Hexahedrons of quadrilaterals!

Remark2: Allowed difference in grid levels of two neighboring cells: 1

Template Parameters

TypeTag The problem Type Tag

Public Types
using	TransmissibilityType = typename TransmissibilityCalculator::TransmissibilityType
	Type including methods for calculation of MPFA transmissibilities. More...

Public Member Functions
	FvMpfaL3dPressureVelocity2pAdaptive (Problem &problem)
	Constructs a FvMpfaL3dPressureVelocity2pAdaptive object. More...

void	calculateVelocity ()
	Calculates the velocities at a cell-cell interfaces for the entire simulation grid. More...

void	calculateVelocity (const Intersection &, CellData &)
	Calculates the velocity at a cell-cell interface. More...

void	calculateVelocityOnBoundary (const Intersection &intersection, CellData &cellData)
	Calculates the velocity at a boundary. More...

void	updateVelocity ()
	Function for updating the velocity field if iterations are necessary in the transport solution. More...

void	initialize (bool solveTwice=true)
	Initializes pressure and velocity. More...

void	update ()
	Pressure and velocity update. More...

bool	calculateVelocityInTransport ()
	Indicates if velocity is reconstructed in the pressure step or in the transport step. More...

template<class MultiWriter >
void	addOutputVtkFields (MultiWriter &writer)
	Adds velocity output to the output file. More...

void	initialize ()
	Initialize pressure model. More...

void	updateMaterialLaws ()
	constitutive functions are initialized and stored in the variables object More...

void	storePressureSolution ()
	Globally stores the pressure solution. More...

void	storePressureSolution (const Element &element)
	Stores the pressure solution of a cell. More...

Scalar	evaluateErrorTerm (CellData &cellData)
	Volume correction term to correct for unphysical saturation overshoots/undershoots. More...

InteractionVolumeContainer &	interactionVolumes ()
	Returns the global container of the stored interaction volumes. More...

TransmissibilityCalculator &	transmissibilityCalculator ()
	Returns the transmissibility calculator. More...

const Scalar	pressure (const int eIdxGlobal) const
	Public access function for the primary pressure variable. More...

void	getSource (EntryType &entry, const Element &element, const CellData &cellData, const bool first)
	Function which calculates the source entry. More...

void	getStorage (EntryType &entry, const Element &element, const CellData &cellData, const bool first)
	Function which calculates the storage entry. More...

void	getFlux (EntryType &entry, const Intersection &intersection, const CellData &cellData, const bool first)
	Function which calculates the flux entry. More...

void	getFluxOnBoundary (EntryType &entry, const Intersection &intersection, const CellData &cellData, const bool first)
	Function which calculates the boundary flux entry. More...

const Matrix &	globalMatrix ()
	Returns the global matrix of the last pressure solution step. More...

const RHSVector &	rightHandSide ()
	Returns the right hand side vector of the last pressure solution step. More...

void	serializeEntity (std::ostream &outstream, const Element &element)
	Function for serialization of the pressure field. More...

void	deserializeEntity (std::istream &instream, const Element &element)
	Function for deserialization of the pressure field. More...

void	setFixPressureAtIndex (Scalar pressure, int eIdxGlobal)
	Set a pressure to be fixed at a certain cell. More...

void	unsetFixPressureAtIndex (int eIdxGlobal)
	Reset the fixed pressure state. More...

void	resetFixPressureAtIndex ()

Protected Types
enum	{ rhs = 1 , matrix = 0 }
	Indices of matrix and rhs entries. More...

enum	{ pressEqIdx = Indices::pressureEqIdx }

using	EntryType = Dune::FieldVector< Scalar, 2 >

Protected Member Functions
void	initializeMatrix ()
	Initializes the sparse matrix for the pressure solution. More...

void	initializeMatrixRowSize ()
	Initializes the row size of the sparse matrix for the pressure solution. More...

void	initializeMatrixIndices ()
	Initializes the indices of the sparse matrix for the pressure solution. More...

void	assemble ()
	assembles the global matrix and rhs vector for the pressure solution More...

void	assemble (bool first)
	Function which assembles the system of equations to be solved. More...

void	assembleHangingNodeInteractionVolume (InteractionVolume &interactionVolume)
	assembles the matrix entries of one hanging node interaction volume into the global matrix More...

void	assembleInnerInteractionVolume (InteractionVolume &interactionVolume)
	assembles the matrix entries of one interaction volume into the global matrix More...

void	assembleBoundaryInteractionVolume (InteractionVolume &interactionVolume)

void	solve ()
	Solves the global system of equations to get the spatial distribution of the pressure. More...

PressureSolution &	pressure ()
	Returns the vector containing the pressure solution. More...

const PressureSolution &	pressure () const
	Returns the vector containing the pressure solution. More...

void	initializePressure ()
	Initialization of the pressure solution vector: Initialization with meaningful values may. More...

Protected Attributes
InteractionVolumeContainer	interactionVolumes_

TransmissibilityCalculator	transmissibilityCalculator_
	The transmissibility calculator including methods for the MPFA transmissibility calculation. More...

Matrix	A_
	Global stiffnes matrix (sparse matrix which is build by the `initializeMatrix()` function) More...

RHSVector	f_
	Right hand side vector. More...

Member Typedef Documentation

◆ EntryType

template<class TypeTag >

using Dumux::FVPressure< TypeTag >::EntryType = Dune::FieldVector<Scalar, 2>

protectedinherited

Type of the vector of entries

Contains the return values of the get*()-functions (matrix or right-hand side entry).

◆ TransmissibilityType

template<class TypeTag >

using Dumux::FvMpfaL3dPressure2pAdaptive< TypeTag >::TransmissibilityType = typename TransmissibilityCalculator::TransmissibilityType

inherited

Type including methods for calculation of MPFA transmissibilities.

Member Enumeration Documentation

◆ anonymous enum

template<class TypeTag >

anonymous enum

protectedinherited

Indices of matrix and rhs entries.

During the assembling of the global system of equations get-functions are called (getSource(), getFlux(), etc.), which return global matrix or right hand side entries in a vector. These can be accessed using following indices:

Enumerator
rhs	index for the right hand side entry
matrix	index for the global matrix entry

◆ anonymous enum

template<class TypeTag >

anonymous enum

protectedinherited

Enumerator
pressEqIdx

Constructor & Destructor Documentation

◆ FvMpfaL3dPressureVelocity2pAdaptive()

template<class TypeTag >

Dumux::FvMpfaL3dPressureVelocity2pAdaptive< TypeTag >::FvMpfaL3dPressureVelocity2pAdaptive ( Problem & problem )

inline

Constructs a FvMpfaL3dPressureVelocity2pAdaptive object.

Parameters

problem A problem class object

Member Function Documentation

◆ addOutputVtkFields()

template<class TypeTag >

template<class MultiWriter >

void Dumux::FvMpfaL3dPressureVelocity2pAdaptive< TypeTag >::addOutputVtkFields ( MultiWriter & writer )

inline

Adds velocity output to the output file.

Adds the phase velocities or a total velocity (depending on the formulation) to the output. If the VtkOutputLevel is equal to zero (default) only primary variables are written, if it is larger than zero also secondary variables are written.

Template Parameters

MultiWriter Class defining the output writer

Parameters

writer The output writer (usually a VTKMultiWriter object)

◆ assemble() [1/2]

template<class TypeTag >

void Dumux::FvMpfaL3dPressure2pAdaptive< TypeTag >::assemble

protectedinherited

assembles the global matrix and rhs vector for the pressure solution

◆ assemble() [2/2]

template<class TypeTag >

void Dumux::FVPressure< TypeTag >::assemble ( bool first )

protectedinherited

Function which assembles the system of equations to be solved.

This function assembles the Matrix and the right hand side (RHS) vector to solve for a pressure field with a Finite-Volume (FV) discretization. Implementations of this base class have to provide the methods getSource(), getStorage(), getFlux() and getFluxOnBoundary() if the assemble() method is called!

Parameters

first Indicates if function is called at the initialization step or during the simulation (If first is true, no pressure field of previous iterations is required)

◆ assembleBoundaryInteractionVolume()

template<class TypeTag >

void Dumux::FvMpfaL3dPressure2p< TypeTag >::assembleBoundaryInteractionVolume ( InteractionVolume & interactionVolume )

protectedinherited

◆ assembleHangingNodeInteractionVolume()

template<class TypeTag >

void Dumux::FvMpfaL3dPressure2pAdaptive< TypeTag >::assembleHangingNodeInteractionVolume ( InteractionVolume & interactionVolume )

protectedinherited

assembles the matrix entries of one hanging node interaction volume into the global matrix

◆ assembleInnerInteractionVolume()

template<class TypeTag >

void Dumux::FvMpfaL3dPressure2p< TypeTag >::assembleInnerInteractionVolume ( InteractionVolume & interactionVolume )

protectedinherited

assembles the matrix entries of one interaction volume into the global matrix

◆ calculateVelocity() [1/2]

template<class TypeTag >

void Dumux::FvMpfaL3dPressureVelocity2pAdaptive< TypeTag >::calculateVelocity

Calculates the velocities at a cell-cell interfaces for the entire simulation grid.

Calculates the velocities at a cell-cell interfaces from a given pressure field for the entire simulation grid.

◆ calculateVelocity() [2/2]

template<class TypeTag >

void Dumux::FvMpfaL3dPressureVelocity2pAdaptive< TypeTag >::calculateVelocity	(	const Intersection &	intersection,
		CellData &	cellData
	)

Calculates the velocity at a cell-cell interface.

Calculates the velocity at a cell-cell interface from a given pressure field.

Parameters

intersection	Intersection of two grid cells
cellData	Object containing all model relevant cell data

◆ calculateVelocityInTransport()

template<class TypeTag >

bool Dumux::FvMpfaL3dPressureVelocity2pAdaptive< TypeTag >::calculateVelocityInTransport ( )

inline

Indicates if velocity is reconstructed in the pressure step or in the transport step.

Returns true (In the standard finite volume discretization the velocity is calculated during the saturation transport.)

◆ calculateVelocityOnBoundary()

template<class TypeTag >

void Dumux::FvMpfaL3dPressureVelocity2pAdaptive< TypeTag >::calculateVelocityOnBoundary	(	const Intersection &	intersection,
		CellData &	cellData
	)

Calculates the velocity at a boundary.

Calculates the velocity at a boundary from a given pressure field.

Parameters

intersection	Boundary intersection
cellData	Object containing all model relevant cell data

◆ deserializeEntity()

template<class TypeTag >

void Dumux::FVPressure< TypeTag >::deserializeEntity	(	std::istream &	instream,
		const Element &	element
	)

inlineinherited

Function for deserialization of the pressure field.

Function needed for restart option. Reads the pressure of a grid element from a restart file.

Parameters

instream	Stream from the restart file.
element	Grid element

◆ evaluateErrorTerm()

template<class TypeTag >

Scalar Dumux::FvMpfaL3dPressure2p< TypeTag >::evaluateErrorTerm ( CellData & cellData )

inlineinherited

Volume correction term to correct for unphysical saturation overshoots/undershoots.

These can occur if the estimated time step for the explicit transport was too large. Correction by an artificial source term allows to correct this errors due to wrong time-stepping without losing mass conservation. The error term looks as follows:

\[ q_{error} = \begin{cases} S < 0 & \frac{S}{\Delta t} V \\ S > 1 & \frac{(S - 1)}{\Delta t} V \\ 0 \le S \le 1 & 0 \end{cases} \]

Parameters

cellData The IMPES CellData object of the current cell.

Returns: The scalar value of the error term.

◆ getFlux()

template<class TypeTag >

void Dumux::FVPressure< TypeTag >::getFlux	(	EntryType &	entry,
		const Intersection &	intersection,
		const CellData &	cellData,
		const bool	first
	)

inherited

Function which calculates the flux entry.

Function computes the inter-cell flux term and writes it to the corresponding entry of the entry vector

Parameters

entry	Vector containing return values of the function
intersection	Intersection of two grid elements
cellData	Object containing all model relevant cell data
first	Indicates if function is called in the initialization step or during the simulation

◆ getFluxOnBoundary()

template<class TypeTag >

void Dumux::FVPressure< TypeTag >::getFluxOnBoundary	(	EntryType &	entry,
		const Intersection &	intersection,
		const CellData &	cellData,
		const bool	first
	)

inherited

Function which calculates the boundary flux entry.

Function computes the boundary-flux term and writes it to the corresponding entry of the entry vector

Parameters

entry	Vector containing return values of the function
intersection	Intersection of two grid elements
cellData	Object containing all model relevant cell data
first	Indicates if function is called in the initialization step or during the simulation

◆ getSource()

template<class TypeTag >

void Dumux::FVPressure< TypeTag >::getSource	(	EntryType &	entry,
		const Element &	element,
		const CellData &	cellData,
		const bool	first
	)

inherited

Function which calculates the source entry.

Function computes the source term and writes it to the corresponding entry of the entry vector

Parameters

entry	Vector containing return values of the function
element	Grid element
cellData	Object containing all model relevant cell data
first	Indicates if function is called in the initialization step or during the simulation

◆ getStorage()

template<class TypeTag >

void Dumux::FVPressure< TypeTag >::getStorage	(	EntryType &	entry,
		const Element &	element,
		const CellData &	cellData,
		const bool	first
	)

inherited

Function which calculates the storage entry.

Function computes the storage term and writes it to the corresponding entry of the entry vector

Parameters

entry	Vector containing return values of the function
element	Grid element
cellData	Object containing all model relevant cell data
first	Indicates if function is called in the initialization step or during the simulation

◆ globalMatrix()

template<class TypeTag >

const Matrix & Dumux::FVPressure< TypeTag >::globalMatrix ( )

inlineinherited

Returns the global matrix of the last pressure solution step.

◆ initialize() [1/2]

template<class TypeTag >

void Dumux::FVPressure< TypeTag >::initialize ( )

inlineinherited

Initialize pressure model.

Function initializes the sparse matrix to solve the global system of equations and sets/calculates the initial pressure

◆ initialize() [2/2]

template<class TypeTag >

void Dumux::FvMpfaL3dPressureVelocity2pAdaptive< TypeTag >::initialize ( bool solveTwice = true )

inline

Initializes pressure and velocity.

Function initializes the sparse matrix to solve the global system of equations and sets/calculates the initial pressure

◆ initializeMatrix()

template<class TypeTag >

void Dumux::FvMpfaL3dPressure2pAdaptive< TypeTag >::initializeMatrix

protectedinherited

Initializes the sparse matrix for the pressure solution.

◆ initializeMatrixIndices()

template<class TypeTag >

void Dumux::FvMpfaL3dPressure2pAdaptive< TypeTag >::initializeMatrixIndices

protectedinherited

Initializes the indices of the sparse matrix for the pressure solution.

◆ initializeMatrixRowSize()

template<class TypeTag >

void Dumux::FvMpfaL3dPressure2pAdaptive< TypeTag >::initializeMatrixRowSize

protectedinherited

Initializes the row size of the sparse matrix for the pressure solution.

◆ initializePressure()

template<class TypeTag >

void Dumux::FVPressure< TypeTag >::initializePressure ( )

inlineprotectedinherited

Initialization of the pressure solution vector: Initialization with meaningful values may.

◆ interactionVolumes()

template<class TypeTag >

InteractionVolumeContainer & Dumux::FvMpfaL3dPressure2p< TypeTag >::interactionVolumes ( )

inlineinherited

Returns the global container of the stored interaction volumes.

◆ pressure() [1/3]

template<class TypeTag >

PressureSolution & Dumux::FVPressure< TypeTag >::pressure ( )

inlineprotectedinherited

Returns the vector containing the pressure solution.

◆ pressure() [2/3]

template<class TypeTag >

const PressureSolution & Dumux::FVPressure< TypeTag >::pressure ( ) const

inlineprotectedinherited

Returns the vector containing the pressure solution.

◆ pressure() [3/3]

template<class TypeTag >

const Scalar Dumux::FVPressure< TypeTag >::pressure ( const int eIdxGlobal ) const

inlineinherited

Public access function for the primary pressure variable.

Function returns the cell pressure value at index eIdxGlobal

Parameters

eIdxGlobal Global index of a grid cell

◆ resetFixPressureAtIndex()

template<class TypeTag >

void Dumux::FVPressure< TypeTag >::resetFixPressureAtIndex ( )

inlineinherited

◆ rightHandSide()

template<class TypeTag >

const RHSVector & Dumux::FVPressure< TypeTag >::rightHandSide ( )

inlineinherited

Returns the right hand side vector of the last pressure solution step.

◆ serializeEntity()

template<class TypeTag >

void Dumux::FVPressure< TypeTag >::serializeEntity	(	std::ostream &	outstream,
		const Element &	element
	)

inlineinherited

Function for serialization of the pressure field.

Function needed for restart option. Writes the pressure of a grid element to a restart file.

Parameters

outstream	Stream into the restart file.
element	Grid element

◆ setFixPressureAtIndex()

template<class TypeTag >

void Dumux::FVPressure< TypeTag >::setFixPressureAtIndex	(	Scalar	pressure,
		int	eIdxGlobal
	)

inlineinherited

Set a pressure to be fixed at a certain cell.

Allows to fix a pressure somewhere (at one certain cell) in the domain. This can be necessary e.g. if only Neumann boundary conditions are defined. The pressure is fixed until the unsetFixPressureAtIndex() function is called

Parameters

pressure	Pressure value at eIdxGlobal
eIdxGlobal	Global index of a grid cell

◆ solve()

template<class TypeTag >

void Dumux::FVPressure< TypeTag >::solve

protectedinherited

Solves the global system of equations to get the spatial distribution of the pressure.

◆ storePressureSolution() [1/2]

template<class TypeTag >

void Dumux::FvMpfaL3dPressure2p< TypeTag >::storePressureSolution ( )

inlineinherited

Globally stores the pressure solution.

◆ storePressureSolution() [2/2]

template<class TypeTag >

void Dumux::FvMpfaL3dPressure2p< TypeTag >::storePressureSolution ( const Element & element )

inlineinherited

Stores the pressure solution of a cell.

Parameters

element Dune grid element

◆ transmissibilityCalculator()

template<class TypeTag >

TransmissibilityCalculator & Dumux::FvMpfaL3dPressure2p< TypeTag >::transmissibilityCalculator ( )

inlineinherited

Returns the transmissibility calculator.

Object including methods for the MPFA transmissibility calculation

◆ unsetFixPressureAtIndex()

template<class TypeTag >

void Dumux::FVPressure< TypeTag >::unsetFixPressureAtIndex ( int eIdxGlobal )

inlineinherited

Reset the fixed pressure state.

No pressure is fixed inside the domain until setFixPressureAtIndex() function is called again.

Parameters

eIdxGlobal Global index of a grid cell

◆ update()

template<class TypeTag >

void Dumux::FvMpfaL3dPressureVelocity2pAdaptive< TypeTag >::update ( )

inline

Pressure and velocity update.

◆ updateMaterialLaws()

template<class TypeTag >

void Dumux::FvMpfaL3dPressure2p< TypeTag >::updateMaterialLaws

inherited

constitutive functions are initialized and stored in the variables object

constitutive functions are updated once if new saturations are calculated and stored in the variables object

◆ updateVelocity()

template<class TypeTag >

void Dumux::FvMpfaL3dPressureVelocity2pAdaptive< TypeTag >::updateVelocity ( )

inline

Function for updating the velocity field if iterations are necessary in the transport solution.

Member Data Documentation

◆ A_

template<class TypeTag >

Matrix Dumux::FVPressure< TypeTag >::A_

protectedinherited

Global stiffnes matrix (sparse matrix which is build by the initializeMatrix() function)

◆ f_

template<class TypeTag >

RHSVector Dumux::FVPressure< TypeTag >::f_

protectedinherited

Right hand side vector.

◆ interactionVolumes_

template<class TypeTag >

InteractionVolumeContainer Dumux::FvMpfaL3dPressure2p< TypeTag >::interactionVolumes_

protectedinherited

Global container of the stored interaction volumes

◆ transmissibilityCalculator_

template<class TypeTag >

TransmissibilityCalculator Dumux::FvMpfaL3dPressure2p< TypeTag >::transmissibilityCalculator_

protectedinherited

The transmissibility calculator including methods for the MPFA transmissibility calculation.

The documentation for this class was generated from the following file:

3dpressurevelocityadaptive.hh

Description

Public Types

Public Member Functions

Protected Types

Protected Member Functions

Protected Attributes

Member Typedef Documentation

◆ EntryType

◆ TransmissibilityType

Member Enumeration Documentation

◆ anonymous enum

◆ anonymous enum

Constructor & Destructor Documentation

◆ FvMpfaL3dPressureVelocity2pAdaptive()

Member Function Documentation

◆ addOutputVtkFields()

◆ assemble() [1/2]

◆ assemble() [2/2]

◆ assembleBoundaryInteractionVolume()

◆ assembleHangingNodeInteractionVolume()

◆ assembleInnerInteractionVolume()

◆ calculateVelocity() [1/2]

◆ calculateVelocity() [2/2]

◆ calculateVelocityInTransport()

◆ calculateVelocityOnBoundary()

◆ deserializeEntity()

◆ evaluateErrorTerm()

◆ getFlux()

◆ getFluxOnBoundary()

◆ getSource()

◆ getStorage()

◆ globalMatrix()

◆ initialize() [1/2]

◆ initialize() [2/2]

◆ initializeMatrix()

◆ initializeMatrixIndices()

◆ initializeMatrixRowSize()

◆ initializePressure()

◆ interactionVolumes()

◆ pressure() [1/3]

◆ pressure() [2/3]

◆ pressure() [3/3]

◆ resetFixPressureAtIndex()

◆ rightHandSide()

◆ serializeEntity()

◆ setFixPressureAtIndex()

◆ solve()

◆ storePressureSolution() [1/2]

◆ storePressureSolution() [2/2]

◆ transmissibilityCalculator()

◆ unsetFixPressureAtIndex()

◆ update()

◆ updateMaterialLaws()

◆ updateVelocity()

Member Data Documentation

◆ A_

◆ f_

◆ interactionVolumes_

◆ transmissibilityCalculator_