porousmediumflow/2p2c/volumevariables.hh

Go to the documentation of this file.

// -*- mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*-
// vi: set et ts=4 sw=4 sts=4:
/*****************************************************************************
 *   See the file COPYING for full copying permissions.                      *
 *                                                                           *
 *   This program is free software: you can redistribute it and/or modify    *
 *   it under the terms of the GNU General Public License as published by    *
 *   the Free Software Foundation, either version 3 of the License, or       *
 *   (at your option) any later version.                                     *
 *                                                                           *
 *   This program is distributed in the hope that it will be useful,         *
 *   but WITHOUT ANY WARRANTY; without even the implied warranty of          *
 *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the            *
 *   GNU General Public License for more details.                            *
 *                                                                           *
 *   You should have received a copy of the GNU General Public License       *
 *   along with this program.  If not, see <http://www.gnu.org/licenses/>.   *
 *****************************************************************************/
 
#ifndef DUMUX_2P2C_VOLUME_VARIABLES_HH
#define DUMUX_2P2C_VOLUME_VARIABLES_HH
 
#include <dumux/material/fluidstates/compositional.hh>
#include <dumux/material/constraintsolvers/computefromreferencephase.hh>
#include <dumux/material/constraintsolvers/misciblemultiphasecomposition.hh>
 
#include <dumux/discretization/method.hh>
#include <dumux/porousmediumflow/volumevariables.hh>
#include <dumux/porousmediumflow/nonisothermal/volumevariables.hh>
#include <dumux/porousmediumflow/2p/formulation.hh>
#include <dumux/material/solidstates/updatesolidvolumefractions.hh>
#include <dumux/porousmediumflow/2pnc/primaryvariableswitch.hh>
 
namespace Dumux {
 
// forward declaration
template <class Traits,  bool enableChemicalNonEquilibrium, bool useConstraintSolver>
class TwoPTwoCVolumeVariablesImplementation;
 

template <class Traits, bool useConstraintSolver = true>
using TwoPTwoCVolumeVariables =  TwoPTwoCVolumeVariablesImplementation<Traits,  Traits::ModelTraits::enableChemicalNonEquilibrium(), useConstraintSolver>;

template <class Traits, class Impl>
class TwoPTwoCVolumeVariablesBase
: public PorousMediumFlowVolumeVariables<Traits>
, public EnergyVolumeVariables<Traits, TwoPTwoCVolumeVariables<Traits> >
{
    using ParentType = PorousMediumFlowVolumeVariables< Traits>;
    using EnergyVolVars = EnergyVolumeVariables<Traits, TwoPTwoCVolumeVariables<Traits> >;
 
    using Scalar = typename Traits::PrimaryVariables::value_type;
    using ModelTraits = typename Traits::ModelTraits;
 
    static constexpr int numFluidComps = ParentType::numFluidComponents();
    // component indices
    enum
    {
        comp0Idx = Traits::FluidSystem::comp0Idx,
        comp1Idx = Traits::FluidSystem::comp1Idx,
        phase0Idx = Traits::FluidSystem::phase0Idx,
        phase1Idx = Traits::FluidSystem::phase1Idx
    };
 
    // phase presence indices
    enum
    {
        firstPhaseOnly = ModelTraits::Indices::firstPhaseOnly,
        secondPhaseOnly = ModelTraits::Indices::secondPhaseOnly,
        bothPhases = ModelTraits::Indices::bothPhases
    };
 
    // primary variable indices
    enum
    {
        switchIdx = ModelTraits::Indices::switchIdx,
        pressureIdx = ModelTraits::Indices::pressureIdx
    };
 
    // formulations
    static constexpr auto formulation = ModelTraits::priVarFormulation();
 
    using PermeabilityType = typename Traits::PermeabilityType;
    using ComputeFromReferencePhase = Dumux::ComputeFromReferencePhase<Scalar, typename Traits::FluidSystem>;
    using MiscibleMultiPhaseComposition = Dumux::MiscibleMultiPhaseComposition< Scalar, typename Traits::FluidSystem >;
public:
    using FluidState = typename Traits::FluidState;
    using FluidSystem = typename Traits::FluidSystem;
    using SolidState = typename Traits::SolidState;
    using SolidSystem = typename Traits::SolidSystem;
    using PrimaryVariableSwitch = TwoPNCPrimaryVariableSwitch;

    static constexpr bool useMoles() { return ModelTraits::useMoles(); }
    static constexpr TwoPFormulation priVarFormulation() { return formulation; }
 
    // check for permissive combinations
    static_assert(ModelTraits::numFluidPhases() == 2, "NumPhases set in the model is not two!");
    static_assert(ModelTraits::numFluidComponents() == 2, "NumComponents set in the model is not two!");
    static_assert((formulation == TwoPFormulation::p0s1 || formulation == TwoPFormulation::p1s0), "Chosen TwoPFormulation not supported!");

    template<class ElemSol, class Problem, class Element, class Scv>
    void update(const ElemSol& elemSol, const Problem& problem, const Element& element, const Scv& scv)
    {
        ParentType::update(elemSol, problem, element, scv);
        asImp_().completeFluidState(elemSol, problem, element, scv, fluidState_, solidState_);
 
        // Second instance of a parameter cache. Could be avoided if
        // diffusion coefficients also became part of the fluid state.
        typename FluidSystem::ParameterCache paramCache;
        paramCache.updateAll(fluidState_);
 
        using MaterialLaw = typename Problem::SpatialParams::MaterialLaw;
        const auto& matParams = problem.spatialParams().materialLawParams(element, scv, elemSol);
 
        const int wPhaseIdx = problem.spatialParams().template wettingPhase<FluidSystem>(element, scv, elemSol);
        const int nPhaseIdx = 1 - wPhaseIdx;
 
        // relative permeabilities -> require wetting phase saturation as parameter!
        relativePermeability_[wPhaseIdx] = MaterialLaw::krw(matParams, saturation(wPhaseIdx));
        relativePermeability_[nPhaseIdx] = MaterialLaw::krn(matParams, saturation(wPhaseIdx));
 
        // binary diffusion coefficients
        diffCoeff_[phase0Idx] = FluidSystem::binaryDiffusionCoefficient(fluidState_, paramCache, phase0Idx, comp0Idx, comp1Idx);
        diffCoeff_[phase1Idx] = FluidSystem::binaryDiffusionCoefficient(fluidState_, paramCache, phase1Idx, comp0Idx, comp1Idx);
 
        // porosity & permeabilty
        updateSolidVolumeFractions(elemSol, problem, element, scv, solidState_, numFluidComps);
        EnergyVolVars::updateSolidEnergyParams(elemSol, problem, element, scv, solidState_);
        permeability_ = problem.spatialParams().permeability(element, scv, elemSol);
    }

    template<class ElemSol, class Problem, class Element, class Scv>
    void completeFluidState(const ElemSol& elemSol,
                            const Problem& problem,
                            const Element& element,
                            const Scv& scv,
                            FluidState& fluidState,
                            SolidState& solidState)
    {
        EnergyVolVars::updateTemperature(elemSol, problem, element, scv, fluidState, solidState);
 
        const auto& priVars = elemSol[scv.localDofIndex()];
        const auto phasePresence = priVars.state();
 
        using MaterialLaw = typename Problem::SpatialParams::MaterialLaw;
        const auto& materialParams = problem.spatialParams().materialLawParams(element, scv, elemSol);
        const int wPhaseIdx = problem.spatialParams().template wettingPhase<FluidSystem>(element, scv, elemSol);
        fluidState.setWettingPhase(wPhaseIdx);
 
        // set the saturations
        if (phasePresence == firstPhaseOnly)
        {
            fluidState.setSaturation(phase0Idx, 1.0);
            fluidState.setSaturation(phase1Idx, 0.0);
        }
        else if (phasePresence == secondPhaseOnly)
        {
            fluidState.setSaturation(phase0Idx, 0.0);
            fluidState.setSaturation(phase1Idx, 1.0);
        }
        else if (phasePresence == bothPhases)
        {
            if (formulation == TwoPFormulation::p0s1)
            {
                fluidState.setSaturation(phase1Idx, priVars[switchIdx]);
                fluidState.setSaturation(phase0Idx, 1 - priVars[switchIdx]);
            }
            else
            {
                fluidState.setSaturation(phase0Idx, priVars[switchIdx]);
                fluidState.setSaturation(phase1Idx, 1 - priVars[switchIdx]);
            }
        }
        else
            DUNE_THROW(Dune::InvalidStateException, "Invalid phase presence.");
 
        // set pressures of the fluid phases
        pc_ = MaterialLaw::pc(materialParams, fluidState.saturation(wPhaseIdx));
        if (formulation == TwoPFormulation::p0s1)
        {
            fluidState.setPressure(phase0Idx, priVars[pressureIdx]);
            fluidState.setPressure(phase1Idx, (wPhaseIdx == phase0Idx) ? priVars[pressureIdx] + pc_
                                                                       : priVars[pressureIdx] - pc_);
        }
        else
        {
            fluidState.setPressure(phase1Idx, priVars[pressureIdx]);
            fluidState.setPressure(phase0Idx, (wPhaseIdx == phase0Idx) ? priVars[pressureIdx] - pc_
                                                                       : priVars[pressureIdx] + pc_);
        }
   }

    const FluidState &fluidState() const
    { return fluidState_; }

    const SolidState &solidState() const
    { return solidState_; }

    Scalar averageMolarMass(int phaseIdx) const
    { return fluidState_.averageMolarMass(phaseIdx); }

    Scalar saturation(const int phaseIdx) const
    { return fluidState_.saturation(phaseIdx); }

    Scalar massFraction(const int phaseIdx, const int compIdx) const
    { return fluidState_.massFraction(phaseIdx, compIdx); }

    Scalar moleFraction(const int phaseIdx, const int compIdx) const
    { return fluidState_.moleFraction(phaseIdx, compIdx); }

    Scalar density(const int phaseIdx) const
    { return fluidState_.density(phaseIdx); }

    Scalar viscosity(const int phaseIdx) const
    { return fluidState_.viscosity(phaseIdx); }

    Scalar molarDensity(const int phaseIdx) const
    { return fluidState_.molarDensity(phaseIdx); }

    Scalar pressure(const int phaseIdx) const
    { return fluidState_.pressure(phaseIdx); }

    Scalar temperature() const
    { return fluidState_.temperature(/*phaseIdx=*/0); }

    Scalar relativePermeability(const int phaseIdx) const
    { return relativePermeability_[phaseIdx]; }

    Scalar mobility(const int phaseIdx) const
    { return relativePermeability_[phaseIdx]/fluidState_.viscosity(phaseIdx); }

    Scalar capillaryPressure() const
    { return pc_; }

    Scalar porosity() const
    { return solidState_.porosity(); }

    const PermeabilityType& permeability() const
    { return permeability_; }

    Scalar diffusionCoefficient(int phaseIdx, int compIdx) const
    {
        if(phaseIdx == compIdx)
            DUNE_THROW(Dune::InvalidStateException, "Diffusion coefficient called for phaseIdx = compIdx");
        else
            return diffCoeff_[phaseIdx];
    }
 
private:
    FluidState fluidState_;
    SolidState solidState_;
 
    Scalar pc_;                     // The capillary pressure
    PermeabilityType permeability_; // Effective permeability within the control volume
 
    // Relative permeability within the control volume
    std::array<Scalar, ModelTraits::numFluidPhases()> relativePermeability_;
 
    // Binary diffusion coefficients for the phases
    std::array<Scalar, ModelTraits::numFluidPhases()> diffCoeff_;
 
protected:
    const Impl &asImp_() const { return *static_cast<const Impl*>(this); }
    Impl &asImp_() { return *static_cast<Impl*>(this); }
};

template <class Traits, bool useConstraintSolver>
class TwoPTwoCVolumeVariablesImplementation<Traits, false, useConstraintSolver>
: public TwoPTwoCVolumeVariablesBase<Traits, TwoPTwoCVolumeVariablesImplementation<Traits, false, useConstraintSolver>>
{
    using ParentType = TwoPTwoCVolumeVariablesBase< Traits, TwoPTwoCVolumeVariablesImplementation<Traits, false, useConstraintSolver>>;
    using EnergyVolVars = EnergyVolumeVariables<Traits, TwoPTwoCVolumeVariables<Traits> >;
 
    using Scalar = typename Traits::PrimaryVariables::value_type;
    using ModelTraits = typename Traits::ModelTraits;
 
    static constexpr int numFluidComps = ParentType::numFluidComponents();
    // component indices
    enum
    {
        comp0Idx = Traits::FluidSystem::comp0Idx,
        comp1Idx = Traits::FluidSystem::comp1Idx,
        phase0Idx = Traits::FluidSystem::phase0Idx,
        phase1Idx = Traits::FluidSystem::phase1Idx
    };
 
    // phase presence indices
    enum
    {
        firstPhaseOnly = ModelTraits::Indices::firstPhaseOnly,
        secondPhaseOnly = ModelTraits::Indices::secondPhaseOnly,
        bothPhases = ModelTraits::Indices::bothPhases
    };
 
    // primary variable indices
    enum
    {
        switchIdx = ModelTraits::Indices::switchIdx,
        pressureIdx = ModelTraits::Indices::pressureIdx
    };
 
    // formulations
    static constexpr auto formulation = ModelTraits::priVarFormulation();
 
    using ComputeFromReferencePhase = Dumux::ComputeFromReferencePhase<Scalar, typename Traits::FluidSystem>;
    using MiscibleMultiPhaseComposition = Dumux::MiscibleMultiPhaseComposition< Scalar, typename Traits::FluidSystem >;
public:
    using FluidState = typename Traits::FluidState;
    using FluidSystem = typename Traits::FluidSystem;
    using SolidState = typename Traits::SolidState;
    using SolidSystem = typename Traits::SolidSystem;
    using PrimaryVariableSwitch = TwoPNCPrimaryVariableSwitch;

    static constexpr bool useMoles() { return ModelTraits::useMoles(); }
    static constexpr TwoPFormulation priVarFormulation() { return formulation; }
 
    // check for permissive combinations
    static_assert(useMoles() || (!useMoles() && useConstraintSolver), "if !UseMoles, UseConstraintSolver has to be set to true");
 
    // The computations in the explicit composition update most probably assume a liquid-gas interface with
    // liquid as first phase. TODO: is this really needed? The constraint solver does the job anyway, doesn't it?
    static_assert(useConstraintSolver || (!FluidSystem::isGas(phase0Idx) && FluidSystem::isGas(phase1Idx)),
                   "Explicit composition calculation has to be re-checked for NON-liquid-gas equilibria");

    template<class ElemSol, class Problem, class Element, class Scv>
    void completeFluidState(const ElemSol& elemSol,
                            const Problem& problem,
                            const Element& element,
                            const Scv& scv,
                            FluidState& fluidState,
                            SolidState& solidState)
    {
        ParentType::completeFluidState(elemSol, problem, element, scv, fluidState, solidState);
 
        const auto& priVars = elemSol[scv.localDofIndex()];
        const auto phasePresence = priVars.state();
 
        // calculate the phase compositions
        typename FluidSystem::ParameterCache paramCache;
 
        // If constraint solver is not used, get the phase pressures and set the fugacity coefficients here
        if(!useConstraintSolver)
        {
            for (int phaseIdx = 0; phaseIdx < ModelTraits::numFluidPhases(); ++ phaseIdx)
            {
                assert(FluidSystem::isIdealMixture(phaseIdx));
                for (int compIdx = 0; compIdx < ModelTraits::numFluidComponents(); ++ compIdx) {
                    Scalar phi = FluidSystem::fugacityCoefficient(fluidState, paramCache, phaseIdx, compIdx);
                    fluidState.setFugacityCoefficient(phaseIdx, compIdx, phi);
                }
            }
        }
 
        // now comes the tricky part: calculate phase compositions
        const Scalar p0 = fluidState.pressure(phase0Idx);
        const Scalar p1 = fluidState.pressure(phase1Idx);
        if (phasePresence == bothPhases)
        {
            // both phases are present, phase compositions are a result
            // of the equilibrium between the phases. This is the job
            // of the "MiscibleMultiPhaseComposition" constraint solver
            if(useConstraintSolver)
                MiscibleMultiPhaseComposition::solve(fluidState,
                                                     paramCache);
            // ... or calculated explicitly this way ...
            else
            {
                // get the partial pressure of the main component of the first phase within the
                // second phase == vapor pressure due to equilibrium. Note that in this case the
                // fugacityCoefficient * p is the vapor pressure (see implementation in respective fluidsystem)
                const Scalar partPressLiquid = FluidSystem::fugacityCoefficient(fluidState, phase0Idx, comp0Idx)*p0;
 
                // get the partial pressure of the main component of the gas phase
                const Scalar partPressGas = p1 - partPressLiquid;
 
                // calculate the mole fractions of the components within the nonwetting phase
                const Scalar xnn = partPressGas / p1;
                const Scalar xnw = partPressLiquid / p1;
 
                // calculate the mole fractions of the components within the wetting phase
                // note that in this case the fugacityCoefficient * p is the Henry Coefficient
                // (see implementation in respective fluidsystem)
                const Scalar xwn = partPressGas / (FluidSystem::fugacityCoefficient(fluidState, phase0Idx, comp1Idx)*p0);
                const Scalar xww = 1.0 - xwn;
 
                // set all mole fractions
                fluidState.setMoleFraction(phase0Idx, comp0Idx, xww);
                fluidState.setMoleFraction(phase0Idx, comp1Idx, xwn);
                fluidState.setMoleFraction(phase1Idx, comp0Idx, xnw);
                fluidState.setMoleFraction(phase1Idx, comp1Idx, xnn);
            }
        }
        else if (phasePresence == secondPhaseOnly)
        {
            // only the second phase is present, composition is stored explicitly.
            if( useMoles() )
            {
                fluidState.setMoleFraction(phase1Idx, comp1Idx, 1 - priVars[switchIdx]);
                fluidState.setMoleFraction(phase1Idx, comp0Idx, priVars[switchIdx]);
            }
            // setMassFraction() has only to be called 1-numComponents times
            else
                fluidState.setMassFraction(phase1Idx, comp0Idx, priVars[switchIdx]);
 
            // calculate the composition of the remaining phases (as
            // well as the densities of all phases). This is the job
            // of the "ComputeFromReferencePhase" constraint solver
            if (useConstraintSolver)
                ComputeFromReferencePhase::solve(fluidState,
                                                 paramCache,
                                                 phase1Idx);
            // ... or calculated explicitly this way ...
            else
            {
                // note that the water phase is actually not existing!
                // thus, this is used as phase switch criterion
                const Scalar xnw = priVars[switchIdx];
                const Scalar xnn = 1.0 - xnw;
 
                // first, xww:
                // xnw * pn = "actual" (hypothetical) vapor pressure
                // fugacityCoefficient * pw = vapor pressure given by thermodynamic conditions
                // Here, xww is not actually the mole fraction of water in the wetting phase
                // xww is only the ratio of "actual" vapor pressure / "thermodynamic" vapor pressure
                // If xww > 1 : gas is over-saturated with water vapor,
                // condensation takes place (see switch criterion in model)
                const Scalar xww = xnw*p1/( FluidSystem::fugacityCoefficient(fluidState, phase0Idx, comp0Idx)*p0 );
 
                // second, xwn:
                // partialPressure / xwn = Henry
                // partialPressure = xnn * pn
                // xwn = xnn * pn / Henry
                // Henry = fugacityCoefficient * pw
                const Scalar xwn = xnn*p1/( FluidSystem::fugacityCoefficient(fluidState, phase0Idx, comp1Idx)*p0 );
 
                fluidState.setMoleFraction(phase0Idx, comp0Idx, xww);
                fluidState.setMoleFraction(phase0Idx, comp1Idx, xwn);
            }
        }
        else if (phasePresence == firstPhaseOnly)
        {
            // only the wetting phase is present, i.e. wetting phase
            // composition is stored explicitly.
            if( useMoles() ) // mole-fraction formulation
            {
                fluidState.setMoleFraction(phase0Idx, comp0Idx, 1-priVars[switchIdx]);
                fluidState.setMoleFraction(phase0Idx, comp1Idx, priVars[switchIdx]);
            }
            // setMassFraction() has only to be called 1-numComponents times
            else // mass-fraction formulation
                fluidState.setMassFraction(phase0Idx, comp1Idx, priVars[switchIdx]);
 
            // calculate the composition of the remaining phases (as
            // well as the densities of all phases). This is the job
            // of the "ComputeFromReferencePhase" constraint solver
            if (useConstraintSolver)
                ComputeFromReferencePhase::solve(fluidState,
                                                 paramCache,
                                                 phase0Idx);
            // ... or calculated explicitly this way ...
            else
            {
                // note that the gas phase is actually not existing!
                // thus, this is used as phase switch criterion
                const Scalar xwn = priVars[switchIdx];
 
                // first, xnw:
                // psteam = xnw * pn = partial pressure of water in gas phase
                // psteam = fugacityCoefficient * pw
                const Scalar xnw = ( FluidSystem::fugacityCoefficient(fluidState, phase0Idx, comp0Idx)*p0 )/p1;
 
                // second, xnn:
                // xwn = partialPressure / Henry
                // partialPressure = pn * xnn
                // xwn = pn * xnn / Henry
                // xnn = xwn * Henry / pn
                // Henry = fugacityCoefficient * pw
                const Scalar xnn = xwn*( FluidSystem::fugacityCoefficient(fluidState, phase0Idx, comp1Idx)*p0 )/p1;
 
                fluidState.setMoleFraction(phase1Idx, comp1Idx, xnn);
                fluidState.setMoleFraction(phase1Idx, comp0Idx, xnw);
            }
        }
 
        for (int phaseIdx = 0; phaseIdx < ModelTraits::numFluidPhases(); ++phaseIdx)
        {
            // set the viscosity and desity here if constraintsolver is not used
            if(!useConstraintSolver)
            {
                paramCache.updateComposition(fluidState, phaseIdx);
                const Scalar rho = FluidSystem::density(fluidState, paramCache, phaseIdx);
                fluidState.setDensity(phaseIdx, rho);
                Scalar rhoMolar = FluidSystem::molarDensity(fluidState, paramCache, phaseIdx);
                fluidState.setMolarDensity(phaseIdx, rhoMolar);
            }
 
            // compute and set the enthalpy
            const Scalar mu = FluidSystem::viscosity(fluidState, paramCache, phaseIdx);
            fluidState.setViscosity(phaseIdx,mu);
            Scalar h = EnergyVolVars::enthalpy(fluidState, paramCache, phaseIdx);
            fluidState.setEnthalpy(phaseIdx, h);
        }
   }
 
};

template <class Traits, bool useConstraintSolver>
class TwoPTwoCVolumeVariablesImplementation<Traits, true, useConstraintSolver>
: public TwoPTwoCVolumeVariablesBase<Traits, TwoPTwoCVolumeVariablesImplementation<Traits, true, useConstraintSolver>>
{
    using ParentType = TwoPTwoCVolumeVariablesBase< Traits, TwoPTwoCVolumeVariablesImplementation<Traits, true, useConstraintSolver>>;
    using EnergyVolVars = EnergyVolumeVariables<Traits, TwoPTwoCVolumeVariables<Traits> >;
 
    using Scalar = typename Traits::PrimaryVariables::value_type;
    using ModelTraits = typename Traits::ModelTraits;
 
    static constexpr int numFluidComps = ParentType::numFluidComponents();
    // component indices
    enum
    {
        comp0Idx = Traits::FluidSystem::comp0Idx,
        comp1Idx = Traits::FluidSystem::comp1Idx,
        phase0Idx = Traits::FluidSystem::phase0Idx,
        phase1Idx = Traits::FluidSystem::phase1Idx
    };
 
    // phase presence indices
    enum
    {
        firstPhaseOnly = ModelTraits::Indices::firstPhaseOnly,
        secondPhaseOnly = ModelTraits::Indices::secondPhaseOnly,
        bothPhases = ModelTraits::Indices::bothPhases
    };
 
    // primary variable indices
    enum
    {
        switchIdx = ModelTraits::Indices::switchIdx,
        pressureIdx = ModelTraits::Indices::pressureIdx
    };
 
    // formulations
    static constexpr auto formulation = ModelTraits::priVarFormulation();
 
    using PermeabilityType = typename Traits::PermeabilityType;
    using ComputeFromReferencePhase = Dumux::ComputeFromReferencePhase<Scalar, typename Traits::FluidSystem>;
    using MiscibleMultiPhaseComposition = Dumux::MiscibleMultiPhaseComposition< Scalar, typename Traits::FluidSystem >;
 
public:
    using FluidState = typename Traits::FluidState;
    using FluidSystem = typename Traits::FluidSystem;
    using SolidState = typename Traits::SolidState;
    using SolidSystem = typename Traits::SolidSystem;
    using PrimaryVariableSwitch = TwoPNCPrimaryVariableSwitch;

    static constexpr bool useMoles() { return ModelTraits::useMoles(); }
    static constexpr TwoPFormulation priVarFormulation() { return formulation; }
 
    // check for permissive combinations
    static_assert(useMoles() || (!useMoles() && useConstraintSolver), "if !UseMoles, UseConstraintSolver has to be set to true");
    static_assert((formulation == TwoPFormulation::p0s1 || formulation == TwoPFormulation::p1s0), "Chosen TwoPFormulation not supported!");
 
    // The computations in the explicit composition update most probably assume a liquid-gas interface with
    // liquid as first phase. TODO: is this really needed? The constraint solver does the job anyway, doesn't it?
    static_assert(useConstraintSolver || (!FluidSystem::isGas(phase0Idx) && FluidSystem::isGas(phase1Idx)),
                   "Explicit composition calculation has to be re-checked for NON-liquid-gas equilibria");

    template<class ElemSol, class Problem, class Element, class Scv>
    void completeFluidState(const ElemSol& elemSol,
                            const Problem& problem,
                            const Element& element,
                            const Scv& scv,
                            FluidState& fluidState,
                            SolidState& solidState)
    {
        ParentType::completeFluidState(elemSol, problem, element, scv, fluidState, solidState);
 
        const auto& priVars = elemSol[scv.localDofIndex()];

        // set the fluid compositions
        typename FluidSystem::ParameterCache paramCache;
        paramCache.updateAll(fluidState);
 
        updateMoleFraction(fluidState,
                           paramCache,
                           priVars);
 
 
        for (int phaseIdx = 0; phaseIdx < ModelTraits::numFluidPhases(); ++phaseIdx)
        {
            // compute and set the enthalpy
            const Scalar mu = FluidSystem::viscosity(fluidState, paramCache, phaseIdx);
            fluidState.setViscosity(phaseIdx,mu);
            Scalar h = EnergyVolVars::enthalpy(fluidState, paramCache, phaseIdx);
            fluidState.setEnthalpy(phaseIdx, h);
        }
   }

   void updateMoleFraction(FluidState &actualFluidState,
                           typename Traits::FluidSystem::ParameterCache & paramCache,
                           const typename Traits::PrimaryVariables& priVars)
   {
        const auto phasePresence = priVars.state();
 
        Scalar xwnNonEquil = 0.0;
        Scalar xwwNonEquil = 0.0;
        Scalar xnwNonEquil = 0.0;
        Scalar xnnNonEquil = 0.0;
 
        if (phasePresence == bothPhases)
        {
            xwnNonEquil = priVars[ModelTraits::numFluidPhases()];
            xwwNonEquil = 1-xwnNonEquil;
            xnwNonEquil = priVars[ModelTraits::numFluidPhases()+comp1Idx];
 
            //if the capillary pressure is high, we need to use Kelvin's equation to reduce the vapor pressure
            if (actualFluidState.saturation(phase0Idx) < 0.01)
            {
                const Scalar p1 = actualFluidState.pressure(phase1Idx);
                const Scalar partPressLiquid = FluidSystem::vaporPressure(actualFluidState, comp0Idx);
                xnwNonEquil =std::min(partPressLiquid/p1, xnwNonEquil);
            }
            xnnNonEquil = 1- xnwNonEquil;
 
            actualFluidState.setMoleFraction(phase0Idx, comp0Idx, xwwNonEquil);
            actualFluidState.setMoleFraction(phase0Idx, comp1Idx, xwnNonEquil);
            actualFluidState.setMoleFraction(phase1Idx, comp0Idx, xnwNonEquil);
            actualFluidState.setMoleFraction(phase1Idx, comp1Idx, xnnNonEquil);
 
            //check if we need this
            for(int phaseIdx=0; phaseIdx<ModelTraits::numFluidPhases(); ++phaseIdx)
                for (int compIdx = 0; compIdx < numFluidComps; ++compIdx)
                {
                    const Scalar phi = FluidSystem::fugacityCoefficient(actualFluidState,
                                                                        paramCache,
                                                                        phaseIdx,
                                                                        compIdx);
                    actualFluidState.setFugacityCoefficient(phaseIdx,
                                                            compIdx,
                                                            phi);
                }
 
            FluidState equilFluidState; // the fluidState *on the interface* i.e. chemical equilibrium
            equilFluidState.assign(actualFluidState) ;
            // If constraint solver is not used, get the phase pressures and set the fugacity coefficients here
            if(!useConstraintSolver)
            {
                for (int phaseIdx = 0; phaseIdx < ModelTraits::numFluidPhases(); ++ phaseIdx)
                {
                    assert(FluidSystem::isIdealMixture(phaseIdx));
                    for (int compIdx = 0; compIdx < ModelTraits::numFluidComponents(); ++ compIdx) {
                        Scalar phi = FluidSystem::fugacityCoefficient(equilFluidState, paramCache, phaseIdx, compIdx);
                        equilFluidState.setFugacityCoefficient(phaseIdx, compIdx, phi);
                    }
                }
            }
 
            // now comes the tricky part: calculate phase compositions
            const Scalar p0 = equilFluidState.pressure(phase0Idx);
            const Scalar p1 = equilFluidState.pressure(phase1Idx);
            // both phases are present, phase compositions are a result
            // of the equilibrium between the phases. This is the job
            // of the "MiscibleMultiPhaseComposition" constraint solver
            if(useConstraintSolver)
                MiscibleMultiPhaseComposition::solve(equilFluidState,
                                                     paramCache);
            // ... or calculated explicitly this way ...
            else
            {
                // get the partial pressure of the main component of the first phase within the
                // second phase == vapor pressure due to equilibrium. Note that in this case the
                // fugacityCoefficient * p is the vapor pressure (see implementation in respective fluidsystem)
                const Scalar partPressLiquid = FluidSystem::fugacityCoefficient(equilFluidState, phase0Idx, comp0Idx)*p0;
 
                // get the partial pressure of the main component of the gas phase
                const Scalar partPressGas = p1 - partPressLiquid;
 
                // calculate the mole fractions of the components within the nonwetting phase
                const Scalar xnn = partPressGas / p1;
                const Scalar xnw = partPressLiquid / p1;
 
                // calculate the mole fractions of the components within the wetting phase
                // note that in this case the fugacityCoefficient * p is the Henry Coefficient
                // (see implementation in respective fluidsystem)
                const Scalar xwn = partPressGas / (FluidSystem::fugacityCoefficient(equilFluidState, phase0Idx, comp1Idx)*p0);
                const Scalar xww = 1.0 - xwn;
 
                // set all mole fractions
                equilFluidState.setMoleFraction(phase0Idx, comp0Idx, xww);
                equilFluidState.setMoleFraction(phase0Idx, comp1Idx, xwn);
                equilFluidState.setMoleFraction(phase1Idx, comp0Idx, xnw);
                equilFluidState.setMoleFraction(phase1Idx, comp1Idx, xnn);
            }
 
            // Setting the equilibrium composition (in a kinetic model not necessarily the same as the actual mole fraction)
            for(int phaseIdx=0; phaseIdx<ModelTraits::numFluidPhases(); ++phaseIdx){
                for (int compIdx=0; compIdx< numFluidComps; ++ compIdx){
                    xEquil_[phaseIdx][compIdx] = equilFluidState.moleFraction(phaseIdx, compIdx);
                }
            }
        }
        else
        {
            DUNE_THROW(Dune::InvalidStateException, "nonequilibrium is only possible for 2 phases present ");
        }
        // compute densities of all phases
        for(int phaseIdx=0; phaseIdx<ModelTraits::numFluidPhases(); ++phaseIdx)
        {
            const Scalar rho = FluidSystem::density(actualFluidState, paramCache, phaseIdx);
            actualFluidState.setDensity(phaseIdx, rho);
            const Scalar rhoMolar = FluidSystem::molarDensity(actualFluidState, paramCache, phaseIdx);
            actualFluidState.setMolarDensity(phaseIdx, rhoMolar);
        }
   }

    const Scalar xEquil(const unsigned int phaseIdx, const unsigned int compIdx) const
    {
        return xEquil_[phaseIdx][compIdx] ;
    }
 
private:
    std::array<std::array<Scalar, numFluidComps>, ModelTraits::numFluidPhases()> xEquil_;
};
 
} // end namespace Dumux
 
#endif