porousmediumflow/2p2c/model.hh File Reference

Properties for a two-phase, two-component model for flow in porous media. More...

#include <array>
#include <dumux/common/properties.hh>
#include <dumux/porousmediumflow/2pnc/model.hh>
#include <dumux/porousmediumflow/2p/formulation.hh>
#include <dumux/porousmediumflow/nonisothermal/model.hh>
#include <dumux/porousmediumflow/nonisothermal/iofields.hh>
#include <dumux/porousmediumflow/nonequilibrium/model.hh>
#include <dumux/porousmediumflow/nonequilibrium/volumevariables.hh>
#include <dumux/material/fluidmatrixinteractions/2p/thermalconductivity/somerton.hh>
#include <dumux/material/fluidmatrixinteractions/2p/thermalconductivity/simplefluidlumping.hh>
#include "volumevariables.hh"

Go to the source code of this file.

Description

Properties for a two-phase, two-component model for flow in porous media.

This model implements two-phase two-component flow of two compressible and partially miscible fluids $\alpha \in \{ w, n \}$ composed of the two components $\kappa \in \{ \kappa_w, \kappa_n \}$, where $\kappa_w$ and $\kappa_n$ are the main components of the wetting and nonwetting phases, respectively. The governing equations are the mass or the mole conservation equations of the two components, depending on the property UseMoles. The mass balance equations are given as:

$$\phi \frac{\partial (\sum_\alpha \rho_\alpha X_\alpha^\kappa S_\alpha)}{\partial t} - \sum_\alpha \text{div} \left\{ \rho_\alpha X_\alpha^\kappa v_\alpha \right\} - \sum_\alpha \text{div} \mathbf{F}_{\mathrm{diff, mass}, \alpha}^\kappa - \sum_\alpha q_\alpha^\kappa = 0 \qquad \kappa \in \{\kappa_w, \kappa_n\} \, , \alpha \in \{w, n\},$$

using the mass fractions $X_\alpha^\kappa$ and the mass densities $\rho_\alpha$, while the mole balance equations use the mole fractions $x_\alpha^\kappa$ and molar densities $\varrho_{m, \alpha}$:

$$\phi \frac{\partial (\sum_\alpha \varrho_{m, \alpha} x_\alpha^\kappa S_\alpha)}{\partial t} + \sum_\alpha \text{div} \left\{ \varrho_{m, \alpha} x_\alpha^\kappa v_\alpha \right\} + \sum_\alpha \text{div} \mathbf{F}_{\mathrm{diff, mole}, \alpha}^\kappa - \sum_\alpha q_\alpha^\kappa = 0 \qquad \kappa \in \{\kappa_w, \kappa_n\} \, , \alpha \in \{w, n\}.$$

Boundary conditions and sources have to be defined by the user in the corresponding units. The default setting for the property UseMoles can be found in the 2pnc model.

Per default, the Darcy's and Fick's law are used for the fluid phase velocities and the diffusive fluxes, respectively. See dumux/flux/darcyslaw.hh and dumux/flux/fickslaw.hh for more details.

By using constitutive relations for the capillary pressure $p_c = p_n - p_w$ and relative permeability $k_{r\alpha}$ and taking advantage of the fact that $S_w + S_n = 1$ and $x^{\kappa_w}_\alpha + x^{\kappa_n}_\alpha = 1$, the number of unknowns can be reduced to two. In single-phase regimes, the used primary variables are either $p_w$ and $S_n$ (default) or $p_n$ and $S_w$. The formulation which ought to be used can be specified by setting the Formulation property to either TwoPTwoCFormulation::pwsn or TwoPTwoCFormulation::pnsw.

In two-phase flow regimes the second primary variable depends on the phase state and is the mole or mass fraction (depending on the property UseMoles). The following cases can be distinguished:

• Both phases are present: The saturation is used (either $S_n$ or $S_w$, dependent on the chosen Formulation), as long as $0 < S_\alpha < 1$.
• Only wetting phase is present: The mole fraction of the nonwetting phase main component in the wetting phase $x^{\kappa_n}_w$ is used, as long as the maximum mole fraction is not exceeded $(x^{\kappa_n}_w<x^{\kappa_n}_{w,max})$
• Only nonwetting phase is present: The mole fraction of the wetting phase main component in the nonwetting phase, $x^{\kappa_w}_n$, is used, as long as the maximum mole fraction is not exceeded $(x^{\kappa_w}_n<x^{\kappa_w}_{n,max})$

Classes
struct	Dumux::Properties::TTag::TwoPTwoC
struct	Dumux::Properties::TTag::TwoPTwoCNI
struct	Dumux::Properties::BaseModelTraits< TypeTag, TTag::TwoPTwoC >
	Set the model traits property. More...
struct	Dumux::Properties::ModelTraits< TypeTag, TTag::TwoPTwoC >
struct	Dumux::Properties::VolumeVariables< TypeTag, TTag::TwoPTwoC >
	Use the 2p2c VolumeVariables. More...
struct	Dumux::Properties::UseConstraintSolver< TypeTag, TTag::TwoPTwoC >
	Determines whether the constraint solver is used. More...
struct	Dumux::Properties::ModelTraits< TypeTag, TTag::TwoPTwoCNI >
	Set the non-isothermal model traits. More...
struct	Dumux::Properties::VolumeVariables< TypeTag, TTag::TwoPTwoCNI >
	Set the volume variables property. More...
struct	Dumux::Properties::IOFields< TypeTag, TTag::TwoPTwoCNI >
	Set non-isothermal output fields. More...
struct	Dumux::Properties::ThermalConductivityModel< TypeTag, TTag::TwoPTwoCNI >
	Somerton is used as default model to compute the effective thermal heat conductivity. More...
struct	Dumux::TwoPTwoCUnconstrainedModelTraits< TwoPTwoCModelTraits >
struct	Dumux::Properties::TTag::TwoPTwoCNonEquil
struct	Dumux::Properties::EquilibriumLocalResidual< TypeTag, TTag::TwoPTwoCNonEquil >
struct	Dumux::Properties::EquilibriumIOFields< TypeTag, TTag::TwoPTwoCNonEquil >
	Set the vtk output fields specific to this model. More...
struct	Dumux::Properties::ModelTraits< TypeTag, TTag::TwoPTwoCNonEquil >
struct	Dumux::Properties::EquilibriumModelTraits< TypeTag, TTag::TwoPTwoCNonEquil >
	Set equilibrium model traits. More...
struct	Dumux::Properties::ThermalConductivityModel< TypeTag, TTag::TwoPTwoCNonEquil >
struct	Dumux::Properties::VolumeVariables< TypeTag, TTag::TwoPTwoCNonEquil >
	Use the nonequilibrium volume variables together with the 2p2c vol vars. More...
struct	Dumux::Properties::TTag::TwoPTwoCNINonEquil
struct	Dumux::Properties::ModelTraits< TypeTag, TTag::TwoPTwoCNINonEquil >
	Set the non-isothermal model traits with the nonequilibrium model traits as isothermal traits. More...
struct	Dumux::Properties::EquilibriumIOFields< TypeTag, TTag::TwoPTwoCNINonEquil >
	Set the equilibrium IO fields which are in that case the nonisothermal io fields. More...
struct	Dumux::Properties::VolumeVariables< TypeTag, TTag::TwoPTwoCNINonEquil >
	Use the nonequilibrium volume variables together with the 2p2c vol vars. More...
struct	Dumux::Properties::ThermalConductivityModel< TypeTag, TTag::TwoPTwoCNINonEquil >
	Somerton is used as default model to compute the effective thermal heat conductivity. More...

Namespaces
namespace	Dumux
	Adaption of the non-isothermal two-phase two-component flow model to problems with CO2.
namespace	Dumux::Properties
namespace	Dumux::Properties::TTag
	Type tag for numeric models.

Include dependency graph for porousmediumflow/2p2c/model.hh: